Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CoRe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Three-Dimensional Full-Core BEAVRS Using OpenMOC with Transport Equivalence

Using an optimized implementation of the three-dimensional (3D) method of characteristics for neutron transport, along with a novel equivalence method for transport calculations that was designed to correct self-shielding errors from neglecting the angular dependence of resonant group absorption, a 3D full-core light water reactor hybrid stochastic-deterministic eigenvalue calculation was achieved. This paper presents the optimizations developed and compares the transport solutions obtained. For the statepoint, run times near 10 000 CPU hours are achieved—improving on previous works by an order of magnitude—with near 1% error on pin fission to 238 U capture ratios and a few dozen pcms on the eigenvalue.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

On the stability and stationarity of the Super H-mode combined with an ion transport barrier in the core

The Super H-mode, a regime with high pedestal pressure and stored energy, is explored on DIII-D and combined with an ion transport barrier in the plasma core to increase performance. A significant improvement of ion temperatures and confinement is facilitated by favorable conditions such as high rotational shear and high ion pedestal temperatures. As a result of a rise in density and simultaneous decrease in rotation, the ion transport barrier disappears during the discharge evolution, leading to a transition from a very high confinement state at early times, to a reduced but still high confinement phase. Additionally, in many discharges, a global MHD event consistent with the coupling of a destabilized internal mode to an edge localized mode (ELM) causes a large energy loss and leads to a reorganization of the plasma into a lower temperature, higher density state. Depending on the magnitude of the global MHD event, the plasma edge collisionality can increase significantly and shift the operational boundary from the peeling to the ballooning side, which can be understood as a drop out of the Super H-mode channel into standard H-mode. Hence, in Super H-mode discharges with ion transport barriers, both the improved pedestal height and rotational shear contribute to the high stored energy. Here, at very low levels of rotation, the confinement factor for SH modes is still expected to exceed standard H-mode by 20-30 %. With their overall stationarity and high-performance levels, Super H-mode discharges provide an attractive regime for ITER and may enable a more compact design of future fusion power plants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Investigation of core transport changes in DIII-D discharges with off-axis T e profile peaks

Abstract DIII-D discharges that transition to H-mode solely with off-axis electron cyclotron heating (ECH) often exhibit strong off-axis peaking of electron temperature profiles at the heating location. Electron heat transport properties near these off-axis temperature peaks have been studied using modulated ECH. The Fourier analyzed electron temperature data have been used to infer electron thermal diffusivity. Comparisons with numerical solutions of the time-dependent electron thermal equation find that the data are consistent with a narrow region with electron diffusivity χ e an order of magnitude lower than the average value across the plasma, suggesting an electron internal transport barrier (ITB) near the ECH heating location. Detailed profile analysis and equilibrium reconstructions suggest that the formation of these ITBs are correlated with off-axis values of the safety factor q being near 1. Furthermore, the ECH driven H-mode discharges demonstrate more rapid electron heating rate near the ECH deposition location than L-mode discharges with higher auxiliary ECH heating power. Additional modeling attributes this difference to the modification of electron heat transport in the core at the L-H transition, which also sustains the off-axis electron temperature peaks.

Physics↗
DOE OSTI2024

Core inductive electric field during sawtooth crashes on DIII-D

Sawtooth crashes on tokamak plasmas exhibit relaxation much faster than resistive time scales via a mechanism not fully understood. Using core magnetic measurements from the Radial Interferometer-Polarimeter (RIP) diagnostic on the DIII-D tokamak, Grad–Shafranov equilibria constrained by internal magnetic measurements that have high time resolution (<1μs) can be computed, allowing analysis of how equilibrium parameters such as safety factor q, current density J, and parallel electric field E ∥ , particularly on-axis, evolve. At the sawtooth crash, on-axis safety factor q 0 is observed to rise by 5% but remain below 1 throughout the cycle, and on-axis current density J 0 is observed to drop by 5%. On-axis parallel electric field E ∥ (0) is found to be balanced by ηJ 0 (resistivity times on-axis current density) except during the 200 µs crash period, where E ∥ (0) reaches 22 V m –1 , exceeding ηJ 0 by a factor of more than 2000. These first measurements in tokamak plasmas verify that generalized Ohm's law is not balanced during the crash by resistive effects alone; this is a finding expected due to the relaxation being much faster than resistive timescales. As a result, measurement of the electric field during the tokamak sawtooth serves to illuminate the physical mechanisms at work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Core-excited states in 105 Cd

