Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPLOSIVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Time-temperature-stress superposition of PBX 9502 compressive creep data for lifetime predictions

The plastic-bonded explosive (PBX) 9502 is a viscoelastic, high-solids loaded polymer bound composite comprised of 95 weight% (wt%) TATB explosive crystals and 5 wt% FK-800 polymer binder. The uniaxial quasi-static mechanical properties have been studied and characterized extensively over 25+ years, including creep. Creep is the strain evolution over time as a result of an asymmetric load typically at temperatures above ambient. Creep measurements to failure can take excessively long periods of time depending on various factors including applied stress, temperature, and loading rate that render a single test to failure impossible. Using the principles of time-temperature-stress superposition (TTSSP), short-term creep tests at various applied stresses and temperatures can be used for long-term creep predictions. The TTSSP model shifts short-term test data using two factors, one for temperature and stress, creating a master curve at a reference test condition. The master curve can be shifted to predict the creep response at any desired test condition. PBX 9502 compression specimens were tested at three temperatures and various applied stresses. This work discusses the TTSSP analysis of PBX 9502 compressive creep data to create a single comprehensive master curve.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of PBX prill size on the compressive properties of PBX 9502

Plastic-Bonded Explosive (PBX) prills are agglomerates a few millimeters in diameter composed of High Explosive crystals non-uniformly distributed in and surrounded by a polymer binder. When pressed at elevated temperatures at or above the binder melt temperature the polymer flows to uniformly coat the HE crystals to create a well-consolidated compaction. In reality it does so imperfectly, such that x-ray tomographic scans often look like a collection of prills mashed together. It is speculated that the larger the prill, the more non-uniform the binder distribution, but this has never been proven. Even if that were not so, the larger the prill the farther binder must flow toward the middle to homogenize during pressing. Thus, the degree of homogenization depends in part on prill size. The degree to which binder flows during pressing in turn affects the void distribution within pressed charges, which one suspects will affect shock sensitivity and material strength. In this paper we explore, for ~30 PBX 9502 formulation batches using the same TATB powder lot, how prill size affects the compressive mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Experimental and modelling study of the effect of pre-shock duration on the double shock initiation response of PBX 9501

Here, a series of double shock initiation gas-gun experiments have been performed on PBX 9501 (95% weight HMX, 5% binder) in which the input conditions were nominally the same, but the time delay between the two shocks was explicitly varied. The impact conditions generated pre- and main shock pressures of 2.9 and 6.2 GPa respectively, with time delays between them ranging from 0.56 to 1.10 µs. This resulted in different levels of reaction behind the pre-shock prior to the main shock traversing the explosive samples, with the growth of reaction monitored using embedded particle velocity and shock tracker gauges. Simulated results from three reactive burn models (CREST, AWSD and SURF) are compared with the measured data to assess their ability to predict the response of PBX 9501 under such double shock conditions. The described experiments add to the body of evidence to help improve our understanding of the double shock initiation response of explosives, and the data obtained provide an excellent test for reactive burn models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Microstructural investigation of PBX 9501: Comparing wet slurry and resonant acoustic mixing techniques

The microstructure of a high explosive (HE) material directly influences the reactive behavior under a variety of insults. Furthermore, the preparation method of polymer-bonded explosives (PBX), as well as the constituent material particle size distribution and consolidation parameters, will dominate the microstructural features that are observed. Here, we compare batches of PBX 9501 prepared by the typical wet slurry process and those prepared by resonant acoustic mixing. The “prills” produced by the wet slurry process leads to an inherently different microstructure than the coated powder produced by resonant acoustic mixing. Additionally, we observed that the conditions required to consolidate (press) the material to the nominal PBX 9501 density varied depending on the preparation technique, which also dictates the observed binder distribution. Furthermore, X-ray microcomputed tomography and ultra-small-angle X-ray scattering analyses revealed distinct differences in the void structure and distribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Shock Hugoniot measurements of single-crystal 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) compressed to 83 GPa

