SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Density, electric field and volt-ampere characteristics for spherical electrostatic Langmuir probe in collision plasma with weak ionization and recombination, using asymptotic method
Density, electric field and volt-ampere for characteristics spherical electrostatic Langmuir probe in collision plasma with weak ionization and recombination, using asymptotic method
The intense magnetic storm on 17-18 March 2015 caused large disturbances of the ionosphere. Based on the plasma density (Ni) observations performed by the Swarm fleet of satellites, the Gravity Recovery and Climate Experiment mission, and the Communications/Navigation Outage Forecasting System satellite, we characterize the storm-related perturbations at low latitudes. All these satellites sampled the ionosphere in morning and evening time sectors where large modifications occurred. Modifications of plasma density are closely related to changes of the solar wind merging electric field (E (sub m)). We consider two mechanisms, prompt penetration electric field (PPEF) and disturbance dynamo electric field (DDEF), as the main cause for the Ni redistribution, but effects of meridional wind are also taken into account. At the start of the storm main phase, the PPEF is enhancing plasma density on the dayside and reducing it on the nightside. Later, DDEF takes over and causes the opposite reaction. Unexpectedly, there appears during the recovery phase a strong density enhancement in the morning/pre-noon sector and a severe Ni reduction in the afternoon/evening sector, and we suggest a combined effect of vertical plasma drift, and meridional wind is responsible for these ionospheric storm effects. Different from earlier studies about this storm, we also investigate the influence of storm dynamics on the initiation of equatorial plasma irregularities (EPIs). Shortly after the start of the storm main phase, EPIs appear in the post-sunset sector. As a response to a short-lived decline of E (sub m), EPI activity appears in the early morning sector. Following the second start of the main phase, EPIs are generated for a few hours in the late evening sector. However, for the rest of the storm main phase, no more EPIs are initiated for more than 12 hours. Only after the onset of recovery phase does EPI activity start again in the post-midnight sector, lasting more than 7 hours.This comprehensive view of ionospheric storm effects and plasma irregularities adds to our understanding of conditions that lead to ionospheric instabilities.
Antiferroelectric materials, where the transition between antipolar and polar phase is controlled by external electric fields, offer exceptional energy storage capacity with high efficiencies, giant electrocaloric effect, and superb electromechanical response. PbZrO 3 is the first discovered and the archetypal antiferroelectric material. Nonetheless, substantial challenges in processing phase pure PbZrO 3 have limited studies of the undoped composition, hindering understanding of the phase transitions in this material or unraveling the controversial origins of a low-field ferroelectric phase observed in lead zirconate thin films. Here, leveraging highly oriented PbZrO 3 thin films, a room-temperature ferrielectric phase is observed in the absence of external electric fields, with modulations of amplitude and direction of the spontaneous polarization and large anisotropy for critical electric fields required for phase transition. The ferrielectric state observations are qualitatively consistent with theoretical predictions, and correlate with very high dielectric tunability, and ultrahigh strains (up to 1.1%). This work suggests a need for re-evaluation of the fundamental science of antiferroelectricity in this archetypal material.
In this paper, we characterize the logarithmic singularities arising in the method of moments from the Green’s function in integrals over the test domain, and we use two approaches for designing geometrically symmetric quadrature rules to integrate these singular integrands. These rules exhibit better convergence properties than quadrature rules for polynomials and, in general, lead to better accuracy with a lower number of quadrature points. In this work, we demonstrate their effectiveness for several examples encountered in both the scalar and vector potentials of the electric-field integral equation (singular, near-singular, and far interactions) as compared to the commonly employed polynomial scheme and the double Ma–Rokhlin–Wandzura (DMRW) rules, whose sample points are located asymmetrically within triangles.
