Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Exchange interaction mechanisms in 1,3,5,7-tetramethyl-2,6-diazaadamantane N,N’-dioxyl biradical

The exchange interaction parameters were calculated and the spin density distribution over the organic skeleton of the 1,3,5,7-tetramethyl-2,6-diazaadamantane N,N’-dioxyl biradical was studied based on the results of quantum chemical modeling of the biradical structure by the DFT method using various hybrid functionals (UB3LYP, LC-wPBE, UCAM-B3LYP, UHSEH1PBE) with the 6-311++G(2d,2p) basis set and by the UHF method with the same basis set. The characteristics of the direct orbital overlap between the N atoms of the two nitroxide groups were determined. The values of the J constant, obtained using different calculation methods, were found to be similar to each other. It was established that there is ferromagnetic exchange interaction between the radical sites in the system in question, which occurs predominantly according to the spin polarization mechanism in the 2,6-diazaadamantane core, and the various spin density transfer pathways through the C atoms of the organic skeleton were found to be nonequivalent. The direct overlap of the upper singly-occupied МОs with localization on the nitroxide groups led to a noticeable additional contribution of the antiferromagnetic exchange interaction. Despite the latter factor, the total contribution of these two mechanisms (spin polarization and direct through-space exchange) resulted in the triplet ground state in the biradical studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bed form-induced hyporheic exchange and geochemical hotspots

Small-scale bed form topographies control hyporheic exchange and biogeochemical processes within aquatic sediments, which ultimately affect water quality and nutrient cycling at the watershed scale. The impact of three-dimensional and small-scale bed form topographies on hyporheic exchange and solute mixing is investigated in the present work. The effect of bed form morphologies on the development of zones of enhanced reaction rates (i.e., hotspots) is also studied. A computational fluid dynamics model to simulate river flow over bed forms is combined with a subsurface flow and multicomponent reactive solute transport model. A wide variety of bed form topographies are generated using geometric models by varying parameters controlling curvature as well as bed form wavelength and amplitude. The results in this research suggest that out-of-phase bed forms generate more complex hyporheic flow patterns which reduce the efficiency of solute transformations. Higher phase shifts in bed form shapes result in overall higher average velocity, larger zones of enhanced pressure and reaction rates, and higher amounts of solute exchange. Moreover, the bed form shapes control the reaction process for a wide range of sediment conductivities. Here this study advances the understanding of the effects of complex and small scale morphological features on hyporheic exchange processes including the rate and spatio-temporal distribution of reaction hotspots.

54 ENVIRONMENTAL SCIENCES↗

Elucidating the roles of metallic Ni and oxygen vacancies in CO 2 hydrogenation over Ni/CeO 2 using isotope exchange and in situ measurements

Improvement in processes to convert CO 2 to value-added chemicals requires elucidation of catalytic mechanisms. Previous investigations of CO 2 reduction by hydrogen over CeO2-supported Ni catalysts suggested that the selectivity to CO and CH 4 was related to the Ni loading. In this work we utilized near ambient pressure X-ray photoelectron spectroscopy to confirm that Ni remained metallic under reaction conditions at different Ni loadings. The presence of partially reduced CeO 2 was detected, suggesting that oxygen from CO 2 did not re-oxidize the CeO x . Isotope exchange studies were performed using C 18 O 2 in a batch reactor equipped with Fourier transform infrared spectroscopy and mass spectrometry to determine the involvement of surface and lattice oxygen. Our results demonstrate that oxygen exchange with the CeO 2 support occurs beyond the surface layer under CO 2 hydrogenation conditions. Kinetic studies also revealed that the oxygen exchange rate is fast with respect to the CO 2 hydrogenation reaction rate and that the CeO 2 oxygen exchange mechanism is modified by Ni.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical modeling of a 2K J-T heat exchanger used in Fermilab Vertical Test Stand VTS-1

Fermilab Vertical Test Stand-1 (VTS-1) is in operation since 2007 for testing the superconducting RF cavities at 2 K. This test stand has single layer coiled finned tubes heat exchanger before J-T valve. A finite difference based thermal model has been developed in Engineering Equation Solver (EES) to study its thermal performance during filling and refilling to maintain the constant liquid level of test stand. The model is also useful to predict its performance under other various operating conditions and will be useful to design the similar kind of heat exchanger for future needs. Present paper discusses the different operational modes of this heat exchanger and its thermal characteristics under these operational modes. Results of this model have also been compared with the experimental data gathered from the VTS-1 heat exchanger and they are in good agreement with the present model.

