Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Modeling of human operator dynamics in simple manual control utilizing time series analysis

Time series analysis is applied to model human operator dynamics in pursuit and compensatory tracking modes. The normalized residual criterion is used as a one-step analytical tool to encompass the processes of identification, estimation, and diagnostic checking. A parameter constraining technique is introduced to develop more reliable models of human operator dynamics. The human operator is adequately modeled by a second order dynamic system both in pursuit and compensatory tracking modes. In comparing the data sampling rates, 100 msec between samples is adequate and is shown to provide better results than 200 msec sampling. The residual power spectrum and eigenvalue analysis show that the human operator is not a generator of periodic characteristics.

Agarwal, G. C.↗
NASA NTRS1981

The Fabry-Perot Interferometer on Dynamics Explorer

The Fabry-Perot Interferometer (FPI) on Dynamics Explorer is a remote sensing instrument designed to measure the temperature, meridional wind and density of the metastable atoms O(1S) and O(1D), and the ion O(plus)(2P) in the thermosphere. The measurements are made with a stable, high resolution Fabry-Perot etalon, which performs a wavelength analysis on the light detected from the thermospheric emission features by spatially scanning the interference fringe plane with a multichannel array detector. The wavelength analysis characterizes the Doppler line profile of the emitting species. A sequential altitude scan, performed by a commandable horizon scan mirror, provides a cross-sectional view of the thermodynamic and dynamic state of the thermosphere below the orbit of the Dynamics Explorer B satellite.

Hays, P. B.↗
NASA NTRS1980

Dynamic properties of mare basalts - Relation of equation of state to petrology

A comparison of shock compression and release adiabat data to 160 GPa for the 12063 low-titanium mare basalt with previous results for the high-titanium, 70215 mare basalt shows that, while the two rocks have very similar zero-pressure densities, the former is much less compressible above 100 GPa. This demonstrates that rocks with complex mineralogies can have significantly different dynamic properties despite a similarity of oxide components. The 10% higher ilmenite content of 70215 is suggested as an explanation for the contrasting dynamic properties of the two rocks. Because the 12063 high-pressure data presented lie midway between the 70215 data and those previously obtained for the anorthosite that is the dominant constituent of the lunar highlands, it is concluded that the behavior of lunar surface material under dynamic compression is terrane-dependent; where this dependence is (1) found to extend to different regions of the maria, and (2) may affect the determination of the relative ages of different rock units from areal crater densities.

Ahrens, T. J.↗
NASA NTRS1982

Dynamical constraints on the formation and evolution of planetary bodies

The present investigation is concerned with a number of inferences as to the origin of planetary bodies, taking into account the present dynamical state of the solar system and some of the limitations which apply to the considered conclusions. Attention is given to the dynamical processes, specifically those processes which may have influenced the orbital or rotational properties of the planets and satellites. Collisional processes are explored, taking into consideration orbital spacing, planetary rotation, and stochastic effects. In connection with a discussion of the evolution of rotational motion, spin state evolution is investigated along with spin axis precession and resonance variation, and the Cassini states. The evolution of planetary orbits is also studied. The subjects considered are related to tides, secular resonances, disk dynamics, and disk-satellite interactions.

Harris, A. W.↗
NASA NTRS1982

A simple criterion for determining the dynamical stability of three-body systems

Coplanar, prograde three-body systems (TBS) are discussed, emphasizing the specification of general criteria for determining whether such systems are dynamically stable. It is shown that the Graziani-Black (1981) criteria provide a quantitatively accurate characterization of the onset of dynamic instability for values of the dimensionless mass ranging from one millionth to one million. Harrington's (1977) general criterion and the Graziani-Black criterion are compared with results from analytic work that spans a 12-orders-of-magnitude variation in the mass ratios of the TBS components. Comparison of the Graziani-Black criteria with data for eight well-studied triple-star systems indicates that the observed lower limit for the ratio of periastron distance of the tertiary orbit to the semimajor axis of the binary orbit is due to dynamical instability rather than to cosmogonic processes.

Black, D. C.↗
NASA NTRS1982

The dynamics of the Venus ionosphere. I - A simulation of the solar wind compression of the upper dayside ionosphere

One of the most exciting discoveries by the Pioneer Venus mission is the extreme variability in the structure of the Venus atmosphere. The solar wind plays a major, although as yet not well-defined, role in the dynamics of the ionosphere. An investigation is being conducted regarding the response of the dayside Venus ionosphere to changing solar wind conditions, in particular to the varying solar wind dynamic pressure. In the present study the dynamics of the upper (h equal to or greater than 200 km) ionosphere are simulated numerically using a one-dimensional, spherically symmetric, Lagrangian hydrodynamic code developed by Stein and Schwartz (1972). The ionosphere is assumed to be unmagnetized and is represented with a two-fluid model. The initial ionosphere is chosen to be in pressure equilibrium with the solar wind at the ionopause. It is shown how some of the time-dependent features of the Venus ionosphere may be simulated with the considered model.