Here, to describe the charge-polarization coupling in the nanostructure formed by a thin Hf x Zr 1-x O 2 film with a single-layer graphene as a top electrode, we develop the “effective” Landau-Ginzburg-Devonshire model. This approach is based on the parametrization of the Landau expansion coefficients for the polar (FE) and antipolar (AFE) orderings in thin Hf 1-x Zr x O 2 films from a limited number of polarization-field curves and hysteresis loops. The Landau expansion coefficients are nonlinearly dependent on the film thickness h and Zr/[Hf+Zr] ratio x, in contrast to h-independent and linearly x-dependent expansion coefficients of a classical Landau energy. We explain the dependence of the Landau expansion coefficients by the strong nonmonotonic dependence of the Hf 1-x Zr x O 2 film polar properties on the film thickness, grain size and surface energy. The proposed Landau free energy with five “effective” expansion coefficients, which are interpolation functions of x and h, describes the continuous transformation of polarization dependences on applied electric field and hysteresis loop shapes induced by the changes of x and h in the range 0 < x < 1 and 5 nm < h < 35 nm. Using the effective free energy, we demonstrated that the polarization of Hf 1-x Zr x O 2 film influences strongly on the graphene conductivity, and the full correlation between the distribution of polarization and charge carriers in graphene is revealed. In accordance with our modeling, the polarization of the (5 – 25) nm thick Hf 1-x Zr x O 2 films, which are in the ferroelectric-like or antiferroelectric-like states for the chemical compositions 0.35 ≤ x ≤ 0.95, determine the concentration of carriers in graphene and can control its field dependence. The result can be promising for creation of next generation Si-compatible nonvolatile memories and graphene-ferroelectric FETs, because the working voltages applied to the Hf 1-x Zr x O 2 film (which acts as a gate) can be relatively low (less than 2 V). These low voltages are sufficient to induce the pronounced hysteresis of ferroelectric polarization in the Hf 1-x Zr x O 2 gate, which, due to the strong electric coupling, induces the hysteresis of the graphene charge.
Not provided.
It has been ten years since research on lead halide perovskites (LHPs) took off spectacularly and expanded into one of the most active fields today in chemistry, physics, materials science, and engineering. There is no doubt that the rapid growth of this field has been fueled by the exceptional performance of this class of materials in solar cells, light emitting devices, and other electronic, optoelectronic, and photonic devices. Such application oriented advance has been accompanied by major development in mechanistic understanding. Growing mechanistic studies on LHPs have revealed structure–property relationships including, among others, structural instability, unique defect chemistry, dynamic disorder and anharmonicity of phonons, local symmetry breaking, efficient screening of charge carriers in large polaron formation, and the Rashba effect due to spin–orbital coupling and the presence of local electric fields. This special issue collects the cutting edge of our understanding of why LHPs work and what lessons LHPs have taught us about structure and dynamics, in general.
The Electron Electrostatic Analyzer (EEA) is part of the HERMES instrument suite on Lunar Gateway and is designed to measure electrons in the energy range from 1 eV to 18 keV. Electrons in this range can be deflected or blocked from entering a detector by electric fields from a charged spacecraft platform, so many heliophysics missions (MMS, Cluster, etc.) use active potential control to minimize stray electric fields which would corrupt low-energy plasma measurements. Gateway, however, does not have such capabilities so the surface charging effects will influence the electron data. Further, some elements of Gateway partially block the instrument’s field of view to space. The effects of the Gateway platform on the low-energy electron population must be understood to maximize the accuracy of the EEA data. To investigate the electrostatic environment near Gateway and its effects on the EEA measurements, we use Nascap-2K to model the expected charging of Gateway under representative solar wind, magnetosheathic, and magnetospheric conditions. Next, we use the potential and electric field outputs from Nascap-2K along with in-house particle tracing codes to investigate how low-energy electrons are perturbed, blocked, or deflected by the spacecraft. We discuss how these perturbations impact the plasma moments computed from the EEA data and possible approaches for correcting the charging effects including application of advanced methods such as neural networks. In addition to electrons from the space environment being influenced by the electrostatic environment around Gateway, photoelectrons generated on Gateway surfaces will also be measured by EEA. We are investigating how knowledge of the potentials of various Gateway surfaces can be extracted from these measured photoelectrons using advanced numerical modeling and analysis. Such information would be valuable for validating charging models and planning mission operations around the platform. Finally, we discuss how the specific workflow developed for Gateway can be extended to a generalized process that is applicable to other future missions. As the space industry prepares for human exploration beyond low-Earth orbit, the need to obtain accurate space weather data from rideshare science payloads is critical. Our process for removing platform effects from the science data serves as a pathfinder for leveraging advanced simulations to maximize science returns and ensure the safety and success of future crewed missions.
During its orbit about the earth, the moon is located in the interplanetary medium or in the geomagnetosheath-geomagnetotail formed by the solar wind interaction with earth. In the tail, no evidence is found for a lunar magnetic field. In the interplanetary medium, no evidence exists for a bow shock or a trailing shock, although a well defined plasma wake region is observed in the anti-solar wind direction. The moon absorbs the solar wind plasma that strikes its surface and creates a void region or cavity in the flow. The observed lunar Mach cone gives evidence for the anisotropic propagation of waves in the magnetized collisionless warm plasma of the solar wind. The transmission of microstructural discontinuities in the interplanetary medium past the moon shows little distortion, indicating a low effective electrical conductivity of the lunar body. Fluctuations of the interplanetary magnetic field upstream from the plasma wake are stimulated by the disturbed conditions in that region. The moon behaves like a cold, nonmagnetic, fully absorbing dielectric sphere in the solar wind flow.
