Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUID MECHANICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Plasma drift-kinetic equation calculations in three-dimensional magnetic geometries

A new code to simulate three-dimensional plasmas in complex toroidal geometries is presented. It solves drift-kinetic equations for the one-particle distribution function f based on their projection onto a functional basis consisting of an arbitrary number of Legendre-Laguerre polynomials. In this paper, these theoretical aspects of the code are exposed together with their relation with the standard formalism. Comparisons with neoclassical theory for the large aspect ratio case and first calculations in the geometry of the TJ-II Heliac are also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of magnetic field on the structure of Coulomb crystal in dusty plasma

A molecular dynamics code is developed to study the formation of dust crystal and phase transition of a three-dimensional dusty plasma system in the presence of magnetic field. Under the influence of the magnetic field, the interaction potential among the grains gets modified and becomes anisotropic. The pair correlation function has been calculated to characterize the structural properties of the dusty plasma for different values of magnetic field strength. The phase diagram in the GAMMA-kappa plane is plotted for the system for different values of magnetic field strength. This diagram shows the existence of three phases: solid (fcc-like), solid (bcc-like), and fluid phases. It is seen that as the value of the magnetic field gets higher, the triple point shifts toward the lower value of the screening constant but higher value of Coulomb coupling parameter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Entropy production rate in tokamaks with nonaxisymmetric magnetic fields

A variational principle based on an extremum of entropy production rate is derived for an integrable Hamiltonian system in the presence of two perturbations, which are resonant on neighboring or identical resonant surfaces. This method can be used to calculate the neoclassical transport in a magnetic fusion device with a nonaxisymmetric magnetic field. When applied to a tokamak with ripple, it provides an efficient means to discriminate between various regimes, depending on collisionality and ripple amplitude. This technique provides a means to test simplified collision operators suitable for gyrokinetic codes. It is found that these operators need only satisfy modest requirements in order to recover the correct neoclassical equilibrium, at least in the large aspect ratio limit. Finally, it appears that the toroidal viscous damping rate due to ripple is usually not negligible, thus removing the degeneracy between the radial electric field and the toroidal velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluid and drift-kinetic description of a magnetized plasma with low collisionality and slow dynamics orderings. I. Electron theory

A closed theoretical model to describe slow, macroscopic plasma processes in a fusion-relevant collisionality regime is set forward. This formulation is a hybrid one, with fluid conservation equations for particle number, momentum and energy, and drift-kinetic closures. Intended for realistic application to the core of a high-temperature tokamak plasma, the proposed approach is unconventional in that the ion collisionality is ordered lower than in the ion banana regime of neoclassical theory. The present first part of a two-article series concerns the electron system, which is still equivalent to one based on neoclassical electron banana orderings. This system is derived such that it ensures the precise compatibility among the complementary fluid and drift-kinetic equations, and the rigorous treatment of the electric field and the Fokker-Planck-Landau collision operators. As an illustrative application, the special limit of an axisymmetric equilibrium is worked out in detail.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resonant field amplification with feedback-stabilized regime in current driven resistive wall mode

The stability and resonant field response of current driven resistive wall modes are numerically studied for DIII-D [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] low pressure plasmas. The resonant field response of the feedback-stabilized resistive wall mode is investigated both analytically and numerically, and compared with the response from intrinsically stable or marginally stable modes. The modeling qualitatively reproduces the experimental results. Furthermore, based on some recent results and on the indirect numerical evidence in this work, it is suggested that the mode stability behavior observed in DIII-D experiments is due to the kink-peeling mode stabilization by the separatrix geometry. The phase inversion radius of the computed plasma displacement does not generally coincide with the radial locations of rational surfaces, also supporting experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A similarity reduction of the Grad-Shafranov equation

A direct method for finding similarity reductions of partial differential equations is applied to a specific case of the Grad-Shafranov equation. As an illustration of the method, the frequently used Solov'ev equilibrium is derived. The method is employed to obtain a new family of exact analytical solutions, which contain both the classical and nonclassical group-invariant solutions of the Grad-Shafranov equation and thus greatly extends the range of the available analytical solutions. All the group-invariant solutions based on the classical Lie symmetries are shown to be particular cases in the new family of solutions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wave-number spectral scaling law of drift wave-zonal flow turbulence in gyrofluid simulations

