Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Detect and Avoid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Automated Vehicles in Hazardous Merging Traffic: A Chance-Constrained Approach

To realize the energy efficiency and productivity benefits of automated driving, control algorithms must function safely among conventional vehicles. Prototype tests on public roads have revealed a trend of human-driven vehicles rear-ending automated ones. A popular belief holds that unusually conservative control algorithms play a role in such collisions. In August 2018, an automated vehicle was rear-ended while waiting to merge. Inspired by that incident, this paper examines a resemblant scenario in simulation using model predictive control for the automated vehicle. Constraint setup alternatives to avoid collisions with inattentive following vehicles are proposed and assessed in this simulation environment. In one variant, imminent rear-end collisions are detected and constraints are modified to promote more aggressive merging during such an event. Results show that higher-performing chance constraint designs can reduce collision probability, but may have other adverse effects depending on the particular algorithm.

Dollar, R. Austin↗
DOE OSTI2023

Cellulose Nanocrystals’ Role in Critical Mineral Beneficiation: Dual Aggregate-Dispersant Behavior Supports Environmentally Benign Nickel Processing

Environmentally unsustainable and toxic chemical flocculants and dispersants from nickel (Ni) processing contribute to industrial effluents that greatly impact biodiversity and aquatic life. Despite the industry’s efforts to reduce its ecological footprint—primarily due to the lack of commercially available biodegradable, environmentally benign, and non-toxic reagents—these reagents continue to harm natural ecosystems. Chemicals used during the processing operations often target a specific unit operation that negatively affects downstream operations. In this study, we discover the concentration-dependent behavior of cellulose nanocrystals (CNCs) as a dispersant and flocculant, avoiding the use of various harmful chemicals in the nickel processing stages. Electrophoretic, optical brightfield microscopy, and quartz crystal microbalance-dissipation studies detected charge neutralization behavior by renewable and biodegradable CNCs, which can greatly benefit Ni processing operations. Microflotation experiments demonstrated that CNCs enhanced Ni recovery from 62 to 77 wt.% and concentrate grade from 15 to 20 wt.%. Settling and turbidity studies demonstrated the dual flocculant-dispersant behavior of CNCs resulting from the alignment of CNC fibers along the octahedral brucite basal and amphoteric edge plane of serpentine. CNCs can be used as dispersants during froth flotation to improve Ni beneficiation and as post-processing flocculants for tailings management and dewatering, which is one of the major environmental and social concerns facing the mining and mineral processing industry. This study paves the way for CNCs to be used as flocculants and dispersants in a range of industries from healthcare to pharmaceuticals to semiconductor devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Machine learning for disruption warnings on Alcator C-Mod, DIII-D, and EAST

In this paper, we report on disruption prediction using a shallow machinelearning method known as Random Forests, trained on large databases containingonly plasma parameters that are available in real-time on Alcator C-Mod, DIII-D, and EAST. The database for each tokamak contains parameters sampled ~10 6 times throughout ~10 4 discharges (disruptive and non-disruptive) over the last 4years of operation. It is found that a number of parameters (e.g.P rad /P input ,l i ,n/n G ,B n=1 /B 0 ) exhibit changes in aggregate as a disruption is approached on one ormore of these tokamaks. However, for each machine, the most useful parameters,as well as the details of their precursor behaviors, are markedly different. When the prediction problem is framed using a binary classification scheme to discriminate between time slices "close to disruption" and "far from disruption," it is found that the prediction algorithms differ substantially in performance among the three machines ona time slice-by-time slice basis, but have similar disruption detection rates (~80-90%) on a shot-by-shot basis after appropriate optimisation. This could have important implications for disruption prediction and avoidance on ITER, for which developmentof a training database of disruptions may be infeasible. The algorithm's output is interpretable using a method that identifies the most strongly contributing inputsignals, which may have implications for avoiding disruptive scenarios. Lastly, to further support its real-time capability, successful applications in inter-shot and real-time environments on EAST and DIII-D are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