Wolff, R. S.↗
NASA NTRS1981

Experimental research on structural dynamics and control

This report describes an apparatus at the NASA Langley Research Center for conducting research on dynamics and control of structural dynamics systems. The apparatus consists of a 3.66 m (12 ft.) long flexible beam to which are attached four electromagnetic actuators, nine noncontacting sensors to measure deflection of beam at various locations, and four strain gage type load cells one at each actuator attachment point. The important feature of the apparatus is that the actuators can be controlled and deflection and load sensor data can be processed in real time using the research centers CDC Cyber 175 computer system - thereby allowing research to be conducted on structural dynamics systems using advanced control laws. The facility is described in the report along with a detailed discussion of the actuators used.

Montgomery, R. C.↗
NASA NTRS1982

Dynamic responses of graphite/epoxy laminated beam to impact of elastic spheres

Wave propagation in 90/45/90/-45/902s and 0/45/0/-45/02s laminates of a graphite/epoxy composite due to impact of a steel ball was investigated experimentally and also by using a high order beam finite element. Dynamic strain responses at several locations were obtained using strain gages. The finite element program which incorporated statically determined contact laws was employed to calculate the contact force history as well as the target beam dynamic deformation. The comparison of the finite element solutions with the experimental data indicated that the static contact laws for loading and unloading (developed under this grant) are adequate for the dynamic impact analysis. It was found that for the 0/45/0/-45/02s laminate which has a much larger longitudinal bending rigidity, the use of beam finite elements is not suitable and plate finite element should be used instead.

Sun, C. T.↗
NASA NTRS1983

Literature search of publications concerning the prediction of dynamic inlet flow distortion and related topics

Publications prior to March 1981 were surveyed to determine inlet flow dynamic distortion prediction methods and to catalog experimental and analytical information concerning inlet flow dynamic distortion prediction methods and to catalog experimental and analytical information concerning inlet flow dynamics at the engine-inlet interface of conventional aircraft (excluding V/STOL). The sixty-five publications found are briefly summarized and tabulated according to topic and are cross-referenced according to content and nature of the investigation (e.g., predictive, experimental, analytical and types of tests). Three appendices include lists of references, authors, organizations and agencies conducting the studies. Also, selected materials summaries, introductions and conclusions - from the reports are included. Few reports were found covering methods for predicting the probable maximum distortion. The three predictive methods found are those of Melick, Jacox and Motycka. The latter two require extensive high response pressure measurements at the compressor face, while the Melick Technique can function with as few as one or two measurements.

Schweikhhard, W. G.↗
NASA NTRS1983

Dynamic tooth loads and stressing for high contact ratio spur gears

An analysis and computer program were developed for calculating the dynamic gear tooth loading and root stressing for high contact ratio gearing (HCRG) as well as LCRG. The analysis includes the effects of the variable tooth stiffness during the mesh, tooth profile modification, and gear errors. The calculation of the tooth root stressing caused by the dynamic gear tooth loads is based on a modified Heywood gear tooth stress analysis, which appears more universally applicable to both LCRG and HCRG. The computer program is presently being expanded to calculate the tooth contact stressing and PV values. Sample application of the gear program to equivalent LCRG (1.566 contact ratio) and HCRG (2.40 contact ratio) revealed the following: (1) the operating conditions and dynamic characteristics of the gear system an affect the gear tooth loading and root stressing, and therefore, life significantly; (2) the length of the profile modification affect the tooth loading and root stressing significantly, the amount depending on the applied load, speed, and contact ratio; and (3) the effect of variable tooth stiffness is small, shifting and increasing the response peaks slightly from those for constant tooth stiffness.

Cornell, R. W.↗
NASA NTRS1982

Development of methodology for horizontal axis wind turbine dynamic analysis

Horizontal axis wind turbine dynamics were studied. The following findings are summarized: (1) review of the MOSTAS computer programs for dynamic analysis of horizontal axis wind turbines; (2) review of various analysis methods for rotating systems with periodic coefficients; (3) review of structural dynamics analysis tools for large wind turbine; (4) experiments for yaw characteristics of a rotating rotor; (5) development of a finite element model for rotors; (6) development of simple models for aeroelastics; and (7) development of simple models for stability and response of wind turbines on flexible towers.

Dugundji, J.↗
NASA NTRS1982

Dynamical history of the Oort Cloud

Oort's hypothesis for the origin of long-period comets is reviewed, along with evidence for the existence of the Oort Cloud and recent research in stellar perturbations of cometary orbits. A Monte Carlo model is used to analyze the dynamics of comets in the Oort Cloud, to estimate the present and original populations of the cloud, and to examine implications for various theories of the origin of comets. The problem of interstellar comets is briefly considered. It is concluded that: (1) the weight of evidence favors Oort's hypothesis of a cloud of a trillion comets surrounding the solar system and extending out to about 100,000 AU; (2) the dynamical evolution of the cloud is consistent with observational data on long-period comets; and (3) estimates of the population necessary to produce the observed flux of dynamically new comets lead to physically reasonable values for the current and initial cloud masses.