2 Kelvin J-T Heat Exchanger↗

Study of junction flows in louvered fin round tube heat exchangers using the dye injection technique

Detailed studies of junction flows in heat exchangers with an interrupted fin design are rare. However, understanding these flow structures is important for design and optimization purposes, because the thermal hydraulic performance of heat exchangers is strongly related to the flow behaviour. In this study flow visualization experiments were performed in six scaled-up models of a louvered fin round tube heat exchanger. The models have three tube rows in a staggered layout and differ only in their fin spacing and louver angle. A water tunnel was designed and built and the flow visualizations were carried out using dye injection. At low Reynolds numbers the streakline follows the tube contours, while at higher Reynolds numbers a horseshoe vortex is developed ahead of the tubes. The two resulting streamwise vortex legs are destroyed by the downstream louvers (i.e. downstream the turnaround louver), especially at higher Reynolds numbers, smaller fin pitches and larger louver angles. Increasing the fin spacing results in a larger and stronger horseshoe vortex. This illustrates that a reduction of the fin spacing results in a dissipation of vortical motion by mechanical blockage and skin friction. Furthermore it was observed that the vortex strength and number of vortices in the second tube row is larger than in the first tube row. This is due to the thicker boundary layer in the second tube row, and the flow deflection, which is typical for louvered fin heat exchangers. Visualizations at the tube-louver junction showed that in the transition part between the angled louver and the flat landing a vortex is present underneath the louver surface which propagates towards the angled louver. (author)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

OXYGEN ISOTOPIC COMPOSITIONS OF THE ALLENDE TYPE C CAIs: EVIDENCE FOR ISOTOPIC EXCHANGE DURING NEBULAR MELTING AND ASTEROIDAL THERMAL METAMORPHISM

Based on the mineralogy and petrography, coarse-grained, igneous, anorthite-rich (Type C) calcium-aluminum-rich inclusions (CAIs) in the CV3 carbonaceous chondrite Allende have been recently divided into three groups: (i) CAIs with melilite and Al,Ti-diopside of massive and lacy textures (coarse grains with numerous rounded inclusions of anorthite) in a fine-grained anorthite groundmass (6-1-72, 100, 160), (ii) CAI CG5 with massive melilite, Al,Ti-diopside and anorthite, and (iii) CAIs associated with chondrule material: either containing chondrule fragments in their peripheries (ABC, TS26) or surrounded by chondrule-like, igneous rims (93) (Krot et al., 2007a,b). Here, we report in situ oxygen isotopic measurements of primary (melilite, spinel, Al,Ti-diopside, anorthite) and secondary (grossular, monticellite, forsterite) minerals in these CAIs. Spinel ({Delta}{sup 17}O = -25{per_thousand} to -20{per_thousand}), massive and lacy Al,Ti-diopside ({Delta}{sup 17}O = -20{per_thousand} to -5{per_thousand}) and fine-grained anorthite ({Delta}{sup 17}O = -15{per_thousand} to -2{per_thousand}) in 100, 160 and 6-1-72 are {sup 16}O-enriched relative spinel and coarse-grained Al,Ti-diopside and anorthite in ABC, 93 and TS26 ({Delta}{sup 17}O ranges from -20{per_thousand} to -15{per_thousand}, from -15{per_thousand} to -5{per_thousand}, and from -5{per_thousand} to 0{per_thousand}, respectively). In 6-1-72, massive and lacy Al,Ti-diopside grains are {sup 16}O-depleted ({Delta}{sup 17}O {approx} -13{per_thousand}) relative to spinel ({Delta}{sup 17}O = -23{per_thousand}). Melilite is the most {sup 16}O-depleted mineral in all Allende Type C CAIs. In CAI 100, melilite and secondary grossular, monticellite and forsterite (minerals replacing melilite) are similarly {sup 16}O-depleted, whereas grossular in CAI 160 is {sup 16}O-enriched ({Delta}{sup 17}O = -10{per_thousand} to -6{per_thousand}) relative to melilite ({Delta}{sup 17}O = -5{per_thousand} to -3{per_thousand}). We infer that CAIs 100, 160 and CG5 experienced melting in an {sup 16}O-rich ({Delta}{sup 17}O < -20{per_thousand}) nebular gas in the CAI-forming region. The Type C and Type-B-like portions of CAI 6-1-72 experienced melting in an {sup 16}O-depleted ({Delta}{sup 17}O {ge} -13{per_thousand}) nebular gas. CAIs ABC, TS26 and 93 experienced isotopic exchange during re-melting in the presence of an {sup 16}O-poor ({Delta}{sup 17}O {ge} -10{per_thousand}) nebular gas in the chondrule-forming region(s). Subsequently, Allende Type C CAIs experienced post-crystallization isotopic exchange with an {sup 16}O-poor reservoir that affected largely melilite and anorthite. Because pseudomorphic replacement of lacy melilite by grossular, monticellite and forsterite occurred during thermal metamorphism, some oxygen isotopic exchange of melilite and anorthite must have continued after formation of these secondary minerals. We suggest that some or all oxygen isotopic exchange in melilite and anorthite occurred during fluid-assisted thermal metamorphism on the CV parent asteroid. Similar processes may have also affected melilite and anorthite of CAIs in metamorphosed CO chondrites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperation between bound waters and hydroxyls in controlling isotope-exchange rates