We present laser-driven shock Hugoniot measurements of single-crystal (SC) 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) between 15 and 83 GPa, spanning pressures below and well above the Chapman–Jouguet pressure of ~28 GPa for TATB formulations (TATB grains mixed with plastic binders at 5–10 wt. %). The new SC data are generally ~3% more compressible than previously published data on neat and formulated TATB measured in gas-gun and explosive-driven experiments. An exception is at compressions in the density of ~1.5 (~30–40 GPa), where our new SC data exhibit significantly lower pressures than previous results on overdriven TATB formulations, suggesting that our SC samples remain largely unreacted below 35 GPa over the short nanosecond-time scales inherent to our laser-driven experiments. We report these novel equation-of-state measurements are a critical step toward understanding TATB in its most fundamental form and improving predictive modeling of TATB-based explosives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of void positioning on the detonation sensitivity of a heterogeneous energetic material

We show although it is well-established that voids profoundly influence the initiation and reaction behaviors of heterogeneous energetic materials such as polymer-bonded explosives (PBX) and propellants, there has been little study of how void location in different constituents in the microstructures of such materials affect the macroscale behavior. Here, we use three-dimensional (3D) mesoscale simulations to study how void placement within the reactive grains versus the polymer binder influences the shock-to-detonation transition (SDT) in a polymer-bonded explosive. The material studied here has a microstructure comprised of 75% PETN (pentaerythritol tetranitrate) grains and 25% HTPB (hydroxyl-terminated polybutadiene) polymer binder by volume. Porosities up to 10% in the form of spherical voids distributed in both the grains and polymer are considered. An Arrhenius reactive burn relation is used to model the chemical kinetics of the PETN grains under shock loading, thereby resolving the heterogeneous detonation behavior of the PBX. The influence of void location on the shock initiation sensitivity of the material is quantitatively ranked by comparing the predicted run distance to detonation (RDD) for each sample. The analysis includes inherent quantification of uncertainties arising from the stochastic variations in the microstructure morphologies and void distributions by using statistically equivalent microstructure sample sets (SEMSS), leading to probabilistic formulations for the RDD as a function of shock pressure. The calculations reveal that the location of voids in the composite microstructure significantly affects the RDD. Specifically, voids exclusively within the grains cause the PBX to be more sensitive (having shorter RDD) than voids in the polymer binder. Unique probabilistic relationships are derived to map the probability of observing RDD for each void location material case, allowing for prediction of initiation behavior anywhere in the shock pressure – RDD space. These findings agree with trends reported in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Flame acceleration and transition to detonation in a pre-/main-chamber combustion system

Numerical simulations are performed to study the mechanism of deflagration to detonation transition (DDT) in a pre-/main-chamber combustion system with a stoichiometric ethylene–oxygen mixture. A Godunov algorithm, fifth-order in space, and third-order in time, is used to solve the fully compressible Navier–Stokes equations on a dynamically adapting mesh. A single-step, calibrated chemical diffusive model described by Arrhenius kinetics is used for energy release and conservation between the fuel and the product. The two-dimensional simulation shows that a laminar flame grows in the pre-chamber and then develops into a jet flame as it passes through the orifice. A strong shock forms immediately ahead of the flame, reflecting off the walls and interacting with the flame front. The shock–flame interactions are crucial for the development of flame instabilities, which trigger the subsequent flame development. The DDT arises due to a shock-focusing mechanism, where multiple shocks collide at the flame front. A chemical explosive mode analysis (CEMA) criterion is developed to study the DDT ignition mode. Preliminary one-dimensional computations for a laminar propagating flame, a fast flame deflagration, and a Chapman–Jouguet detonation are conducted to demonstrate the validity of CEMA on the chemical-diffusive model, as well as to determine the proper conditioning value for CEMA diagnostic. The two-dimensional analysis with CEMA indicates that the DDT initiated by the shock-focusing mechanism can form a strong thermal expansion region at the flame front that features large positive eigenvalues for the chemical explosive mode and dominance of the local autoignition mode. Thus, the CEMA criterion proposed in this study provides a robust diagnostic for identifying autoignition-supported DDT, of which the emergence of excessive local autoignition mode is found to be a precursor. The effect of grid size, initial temperature, and orifice size are then evaluated, and results show that although the close-chamber DDT is highly stochastic, the detonation initiation mechanism remains robust.