105 Cd was produced in the 96 Mo+ 12 C fusion/evaporation reaction, performed at NIPNE, Bucharest-Magurele, Romania. Various excited states of positive- and negative-parities were populated. Picosecond half-lives were measured by using the Differential Decay Curve Method (DDCM) method, allowing to control the side feeding of the states of interest. Further, new data were obtained for the half-lives of the 11/2 + , 15/2 - and 19/2 -105 Cd states. Reduced electric quadrupole transition strengths were calculated and compared to the neighboring odd-A and even-A cadmium nuclei. The particle-core weak coupling approach was used to interpret excited states of 105 Cd in the light of the new data.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Sensitivity of future liquid argon dark matter search experiments to core-collapse supernova neutrinos

Future liquid-argon DarkSide-20k and Argo detectors, designed for direct dark matter search, will be sensitive also to core-collapse supernova neutrinos, via coherent elastic neutrino-nucleus scattering. This interaction channel is flavor-insensitive with a high-cross section, enabling for a high-statistics neutrino detection with target masses of ~50 t and ~360 t for DarkSide-20k and Argo respectively. Thanks to the low-energy threshold of ~0.5 keVnr achievable by exploiting the ionization channel, DarkSide-20k and Argo have the potential to discover supernova bursts throughout our galaxy and up to the Small Magellanic Cloud, respectively, assuming a 11-M progenitor star. In this work, we report also on the sensitivity to the neutronization burst, whose electron neutrino flux is suppressed by oscillations when detected via charged current and elastic scattering. Finally, the accuracies in the reconstruction of the average and total neutrino energy in the different phases of the supernova burst, as well as its time profile, are also discussed, taking into account the expected background and the detector response.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The neutrino gravitational memory from a core collapse supernova: phenomenology and physics potential

General Relativity predicts that the passage of matter or radiation from an asymmetrically-emitting source should cause a permanent change in the local space-time metric. This phenomenon, called the gravitational memory effect, has never been observed, however supernova neutrinos have long been considered a promising avenue for its detection in the future. With the advent of deci-Hertz gravitational wave interferometers, observing the supernova neutrino memory will be possible, with important implications for multimessenger astronomy and for tests of gravity. In this work, we develop a phenomenological (analytical) toy model for the supernova neutrino memory effect, which is overall consistent with the results of numerical simulations. This description is then generalized to several case studies of interest. We find that, for a galactic supernova, the dimensionless strain, h(t), is of order ~ 10 -22 - 10 -21 , and develops over a typical time scale that varies between ~ 0.1 - 10 s, depending on the time-evolution of the anisotropy of the neutrino emission. The characteristic strain, h c (f), has a maximum at a frequency f max ~ Script $\mathcal{O}$(10 -1 ) - Script $\mathcal{O}$(1) Hz. The detailed features of the time- and frequency-structure of the memory strain will inform us of the matter dynamics near the collapsed core, and allow to distinguish between different stellar collapse scenarios. Next generation gravitational wave detectors like DECIGO and BBO will be sensitive to the neutrino memory effect for supernovae at typical galactic distances and beyond; with Ultimate DECIGO exceeding a detectability distance of 10 Mpc

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Neural-network accelerated coupled core-pedestal simulations with self-consistent transport of impurities and compatible with ITER IMAS

pedestal structure, current profile, and plasma equilibrium physics has been developed and tested against a DIII-D discharge. Here, key features of the achieved core-pedestal coupled workflow are its ability to account for the transport of impurities in the plasma self-consistently, as well as its use of machine learning accelerated models for the pedestal structure and for the turbulent transport physics. Notably, the coupled workflow is implemented within the OMFIT framework, and makes use of the ITER integrated modeling and analysis suite (IMAS) data structure for exchanging data among the physics codes that are involved in the simulations. Such technical advance has been facilitated by the development of a new numerical library named OMAS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Self-consistent core-pedestal ITER scenario modeling