MoS 2 is a two-dimensional material with a band gap depending on the number of layers and tunable by an external electric field. The experimentally observed intralayer band-to-band tunneling and interlayer band-to-band tunneling in this material present an opportunity for new electronic applications in tunnel field-effect transistors. However, such a widely accepted concept has yet to be been supported by theoretical investigations based on first principles. In this paper, using density functional theory, in conjunction with nonequilibrium Green's function techniques and our electric field gating method, enabled by a large-scale computational approach, we study the relation between band alignment and transmission in planar and side-stack MoS 2 p–i–n junction configurations. Here, we demonstrate the presence of negative differential resistance for both in-plane and interlayer current, a staple characteristic of tunnel diode junctions, and analyze the physical origin of such an effect. Electrostatic potentials, the van der Waals barrier, and a complex band analysis are also examined for a thorough understanding of Esaki diodes.
To determine the feasibility of coupling the output of an optical fiber to a rib waveguide in a temperature environment ranging from 20 C to 300 C, a theoretical calculation of the coupling efficiency between the two was investigated. This is a significant problem which needs to be addressed to determine whether an integrated optic device can function in a harsh temperature environment. Because the behavior of the integrated-optic device is polarization sensitive, a polarization-preserving optic fiber, via its elliptical core, was used to couple light with a known polarization into the device. To couple light energy efficiently from an optical fiber into a channel waveguide, the design of both components should provide for well-matched electric field profiles. The rib waveguide analyzed was the light input channel of an integrated-optic pressure sensor. Due to the complex geometry of the rib waveguide, there is no analytical solution to the wave equation for the guided modes. Approximation or numerical techniques must be utilized to determine the propagation constants and field patterns of the guide. In this study, three solution methods were used to determine the field profiles of both the fiber and guide: the effective-index method (EIM), Marcatili's approximation, and a Fourier method. These methods were utilized independently to calculate the electric field profile of a rib channel waveguide and elliptical fiber at two temperatures, 20 C and 300 C. These temperatures were chosen to represent a nominal and a high temperature that the device would experience. Using the electric field profile calculated from each method, the theoretical coupling efficiency between the single-mode optical fiber and rib waveguide was calculated using the overlap integral and results of the techniques compared. Initially, perfect alignment was assumed and the coupling efficiency calculated. Then, the coupling efficiency calculation was repeated for a range of transverse offsets at both temperatures. Results of the calculation indicate a high coupling efficiency can be achieved when the two components were properly aligned. The coupling efficiency was more sensitive to alignment offsets in the y direction than the x, due to the elliptical modal profile of both components. Changes in the coupling efficiency over temperature were found to be minimal.
An increasing magnetic field perpendicular to an undoped semiconductor surface at low temperature is known to strengthen the binding of localized electrons to stationary ions, as the wavefunction's tails evolve from exponential to Gaussian. It is also known that application of a high bias voltage to a depleted semiconductor can liberate bound charge and induce a large drop in electrical resistance. We connect these established results to experimental electrical transport measurements on off-state germanium Schottky-barrier metal–oxide–semiconductor field-effect transistor (MOSFETs) with an aluminum oxide insulating dielectric and platinum germanide contacts. We make measurements at the three distinct orientations of the magnetic field with respect to the substrate and the current. At 6 K, we observe sharp attenuation of current by more than 2 orders of magnitude, within 60 mT, at a crossover magnetic field perpendicular to the substrate. A 1 T magnetic field attenuates the current by more than 4 orders of magnitude. The strength of the attenuation and the value of the crossover field are controlled by both the gate–source and drain–source voltages. The attenuation is much weaker when the magnetic field is parallel to the current. Finally, we orient the magnetic field parallel to the substrate, but perpendicular to the current, allowing us to distinguish charge hopping at the oxide interface from charge hopping in the bulk. In conclusion, this large off-state magnetoresistance can be exploited for cryogenic magnetic- and photo-detection, and for high-bias, low-leakage MOSFETs.