Wave-number spectral characteristics of ion temperature gradient (ITG) turbulence are investigated based on three-dimensional gyrofluid simulation. The focus is on the back reaction of the self-generated zonal flows (ZFs) on the ambient turbulence through nonlinear mode coupling. Detailed spectral analyses evidently show that the radial wave-number spectra of the ITG-ZF turbulence is characterized by an exponential-law scaling, which is deformed from the usual Kolmogorov-like power law by the back reaction of the ZFs. These results are qualitatively in agreement with a theoretical prediction [Guercan et al., Phys. Rev. Lett. 102, 255002 (2009)] and fairly match with the experimental observation of the density fluctuation spectrum [Hennequin et al., Plasma Phys. Controlled Fusion 46, B121 (2004)]. The generality of such spectral characteristics in drift wave turbulence with large-scale coherent structures is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lightweight Steel Solutions for Automotive Industry

Recently, improvement in fuel efficiency and safety has become the biggest issue in worldwide automotive industry. Although the regulation of environment and safety has been tightened up more and more, the majority of vehicle bodies are still manufactured from stamped steel components. This means that the optimized steel solutions enable to demonstrate its ability to reduce body weight with high crashworthiness performance instead of expensive light weight materials such as Al, Mg and composites. To provide the innovative steel solutions for automotive industry, POSCO has developed AHSS and its application technologies, which is directly connected to EVI activities. EVI is a technical cooperation program with customer covering all stages of new car project from design to mass production. Integrated light weight solutions through new forming technologies such as TWB, hydroforming and HPF are continuously developed and provided for EVI activities. This paper will discuss the detailed status of these technologies especially light weight steel solutions based on innovative technologies.

42 ENGINEERING↗

Linear and nonlinear development of m=0 instability in a diffuse Bennett Z-pinch equilibrium with sheared axial flow

The effect of sheared axial flow on the Z-pinch sausage instability has been examined with two-dimensional magnetohydrodynamic simulations. Diffuse Bennett equilibria in the presence of axial flows with parabolic and linear radial profiles have been considered, and a detailed study of the linear and nonlinear development of small perturbations from these equilibria has been performed. The consequences of both single-wavelength and random-seed perturbations were calculated. It was found that sheared flows changed the internal m=0 mode development by reducing the linear growth rates, decreasing the saturation amplitude, and modifying the instability spectrum. High spatial frequency modes were stabilized to small amplitudes and only long wavelengths continued to grow. Full stability was obtained for supersonic plasma flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The parametric decay of Alfven waves into shear Alfven waves and dust lower hybrid waves

The parametric decay instability of Alfven wave into low-frequency electrostatic dust-lower-hybrid and electromagnetic shear Alfven waves has been investigated in detail in a dusty plasma in the presence of external/ambient uniform magnetic field. Magnetohydrodynamic fluid equations of plasmas have been employed to find the linear and nonlinear response of the plasma particles for this three-wave nonlinear coupling in a dusty magnetoplasma. Here, relatively high frequency electromagnetic Alfven wave has been taken as the pump wave. It couples with other two low-frequency internal possible modes of the dusty magnetoplasma, viz., the dust-lower-hybrid and shear Alfven waves. The nonlinear dispersion relation of the dust-lower-hybrid wave has been solved to obtain the growth rate of the parametric decay instability. The growth rate is maximum for small value of external magnetic field B{sub s}. It is noticed that the growth rate is proportional to the unperturbed electron number density n{sub oe}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Drift-Alfven waves induced optical emission fluctuations in Aditya tokamak