Exposed and bound waters on minerals differ from aqueous ions in that they are often structurally separated from one another rather than being close packed as in octahedral aquo ions [e.g., Al(H 2 O) 6 3+ ]. Thus, the bulk of the literature on rates of ligand substitution in aqueous ions may be a poor guide to the reactions of geochemical interest. To understand how separation of the reactive functional groups affects the rates of simple water exchange reactions, we synthesized two similar Rh(III) complexes, [Rh(phen) 2 H 2 O) 2 ] 3+ [1] and [Rh(phen) 2 (H 2 O)Cl] 2+ [2] (phen=1,10-phenanthroline) that differ in the number and proximity of bound waters. The complex [1] has two adjacent water molecules and [2] has a single water adjacent to a bound chloride ion. We employed Rh(III) as a trivalent metal rather than a more geochemically relevant metal like Fe(III) or Al(III) to slow the rate of reaction and dissociation of the molecules, which makes for simple measurement of the rates of isotopic substitution by mass spectrometry of the ions themselves as a function of time. We prepared isotopically unique versions of the molecules dissolved them in isotopically dissimilar solvent and measured the rates of exchange from the extents of 18 O and 16 O exchange at the bound waters. The rates differ enormously depending upon the protonation state of adjacent functional groups. Values of k298 when the molecules are nearly fully protonated are $k$$^{298}_{0}$ = 5·10 -8 s -1 for [1] and $k$$^{298}_{0}$ = 7.3·10 -9 for [2]. Enthalpy and entropy activation parameters (ΔH ‡ and ΔS ‡ ) were measured to be 121.1± 3 kJ mol -1 , and 22±10 J mol -1 K -1 , respectively for [1]. The corresponding parameters for the mono-aquo complex, [2], are 134.6± 3 kJ mol -1 and 50±5 J mol -1 K -1 . These compare well to other metals and nanometer-size clusters. Here, rates increase by many orders of magnitude upon deprotonation of one of the bound waters, but in a way that can be understood for geochemical systems at oxides. Key is the close proximity of a transferable proton that can convert the bound hydroxyl to a bound water and accelerate exchange for a bulk water. Thus, structural information about the location of bound waters relative to one another is a key piece of information to reconstruct rates of reactions at oxides surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isotope exchange of ND 3 on Pt catalyst-loaded 13X molecular sieve