42 ENGINEERING↗
DOE OSTI2025

Simultaneous inference of equation of state parameters and unknown data errors with uncertainty quantification via hierarchical Bayesian posterior maximization

Equations of state (EOSs) are a key component in running hydrodynamic simulations as they relate the thermodynamic states for the material. The Davis reactants EOS is commonly used for modeling high explosives (HEs), and the EOS model parameters are calibrated using material specific data. The calibrations are often performed with uncertainty quantification via Bayesian inference to account for uncertainty in the data and generate ensembles of likely parameters. However, there are relatively few HE data sets to use for calibration and many are historical and lack error information. In this work, we simultaneously calibrate the Davis reactants EOS model parameters and unknown data error terms for the high explosive PBX 9501. To quantify the uncertainty in the models and the data, we use a Bayesian framework for the calibration and compute the hierarchical Bayesian posterior distribution with both a posteriori maximization approach and Markov Chain Monte Carlo. In general, we find that, given our assumptions, the two approaches result in similar calibrated parameters, posterior covariance matrices, and insights about the parameters but that the posterior maximization requires far less computational resources.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Woolwich, Bruceton, Los Alamos: Munroe Jets and the Trinity Gadget

Prewar work on the hydrodynamics of explosives and U.S./UK scientific cooperation well beyond Los Alamos contributed to the design of the explosive lenses for the Trinity gadget. Researchers were deliberately brought together and encouraged to share ideas by the leaders of the wartime laboratory. James Tuck, one of the British mission scientists, made particularly interesting contributions in this area, but this paper is not a claim of British or any other individual parentage. Rather, it highlights the importance of collaboration at Los Alamos and more widely.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

γ -ray spectroscopy of astrophysically important states in Ca 39

Background: Nova explosions synthesize elements up to A ≃ 40 , and discrepancies exist between calculated and observed abundances of Ar and Ca created in the explosion. The K 38 ( p , γ ) Ca 39 reaction rate has been illustrated to be influential on these isotopic abundances at the endpoint of nova nucleosynthesis. The energies of the three most important resonances, corresponding to J π = 5 / 2 + excited states in the Ca 39 nucleus above the proton separation threshold, are uncertain and one has been measured with conflicting values [ E r = 679 ( 2 ) versus E r = 701 ( 2 ) keV] in previous experiments. Purpose: Reducing the uncertainties on the resonance energies would allow for a better understanding of the reaction rate. To improve these uncertainties, we searched for γ rays from the depopulation of the corresponding excited states in Ca 39 . Methods: We report a new measurement of these resonance energies via the observation of previously unobserved γ -ray transitions. These transitions were observed by studying the Ca 40 ( 3 He , α γ ) Ca 39 reaction with Gammasphere ORRUBA Dual Detectors for Experimental Structure Studies (GODDESS). The updated resonance energies were then used to calculate the K 38 ( p , γ ) Ca 39 reaction rate and assess its uncertainties. Results: In total, 23 new transitions were found, including three γ -ray transitions corresponding to the three J π = 5 / 2 + states of astrophysical interest at energies of 6156.2(16), 6268.8(22), and 6470.8(19) keV. These correspond to resonance energies in the K 38 ( p , γ ) Ca 39 reaction of 386(2), 498(2), and 701(2) keV. Conclusions: Updated K 38 ( p , γ ) Ca 39 reaction rate calculations reflect a reduced upper limit at nova temperatures. However, the lower-than-previously-measured energy of the 498-keV resonance and uncertainty in its resonance strength increases the upper limit of the rate close to previous estimates at 0.4 GK.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Spectroscopy of 30 P and the abundance of 29 Si in presolar grains

The astrophysical 29 Si(p,γ) reaction is expected to play a key role in determining the final 29 Si yields ejected in nova explosions. Such yields are used to accurately identify the stellar origins of meteoritic stardust and recently, distinctive silicon isotopic ratios have been extracted from a number of presolar grains. Here, the light-ion 28 Si( 3 He,p) fusion-evaporation reaction was used to populate low-spin proton-unbound excited states in the nucleus 30 P that govern the rate of the astrophysical 29 Si(p,γ) reaction. In particular, γ decays were observed from resonances up to E r = 500keV, and key resonances at 217 and 315 keV have now been identified as 2 + and 2¯ levels, respectively. Here, the present paper provides the first estimate of the 217-keV resonance strength and indicates that the strength of the 315-keV resonance, which dominates the rate of the 29 Si(p,γ) reaction over the entire peak temperature range of oxygen-neon novae, is higher than previously expected. As such, the abundance of 29 Si ejected during nova explosions is likely to be less than that predicted by the most recent theoretical models.