Weissman, P. R.↗
NASA NTRS1983

A survey of grid generation techniques in computational fluid dynamics

The use of numerically-generated body-conforming coordinate systems has become well-established in computational fluid dynamics, allowing general codes to be written which can treat boundaries of arbitrary shape. There is now a rapidly increasing interest in the dynamic coupling of the grid with the physical solution so that the grid lines continually move to achieve concentration in regions of strong variation of the physical solution and alignment with shocks, flame fronts, etc. Such adaptive coordinate systems have been developed using a variety of techniques for sensing and reacting to the developing regions of concentration and/or alignment. This paper reviews the techniques and applications of these dynamically adaptive systems and other systems.

Thompson, J. F.↗
NASA NTRS1983

Solar wind flow about the terrestrial planets. II - Comparison with gas dynamic theory and implications for solar-planetary interactions

Bow shock models are employed to determine and compare the solar wind flows about Venus, Mars, and the earth. Initially, gas dynamic theory predictions are compared with the large data base available for the near-earth environment. The observed shape and location of the magnetopause proved sufficient for predicting the average dayside bow shock position to within 2% error. Use of the same gas dynamics theory produced highly disparate results for the flows past Venus and Mars. A variation of 510-1000 km altitude (high) for the solar wind-obstacle interface was found for Mars, thus requiring the presence of an effective magnetic moment of within 0.6 of 1.4 x 10 to the 22nd G/cu cm in the Martian magnetosphere, consistent with Viking data. The Venus bow wave was calculated to be closer to the planet than possible with a purely ionospheric interaction, indicating that solar wind-neutral atmosphere interactions in the lower ionosheath must necessarily be included in a gas dynamic modeling of the Venus obstacle to the solar wind.

Slavin, J. A.↗
NASA NTRS1981

Simplified robot arm dynamics for control

A brief summary and evaluation is presented on the use of symbolic state equation techniques in order to represent robot arm dynamics with sufficient accuracy for controlling arm motion. The use of homogeneous transformations and the Lagrangian formulation of mechanics offers a convenient frame for the derivation, analysis and simplification of complex robot dynamics equations. It is pointed out that simplified state equations can represent robot arm dynamics with good accuracy.

Bejczy, A. K.↗
NASA NTRS1983

Dynamic mechanical characterization of cure of a polyimide-graphite fiber composite (PMR 15/Celion 6000)

Dynamic mechanical studies of thermosetting PMR 15 polyimide/Celion 6000 composites were used to characterize cure behavior. Variation in composite shear modulus with cure time for laminates partially cured under 3.45 MPa pressure was compared with that of laminates fully cured under pressure to select a partially cured system whose behavior corresponded with that of the pressure-cured composites. An empirical kinetic model was developed that relates relative composite shear moduli to cure time and temperature. This model, coupled with standard statistical techniques, was used in the determination of an overall activation energy, E = 145 kj/mole (35 kcal/mole) and order of reaction, n, for the cure reaction(s). The empirical relationship defining dynamic modulus as a function of time and temperature remained linear well into the glassy region. Changes in dynamic glass-transition temperature and in the breadth of the transition peaks with cure time are discussed. Shear modulus and damping were found to be more sensitive measures of relative extent of cure than Fourier transform infrared spectroscopy.

Hurwitz, F. I.↗
NASA NTRS1983

Dynamic-mechanical response of graphite/epoxy composite laminates and neat resin

Dynamic mechanical measurement results are presented for the case of carbon fiber-reinforced, epoxy matrix composite laminates subjected to loading perpendicular to the lamination plane, as well as for neat epoxy resin under the same conditions, where temperatures ranged between 20 and 200 C and deformation levels lie within the linear viscoelastic region. In-phase and out-of-phase stiffnesses are found to become superposed, forming master curves that cover a 12-decade frequency range. The application of a master curve scaling procedure shows that the in-phase stiffness has the same shape, and out-of-phase stiffness has the same dispersion, for all laminates irrespective of stacking sequence and are, in turn, nearly identical to those for the neat epoxy resin. An empirical function is found for the relaxation modulus which, when converted to a dynamic modulus, yields good overall agreement for both of the dynamic stiffness components as a function of frequency.

Yang, P.↗
NASA NTRS1982

Idealized dynamic grid computation of physical systems

The construction and utility of an idealized computational space for finite-difference computation of physical systems are considered. All computations are performed in tau space, which at any instant represents the dynamic grid of a subject physical system appropriately stretched into a uniform, orthogonal grid. A strain field model of physical system is described, including the sample computation of strain density fields. Dynamic grid generation using invariant-mapping is addressed, and the tau computational space is considered, including a grid dynamism constraint, a grid orthogonality constraint, and a grid smoothness constraint. The detailed tau computational space method is presented and illustrated with two sample problems.

Anyiwo, J. C.↗