During D-T fusion operations the capture, purification, and recycling of unburned tritium will be crucial, as the formation of tritium containing molecules require additional processing. Here, removing the tritium can require costly processing to be unbound from the tritium-containing molecules and improvements to these processes will be necessary moving forward. Existing techniques using sorbent material beds to remove tritium-containing molecules from process gas streams undergo repeated high-heat cycling which leads to diminished bed lifespans, necessitating replacement and associated downtime. This work demonstrates the capture and isotopic exchange technique of deuterated ammonia (ND3), used as a surrogate for tritium, at ambient temperature using a Pt catalyst-loaded 13X molecular sieve. Unmodified 13X molecular sieve is capable of adsorbing and retaining the ND3 however, incorporation of a catalyst facilitates the isotopic exchange of the hydrogen isotopes. The effluent gas streams were analyzed in conjunction with desorbed ammonia isotopologues post-exchange to verify these results. Isotopically exchanging and removing heavier hydrogen isotopes using this technique provides an alternative to traditional removal methods.

08 HYDROGEN↗

Ammonium-coordinated exchanger (ACE) functionalized silica sorbents for recovering/removing aqueous anionic contaminants

There are limited studies of functionalized silica anion exchange sorbents used for critical/heavy metal recovery/removal relative to polymeric and other inorganic materials. This work features ammonium-coordinated exchanger (ACE) anion exchange particle sorbents prepared by either acid-washing epoxy-crosslinked polyethylenimine (PEI) hydrogen bonded within/to a silica particle sorbent (two-step method) or reacting a di-chlorinated crosslinker, α,α-dichloro-p-xylene (DPX), with PEI within silica (single-step method). Energy dispersive X-ray spectroscopy (EDS) and infrared spectroscopy confirmed the presence of -NH 2 + ···Cl - and -NH 3 + ···Cl - groups, which removed oxyanionic species –arsenate, selenate, chromate, sulfate, phosphate, and nitrate– plus bromide from ideal solutions, authentic acid mine drainage (AMD), and authentic flue gas desulfurization (FGD) wastewater. Affinity of the anions for ACE varied across single- and mixed-element solutions. However, affinity for CrO 4 2- was among the highest in both cases. Total anion uptake by the optimized ACE, PEI-E3-HCl_1.1, reached 1.2 mmol anion/g-sorb. (0.56 mmol CrO 4 2- /g), or ∼2.3 mmol negative charge/g-sorb. This was close to the 0.52 mmol CrO 4 2- /g of a commercial anion exchange resin. Near-consistent removal of 20–80 % of each anion from FGD during an eight-cycle adsorption-desorption (1 M NaCl) test predicted good ACE viability for testing under practical conditions at larger scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antiferromagnet thickness dependence and rotatable spins in exchange biased CoO/Fe films

The emergence of exchange bias and coercivity enhancement has been investigated in epitaxial CoO/Fe films with varied antiferromagnet (AF) thicknesses, even smaller than the critical value where the frozen CoO spins are detectable. Vector magnetometry and first-order reversal curve (FORC) measurements reveal different CoO thickness dependence of the exchange bias and coercivity enhancement, including the evolution of magnetization reversal from a high coercivity, low bias phase due to rotatable CoO moments to a high bias, low coercivity phase due to frozen CoO moments. Furthermore, the AF domain state is found to be metastable, which can be reoriented by external and exchange fields prior to the appearance of frozen spins, pointing to a generic origin of the training effect. Monte Carlo simulations show that the AF anisotropy energy barrier and the rotatable spins induced by magnetic field and exchange interaction at the interface are responsible for the observed effects.

