Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computational materials design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Semi-empirical quantum optics for mid-infrared molecular nanophotonics

Nanoscale infrared (IR) resonators with sub-diffraction limited mode volumes and open geometries have emerged as new platforms for implementing cavity quantum electrodynamics at room temperature. The use of IR nanoantennas and tip nanoprobes to study strong light–matter coupling of molecular vibrations with the vacuum field can be exploited for IR quantum control with nanometer spatial and femtosecond temporal resolution. In order to advance the development of molecule-based quantum nanophotonics in the mid-IR, we propose a generally applicable semi-empirical methodology based on quantum optics to describe light–matter interaction in systems driven by mid-IR femtosecond laser pulses. The theory is shown to reproduce recent experiments on the acceleration of the vibrational relaxation rate in infrared nanostructures. It also provides physical insights on the implementation of coherent phase rotations of the near-field using broadband nanotips. We then apply the quantum framework to develop general tip-design rules for the experimental manipulation of vibrational strong coupling and Fano interference effects in open infrared resonators. We finally propose the possibility of transferring the natural anharmonicity of molecular vibrational levels to the resonator near-field in the weak coupling regime to implement intensity-dependent phase shifts of the coupled system response with strong pulses and develop a vibrational chirping model to understand the effect. The semi-empirical quantum theory is equivalent to first-principles techniques based on Maxwell’s equations, but its lower computational cost suggests its use as a rapid design tool for the development of strongly coupled infrared nanophotonic hardware for applications ranging from quantum control of materials to quantum information processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

First-principles calculations of defects and electron–phonon interactions: Seminal contributions of Audrius Alkauskas to the understanding of recombination processes

First-principles calculations of defects and electron–phonon interactions play a critical role in the design and optimization of materials for electronic and optoelectronic devices. The late Audrius Alkauskas made seminal contributions to developing rigorous first-principles methodologies for the computation of defects and electron–phonon interactions, especially in the context of understanding the fundamental mechanisms of carrier recombination in semiconductors. Alkauskas was also a pioneer in the field of quantum defects, helping to build a first-principles understanding of the prototype nitrogen-vacancy center in diamond, as well as identifying novel defects. Here, we describe the important contributions made by Alkauskas and his collaborators and outline fruitful research directions that Alkauskas would have been keen to pursue. Audrius Alkauskas’ scientific achievements and insights highlighted in this article will inspire and guide future developments and advances in the field.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Development of Conceptual Lead Cartridge Design to Perform Irradiation Experiments in VTR

This paper seeks to introduce the latest design of the Extended Length Test Assembly–Cartridge Lead (ELTA-CL) with associated thermal-hydraulic (TH) assessment and related experiment activities to support the critical component development performed by the ELTA-CL team (Los Alamos National Laboratory, Westinghouse Electric Company, and the University of New Mexico). The goal of the ELTA-CL program is to develop and validate an experimental capability to perform irradiation experiments in the Versatile Test Reactor (VTR) addressing Lead Fast Reactor (LFR) technology gaps, in support of the commercial development of advanced lead-cooled fast reactor concepts. Through a design maturation process and parametric study, a conceptual design is proposed to meet the requirements for material and corrosion testing. Thermal-hydraulic characteristics for the conceptual design at desired operating conditions are assessed with systems-level (one-dimensional) and computational fluid dynamics (three-dimensional) simulations. Along with the conceptual design work, experimental activities for the development of critical components such as the pump and flowmeter are undertaken. From both the modeling study and the experimental results, the design requirements of the Phase 1 ELTA-CL (e.g., 500°C and 2 m/s) are achievable with the current conceptual design. Additional design improvements and safety assessments at both steady-state and transient conditions for the final ELTA-CL design will be pursued.

