Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cost reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Integration of Thermoelectric Modules to Vapor Compression Systems

This paper describes the technology of a thermoelectric (TE) integrated heat pump. It uses a TE heat pump to subcool the refrigerant liquid before entering the evaporator to enlarge the evaporating capacity; and elevate the heat in the refrigerant flow to a supplemental heating coil and discharge the capacity to the indoor air flow. Using the DOE/ORNL Heat Pump Design Model, four system configurations were modelled on a baseline two-speed heat pump, the baseline heat pump with adding a supplemental coil, the TE integrated heat pump having one stage TE heating to control a 20R liquid refrigerant temperature drop; and having two stages TE heating to control up to 40R temperature drop. The system models were used to produce performance curves for EnergyPlus building energy simulations. We selected template residential buildings, poorly insulated: pre-1990 buildings, and well-insulated: IECC2021 buildings; in five cold climate zones: 5A, 5B, 6A, 6B, 7. The building energy simulations demonstrated energy saving potentials, utility cost reductions and estimated payback periods.

Shen, Bo↗
DOE OSTI2022

Cold Climate Integrated Heat Pump

This paper introduces development of a residential air-source integrated heat pump for cold climates (CCIHP). The heat pump is multi-functional to meet all the home comfort demands, including space cooling, space heating, domestic water heating and energy storage. The CCIHP is an ideal solution to decarbonize northern homes via providing efficient space heating and water heating to replace natural gas. It uses a three-stage compressor and a single set of heat exchangers and valves to deliver all the functions, and thus achieve cost reduction. We developed an innovative system configuration and related controls to solve typical charge unbalance in heat pumps, accelerate charge migration and smoothen mode transition in integrated heat pumps. Laboratory investigations were conducted for individual modes and verified the control functions. Laboratory tests demonstrated that the unit delivered outstanding performance. It achieved 17.0 SEER (seasonal cooling energy efficiency rating) and 11.0 HSPF (heating seasonal performance factor). In the most efficient mode (combined space cooling and water heating mode), the unit reached a total energy efficiency of 35.0 EER and required only 25 minutes to heat a 50-gallon tank of water. The CCIHP can heat 1.7 GPM water from 58 to 125°F in a direct flow-through, when the ambient temperature is above 47°F. In a dedicated water heating mode using outdoor air source, the heat pump operated down to 17°F, achieving a COP > 2.6, and heated 50-gallon water within 1 hour.

Shen, Bo↗
DOE OSTI2022

Remote Epitaxy of III-V Solar Cells via Hydride Vapor Phase Epitaxy

The promise of remote epitaxy, in which epitaxial registry of a film can still be maintained through two-dimensional layers, has emerged from an advanced understanding of the interactions between two dimensional materials and bulk semiconductors. A promising application of this technology is to facilitate substrate reuse in epitaxial III-V systems, which could significantly reduce material cost and improve commercial viability of this high-efficiency photovoltaic technology. In this process the weak van der Waal bonds between the 2D layer and the III-V substrate make separation of epitaxially-grown layers simple and leaves a smooth substrate that can be reused for cost reduction. Here we present a study of growth parameters of GaAs on AlGaAs through a low dimensional carbon interlayer via hydride vapor phase epitaxy (HVPE). We Investigate the effect of various GaAs nucleation conditions such as V/III ratio, temperature and growth rate on film roughness, crystallinity, and degree of epitaxial alignment. We demonstrate growth of single crystal GaAs layer on top of the low dimensional carbon that follow the crystal orientation of the substrate. Surface roughness measured via AFM found that lower V/III ratios result in smoother III-V films grown on the low dimensional carbon, with a lowest RMS of ~60 nm obtained at a V/III ratio of 5. Growth temperatures are optimized at 650 C, as temperatures below 550 C show non-crystalline growth and higher temperature samples display very rough surfaces. Additionally, we investigate HVPE growth on various forms of low-dimensional carbon including transferred graphene, CVD-grown graphene, and MOCVD-growth amorphous carbon and find the latter to be most well suited for III-V growth as this method results in cleaner interface and potential for direct, large-area coverage. We also identify techniques to mitigate surface degradation in carbon layers as a function of both exposure time and growth environment by analyzing surface changes via x-ray reflectivity. We show growth of heteroepitaxial III-V solar cells on carbon interlayers and preliminary cell results, which are currently limited to 4% efficiency under one sun.