36 MATERIALS SCIENCE↗

Enhanced surface exchange activity and electrode performance of (La 2–2x Sr 2x )(Ni 1–x Mn x )O 4+δ cathode for intermediate temperature solid oxide fuel cells

Surface exchange kinetics of Ruddlesden-Popper (R-P) phase lanthanum nickelates upon Mn doping as an intermediate temperature solid oxide fuel cells (IT-SOFCs) cathode is investigated for the first time in this communication. To promote the exchange rate in oxygen reduction reaction (ORR) on nickelates, Mn is partially substituted for Ni. The oxygen exchange resistance is accurately measured by electrochemical impedance spectroscopy (EIS) with dense thin layer cathode. It is found that Mn substantially promotes the surface kinetics; a surface exchange coefficient (k) of 1.57 × 10 –6 cm/s is obtained at 700 °C for La 1.8 Sr 0.2 Ni 0.9 Mn 0.1 O 4+δ (Sr20Mn10), ~80% higher than that of the undoped La 2 NiO 4+δ (LNO). To our best knowledge, such coefficient is the highest values among the currently available R-P phase IT-SOFC cathodes. The corresponding polarization resistances (R p ) are evaluated on porous electrodes. R p for LNO is 0.74 Ωcm 2 at 750 °C, but decreases significantly to 0.42 Ωcm 2 for Sr20Mn10 which is remarkably improved compared to the reported values in the literature for La 2 MO 4+δ materials (M = transition metal). In conclusion, those promising results demonstrate that Mn-doped LNO is a new excellent cathode material for IT-SOFC.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Exchange interaction at the interface of Fe-NiO nanocomposites

Fe-NiO nanocomposites with Fe to NiO ratio 20:80, 30:70 and 50:50 were prepared by a chemical route. X-ray diffraction and TEM measurements showed the presence of {alpha}-Fe and NiO phases in the prepared nanocomposites having an average crystallite size 17 nm. HRTEM image showed a structurally disordered phase at the Fe-NiO interface. Moessbauer spectra of the nanocomposites consist of a doublet along with a sextet corresponding to relaxed and blocked {alpha}-Fe phases, respectively. The dc magnetization measurements in field-cooled condition show a shift of hysteresis loop and an enhancement of coercive field at low temperature confirming the presence of exchange bias at Fe-NiO interfaces. The irreversibility observed in the FC and ZFC magnetization measurements also points to exchange bias effect. -- Graphical abstract: Fe-NiO nanocomposites exhibited some structural disordered region at the interface as revealed by HRTEM. A prominent shift in the hysteresis loops in field cooled condition confirmed the presence of exchange bias at Fe-NiO interfaces. The irreversibility observed in M-T measurements also points to exchange bias effect. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Exchange interactions and the state of iron atoms in Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ}

On the basis of the results of magnetic susceptibility and ESR studies of the Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ} solid solutions iron atoms in the solid solutions of cubic modification of bismuth niobate were found to exist as Fe(III) monomers and exchange bound Fe(III)-O-Fe(III) dimers with antiferro- and ferromagnetic type of superexchange. The exchange parameters and the distribution of monomers and dimers in the solid solutions were calculated as a function of paramagnetic atom content. - Graphical abstract: The study of the Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ} solid solutions showed that the introduction of iron atoms into the structure of Bi{sub 3}NbO{sub 7} stabilizes the cubic structure of bismuth niobate making the phase transition tetragonal ↔ cubic structure irreversible. In the Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ} solid solutions we observe the formation of dimers with antiferro- and ferromagnetic exchange. Such clusters are partially retained even at the infinite dilution of the solid solution, which testifies for their rigidity. A sufficiently high parameter of ferromagnetic exchange in a dimer (+53 cm{sup −1}) seems to result from iron atoms being located in the vicinity of oxygen vacancy. - Highlights: • The reversible transition cubic – tetragonal modifications in Bi{sub 3}NbO{sub 7} becomes irreversible. • Only cubic modification of Bi{sub 3}Nb{sub 1-x}Fe{sub x}O{sub 7-δ} is stable due to clusters of Fe atoms. • These clusters are sufficiently strong and retained even at the infinite dilution. • The calculations of magnetic susceptibility give the distribution of the clusters and single atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion exchange and electrochemical evaluation of the microporous phosphate Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}