A TARGETED SEARCH FOR POINT SOURCES OF EeV NEUTRONS

A flux of neutrons from an astrophysical source in the Galaxy can be detected in the Pierre Auger Observatory as an excess of cosmic-ray air showers arriving from the direction of the source. To avoid the statistical penalty for making many trials, classes of objects are tested in combinations as nine ''target sets'', in addition to the search for a neutron flux from the Galactic center or from the Galactic plane. Within a target set, each candidate source is weighted in proportion to its electromagnetic flux, its exposure to the Auger Observatory, and its flux attenuation factor due to neutron decay. These searches do not find evidence for a neutron flux from any class of candidate sources. Tabulated results give the combined p-value for each class, with and without the weights, and also the flux upper limit for the most significant candidate source within each class. These limits on fluxes of neutrons significantly constrain models of EeV proton emission from non-transient discrete sources in the Galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Characterizing Canopy Openness in Open Forests: Spherical Densiometer and Canopy Photography Are Equivalent but Less Sensitive than Direct Measurements of Solar Radiation

In forest ecosystems, canopy openness affects understory light availability, plant growth, and tree species recruitment, thus shaping future forest composition, structure, and functional diversity. Foresters must correctly and quickly measure canopy openness to meet their management objectives. To help guide the selection of an appropriate method for measuring canopy openness, we compared three common techniques that vary in cost, complexity, and time required for measurements and data processing: smartphone-based hemispherical photography, spherical densiometer measurements, and direct measurements of solar radiation (using AccuPAR ceptometer). We measured canopy openness using these three methods on 28 permanent forest health monitoring plots in pine-oak forests of the Central Pine Barrens of Long Island in New York State. By analysis of variance and regression analyses, we found the three methods (particularly densiometer and hemispherical photographs) yielded broadly equivalent and strongly positively correlated descriptions of canopy openness. The direct measurements of solar radiation seemed to have a greater potential to detect subtle variation in forest understory light. Forest managers may sufficiently characterize canopy openness using quick and cheap methods (e.g., spherical densiometers) and avoid larger costs of devices for direct light measurements (e.g., ceptometers) and the larger data processing times of hemispherical photography.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

TU-FG-201-07: Development of SRS Conical Collimator Collision Prediction Software for Radiation Treatment Safety

Purpose: Stereotactic radiosurgery (SRS) treatments using conical collimators can potentially result in gantry collision with treatment table due to limited collision-clear spaces. An in-house software was developed to help the SRS treatment planner mitigate potential SRS conical collimator (Varian Medical System, Palo Alto, CA) collisions with the treatment table. This software was designed to remove treatment re-planning secondary to unexpected collisions. Methods: A BrainLAB SRS ICT Frameless Extension used for SRS treatments in our clinic was mathematically modelled using surface points registered to the 3D co-ordinate space of the couch extension. The surface points are transformed based on the treatment isocenter point and potential collisions are determined in 3D space for couch and gantry angle combinations. The distance between the SRS conical collimators and LINAC isocenter is known. The collision detection model was programmed in MATLAB (Mathwork, Natick, MA) to display graphical plots of the calculations, and the plotted data is used to avoid the gantry and couch angle combinations that would likely result in a collision. We have utilized the cone collision tool for 23 SRS cone treatment plans (8 retrospective and 15 prospective for 10 patients). Results: Twenty one plans strongly agreed with the software tool prediction for collision. However, in two plans, a collision was observed with a 0.5 cm margin when the software predicted no collision. Therefore, additional margins were added to the clearance criteria in the program to achieve a lower risk of actual collisions. Conclusion: Our in-house developed collision check software successfully avoided SRS cone re-planning by 91.3% due to a reduction in cone collisions with the treatment table. Future developments to our software will include a CT image data set based collision prediction model as well as a beam angle optimization tool to avoid normal critical tissues as well as previously treated lesions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

A Hard X-ray Study of a Manganese-Terpyridine Dimer Catalyst in a Chromium-based Metal Organic Framework - Oral Presentation [Slides]