42 ENGINEERING↗
DOE OSTI2024

Detailed Structural and Chemical Analysis of Amorphous Compounds in Superconducting Qubit Systems

With massive improvements in device coherence times and gate fidelity over the past two decades, superconducting quantum devices have emerged as a leading technology platform for next generation quantum computing. While many of these improvements have been driven through optimized device designs and geometries, the presence of defects, impurities, interfaces, and surfaces in the constituent materials continue to limit performance and present a critical barrier in achieving scalable quantum systems with long coherence times. As part of the Superconducting Quantum Materials and Systems (SQMS) center, we have applied state-of-the-art materials characterization techniques, such as scanning/transmission electron microscopy, secondary ion mass spectrometry, and atom probe tomography, to identify structural defects and chemical inhomogeneities in superconducting qubits. In this review, we discuss the findings of these efforts as they relate to the inherent surfaces, interfaces, impurities, and defects in superconducting qubits. Through this comprehensive investigation, we provide insight into possible sources of dissipation in these systems. Further, we supplement these findings with potential strategies for mitigating these undesired features in an effort to systematically and intelligently improve the coherence times of superconducting qubits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Highly Permeable Rubbery Thin Film Composite Membranes for CO2 Capture from Steel Mills

For presentation at the 2024 AIChE Annual Meeting, San Diego, CA, October 27-31, 2024. High-permeance and CO2-selective membranes are needed to make membrane technology economically viable for large-scale deployment of carbon capture from various industrial point sources such as steel mills. Thin film composite (TFC) membranes are necessary for this practical implementation because they can provide high permeance by forming a thin selective layer on top of a porous support layer. This presentation reports the rational design and fabrication of National Energy Technology Laboratory’s highly permeable non-aging TFC membranes achieved by: (1) synthesizing a high-performance rubbery selective material; (2) developing a high-porosity membrane support; (3) optimizing coating methods to assemble the two materials into scalable membranes; and (4) scaling up membrane supports and TFCs via a roll-to-roll process. This talk will also cover the design, computational fluid dynamic simulation, 3D printing, construction, and permeation testing of plate-and-frame membrane modules for an upcoming field demonstration at U. S. Steel’s Edgar Thomson Plant in Braddock, PA.

Zhu, Lingxiang↗
NASA NTRS1973

Isogrid design handbook

Handbook has been published which presents information needed for design of isogrid triangular integral-stiffened structures. It develops equations, methods, and graphs to handle wide variety of loadings, materials, and geometry. Handbook is divided into seven sections. Handbook may be used by marine and civil engineers and by students and designers without access to computers.

Meyer, R. R.↗
NASA NTRS1980

Photomask and pattern programs

Package of computer programs helps designers with layout and graphics of photomasks. Photomasks are specifically useful to applications involving fine reproducibility, repetition, and fabrication on planar surfaces of materials, items fabricated from photomasks include circuit boards, magnetic bubble devices and integrated optic circuits.

Kirschman, R. K.↗
NASA NTRS1987

Civil propulsion technology for the next twenty-five years

The next twenty-five years will see major advances in civil propulsion technology that will result in completely new aircraft systems for domestic, international, commuter and high-speed transports. These aircraft will include advanced aerodynamic, structural, and avionic technologies resulting in major new system capabilities and economic improvements. Propulsion technologies will include high-speed turboprops in the near term, very high bypass ratio turbofans, high efficiency small engines and advanced cycles utilizing high temperature materials for high-speed propulsion. Key fundamental enabling technologies include increased temperature capability and advanced design methods. Increased temperature capability will be based on improved composite materials such as metal matrix, intermetallics, ceramics, and carbon/carbon as well as advanced heat transfer techniques. Advanced design methods will make use of advances in internal computational fluid mechanics, reacting flow computation, computational structural mechanics and computational chemistry. The combination of advanced enabling technologies, new propulsion concepts and advanced control approaches will provide major improvements in civil aircraft.

Rosen, Robert↗
NASA NTRS1985

Elevated temperature crack growth

The purpose is to determine the ability of currently available P-I integrals to correlate fatigue crack propagation under conditions that simulate the turbojet engine combustor liner environment. The utility of advanced fracture mechanics measurements will also be evaluated during the course of the program. To date, an appropriate specimen design, a crack displacement measurement method, and boundary condition simulation in the computational model of the specimen were achieved. Alloy 718 was selected as an analog material based on its ability to simulate high temperature behavior at lower temperatures. Tensile and cyclic tests were run at several strain rates so that an appropriate constitutive model could be developed. Suitable P-I integrals were programmed into a finite element post-processor for eventual comparison with experimental data.