A new lithium iron(III) phosphate, Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}, has been synthesized and is currently under electrochemical evaluation as an anode material for rechargeable lithium-ion battery applications. The sample was prepared via the ion exchange reaction of Cs{sub 5}K{sub 4}Fe{sub 7}(PO{sub 4}){sub 10}1 in the 1 M LiNO{sub 3} solution under hydrothermal conditions at 200 deg. C. The fully Li{sup +}-exchanged sample Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}2 cannot yet be synthesized by conventional high-temperature, solid-state methods. The parent compound 1 is a member of the Cs{sub 9-x}K{sub x}Fe{sub 7}(PO{sub 4}){sub 10} series that was previously isolated from a high-temperature (750 deg. C) reaction employing the eutectic CsCl/KCl molten salt. The polycrystalline solid 1 was first prepared in a stoichiometric reaction via conventional solid-state method then followed by ion exchange giving rise to 2. Both compounds adopt three-dimensional structures that consist of orthogonally interconnected channels where electropositive ions reside. It has been demonstrated that the Cs{sub 9-x}K{sub x}Fe{sub 7}(PO{sub 4}){sub 10} series possesses versatile ion exchange capabilities with all the monovalent alkali metal and silver cations due to its facile pathways for ion transport. 1 and 2 were subject to electrochemical analysis and preliminary results suggest that the latter can be considered as an anode material. Electrochemical results indicate that Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10} is reduced below 1 V (vs. Li) to most likely form a Fe(0)/Li{sub 3}PO{sub 4} composite material, which can subsequently be cycled reversibly at relatively low potential. An initial capacity of 250 mAh/g was measured, which is equivalent to the insertion of thirteen Li atoms per Li{sub 9+x}Fe{sub 7}(PO{sub 4}){sub 10} (x = 13) during the charge/discharge process (Fe{sup 2+} + 2e {yields} Fe{sup 0}). Furthermore, 2 shows a lower reduction potential (0.9 V), by approximately 200 mV, and much better electrochemical reversibility than iron(III) phosphate, FePO{sub 4}, highlighting the value of improving the ionic conductivity of the sample.

36 MATERIALS SCIENCE↗

Electro-osmo-dialysis through nanoporous layers physically conjugated to micro-perforated ion-exchange membranes: Highly selective accumulation of trace coions

This study explores theoretically and numerically the phenomenon of counter-flow accumulation of trace coions during electro-osmo-dialysis through composite membranes containing nanoporous and perforated ion-exchange layers. The combination of charged nanopores and perforations allows electroosmosis, and ion concentration polarization appears near the ion-exchange layer. Accumulation of trace coions occurs because their advective and electromigration flow velocity components have opposite signs and are locally compensating in depletion regions where electric fields are high. This local compensation of flow components can give rise to high accumulation factors (>1000 in some cases) for trace coions at some distance from the interface between the nanoporous and ion-exchange layers. Moreover, the extent of this accumulation depends on the trace-coion diffusion coefficient. The resulting selectivity between different coions might serve as a basis for environmentally friendly separation of ionic species such as synthetic peptides or rare-earth elements. For example, a periodic process might include accumulation followed by species release into smaller volumes of solution. For both rare-earth ions and peptide-like species, the accumulation selectivity between ions with small differences in mobilities depends on system parameters such as nanoporous-layer thickness, distance between the perforations, and the zeta potential of the nanopore surface. Here, the use of optimal values of these membrane parameters may enable tuning of the electro-osmo-dialysis system for separation of specific ions. Modelling reveals that despite inhomogeneous patterns of fluid and ion flows close to the nanoporous/perforated ion-exchange interface, at relatively short distances from this interface (less than half the distance between the perforations) all the flows become practically one-dimensional (1D). Similarly, the concentration profiles of trace coions also become 1D. The flow one-dimensionality at short distances from the current-polarized interface enables a simple 1D approximation that is useful for an approximate analysis of trends in this multi-parameter system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial interactions between polymers and selective adsorbents influence ion transport properties of boron scavenging ion-exchange membranes