Cleaner forms of energy are needed, and H 2 produced from water splitting is a possible source. However, a robust catalyst is necessary to carry out the water oxidation reaction. Plants utilize Photosystem II to catalyze water oxidation as a part of photosynthesis, and many synthetic water oxidation catalysts use Photosystem II as a model. In this study, the catalyst of interest was [(terpy)Mn(μ-O)2Mn(terpy)]3+ (MnTD), which was synthesized in a chromium-based Metal Organic Framework (MOF) to avoid degradation of MnTD molecules. Hard X-ray powder diffraction was the primary method of analysis. The diffraction data was used to detect the presence of MOF in samples at different catalytic stages, and lattice parameters were assigned to the samples containing MOF. Fourier maps were constructed to determine the contents of the MOF as preliminary studies suggested that MnTD may not be present. Results showed that MOF is present before catalysis occurs, but disappears in the initial stages of catalysis. Changes in the MOF’s lattice parameters suggest attractive interactions between the MOF and catalyst; these interactions may lead to the observed MOF degradation. Fourier maps also reveal limited, if any, amounts of MnTD in the system. Molecular manganese oxide may be the source of the high rate of water oxidation catalysis in the studied system.

08 HYDROGEN↗
NASA NTRS2001

Facility Concepts for Mars Returned Sample Handling

Samples returned from Mars must be held in quarantine until their biological safety has been determined. A significant challenge, unique to NASA's needs, is how to contain the samples (to protect the blaspheme) while simultaneously protecting their pristine nature. This paper presents a comparative analysis of several quarantine facility concepts for handling and analyzing these samples. The considerations in this design analysis include: modes of manipulation; capability for destructive as well as non-destructive testing; avoidance of cross-contamination; linear versus recursive processing; and sample storage and retrieval within a closed system. The ability to rigorously contain biologically hazardous materials has been amply demonstrated by facilities that meet the specifications of the Center for Disease Control Biosafety Level 4. The newly defined Planetary Protection Level Alpha must provide comparable containment while assuring that the samples remain pristine; the latter requirement is based on the need to avoid compromising science analyses by instrumentation of the highest possible sensitivity (among other things this will assure that there is no false positive detection of organisms or organic molecules - a situation that would delay or prevent the release of the samples from quarantine). Protection of the samples against contamination by terrestrial organisms and organic molecules makes a considerable impact upon the sample handling facility. The use of glove boxes appears to be impractical because of their tendency to leak and to surges. As a result, a returned sample quarantine facility must consider the use of automation and remote manipulation to carry out the various functions of sample handling and transfer within the system. The problem of maintaining sensitive and bulky instrumentation under the constraints of simultaneous sample containment and contamination protection also places demands on the architectural configuration of the facility that houses it.

Cohen, Marc M.↗
NASA NTRS2011

Development of a Real-Time Pulse Processing Algorithm for TES-Based X-Ray Microcalorimeters

We report here a real-time pulse processing algorithm for superconducting transition-edge sensor (TES) based x-ray microcalorimeters. TES-based. microca1orimeters offer ultra-high energy resolutions, but the small volume of each pixel requires that large arrays of identical microcalorimeter pixe1s be built to achieve sufficient detection efficiency. That in turn requires as much pulse processing as possible must be performed at the front end of readout electronics to avoid transferring large amounts of data to a host computer for post-processing. Therefore, a real-time pulse processing algorithm that not only can be implemented in the readout electronics but also achieve satisfactory energy resolutions is desired. We have developed an algorithm that can be easily implemented. in hardware. We then tested the algorithm offline using several data sets acquired with an 8 x 8 Goddard TES x-ray calorimeter array and 2x16 NIST time-division SQUID multiplexer. We obtained an average energy resolution of close to 3.0 eV at 6 keV for the multiplexed pixels while preserving over 99% of the events in the data sets.