20 ≤ A ≤ 38↗
DOE OSTI2021

Characteristics of thermospheric infrasound predicted using ray tracing and weakly non-linear waveform analyses

Infrasonic signals refracted by thermal gradients in the rarefied upper atmosphere are modeled using a combination of ray tracing and weak shock theory to develop an understanding of thermospheric infrasound signals produced by energetic, transient sources. Canonical arrival structures in the form of u-wave signatures are identified for returns refracted at lower altitudes within the thermosphere, and possible multi-pathing produced by effective sound speed inflections are investigated to elucidate more complex arrival structures, which are found to be spatially localized. Furthermore, variability in the source characteristics is investigated and it is found that whereas some waveform phase information is lost due to finite amplitude effects, arrival characteristics are strongly dependent on the peak overpressure near the source. Variability in the propagation path is considered using archived atmospheric specifications and implies that despite uncertainties related to the dynamic and sparsely sampled nature of the atmosphere, thermospheric signatures might be useful in estimating the yield for explosive sources. Last, thermospheric arrivals from a failed rocket launch, as well as those from several large chemical explosions, are analyzed and it is found that qualitative trends match those predicted, and analyses here provide additional insight into such signatures.

42 ENGINEERING↗
DOE OSTI2021

Simulation of flame acceleration and deflagration-to-detonation transition with heat transfer in HE product and fractured HE

A simple heat transfer model has been developed for high explosives. For the gaseous high explosive (HE) product, the Smargorinsky eddy viscosity model has been adopted for estimating the turbulent thermal conductivity. Convective heat transfer in the fractured solid HE is modeled as the effective thermal conduction in the porous media, which is equivalent to the enthalpy flux carried by the velocity determined by Darcy’s law with Forchheimer term.Other features of the model include a multi-reaction chain, equation-of-state for each species involved, and a two-phase hotspot model. Test calculations are performed with various initial disturbances. Onset and progress of flame acceleration (FA) and chemical reactions are strongly affected by the heat transfer and initial disturbance. Staged development of FA also affirms the necessity of modeling based on a multi-reaction chain. When conditions warrant,e.g., stronger initial disturbance, FA evolves to deflagration-to-detonation transition (DDT),demonstrating automatic capture of the DDT.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Project ν x B: Novel Application of Neutrinos to Evaluate U.S. Nuclear Weapons Performance

In this white paper, we discuss the feasibility of diagnosing a nuclear explosion using a neutrino detector. This idea was first proposed by Reines and Cowan to observe the then hypothesized neutrino. Since then, the neutrino was discovered and over the decades the field of neutrino research has matured and many properties of the neutrino have been measured such as interaction cross sections, masses, abundances, etc. The neutrino has been observed from the sun, supernova, nuclear reactors, accelerators, and even the Earth’s core. Interestingly, one of the most prolific sources of neutrinos, a man-made nuclear explosion, has yet to be detected.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Diffraction Measurement of Reaction Products in Shock Compressed TATB on the NIF

The shock-induced reaction of high explosives to gaseous and solid reaction products is a rapid, complex process. Understanding solid reaction product structure and formation kinetics is essential in determining the high-pressure equation of state of these multicomponent systems. We use the National Ignition Facility (NIF) to shock compress ~500-µm thick pressed powder high-explosive TATB samples to 70-135 GPa and collect in situ structural data on detonation byproducts using the TARDIS X-ray diffraction diagnostic. Velocimetry is used to record the transmitted compression wave profile, which is well described by Cheetah hydrocode simulations coupled with a reactive flow model, providing strong evidence of reaction in the TATB sample. While an unambiguous determination of the product phases was not possible owing to the low signal-to-noise quality of the diffraction signal, X-ray diffraction data of the product phases formed within the first 50 ns of the reaction is most consistent with a mixture of amorphous products and crystalline hexagonal diamond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Safe Response to Renewable Energy Hazards