The recent emergence of adsorptive ion-exchange membranes (IEMs), designed by the synergistic integration of highly selective porous aromatic frameworks (PAFs) with ion-exchange polymers, has enabled simultaneous desalination and targeted removal of specific solutes (e.g., mercury, iron, boron, etc.). While the addition of highly selective PAFs to IEMs yields membranes with entirely new functions, PAF-polymer interactions, and the effects of such interactions on ion transport properties of the membranes, are not well understood. In this study, we developed cross-linked adsorptive cation- and anion-exchange membranes (CEMs and AEMs) for simultaneous desalination and boron removal via in-situ formation of the cross-linked polymer network around the boron selective PAF particles. Here we systematically investigated the influence of PAF loading level on PAF-polymer interactions as well as the equilibrium and transport properties of the adsorptive IEMs. The interactions between the PAF and the ion-exchange polymer matrix differed for the CEMs and AEMs due to differences in the fixed charge group chemistry. Notably, the sulfonate groups of the CEMs can form hydrogen bonds with the hydroxyl groups of the PAF, while the quaternary ammonium groups in the AEMs cannot. These differences in interfacial interactions did not significantly impact counter-ion transport across the adsorptive IEMs but had a significant influence on co-ion transport, which affected the counter-ion/co-ion selectivity of the membranes. The selectivity of the adsorptive CEMs decreased while that of the adsorptive AEMs increased with PAF loading level. The results of this study underscore the importance of controlling interfacial interactions when designing adsorptive IEMs for simultaneous water desalination and solute capture and recovery.

36 MATERIALS SCIENCE↗

Prediction of dynamic behavior of a system undergoing an exchange of components using a transmission simulator method

In systems with modular design, it is of interest to perform component exchanges to upgrade components and explore new system configurations. If the dynamics of the components are known, then dynamic substructuring can be used to obtain a prediction of system performance for the new configuration. The transmission simulator method is a substructuring technique that utilizes an additional fixture to apply an elastic boundary condition to a test article such that an appropriate dynamic response can be obtained for a given substructuring application, and the technique has been used widely for performing coupling and decoupling operations. Here, in this work, a modified transmission simulator method is proposed that allows a direct exchange of components to be performed. In a numerical demonstration, the proposed method is shown to accurately predict the dynamics of an assembly that has undergone a component exchange in which the exchanged components have different material properties and different geometric properties. This approach can be applied to dynamic qualification frameworks in which structures undergo modifications or upgrades rather than complete redesigns.

Component exchange↗

Hydration structure and energetics of iron-exchanged montmorillonite

The interaction between iron released from corroded steel canisters and bentonite is a key process influencing the long-term performance of nuclear waste repositories. In particular, the migration of Fe²⁺ into montmorillonite (Mnt) interlayers may alter its hydration, swelling, and ion-transport properties. In the present study, molecular dynamics simulations were performed to investigate the hydration behavior, structural response, and transport properties of Fe-exchanged montmorillonite (Fe-Mnt) under varying hydration states. The simulations focus on short- to intermediate-time-scale Fe 2+ and Fe 3+ interlayer exchange and hydration effects, and do not consider long-term structural substitution, Fe-bearing clay phase stabilization, or secondary iron mineral precipitation. Systems containing Na + -, Fe 2+ -, and Fe 3+ -Mnt were examined using both periodic and edge-exposed configurations to evaluate interlayer structure, ion exchange, and free energy of Fe intercalation. The results show that Fe ions influence the interlayer spacing primarily at low water contents (<1 bilayer), where Fe-Mnt exhibits a d-spacing 1–2 Å larger than Na-Mnt due to stronger hydration. The calculated hydration energies follow the order Fe 2+ $<$Fe 3+ $<$Na + . Both water and ion diffusion coefficients decrease upon Fe ion intercalation, with Fe 2+ ions diffusing an order of magnitude more slowly than those of Na + . Free energy profiles further confirm that Fe 2+ and Fe 3+ ions are thermodynamically favored in the interlayer, with Fe 3+ being the most stable. In conclusion, these findings provide molecular-scale insights into the mechanisms of Fe–Na exchange and their implications for bentonite alteration in repository environments.

clay↗