Tan, Hui↗
NASA NTRS2017

Forest Carbon Emissions from Cropland Expansion in the Brazilian Cerrado Biome

Land use, land use change, and forestry accounted for two-thirds of Brazil's greenhouse gas emissions profile in 2005. Amazon deforestation has declined by more than 80% over the past decade, yet Brazil's forests extend beyond the Amazon biome. Rapid expansion of cropland in the neighboring Cerrado biome has the potential to undermine climate mitigation efforts if emissions from dry forest and woodland conversion negate some of the benefits of avoided Amazon deforestation. Here, we used satellite data on cropland expansion, forest cover, and vegetation carbon stocks to estimate annual gross forest carbon emissions from cropland expansion in the Cerrado biome. Nearly half of the Cerrado met Brazil's definition of forest cover in 2000 (greater than or equal to 0.5 ha with greater than or equal to 10% canopy cover). In areas of established crop production, conversion of both forest and non-forest Cerrado formations for cropland declined during 2003-2013. However, forest carbon emissions from cropland expansion increased over the past decade in Matopiba, a new frontier of agricultural production that includes portions of Maranhao, Tocantins, Piau­, and Bahia states. Gross carbon emissions from cropland expansion in the Cerrado averaged 16.28 Tg C yr (exp -1) between 2003 and 2013, with forest-to-cropland conversion accounting for 29% of emissions. The fraction of forest carbon emissions from Matopiba was much higher; between 2010-2013, large-scale cropland conversion in Matopiba contributed 45% of total Cerrado forest carbon emissions. Carbon emissions from Cerrado-tocropland transitions offset 5-7% of the avoided emissions from reduced Amazon deforestation rates during 2011-2013. Comprehensive national estimates of forest carbon fluxes, including all biomes, are critical to detect cross-biome leakage within countries and achieve climate mitigation targets to reduce emissions from land use, land use change, and forestry.

remote sensing↗
DOE OSTI2020

Use of Micro-Gravity Sensors for External Fluid Level Monitoring in Waste and Nuclear Related Applications - 20315

There are a number of applications in nuclear energy and hazardous waste disposal that require monitoring of fluids under extreme environments, including high levels of temperature, pressure, toxicity and radioactivity. Many of these applications will benefit from a monitoring technique that is external and non-invasive. Currently the sensors used are invasive, must reside inside the pressurized vessels and must penetrate the vessel walls, which can create a weakness in the vessel. Additionally, instruments that are used inside such containers must be exceptionally hardened to the environment. Information Systems Laboratories (ISL) has developed an external mass (gravimetric) measuring technique for monitoring nuclear coolant in Small Modular Reactors (SMRs), which will also work for measuring fluid levels in waste tanks, that avoids the problems inherent in invasive sensors. It utilizes a COTS gravitational sensor of unprecedented accuracy, leveraged via proper sensor placement geometry, to detect fluid changes of small amplitude from an outside position, obviating the need to penetrate the vessel. The technique is called Gravisense{sup TM}. ISL has proven via simulation and experiment that this concept can be usefully applied to monitoring fluid levels in both nuclear reactors and large waste tanks. Numerical simulation algorithms were developed to calculate the gravity effect of small changes in water level, which were verified by experiments at the NIST Physical Simulator facility at the Oregon State University. The measured ultralow noise levels of the superconducting gravimeter type which utilizes a Niobium sphere suspended in a magnetic field to attain its phenomenal accuracy, demonstrated that fluid levels in SMRs can be measured at least to within 3 cm. Furthermore, the method can distinguish between a contained leak (from reactor to containment vessel) from an external leak (from reactor to outside of containment). Additionally, simulations of waste canisters that hold spent fuel rods show that the fluid level measuring accuracy can potentially do better than 1 cm accuracy by measuring from below the vessel, and judicious placement of sensors on top of large waste tanks can potentially achieve a very impressive 2 mm measurement accuracy. These encouraging results prove that the Gravisense{sup TM} technique for fluid determination can be very useful in nuclear energy generation, testing, and research, as well as in waste monitoring situations that are difficult to monitor via traditional sensing technology. We believe that the next step should be to test the technique on canisters of the type that are currently storing waste in various DOE locations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2014