The International Association of Fire Fighters (IAFF) and Underwriters Laboratories, LLC (UL) in conjunction with UL Solutions initiated a joint project in 2022 under an agreement with the United States Department of Energy-Office of Energy Efficiency and Renewable Energy (DOE-EERE). This project focused on two separate and important initiatives related to energy efficiency in residential buildings. Initiative 1: Fire Performance on Energy Efficient Exterior Walls. Initiative 2: Firefighting Tactics in Residential Properties with Building Energy Storage Systems (BESS). The project’s first initiative addresses concerns surrounding new technologies with enhanced, energy-efficient exterior walls installed on residential properties. The concerns of fire rapidly traveling vertically up the exterior of these walls were examined. This addressed a growing concern from the first responder community that many times, the fires on the exterior of residential buildings have already evolved into an attic fire by the time of arrival – making it problematic to address the fire scenario. The test plan for Initiative 1 incorporated a modified version of an American Society for Testing and Materials (ASTM) test method, ASTM E2707, Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure, as the foundation of the research. The test method involved a wall structure intended to represent retrofit construction to evaluate how fire would spread vertically or laterally. The second aspect of the UL-IAFF Project focuses on the fire service response to Residential Battery Energy Storage System (RBESS) incidents. These simulation tests were constructed in the large-scale fire test facility at UL Solutions’ Northbrook, IL campus. A baseline test was conducted that involved a test structure with no batteries—shelving units populated with standardized commodities, representing a typical garage with cellulosic and plastic contents. Three additional tests have been conducted to generate data with the contribution of energy storage system (ESS) batteries to compare fire and explosion hazards against the baseline test. Through this work, fire service tactical considerations can be explored. From the data, the team can determine 1) the visual indicators of a residential fire that has involved an RBESS (or, potentially, other large batteries) and 2) the impact of fire service-initiated ventilation of the structure on the fire conditions and explosion risks.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Seismic velocity modeling and earthquake relocations for the southern Nevada National Security Site (NNSS), with a focus on Rock Valley

The Rock Valley Direct Comparison (RV/DC) is the third phase of the Source Physics Experiment (SPE; Snelson et al., 2014), a project aimed at improving seismic discrimination between explosive sources and natural earthquakes. Phases I and II of SPE focused on studying the generation of shear waves in endmember geologies (granite and alluvium, respectively), while Phase III aims to detonate a chemical explosion co-located with the source region of the 1993 Rock Valley earthquake sequence, located in the Rock Valley Fault Zone (RVFZ), in the southern portion of the Nevada Test Site (now the Nevada National Security Site, or NNSS).

58 GEOSCIENCES↗
DOE OSTI2025

Assessing the Potential Impact of Fugitive Methane Emissions on Offshore Platform Safety

One of the biggest risks to safety on offshore platform safety is the ignition of high-pressure natural gas streams. Currently, the size and number of fugitive emissions on offshore platforms is unknown and methods used to detect fugitives have significant shortcomings. To investigate the frequency, size, and potential impact of fugitives, a data collection exercise was conducted using incidents reported, leak survey data, and independent measurements. The size and number of fugitives on offshore facilities were simulated to investigate likely areas of safety concern. Incident reports indicate in 2021 there were 113 reports of gas leaks on 1119 offshore facilities, suggesting 0.02 fugitives per Type 1 facility (older, shallow-water platforms) and 0.31 fugitives per Type 2 facility (larger deeper-water facilities). Leak survey data report 12 fugitives per Type 1 facility (average emission 0.6 kg CH 4 h −1 leak −1 ) and 15 fugitives per Type 2 facility (average emission 1.5 kg CH 4 h −1 leak −1 ). Reconciliation of direct measurements with a bottom-up model suggests that the number of fugitive emissions generated from the leak report data is an underestimate for Type 1 platforms (44 fugitives facility −1 ; average emission 0.6 kg CH 4 h −1 leak −1 ) and in general agreement for the Type 2 platforms (15 fugitives facility −1 ; average emission 1.5 kg CH 4 h −1 leak −1 ). Analysis of the fugitive emission rates on an offshore platform suggests that gas will not collect to explosive concentration if any air movement is present (>0.36 mph); however, large volumes of air (~600 m 3 ) near representative leaks on the working deck could become explosive in hour-long zero-wind conditions. We suggest that wearable technology could be employed to indicate gas build up, safety regulations amended to consider low-wind conditions and real-world experiments are conducted to test assumptions of air mixing on the working deck.

explosion↗