Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERROMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Fabrication and Investigation of Indium Nitride Possessing Ferromagnetic Properties

An overview of the scientific literature since 2000 on InN doping with impurities giving it ferromagnetic properties and on the magnetic properties of InN is presented. According to theoretical and experimental studies, InN doped with transition metals and rare earth elements possesses ferromagnetic properties at temperatures above room temperature and is a material promising for spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irradiation-induced magnetic ordering in SiC: Experimental results and a density functional study

Magnetism of 6H-SiC single crystals implanted with 3 MeV protons is studied both experimentally and theoretically. We found that proton irradiation can induce stable ferromagnetism in 6H-SiC with a Curie temperature above 300 K. There is a dose window available for tuning the magnetization of the samples. The maximum saturation magnetizations (0.17 emu/g) are three orders of magnitude larger than that reported in neutron-irradiated SiC crystals (1 × 10{sup −4} emu/g). First-principles calculations indicate that the ferromagnetism is related to the divacancy-related defects (V{sub Si}V{sub C} + nH, (n = 1–3)) generated under proton irradiation. This offers a promising route for the development of metal-free SiC magnets.

36 MATERIALS SCIENCE↗

Studies of magnetocaloric effect on spin-1/2 J{sub 1}-J{sub 2} Heisenberg hexagons

Magnetocaloric effect of four different spin-1/2 J{sub 1}-J{sub 2} Heisenberg hexagons has been studied in terms of adiabatic demagnetization. Four hexagons with different combinations of antiferromagnetic and ferromagnetic Heisenberg exchange interactions are considered. Level of frustration on those models is different. Studies on the magnetization process, nature of isentrops and properties of magnetocaloric effect have been carried out. Comparison of results on those models has been discussed.

36 MATERIALS SCIENCE↗

Diffused phase transitions in Pb(Zr{sub 0.65}Ti{sub 0.35})O{sub 3}-Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3} multiferroics

The solid solutions of (1−x)Pb(Zr{sub 0.65}Ti{sub 0.35})O{sub 3}-xPb(Fe{sub 2/3}W{sub 1/3})O{sub 3} in different ratios were fabricated by a high-temperature solid-state reaction method using high-purity oxides for possible multi-ferroic applications. Structural analysis using x-ray diffraction powder patterns of the system by Rietveld refinement method exhibits the formation of rhombohedral phase with R3c space group. Detailed studies of dielectric permittivity as a function of temperature of the systems show that the frequency independent dielectric maximum temperature shifts toward room temperature on increasing x. In addition to this, the degree of diffuseness of the permittivity anomaly is more pronounced for higher content of Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3}, implying the existence of a composition-induced diffuse phase transition for the limited range of compositional ratios. Detailed impedance spectroscopy analysis shows the contributions of grain, grain boundary, and interfacial polarizations in the resistive characteristics and conduction mechanism of the materials. The weak ferromagnetic and saturated ferroelectric loops indicate that system with x = 0.1, 0.2 have good multiferroic characteristics, and may be useful for future spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrothermal synthesis and magnetic properties of nanoplate-assembled hierarchical structured Co{sub 1-x}S microrods

Hierarchical structured Co{sub 1-x}S microrods have been first fabricated in a high yield by a one-pot complex-surfactant-assisted hydrothermal method. The microrod is assembled by numerous interleaving nanoplates. X-ray diffraction, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy spectrum, scanning electron microscopy, and transmission electron microscopy were used to characterize the samples. The mechanism for the formation of the hierarchical microstructures has been proposed. Additionally, the magnetic characterization suggests that the obtained Co{sub 1-x}S microrods are ferromagnetic at low temperature. - Highlights: Black-Right-Pointing-Pointer Hierarchical structured Co{sub 1-x}S microrods are fabricated by hydrothermal method. Black-Right-Pointing-Pointer The microrods are assembled by numerous interleaving nanoplates. Black-Right-Pointing-Pointer The growth mechanism of rodlike microstructures is proposed. Black-Right-Pointing-Pointer The obtained Co{sub 1-x}S microrods are ferromagnetic at low temperature.