The purpose of these integrated ITER simulations is to identify dependencies that can impact the performance of ITER. The dependence of fusion power production, temperature and density pedestals, and core profiles on varying magnetic-q, edge density fueling strength, neoclassical transport, magnetic field strength, and alpha heating, are examined. It is noted that ion modes usually dominate the interior, while electron modes dominate the barrier. The electron mode without flow shear is substantially stronger. The q increase tends to cause more kinetic ballooning modes at the edge and the q decrease means that the peeling is getting worse, but the ballooning is getting better. The large edge q tends to provide hollow density while small edge q gives normal density profile. This is consistent with the observation that the density of particles is inversely proportional to the density of the plasma current. The rise in the source of the edge particle increases the density of the edge and the reaction rate close to the edge increases temperature fluxes, resulting in weak pedestal barriers. When neoclassical transport is turned off or the strength of B-field is increased, the pronounced edge barriers are identified. In addition, a distinct effect on the magnetohydrodynamic (MHD) modes is observed due to the increased B-field. The interesting aspect is that the barrier collapses about q = 2 as the stability of MHD has decreased to replace the barrier with a continuous slope but with roughly the same fusion power. This would actually be good for a reactor. The slope of the H-mode pedestal is found to be reduced due to the alpha heating. It is expected that the problem of edge-localized modes causing damage to the first wall will be eased. The effects of circular, elongated, and general geometry on plasma profiles are also compared and contrasted. The circular geometry has a hollow density profile and no edge or internal thermal transport barrier (ETB or ITB). However, both ETBs and ITBs can be found in the elongated geometry. In general geometry, there is a weaker ETB, comparable ITBs, but a higher edge particle transport barrier than in elongated geometry. Higher density near the edge, on the other hand, causes more wall erosion, so elongated geometry might be the best option.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Comparison of core Ar 17+ and Mo 32+ toroidal rotation in C-Mod plasmas

Abstract Core ( r / a < 0.5) toroidal rotation from argon (Ar 17+ , 40 AMU) and molybdenum (Mo 32+ , 96 AMU) ions has been compared in C-Mod tokamak plasmas over a wide range of operating conditions and confinement schemes, including Ohmic L-mode in the linear and saturated regimes, ion cyclotron range of frequencies heated I-mode and H-mode, as well as in discharges with induced locked modes and with external current and rotation drive. In all cases the velocities of the two impurities are identical within about 5%, for a range between −60 and +80 km s −1 . This is in general agreement with the predictions of neo-classical theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Density wavenumber spectrum measurements, synthetic diagnostic development, and tests of quasilinear turbulence modeling in the core of electron-heated DIII-D H-mode plasmas

Abstract Measurements of the turbulent density wavenumber spectrum, δ n ˆ e ( k ⊥ ) , using the Doppler Back-Scattering (DBS) diagnostic are reported from DIII-D H-mode plasmas with electron cyclotron heating as the only auxiliary heating method. These electron-heated plasmas have low collisionality, ν e ∗ < 1 , T e / T i > 1 , and zero injected torque—a regime expected to be relevant for future fusion devices. We probe density fluctuations in the core ( ρ ≈ 0.7) over a broad wavenumber range, 0.5 ⩽ k ⊥ ⩽ 16 cm −1 ( 0.1 ⩽ k ⊥ ρ s ⩽ 5 ), to characterize plasma instabilities and compare with theoretical predictions. We present a novel synthetic DBS diagnostic to relate the back-scattered power spectrum, P s ( k ⊥ ) —which is directly measured by DBS—to the underlying electron density fluctuation spectrum, δ n ˆ e ( k ⊥ ) . The synthetic DBS P s ( k ⊥ ) spectrum is calculated by combining the SCOTTY beam-tracing code with a model δ n ˆ e ( k ⊥ ) predicted either analytically or numerically. In this work we use the quasi-linear code Trapped Gyro-Landau Fluid (TGLF) to approximate the δ n ˆ e ( k ⊥ ) spectrum. We find that TGLF, using the experimental profiles, is capable of closely reproducing the DBS measurements. Both the DBS measurements and the TGLF-DBS synthetic diagnostic show a wavenumber spectrum with variable decay. The measurements show weak decay ( k −0.6 ) for k < 3.5 cm −1 , with k −2.6 at intermediate- k ( 3.5 ⩽ k ⩽ 8.5 cm −1 ), and rapid decay ( k −9.4 ) for k > 8.5 cm −1 . Scans of physics parameters using TGLF suggest that the normalized ∇ T e scale-length, R / L T e , is an important factor for distinguishing microturbulence regimes in these plasmas. A combination of DBS observations and TGLF simulations indicate that fluctuations remain peaked at ITG-scales (low k ) while R / L T e -driven TEM/ETG-type modes (intermediate/high k ) are marginally sub-dominant.

synthetic diagnostics↗
DOE OSTI2024

Enhancing predictive capabilities in fusion burning plasmas through surrogate-based optimization in core transport solvers

Abstract This work presents the PORTALS framework (Rodriguez-Fernandez et al 2022 Nucl. Fusion 62 076036), which leverages surrogate modeling and optimization techniques to enable the prediction of core plasma profiles and performance with nonlinear gyrokinetic simulations at significantly reduced cost, with no loss of accuracy. The efficiency of PORTALS is benchmarked against standard methods, and its full potential is demonstrated on a unique, simultaneous 5-channel (electron temperature, ion temperature, electron density, impurity density and angular rotation) prediction of steady-state profiles in a DIII-D ITER Similar Shape plasma with GPU-accelerated, nonlinear CGYRO (Candy et al 2016 J. Comput. Phys. 324 73–93). This paper also provides general guidelines for accurate performance predictions in burning plasmas and the impact of transport modeling in fusion pilot plants studies.