Malik, S. N.↗
NASA NTRS1991

A theoretical comparison of the near-optimum design and predicted performance of n/p and p/n indium phosphide homojunction solar cells

Using a detailed simulation model of p(+)nn(+) and n(+)pp(+) indium phosphide (InP) homojunction solar cells, extensive parametric variation computer simulation runs were performed to aid in making near-optimum designs for these two solar cell configurations. The values of all the geometrical and material parameters corresponding to the near-optimal designs of both these configurations are presented. The results of parametric variation runs are presented for each configuration showing how the performance parameters J(sub sc), V(sub oc), and eta vary with each of the cell design parameters for the near-optimally designed cell. Finally, the theoretically obtained results are discussed, and the relative merits and drawbacks of the two configurations are compared.

Goradia, Chandra↗
NASA NTRS1993

Stardust - Aggregation of cosmic dust analogues in microgravity

The condensation behavior of refractory grains near stars was investigated in an experiment which used a specially designed apparatus flown aboard NASA's Reduced Gravity aircraft. The apparatus consisted of a furnace in which a solid material (Zn or Mg) is vaporized into a temperature- and pressure-controlled chamber. Light scattered from the grains was recorded using a video system, and temperature measurements in the chamber were recorded throughout the microgravity period. The video and the temperature data are compared to models that predict the time dependence of the temperature- and vapor-pressure profiles to deduce the condensation behavior of the material. The joint U.S.-Italian program (named Stardust) for these experiments, designed to study refractory grain formation and aggregation, was set up to develop experimental and computational techniques for condensation studies under microgravity conditions.

Dell'aversana, P.↗
NASA NTRS1993

Multilayer mirrors and filters for imaging the earth's inner magnetosphere

The requirements for imaging the inner magnetosphere in the light of 304-A He(+) emission are examined. The expected EUV emission spectrum of the inner magnetosphere is used to establish guidelines for the performance of the imager's multilayer mirrors and filters. The design of multilayer mirrors and the results of a computer search that determines the best multilayer mirror design for this application are discussed. B4C, Be, Si, and SiC are identified as promising top-layer materials for a multilayer 304-A mirror, while Al, Mg, and Mg2Si are recommended for other layers. Si-passivated Te and a combination of Al or Si with B or C are promising filter materials for this application.

Schulze, Dean W.↗
NASA NTRS2010

Boundary Layer Protuberance Simulations in Channel Nozzle Arc-Jet

Two protuberance designs were modeled in the channel nozzle of the NASA Johnson Space Center Atmospheric Reentry Materials and Structures Facility with the Data-Parallel Line Relaxation computational fluid dynamics code. The heating on the protuberance was compared to nominal baseline heating at a single fixed arc-jet condition in order to obtain heating augmentation factors for flight traceability in the Boundary Layer Transition Flight Experiment on Space Shuttle Orbiter flights STS-119 and STS-128. The arc-jet simulations were performed in conjunction with the actual ground tests performed on the protuberances. The arc-jet simulations included non-uniform inflow conditions based on the current best practices methodology and used variable enthalpy and constant mass flow rate across the throat. Channel walls were modeled as fully catalytic isothermal surfaces, while the test section (consisting of Reaction Cured Glass tiles) was modeled as a partially catalytic radiative equilibrium wall. The results of the protuberance and baseline simulations were compared to the applicable ground test results, and the effects of the protuberance shock on the opposite channel wall were investigated.

Marichalar, J. J.↗
NASA NTRS2016

X-ray Micro-Tomography of Ablative Heat Shield Materials

X-ray micro-tomography is a non-destructive characterization technique that allows imaging of materials structures with voxel sizes in the micrometer range. This level of resolution makes the technique very attractive for imaging porous ablators used in hypersonic entry systems. Besides providing a high fidelity description of the material architecture, micro-tomography enables computations of bulk material properties and simulations of micro-scale phenomena. This presentation provides an overview of a collaborative effort between NASA Ames Research Center and Lawrence Berkeley National Laboratory, aimed at developing micro-tomography experiments and simulations for porous ablative materials. Measurements are carried using x-rays from the Advanced Light Source at Berkeley Lab on different classes of ablative materials used in NASA entry systems. Challenges, strengths and limitations of the technique for imaging materials such as lightweight carbon-phenolic systems and woven textiles are discussed. Computational tools developed to perform numerical simulations based on micro-tomography are described. These enable computations of material properties such as permeability, thermal and radiative conductivity, tortuosity and other parameters that are used in ablator response models. Finally, we present the design of environmental cells that enable imaging materials under simulated operational conditions, such as high temperature, mechanical loads and oxidizing atmospheres.Keywords: Micro-tomography, Porous media, Ablation