36 MATERIALS SCIENCE↗

Relation between the magnetization and the electrical properties of alloy GaSb-MnSb films

The influence of the charge carrier concentration on the magnetic properties of GaSb-MnSb alloys is studied. The ferromagnetism of GaSb-MnSb films is caused by the presence of MnSb granules and manifests itself in both magnetometric measurements and the presence of an anisotropic magnetoresistance and the anomalous Hall effect. Electric conduction is executed by charge carriers (holes) in a GaSb matrix. The magnetization of clusters depends on stoichiometry and the concentration of Mn{sup 2+} and Mn{sup 3+} ions, which is specified by the film growth conditions. At high film growth temperatures, ferromagnetic clusters containing Mn{sup 2+} ions mainly form. At low growth temperatures, an antiferromagnetic phase containing Mn{sup 3+} ions forms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of the weak coupling of the IrMn/Co/Ru/NiFe structures by ferromagnetic resonance

The Ir{sub 20}Mn{sub 80}/Co/Ru/Ni{sub 81}Fe{sub 19} spin valve structures have been produced by sputtering deposition and analyzed by ferromagnetic resonance. Two well resolved modes are identified in the FMR spectra as the resonance of the Co and NiFe layers. The in-plane angular dependence of the resonance peaks for the NiFe layer present a small asymmetry, which is attributed to the interlayer exchange interaction between ferromagnetic layers across the nonmagnetic spacer. The data were analyzed considering the exchange bias at the IrMn/Co interface and the indirect coupling between Co and NiFe. The in-plane angular dependence of the resonance fields of both Co and NiFe layers present an upward (downward) shift for antiferromagnetic (ferromagnetic) coupling with respect to a system with no interlayer coupling.

36 MATERIALS SCIENCE↗

Versatile and Highly Efficient Controls of Reversible Topotactic Metal–Insulator Transitions through Proton Intercalation

The ability to tailor a new crystalline structure and associated functionalities with a variety of stimuli is one of the key issues in material design. Developing synthetic routes to functional materials with partially absorbed nonmetallic elements (i.e., hydrogen and nitrogen) can open up more possibilities for preparing novel families of electronically active oxide compounds. Here, fast and reversible uptake and release of hydrogen in epitaxial ABO 3 manganite films through an adapted low-frequency inductively coupled plasma technology is introduced. Compared with traditional dopants of metallic cations, the plasma-assisted hydrogen implantations not only produce reversibly structural transformations from pristine perovskite (PV) phase to a newly found protonation-driven brownmillerite one but also regulate remarkably different electronic properties driving the material from a ferromagnetic metal to a weakly ferromagnetic insulator for a range of manganite (La 1–x Sr x MnO 3 ) thin films. Moreover, a reversible perovskite-brownmillerite-perovskite transition is achieved at a relatively low temperature (T ≤ 350 °C), enabling multifunctional modulations for integrated electronic systems. The fast, low-temperature control of structural and electronic properties by the facile hydrogenation/dehydrogenation treatment substantially widens the space for exploring new possibilities of novel properties in proton-based multifunctional materials.

36 MATERIALS SCIENCE↗

Influences of annealing temperature on structural characterization and magnetic properties of Mn-doped BaTiO{sub 3} ceramics

Polycrystalline samples of BaTiO{sub 3} doped with 2.0 at. % Mn were prepared by solid-state reaction at various temperatures (T{sub an}) ranging from 500 to 1350 Degree-Sign C, used high-pure powders of BaCO{sub 3}, TiO{sub 2}, and MnCO{sub 3} as precursors. Experimental results obtained from x-ray diffraction patterns and Raman scattering spectra reveal that tetragonal Mn-doped BaTiO{sub 3} starts constituting as T{sub an} Almost-Equal-To 500 Degree-Sign C. The T{sub an} increase leads to the development of this phase. Interestingly, there is the tetragonal-hexagonal transformation in the crystal structure of BaTiO{sub 3} as T{sub an} Almost-Equal-To 1100 Degree-Sign C. Such the variations influence directly magnetic properties of the samples. Besides paramagnetic contributions of Mn{sup 2+} centers traced to electron spin resonance, the room-temperature ferromagnetism found in the samples is assigned to exchange interactions taking place between Mn{sup 3+} and Mn{sup 4+} ions located in tetragonal BaTiO{sub 3} crystals.