AlGaAs↗
DOE OSTI2022

Renewable-Storage Hybrids in a Decarbonized Electricity Supply

We explore the potential impacts of growing industry interest in hybrid systems comprising PV and battery technologies on the results and findings of the Solar Futures Study (2021). Through comparison of Solar Futures Study scenarios with and without PV-battery hybrid configurations enabled (in the same grid planning model), we find that the highest net-value hybrid configuration depends strongly on power sector carbon policy, which increases the value of more forward-looking designs. While the availability of PV-battery hybrid configurations primarily displaces standalone PV and battery capacity, we find that it (a) increases solar's share of total capacity and generation and (b) reduces required transmission expansion and associated costs under scenarios that combine aggressive cost reductions and power sector decarbonization policy. Results will also be presented for the complementarity and economic value of wind-PV hybrids with varying amounts of energy storage.

complementarity↗
DOE OSTI2022

TEA and LCA Assessments of H2 Production from Coal, Coal/Biomass, and Biomass

This presentation was made at the "Gasification Technology Status and Pathways for Net-Zero Carbon Economy Workshop" held on November 30, 2022. The presentation primarily focuses on TEA/LCA results that NETL has developed for coal gasification w/ & w/o CCS as well as net-zero greenhouse gas coal/biomass gasification. Full reporting of these cases is publicly available in the NETL report titled "Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies," April 2022. Additionally, the presentation describes current NETL work in support of the U.S. Department of Energy (DOE) Office of Fossil Energy and Carbon Management (FECM) Gasification Program in the areas of TEA/LCA/Markets analysis of biomass/MSW/waste plastics gasification to achieve cost reductions for net-zero H2 production.

Lewis, Eric↗
DOE OSTI2022

Invertible Neural Networks for Aerodynamic Design of Wind Turbine Blades

The state-of-the-practice methods for aerodynamic design of wind turbine blads use linearized blade element momentum theory (BEM) to optimize the twist and chord profiles from a pre-selected set of 2D airfoil shapes. In this work, we apply invertible neural network (INN) tools to enable the rapid inverse aerodynamic design of wind turbine blades including component airfoils. The INN is trained on data obtained through the use of robust automated mesh generation and the HAMSTR computational fluid dynamics solver with advanced turbulence and transition models validated for turbine applications. Our design technique is a significant improvement over the state-of-the-practice linearized blade element momentum (BEM) techniques in capturing 3D nonlinear aerodynamic effects that are critical for optimal design of the rotors. This is made possible by developing sparse, invertible neural networks (INNs) for inverse design and optimization that realize a 100x cost reduction compared to adjoint-based computational fluid dynamics (CFD) approaches, while enabling increased robustness of the final design. We demonstrate the INN tool for design of a section of the NREL 5-MW blade. All generated shapes satisfy the desired aerodynamic characteristics, demonstrating the success of the INN approach for inverse design of wind turbine blades.

aerodynamic design↗
DOE OSTI2022

Powering America’s Non-Powered Dams, One Byte at a Time

Compared with other hydropower development opportunities, powering underutilized water infrastructure provides an attractive option for expanding clean energy in the 21st century. Research conducted by the U.S. Department of Energy’s (DOE) Oak Ridge National Laboratory (ORNL) targets hydropower development at non-powered dams (NPD) from several angles and is increasingly looking to new and improved data sources to inform decision-making. Sponsored by the DOE Water Power Technologies Office (WPTO), ORNL’s latest efforts build on a decade of work to advance understanding and data access for improved decision-making. Outcomes of the most recent research are geared toward better informing NPD stakeholders across a wide spectrum of interests. Furthermore, these outcomes are paving the way for additional federal investments to power NPDs in the U.S., including investments in innovative new technologies that incorporate ecological and social objectives while achieving cost reductions, commercialization and deployment. Here, this research centers around improving the breadth and accessibility of NPD data. These new digital information tools and associated tools can lead to a better decision-making process and support new hydropower development, helping to power America’s NPDs, one “byte” at a time.

13 HYDRO ENERGY↗
DOE OSTI2023

Cold Climate Integrated Heat Pump with Energy Storage for Grid-Responsive Control

An air-source integrated heat pump (ASIHP) is a multifunctional unit, capable of space cooling, space heating, and water heating. We developed a packaged cold climate ASIHP, using a multi-stage compressor, capable of working down to -25°C, and providing 100% rated capacity down to -15°C with a heating COP > 2.2. An innovative system configuration and related controls were developed to solve charge balance in the integrated heat pump, smooth charge migration, and mode transition among multiple working modes. Extensive laboratory investigations for individual modes were performed to verify the performance. Its integrated heating capability provides speedy water heating to meet domestic hot water use and store heating energy in a phase change material ceiling/panel. The heating energy storage can be used to shift the load when the electricity price is high. Based on the performance data and a calibrated model from the laboratory testing, we conducted building energy simulations driven by a model predictive control, using EnergyPlus in one U.S. cold climate zone to investigate the grid-responsive control strategy and estimate the utility cost reduction potential.