tomography↗
NASA NTRS1993

Nonlinear optical thin films

A focused approach to development and evaluation of organic polymer films for use in optoelectronics is presented. The issues and challenges that are addressed include: (1) material synthesis, purification, and the tailoring of the material properties; (2) deposition of uniform thin films by a variety of methods; (3) characterization of material physical properties (thermal, electrical, optical, and electro-optical); and (4) device fabrication and testing. Photonic materials, devices, and systems were identified as critical technology areas by the Department of Commerce and the Department of Defense. This approach offers strong integration of basic material issues through engineering applications by the development of materials that can be exploited as the active unit in a variety of polymeric thin film devices. Improved materials were developed with unprecedented purity and stability. The absorptive properties can be tailored and controlled to provide significant improvement in propagation losses and nonlinear performance. Furthermore, the materials were incorporated into polymers that are highly compatible with fabrication and patterning processes for integrated optical devices and circuits. By simultaneously addressing the issues of materials development and characterization, keeping device design and fabrication in mind, many obstacles were overcome for implementation of these polymeric materials and devices into systems. We intend to considerably improve the upper use temperature, poling stability, and compatibility with silicon based devices. The principal device application that was targeted is a linear electro-optic modulation etalon. Organic polymers need to be properly designed and coupled with existing integrated circuit technology to create new photonic devices for optical communication, image processing, other laser applications such as harmonic generation, and eventually optical computing. The progression from microscopic sample to a suitable film-forming material in a working device is a complex, multifaceted endeavor. It requires close attention to maintaining the optical properties of the electro-optic active portion of the polymer while manipulating the polymer structure to obtain the desired secondary polymer properties.

Leslie, Thomas M.↗
NASA NTRS2016

Revisiting of Multiscale Static Analysis of Notched Laminates Using the Generalized Method of Cells

Composite material systems generally exhibit a range of behavior on different length scales (from constituent level to macro); therefore, a multiscale framework is beneficial for the design and engineering of these material systems. The complex nature of the observed composite failure during experiments suggests the need for a three-dimensional (3D) multiscale model to attain a reliable prediction. However, the size of a multiscale three-dimensional finite element model can become prohibitively large and computationally costly. Two-dimensional (2D) models are preferred due to computational efficiency, especially if many different configurations have to be analyzed for an in-depth damage tolerance and durability design study. In this study, various 2D and 3D multiscale analyses will be employed to conduct a detailed investigation into the tensile failure of a given multidirectional, notched carbon fiber reinforced polymer laminate. Threedimensional finite element analysis is typically considered more accurate than a 2D finite element model, as compared with experiments. Nevertheless, in the absence of adequate mesh refinement, large differences may be observed between a 2D and 3D analysis, especially for a shear-dominated layup. This observed difference has not been widely addressed in previous literature and is the main focus of this paper.

Materials Engineering↗
DOE OSTI2022

Charge transport and antiferromagnetic ordering in nitroxide radical crystals

Nonconjugated radical polymers and small molecules are employed as functional materials in organic electronic devices. Furthermore, the unpaired electrons on these materials have permanent magnetic moments, making these materials promising candidates for organic magnets. Through molecular design, strong antiferromagnetic and ferromagnetic ordering have been achieved in conjugated materials. However, the magnetic properties of nonconjugated radical polymers have only shown weak magnetic interactions among the open-shell sites due to the large mean separation between radicals in typical materials. Here, we have designed, synthesized, and crystalized two open-shell molecules that used molecular engineering to control the assembly of the open-shell sites into a strong antiferromagnetically ordered network. The strong antiferromagnetic interaction is evidenced by a high paramagnetic-to-antiferromagnetic transition temperature of ~40 K. This high transition temperature was a result of a high spin exchange coupling constant J of about –20 cm –1 , which was suggested by both experimental and computed coupling parameters given by the energy difference between high-spin and low-spin broken-symmetry structures. In addition, a single-crystal electrical conductivity of ~10 –3 S m –1 was achieved, which indicated the potential of this material in electronic applications. As a result, this work provides an insight into a design strategy for radical-based electronic and magnetic materials through proper molecular structure modifications.

36 MATERIALS SCIENCE↗