36 MATERIALS SCIENCE↗

Mn doping effect on optical and ESR studies of Zn{sub 1-x}Mn{sub x}O compound sintered at different temperatures

Polycrystalline bulk samples of Zn{sub 1-x}Mn{sub x}O with x=0.02, 0.04, 0.05 and sintered at different temperatures (500 °C & 800 °C) were studied to investigate the doping effect on the structural, optical properties and spin dynamics in ZnO system. The crystallite size was seen to decrease with no significant change in other structural parameters. FTIR study showed a small effect on the Zn-O stretching bond and other bonds due to presence of Mn. Calculation from UV-Vis spectra showed increase in the optical band gap in the low temperature sintered samples due to Mn doping. In the PL spectra, the UV emission seen to dominate for the 500 °C sintered sample, for 800 °C sample the visible emission dominate indicating increase in non-radiative emission. ESR signals obtained from the microwave absorption shows ferromagnetic signal for the low temperature sintered sample only with a g value of 2.004 for the 2% Mn doped sample. The number of spin participation for resonance is calculated from the ESR signal, which supports the magnetic behaviour of this particular sample.

36 MATERIALS SCIENCE↗

Highly Enhanced Curie Temperature in Ga-Implanted Fe3GeTe2 van der Waals Material

Among many efforts in the research of van der Waals (vdW) magnetic materials, increasing the Curie temperature above room temperature has been at the center of research in developing spintronics technology using vdW materials. Here an effective and reliable method of increasing the Curie temperature of ferromagnetic Fe3GeTe2 vdW materials by Ga implantation is reported. It is found that implanting Ga into Fe3GeTe2 by the amount of 10-3 Ga Å-3 could greatly enhance the Fe3GeTe2 Curie temperature by almost 100%. Spatially resolved microdiffraction and element-resolved X-ray absorption spectroscopy show little changes in the Fe3GeTe2 crystal structure and Fe valence state. In addition, the Ga implantation changes the Fe3GeTe2 magnetization from out-of-plane direction at low temperature to in-plane direction at high temperature. The result opens a new opportunity for tailoring the magnetic properties of vdW materials beyond room temperature.

Yang, M↗

Wireless sensor

Disclosed is a sensor for detecting a target material. The sensor includes a ferromagnetic metal and a molecular recognition reagent coupled to the ferromagnetic metal. The molecular recognition reagent is operable to expand upon exposure to vapor or liquid from the target material such that the molecular recognition reagent changes a tensile stress upon the ferromagnetic metal. The target material is detected based on changes in the magnetic switching characteristics of the ferromagnetic metal caused by the changes in the tensile stress.

36 MATERIALS SCIENCE↗

Methods for the fabrication of thermally stable magnetic tunnel junctions

Magnetic tunnel junctions and method for making the magnetic tunnel junctions are provided. The magnetic tunnel junctions are characterized by a tunnel barrier oxide layer sandwiched between two ferromagnetic layers. The methods used to fabricate the magnetic tunnel junctions are capable of completely and selectively oxidizing a tunnel junction precursor material using an oxidizing gas containing a mixture of gases to provide a tunnel junction oxide without oxidizing the adjacent ferromagnetic materials. In some embodiments the gas mixture is a mixture of CO and CO.sub.2 or a mixture of H.sub.2 and H.sub.2O.

36 MATERIALS SCIENCE↗

Multiferroic oxide thin films and heterostructures

Multiferroic materials promise a tantalizing perspective of novel applications in next-generation electronic, memory, and energy harvesting technologies, and at the same time they also represent a grand scientific challenge on understanding complex solid state systems with strong correlations between multiple degrees of freedom. In this review, we highlight the opportunities and obstacles in growing multiferroic thin films with chemical and structural integrity and integrating them in functional devices. Besides the magnetoelectric effect, multiferroics exhibit excellent resistant switching and photovoltaic properties, and there are plenty opportunities for them to integrate with other ferromagnetic and superconducting materials. The challenges include, but not limited, defect-related leakage in thin films, weak magnetism, and poor control on interface coupling. Although our focuses are Bi-based perovskites and rare earth manganites, the insights are also applicable to other multiferroic materials. We will also review some examples of multiferroic applications in spintronics, memory, and photovoltaic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A magnetic topological semimetal Sr 1-y Mn 1-z Sb2 (y, z < 0.10)

Weyl (WSMs) evolve from Dirac semimetals in the presence of broken time-reversal symmetry (TRS) or space-inversion symmetry. The WSM phases in TaAs-class materials and photonic crystals are due to the loss of space-inversion symmetry. For TRS-breaking WSMs, despite numerous theoretical and experimental efforts, few examples have been reported. Here in this paper, we report a new type of magnetic semimetal Sr 1-y Mn 1-z Sb 2 (y, z < 0.1) with nearly massless relativistic fermion behaviour (m* = 0.04 - 0.05m 0 , where m 0 is the free-electron mass). This material exhibits a ferromagnetic order for 304 K < T < 565 K, but a canted antiferromagnetic order with a ferromagnetic component for T < 304 K. The combination of relativistic fermion behaviour and ferromagnetism in Sr 1-y Mn 1-z Sb2 offers a rare opportunity to investigate the interplay between relativistic fermions and spontaneous TRS breaking.