Shen, Bo↗
DOE OSTI2023

Multi-level inverter with mixed device types

Provided is a novel multi-level inverter with mixed device types and methods of controlling same. This novel multi-level inverter topology and control method allows the use of high frequency switching devices for controlled PWM switching, while also using lower frequency switching devices for directional switches. This combination of high frequency PWM switching devices with low frequency directional switching devices allows a cost reduction without a significant performance degradation.

Mekonnen, Ezana T.↗
DOE OSTI2023

Surface Properties and RF Performance of Vapor Diffused Nb3Sn on NB After Sequential Anneals Below 1000°C

Nb3Sn is a next-generation superconducting material that can be used for future superconducting radiofrequency (SRF) accelerator cavities, promising better performance, cost reduction, and higher operating temperature than Nb. The Sn vapor diffusion method is currently the most preferred and successful technique to coat niobium cavi-ties with Nb3Sn. Among post-coating treatments to opti-mize the coating quality, higher temperature annealing without Sn is known to degrade Nb3Sn because of Sn loss. We have investigated Nb3Sn/Nb samples briefly annealed at 800-1000°C for 10 and 20 minutes to poten-tially improve the surface to enhance the performance of Nb3Sn-coated cavities. Following the sample studies, a coated single-cell cavity was sequentially annealed at 900°C and tested its performance each time, improving the cavity's quality factor relatively. This paper summarizes the sample studies and discusses the RF test results from sequentially annealed SRF Nb3Sn/Nb cavity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Heat pumps in the United States: Market potentials, challenges and opportunities, technology advances

The US heat pump market has been affected by the socioeconomic impacts of the COVID-19 pandemic. However, the Biden administration’s goal of net-zero greenhouse gas emissions by 2050 through electrification and clean energy technologies is accelerating the research, development, and deployment of heat pumps in the United States for improved energy performance, reduced greenhouse gas emissions, and wider adoption. The US heat pump market has experienced steady growth since 2010. In 2020, heat pumps surpassed gas furnace shipments for the first time, and the trend maintains through 2022. The current priority is to improve the affordability of energy and equitable access to heat pump technologies through cost reductions and further accelerate this trend. In addition, current R&D includes emphases on alternative refrigeration technology and lower–global warming potential refrigerants to reduce direct emissions. Heat pump market share is expected to grow as regulatory policies and financial incentives steer the building sector toward decarbonization. This paper reviews policies and market trends, discusses the challenges and opportunities in the current policy landscape, and reviews current research in the United States.

Malhotra, Mini↗
DOE OSTI2023

Power packet networks for wave energy converter arrays

One of the biggest challenges for all renewable energy sources (RES) is that they are variable power generators which will require reactive power or energy storage systems (ESS) to provide reliable power quality (ideally power factor of one) at the power grid generation side. The present invention is directed to a power packet network (PPN) for integrating wave energy converter (WEC) arrays into microgrids. Specifically, an array of WECs can be physically positioned such that the incoming regular waves will produce an output emulating an N-phase AC system such that the PPN output power is constant. ESS requirements are thereby minimized whilst maintaining grid stability with high power quality. This will enable RES integration onto a future smart grid for large-scale adoption and cost reduction while preserving high efficiency, reliability, and resiliency.

Wilson, David G.↗
DOE OSTI2023

Multi-level inverter with mixed device types

Provided is a novel multi-level inverter with mixed device types and methods of controlling same. This novel multi-level inverter topology and control method allows the use of high frequency switching devices for controlled PWM switching, while also using lower frequency switching devices for directional switches. This combination of high frequency PWM switching devices with low frequency directional switching devices allows a cost reduction without a significant performance degradation.

Mekonnen, Ezana T.↗
DOE OSTI2024

Empirical Validation of UBEM: An Assessment of Bias in Urban Building Energy Modeling for Chicago

Residential and commercial buildings currently account for 30% of total global final energy consumption. Urban-scale building energy modeling (UBEM) can enable scalable investments and unlock building improvements by quantifying energy, demand, emissions, and cost reductions of specific measures or packages for building-specific technologies in large geographic regions. While the sophistication of UBEM data sources and technologies have increased dramatically in the past decade, there remains a knowledge gap for empirical validation and sources of bias between building-specific energy models and measured data at varying geographic scales.As UBEM continues to develop, systemic analysis of accuracy, bias, and limitations of the resulting models is necessary to inform best practices and move toward standardization. These are characterized for the Automatic Building Energy Modeling (AutoBEM) software suite with an initial case study involving metered electricity consumption data from 247,188 buildings in Chicago, Illinois, USA - averaged across years 2019-2021 - compared to the following datasets: (1) the AutoBEM-generated nation-scale Model America version 2 (MAv2) data for 596,064 buildings, (2) tax assessor data for 579,829 buildings, (3) tax assessor data filled with MAv2, and (4) 102 representative dynamic archetypes. The accuracy is reported for every building type and vintage combination, along with multiple sources of bias for unique building descriptors. The AutoBEM simulation workflow produced energy consumption estimates that closely match aggregated metered electricity consumption data for different types of buildings constructed during various time periods at the city scale - with initial normalized mean bias error of 10.9%, and 1.1% after removing outliers. Contribution of statistically significant factors including building type, land use, age, and size to variance in UBEM bias is quantified.