In Aditya tokamak [S. B. Bhatt et al. Indian J. Pure Appl. Phys. 27, 710 (1989)], an increase in the H{sub a}lpha and C{sup 2+} intensity fluctuations from the edge region is observed with an increase in the magnetohydrodynamic (MHD) activity. Very small fluctuation amplitudes of H{sub a}lpha and C{sup 2+} intensity are observed in discharges where there is no MHD activity compared to the discharges with MHD activity. These fluctuations in the H{sub a}lpha and C{sup 2+}, measured by optical filter--photomultiplier tube combination--are modulated by Mirnov oscillations having a dominant peak with a common frequency approx7-10 kHz. Further investigation reveals the presence of strong coherent fluctuations in density and floating potential at same frequency as well. These observations indicate the existence of a nonelectrostatic instability, which may be based on the coupled mode of the drift mode and the Alfven mode. The coherent density fluctuations give rise to the experimentally observed coherent H{sub a}lpha and C{sup 2+} intensity fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulence driven magnetic reconnection causing long-wavelength magnetic islands

Magnetic reconnection caused by turbulence in a current sheet is studied by means of numerical simulations of fluid equations. It is found that turbulence produces long-wavelength magnetic islands even if the current sheet is so thick that spontaneous magnetic reconnection does not occur. Thus, turbulence modifies the threshold of magnetic island formation predicted by the conventional theory of spontaneous magnetic reconnection in a current sheet. In spite of the fact that the turbulence is driven by a short-wavelength instability due to a pressure gradient, the length of the magnetic island is the same order as the system size. The width of the island is several times the ion Larmor radius, and stronger turbulence causes wider magnetic islands. This suggests that the turbulence can trigger neoclassical tearing modes, which are the main nonlinear instability that limits the plasma pressure in magnetically confined plasmas. The long-wavelength magnetic island is formed by merging of small-scale magnetic islands.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-organization and symmetry-breaking in two-dimensional plasma turbulence

The spontaneous self-organization of two-dimensional magnetized plasma is investigated within the framework of magnetohydrodynamics with a particular emphasis on the symmetry-breaking induced by the shape of the confining boundaries. This symmetry-breaking is quantified by the angular momentum, which is shown to be generated rapidly and spontaneously from initial conditions free from angular momentum as soon as the geometry lacks axisymmetry. This effect is illustrated by considering circular, square, and elliptical boundaries. It is shown that the generation of angular momentum in nonaxisymmetric geometries can be enhanced by increasing the magnetic pressure. The effect becomes stronger at higher Reynolds numbers. The generation of magnetic angular momentum (or angular field), previously observed at low Reynolds numbers, becomes weaker at larger Reynolds numbers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A method for finding three-dimensional magnetic skeletons

Magnetic fields are an essential component of a plasma. In many astrophysical, solar, magnetospheric, and laboratory situations the magnetic field in the plasma can be very dynamic and form highly complex structures. One approach to unraveling these structures is to determine the magnetic skeleton of the field, a set of topological features that divide the magnetic field into topologically distinct domains. In general, the features of the magnetic skeleton are difficult to locate, in particular those given by numerical experiments. In this paper, we propose a new set of tools to find the skeleton of general magnetic fields including null points, spines, separatrix surfaces, and separators. This set of tools is found to be considerably better at finding the skeleton than the currently favored methods used in magnetohydrodynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scales of guide field reconnection at the hydrogen mass ratio

We analyze the signatures of component reconnection for a Harris current sheet with a guide field using the physical mass ratio of hydrogen. The study uses the fully kinetic particle in cell code IPIC3D to investigate the scaling with mass ratio of the following three main component reconnection features: electron density cavities along the separatrices, channels of fast electron flow within the cavities, and electron phase space holes due to the Buneman instability in the electron high speed channels. The width and strength of the electron holes and of the electron cavities are studied up the mass ratio proper of hydrogen, considering the effect of the simulation box size, and of the boundary conditions. The results compare favorably with the existing data from the Cluster and Themis missions and provide quantitative predictions for realistic conditions to be encountered by the planned magnetospheric multiscale mission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wall forces produced during ITER disruptions