Constraining the oblateness of Kepler planets

We use Kepler short-cadence light curves to constrain the oblateness of planet candidates in the Kepler sample. The transits of rapidly rotating planets that are deformed in shape will lead to distortions in the ingress and egress of their light curves. We report the first tentative detection of an oblate planet outside the solar system, measuring an oblateness of 0.22{sub −0.11}{sup +0.11} for the 18 M{sub J} mass brown dwarf Kepler 39b (KOI 423.01). We also provide constraints on the oblateness of the planets (candidates) HAT-P-7b, KOI 686.01, and KOI 197.01 to be <0.067, <0.251, and <0.186, respectively. Using the Q' values from Jupiter and Saturn, we expect tidal synchronization for the spins of HAT-P-7b, KOI 686.01, and KOI 197.01, and for their rotational oblateness signatures to be undetectable in the current data. The potentially large oblateness of KOI 423.01 (Kepler 39b) suggests that the Q' value of the brown dwarf needs to be two orders of magnitude larger than that of the solar system gas giants to avoid being tidally spun down.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2004

Evaluation of an Enhanced Bank of Kalman Filters for In-Flight Aircraft Engine Sensor Fault Diagnostics

In this paper, an approach for in-flight fault detection and isolation (FDI) of aircraft engine sensors based on a bank of Kalman filters is developed. This approach utilizes multiple Kalman filters, each of which is designed based on a specific fault hypothesis. When the propulsion system experiences a fault, only one Kalman filter with the correct hypothesis is able to maintain the nominal estimation performance. Based on this knowledge, the isolation of faults is achieved. Since the propulsion system may experience component and actuator faults as well, a sensor FDI system must be robust in terms of avoiding misclassifications of any anomalies. The proposed approach utilizes a bank of (m+1) Kalman filters where m is the number of sensors being monitored. One Kalman filter is used for the detection of component and actuator faults while each of the other m filters detects a fault in a specific sensor. With this setup, the overall robustness of the sensor FDI system to anomalies is enhanced. Moreover, numerous component fault events can be accounted for by the FDI system. The sensor FDI system is applied to a commercial aircraft engine simulation, and its performance is evaluated at multiple power settings at a cruise operating point using various fault scenarios.

Kobayashi, Takahisa↗
NASA NTRS1999

A Search for Short-Period Accreting Pulsars with BATSE

Accreting X-ray pulsar systems can be detected and monitored by the BATSE Pulsar Monitor at full sensitivity only above the Nyquist period of 2.048 s, since it uses the DISCLA data type. Systems with shorter periods than 2 s can be observed, but with a reduced sensitivity, since only the aliased power is measured. While persistent sources in the period range below that have been found by earlier spacecraft, transient systems may still be undiscovered, due to limited time coverage of the galactic plane with all-sky instruments. BATSE data with a time resolution of 31 ms (PSR single-sweep mode) has been collected for four energy channels spanning 20-50 keV , at scheduled times for particular detectors and detector combinations which view the galactic plane. The data spans Nov 1993 to present, with a typical exposure of 15000 s per day to approximately 1/8 of the plane. An accelerated FFT-based search is in progress on these data. Data are segmented into approximately 300 second intervals, barycentered for 3 possible source directions spaced by 30 degrees about the detector normal, with the time series accelerated for each of 15 steps, each spaced by 5 x 10(exp -5). To avoid loss of coherence due to system orbital velocities, FFTs are averaged over each 1/4 day interval separately. Results of this search are presented, including examples of detection of Her X-1, Cen X-3, and other pulsars.

Wilson, R. B.↗
DOE OSTI2018

Blunt Injury of the Bowel and Mesentery

Purpose of Review: Although not common, blunt bowel and mesenteric trauma requires prompt identification and intervention to avoid significant morbidity and mortality. Recent Findings: Developments in MDCT technology especially with 64 and higher slice MDCT have improved image quality for better detection and depiction of bowel and mesenteric injury. Recent reports indicate that administration of oral contrast does not increase diagnostic accuracy, allowing for more rapid door to scan time. Dual-source CT (DS-CT) ability to generate iodine maps and virtual noncontrast images has the potential to increase conspicuity of bowel perfusion abnormalities, better distinguish hypo-perfused from nonperfused bowel, and reveal bowel wall hematoma obscured by mural enhancement. Summary: This article will review the current state-of-the-art approach in using direct and indirect MDCT signs of bowel injury in an attempt to differentiate surgical from nonsurgical lesions, and discuss imaging protocols used at our institution for follow-up imaging in nonsurgical lesions. We will also demonstrate the potential utility of DS-CT in blunt bowel injury.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