Garg, Ankur↗
DOE OSTI2024

Validation of Local Structural Loads Computed by OpenFAST Against Measurements From the Focal Experimental Campaign: Preprint

This work presents the validation of the local structural load modeling capability in OpenFAST for floating substructures based on data from the FOCAL experimental campaign. Previously, OpenFAST could only represent the floating substructure as a rigid body, and though this approach can model the global response of the floater in most cases, it is not able to capture the structural loads within its individual members. Consideration of local substructure loads is important for some floating designs, as the pursuit of cost reduction often results in lighter and more flexible structures. To address this limitation, the HydroDyn (hydrodynamics) and SubDyn (substructure dynamics) modules of OpenFAST have been recently extended to account for the flexibility of floating substructures. To validate this new capability, we compare the results obtained by OpenFAST with data measured during the FOCAL experimental campaign, which analyzed a 1:70 scale performance-matched model of the IEA 15-MW reference turbine atop a modified University of Maine VolturnUS-S semisubmersible in a wave basin under the action of both wind and waves. For the purposes of the present work, the most important feature of the experiment is the presence of load cells at the root of each pontoon, and our objective is to assess how well those loads are reproduced by OpenFAST. To model the distributed hydrodynamic and hydrostatic loads along the floating substructure, we adopt a strip-theory approach based on the Morison equation, and we discuss the impact of different hydrodynamic modeling options (wave stretching, MacCamy-Fuchs correction, and second-order wave kinematics) on both motions and loads. For simplicity, we focus on wave-only conditions, both regular and irregular. The results demonstrate good overall agreement for the loads at the root of the pontoons for the waves analyzed in this work, especially given the assumptions and simplifications inherent to a simple strip-theory model.

floating offshore wind turbine↗
DOE OSTI2024

Multifunctional Heat Pump with Energy Storage Capability

Replacing gas furnaces with heat pumps on a large scale can pose challenges to the electrical grid. It will significantly increase the demand, strain the electrical grid, especially during peak usage times. To ensure that heat pumps contribute to reducing emissions, it's essential to increase the share of renewable energy in the grid. However, the supply of renewable energy is unstable. Large scale of electrification must address the concern of grid resilience to meet necessary heating/cooling demands and shift peak electric load. All these require future heat pumps having energy storage capability. These systems can store excess energy during low-demand periods and release it during high-demand periods, reducing stress on the grid. This paper will introduce an innovative configuration, control, and laboratory investigations of a multifunctional packaged heat pump. In addition to the original indoor and outdoor air coils, the heat pump has a parallel hydronic loop with a brazed plate heat exchanger (BHP). The hydronic loop circulates hot/chilled water to store heating/cooling energy in phase change material (PCM). It is capable of space cooling, space heating, cooling energy storage/defrosting, water heating/heating energy storage with outdoor air source or indoor air source, and cooling/heating energy free discharge. The laboratory studies and breadboard unit are presented. Additionally, building energy simulation demonstrates utility cost reduction potential via charging PCM panels/ceilings during off-peak hours and releasing the energy during peak hours to mitigate the peak power consumption.

Shen, Bo↗
DOE OSTI2024

Residential Integrated Heat Pump to Meet All the Home Comfort Needs

This paper will introduce development and field trial of a residential air-source integrated heat pump for cold climates. The heat pump is multi-functional to meet all the home comfort demands, including space cooling, space heating, domestic water heating. The integrated heat pump is an ideal solution to decarbonize northern homes via providing efficient space heating and water heating to replace natural gas. It uses a three-stage compressor and a single set of heat exchangers and valves to deliver all the functions, and thus achieve cost reduction. We developed an innovative system configuration and related controls to solve typical charge unbalance, accelerate charge migration and smoothen mode transition in integrated heat pumps. Laboratory investigations were conducted for individual modes and verified the control functions. Laboratory tests demonstrated that the unit delivered outstanding performance. It achieved 17.0 SEER (seasonal cooling energy efficiency rating) and 11.0 HSPF (heating seasonal performance factor). In the most efficient mode (combined space cooling and water heating mode), the unit reached a total energy efficiency > 30.0 EER and required only 25 minutes to heat a 50-gallon tank of water. One heat pump prototype is going through a field trial since April, 2023 in Syracuse, New York. The one-year field test results are summarized.

Shen, Bo↗