Nonlinear simulations with the M3D code [W. Park et al., Phys. Plasmas 6, 1796 (1999)] are performed of disruptions produced by large scale magnetohydrodynamic instabilities. The toroidally asymmetric wall forces produced during a disruption are calculated in an ITER [T. Hender et al., Nucl. Fusion 47, S128 (2007)] model. The disruption is produced by a vertical displacement event and a kink mode. Expressions are derived for the wall force, including the sideways force, using a thin conducting wall model. The scaling of wall force with {gamma}{tau}{sub w} is obtained, where {gamma} is the kink growth rate and {tau}{sub w} is the wall penetration time. The largest force occurs with {gamma}{tau}{sub w{approx_equal}}1. A theory is developed of the wall force produced by kink modes. The theory is in qualitative agreement with the simulations and Joint European Torus [V. Riccardo et al., Nucl. Fusion 49, 055012 (2009)] experiments. In particular, the theory and simulations give dependence of the sideways on {gamma}{tau}{sub w}, correlation of sideways force with sideways plasma displacement, and correlation of toroidally varying plasma current with toroidally varying vertical displacement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Topological complexity and tangential discontinuity in magnetic fields

This is a study of the topological magnetostatic problem. A magnetic field embedded in a perfectly conducting fluid and rigidly anchored at its boundary has a specific topology invariant for all time. Subject to that topology, the force-free state of such a field generally requires the presence of tangential discontinuities (TDs). This property proposed and demonstrated by Parker [Spontaneous Current Sheets in Magnetic Fields (Oxford University Press, New York, 1994)] is explained in terms of (i) the overdetermined nature of the magnetostatic partial differential equations nonlinearly coupled to the integral equations imposing the field topology and (ii) the hyperbolic nature of the partial differential equation for the twist function {alpha} of the force-free field. The mathematical analysis elucidates a basic incompatibility between preserving a complex field topology and attaining equilibrium, if analyticity is assumed. Physics avoids this incompatibility via TD formation as a natural consequence of perfect conductivity. The study relates TD formation to topological complexity in two-dimensional and three-dimensional fields, as well as the topological connectivity and geometric shape of the field domain. Mathematical points made are given physical interpretations, but important topological concepts for understanding spontaneous TDs have remained incomplete. As an application, examples are presented to define twisted and untwisted potential fields found in simply and multiply connected domains, clarifying a confusion in several recent publications. Appendix A treats the expression of the frozen-in condition by a continuum of conserved, total generalized helicities. Appendix B reports briefly on concurrent developments showing that a published objection to the theory of spontaneous TDs is based upon a misunderstanding of the theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of the implosion and stagnation of compact wire arrays

Wire array z-pinches have been used successfully for many years as a powerful x-ray source, as a dynamic hohlraum, and as an intense K-shell radiation source. Significant progress has been made in the effective modeling of these three-dimensional (3D) resistive plasmas. However, successful modeling also requires an accurate representation of the power delivered to these loads from the generator, which is an uncertainty potentially as large as the magnetohydrodynamic (MHD) implosion dynamics. We present 3D resistive MHD simulations of wire arrays that are coupled to transmission line equivalent models of the Z generator, driven by voltage sources derived directly from electrical measurements. Significant (multi-mega-ampere) current losses are shown to occur in both the convolute and the final feed. This limits the array performance and must be correctly accounted for to accurately represent the generator response to the load. Our simulations are validated against data for compact: 20 mm diameter, 10 mm long wire arrays that have produced the highest x-ray power densities on Z. This is one of the most comprehensive experimental data sets for single and nested wire arrays and includes voltage, current, x-ray power and energy, and multiple mass distribution measurements. These data tightly constrain our simulation results and allow us to describe in detail both the implosion and stagnation, and how energy is delivered to, and radiated from z-pinch loads. We show that the radiated power is consistent with the kinetic energy delivered to a distributed 3D mass profile over its implosion and stagnation. We also demonstrate how the local inductance of the transmission line connecting to the wire array is responsible for delivering more than 50% of the total radiated power. This makes the power output dependent on the design of specific elements of the generator, and their response to the imploding load, and not just on the peak current that can be delivered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