Projected Changes to Hydroclimate Seasonality in the Continental United States

Abstract Future changes to the hydrological cycle are projected in a warming world, and any shifts in drought risk may prove extremely consequential for natural and human systems. In addition to long‐term moistening, drying, or warming trends, perturbations to the annual cycle of regional hydroclimate variables may also have substantial impacts. We analyze projected changes in several hydroclimate variables across the continental United States, along with shifts in the amplitude and phase of their annual cycles. We find that even in regions where no robust change in the annual mean is expected, coherent changes to the annual cycle are projected. In particular, we identify robust regional phase shifts toward earlier arrival of peak evaporation in the northern regions, and peak runoff and total soil moisture in the western regions. Changes in the amplitude of the annual cycle of total and surface soil moisture are also projected, and reflect changes to the annual cycle in surface water supply and demand. Whether changes become detectable above the background noise of internal variability depends strongly on the future scenario considered, and significant changes to the annual cycle are largely avoided in the lowest‐forcing scenario.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Accurate measurement of heteronuclear dipolar couplings by phase-alternating R-symmetry (PARS) sequences in magic angle spinning NMR spectroscopy

We report a Phase-Alternating R-Symmetry (PARS) dipolar recoupling scheme for accurate measurement of heteronuclear {sup 1}H-X (X = {sup 13}C, {sup 15}N, {sup 31}P, etc.) dipolar couplings in MAS NMR experiments. It is an improvement of conventional C- and R-symmetry type DIPSHIFT experiments where, in addition to the dipolar interaction, the {sup 1}H CSA interaction persists and thereby introduces considerable errors in the dipolar measurements. In PARS, phase-shifted RN symmetry pulse blocks applied on the {sup 1}H spins combined with π pulses applied on the X spins at the end of each RN block efficiently suppress the effect from {sup 1}H chemical shift anisotropy, while keeping the {sup 1}H-X dipolar couplings intact. Another advantage over conventional DIPSHIFT experiments, which require the signal to be detected in the form of a reduced-intensity Hahn echo, is that the series of π pulses refocuses the X chemical shift and avoids the necessity of echo formation. PARS permits determination of accurate dipolar couplings in a single experiment; it is suitable for a wide range of MAS conditions including both slow and fast MAS frequencies; and it assures dipolar truncation from the remote protons. The performance of PARS is tested on two model systems, [{sup 15}N]-N-acetyl-valine and [U-{sup 13}C,{sup 15}N]-N-formyl-Met-Leu-Phe tripeptide. The application of PARS for site-resolved measurement of accurate {sup 1}H-{sup 15}N dipolar couplings in the context of 3D experiments is presented on U-{sup 13}C,{sup 15}N-enriched dynein light chain protein LC8.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

A compendium of chameleon constraints

The chameleon model is a scalar field theory with a screening mechanism that explains how a cosmologically relevant light scalar can avoid the constraints of intra-solar-system searches for fifth-forces. The chameleon is a popular dark energy candidate and also arises in f ( R ) theories of gravity. Whilst the chameleon is designed to avoid historical searches for fifth-forces it is not unobservable and much effort has gone into identifying the best observables and experiments to detect it. These results are not always presented for the same models or in the same language, a particular problem when comparing astrophysical and laboratory searches making it difficult to understand what regions of parameter space remain. Here we present combined constraints on the chameleon model from astrophysical and laboratory searches for the first time and identify the remaining windows of parameter space. We discuss the implications for cosmological chameleon searches and future small-scale probes.

79 ASTRONOMY AND ASTROPHYSICS↗