36 MATERIALS SCIENCE↗

Dichotomy of flat bands in the van der Waals ferromagnet Fe 5 ⁢GeTe 2

Quantum materials with bands of narrow bandwidth near the Fermi level represent a promising platform for exploring a diverse range of fascinating physical phenomena, as the high density of states within the small energy window often enables the emergence of many-body physics. On one hand, flat bands can arise from strong Coulomb interactions that localize atomic orbitals. On the other hand, quantum destructive interference can quench the electronic kinetic energy. Although both have a narrow bandwidth, the two types of flat bands should exhibit very distinct spectral properties arising from their distinctive origins. So far, the two types of flat bands have only been realized in very different material settings and chemical environments, preventing a direct comparison. Here, in this study, we report the observation of the two types of flat bands within the same material system—an above-room-temperature van der Waals ferromagnet, Fe 5−x GeTe 2 , distinguishable by a switchable iron site order. The contrasting nature of the flat bands is also identified by the remarkably distinctive temperature evolution of the spectral features, indicating that one arises from electron correlations in the Fe(1) site-disordered phase, while the other geometrical frustration in the Fe(1) site-ordered phase. Our results therefore provide a direct juxtaposition of the distinct formation mechanism of flat bands in quantum materials and an avenue for understanding the distinctive roles flat bands play in the presence of magnetism, topology, and lattice geometrical frustration, utilizing sublattice ordering as a key control parameter.

Wu, Han [Rice Univ., Houston, TX (United States)] ↗

Effect of current on magnetization oscillations in the ferromagnet-antiferromagnet junction

The effect of spin-polarized current on the steady-state magnetization and oscillations of antiferromagnet magnetization in a ferromagnetic-antiferromagnetic magnetic junction is analyzed. The macrospin approximation is generalized to describe antiferromagnets. The canted configuration of the antiferromagnet and the resultant magnetic moment are produced by the application of an external magnetic field. The resonance frequency, damping, and threshold current density corresponding to the emergence of instability are calculated. The possibility of generating weakly damped magnetization oscillations in the terahertz range is demonstrated. The effect of fluctuations on the canted configuration of the antiferromagnet is discussed.

36 MATERIALS SCIENCE↗

Synthesis, characterization and magnetic performance of Co-incorporated ordered mesoporous carbons

Highlights: Black-Right-Pointing-Pointer A facile one-pot aqueous self-assembly strategy for the synthesis Co-incorporated ordered mesoporous carbons (Co-OMCs). Black-Right-Pointing-Pointer Co-OMCs exhibit typical ferromagnetic characteristics. Black-Right-Pointing-Pointer Saturation magnetization strength can be easily adjusted by changing the content of cobalt. Black-Right-Pointing-Pointer Carbonization temperatures have significant effects on the structure and magnetic properties of Co-OMCs. -- Abstract: Co-incorporated ordered mesoporous carbon (Co-OMC) with magnetic frameworks has been synthesized via a one-pot self-assembly strategy. The effects of cobalt loading on carbon matrix, adsorption properties and magnetic properties of the resultant mesostructured cobalt/carbon composites were investigated by nitrogen sorption, X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and magnetometer measurements. The results show that the mesoporous composites with a high cobalt content (such as 18.0 wt%) possess an ordered and uniform mesoporous structure (5.3 nm), high surface areas (up to 687 m{sup 2}/g) and high pore volumes (up to 0.54 cm{sup 3}/g). Cobalt nanoparticles of size 4-9 nm are confined inside the mesopores or walls of the mesoporous carbon. These materials exhibit typical ferromagnetic characteristics. The saturation magnetization strength can be easily adjusted by changing the content of cobalt. The carbonization temperatures have significant effects on the structure and magnetic properties of Co-OMC also.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