Abstract We study helical structures in spin-spiral single crystals. In the continuum approach for the helicity potential energy the simple electronic band splits into two non-parabolic bands. For low exchange integrals, the lower band is described by a surface with a saddle shape in the direction of the helicity axis. Using the Boltzmann equation with the relaxation due to acoustic phonons, we discover the dependence of the current on the angle between the electric field and helicity axis leading to the both parallel and perpendicular to the electric field components in the electroconductivity. The latter can be interpreted as a planar Hall effect. In addition, we find that the transition rates depend on an electron spin allowing the transition between the bands. The electric conductivities exhibit nonlinear behaviors with respect to chemical potential µ . We explain this effect as the interference of the band anisotropy, spin conservation, and interband transitions. The proposed theory with the spherical model in the effective mass approximation for conduction electrons can elucidate nonlinear dependencies that can be identified in experiments. We find the excellent agreement between the theoretical and experimental data for parallel resistivity depending on temperature at the phase transition from helical to ferromagnetic state in a M n P single crystal. In addition, we predict that the perpendicular resistivity abruptly drops to zero in the ferromagnetic phase.
To determine the feasibility of coupling the output of a single-mode optical fiber into a single-mode rib waveguide in a temperature varying environment, a theoretical calculation of the coupling efficiency between the two was investigated. Due to the complex geometry of the rib guide, there is no analytical solution to the wave equation for the guided modes, thus, approximation and/or numerical techniques must be utilized to determine the field patterns of the guide. In this study, three solution methods were used for both the fiber and guide fields; the effective-index method (EIM), Marcatili's approximation, and a Fourier method. These methods were utilized independently to calculate the electric field profile of each component at two temperatures, 20 C and 300 C, representing a nominal and high temperature. Using the electric field profile calculated from each method, the theoretical coupling efficiency between an elliptical-core optical fiber and a rib waveguide was calculated using the overlap integral and the results were compared. It was determined that a high coupling efficiency can be achieved when the two components are aligned. The coupling efficiency was more sensitive to alignment offsets in the y direction than the x, due to the elliptical modal field profile of both components. Changes in the coupling efficiency over temperature were found to be minimal.
Abstract The performance of thermoelectric devices is gauged by the dimensionless figure of merit $${{{{{\boldsymbol{ZT}}}}}}$$ ZT . Improving $${{{{{\boldsymbol{ZT}}}}}}$$ ZT has proven to be a formidable challenge given the interdependence of its constitutive quantities, namely Seebeck coefficient, electrical conductivity, thermal conductivity, and temperature. Here, we use quantum confinement to decouple Seebeck coefficient and electrical conductivity to demonstrate an order of magnitude quantum-based enhancement to the thermoelectric figure of merit $${{{{{\boldsymbol{ZT}}}}}}$$ ZT in complimentary metal-oxide-semiconductor field-effect transistors. While most quantum-based enhancement is done through physical confinement using two-dimensional materials, our approach uses electrical confinement. Because of this, our device is more robust than the two-dimensional materials currently used. We further articulate that improvement by as much as a factor of 50 could be achieved in a practical setting. Our approach further provides a path for monolithic integration of on-chip coolers and energy scavengers with virtually no deviation from the fabrication flow of standard electronics.
Carrying information using generation and detection of the orbital current, instead of the spin current, is an emerging field of research, where the orbital Hall effect (OHE) is an important ingredient. We show that the 2D transition metal dichalcogenides (TMDCs) such as MoX2, a currently popular class of materials of considerable interest, may in fact be excellent systems to observe the OHE. This is due to the broken inversion symmetry and the specific nature of the electron states at the K, K$^\prime$ valley points, that lead to robust momentum-dependent orbital moments, which flow in different directions due to the opposite Berry curvatures under an applied electric field. This is in complete contrast to the inversion-symmetric systems studied so far, where the (weak) orbital moment is induced only after the application of the external electric field. In addition, the spin-orbit coupling leads to the spin Hall effect, which we find to be quite small in the TMDCs, making these materials particularly suitable for direct observation of the OHE, with potential application in orbitronics.
Advanced Air Mobility (AAM), including Urban Air Mobility (UAM), vehicles may be required to meet stringent High-Intensity Radiated Fields (HIRF) certification requirements. HIRF can cause interference and even damage to vehicle systems. A recently proposed map-based avoidance approach can help reduce HIRF protection costs compared to the standard approach. However, it necessitates knowing the locations, frequencies, and transmit powers of high-power antennas within the operating area. This study aims to provide the necessary transmitter data by utilizing regulatory license databases. Using New York City as a representative urban area, fixed transmitter data are presented for AM, FM, TV, satellite uplink, land-mobile radio, microwave link, weather radars, and others. The maximum effective isotropic radiated powers of the antenna are reported. The associated electric field envelopes at 100 feet (30.48 m) distance are compared against the current rotorcraft HIRF standard. The results show that the current standards for protecting vehicles are inadequate. Maps of regions with high HIRF are illustrated. Data for several other cities are also being considered.