Physics↗
DOE OSTI2024

Overview of physics results from MAST upgrade towards core-pedestal-exhaust integration

Recent results from MAST Upgrade are presented, emphasising understanding the capabilities of this new device and deepening understanding of key physics issues for the operation of ITER and the design of future fusion power plants. The impact of MHD instabilities on fast ion confinement have been studied, including the first observation of fast ion losses correlated with Compressional and Global Alfvén Eigenmodes. High-performance plasma scenarios have been developed by tailoring the early plasma current ramp phase to avoid internal reconnection events, resulting in a more monotonic q profile with low central shear. The impact of m/n = 3/2, 2/1 and 1/1 modes on thermal plasma confinement and rotation profiles has been quantified, and scenarios optimised to avoid them have transiently reached values of normalised beta approaching 4.2. In pedestal and ELM physics, a maximum pedestal top temperature of ~350 eV has been achieved, exceeding the value achieved on MAST at similar heating power. Mitigation of type-I ELMs with n = 1 RMPs has been observed. Studies of plasma exhaust have concentrated on comparing conventional and Super-X divertor configurations, while X-point target, X-divertor and snowflake configurations have been developed and studied in parallel. In L-mode discharges, the separatrix density required to detach the outer divertors is approximately a factor 2 lower in the Super-X than the conventional configuration, in agreement with simulations. Detailed analysis of spectroscopy data from studies of the Super-X configuration reveal the importance of including plasma-molecule interactions and D 2 Fulcher band emission to properly quantify the rates of ionisation, plasma-molecule interactions and volumetric recombination processes governing divertor detachment. In H-mode with conventional and Super-X configurations, the outer divertors are attached in the former and detached in the latter with no impact on core or pedestal confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

TRANSP-TGLF core predictive modeling of the JET DT baseline scenario

In recent years, an intense modeling activity has been focused on preparing and analyzing the second JET Deuterium–Tritium (D–T) experimental campaign DTE2. Among the numerous scientific outcomes of this campaign was the unique opportunity to test and validate the state of the art of modeling tools with fusion-relevant DT plasmas using the full metallic ITER-like wall in different scenarios. This work reports on the core predictive modeling of plasma density, electron and ion temperatures (n e , T e , T i ) performed using TRANSP (Pankin et al 2025 Comput. Phys. Commun. 312 109611) coupled with Trapped Gyro-Landau Fluid (TGLF)-SAT2 (Kinsey et al 2008 Phys. Plasmas 15 055908), (Staebler et al 2021 Nucl. Fusion 61 116007) for the JET D–T baseline scenario (I p = 3.5 MA, q 95 = 3, β N < 2, with pellet pacing) (Garzotti et al 2025 Plasma Phys. Control. Fusion 67 075011). The sensitivity to different input parameters, as the $\vec{E}$ x $\vec{B}$ shear parameterization and the values of the kinetic quantities at the boundary of the prediction domain (ρ = 0.85) has been assessed, identifying the confidence interval of the prediction results. In particular, the dependence of the electron density profile on the particle source parameters has been studied, identifying the ionization source as the main cause for the density gradient under-prediction obtained by TRANSP-TGLF, reported in (Hyun-Tae et al 2023 Nucl. Fusion 63 112004).

JET↗
DOE OSTI2020

A low-luminosity core-collapse supernova very similar to SN 2005cs

ABSTRACT We present observations and analysis of PSN J17292918+7542390, a low-luminosity Type II-P supernova (LL SN IIP). The observed sample of such events is still low, and their nature is still under debate. Such SNe are similar to SN 2005cs, a well-observed LL Type II-P event, having low expansion velocities, and small ejected 56Ni mass. We have developed a robust and relatively fast Monte Carlo code that fits semi-analytic models to light curves of core-collapse SNe. This allows the estimation of the most important physical parameters, like the radius of the progenitor star, the mass of the ejected envelope, the mass of the radioactive nickel synthesized during the explosion, among others. PSN J17292918+7542390 has $R_0 = 91_{-70}^{+119} \times 10^{11} \, \text{cm}$, $M_\text{ej} = 9.89_{-1.00}^{+2.10} \, \mathrm{ M}_{\odot }$, $E_{\mbox{kin}} = 0.65_{-0.18}^{+0.19} \, \text{foe}$, and $v_{\mbox{exp}} = 3332_{-347}^{+216}$ km s−1, for its progenitor radius, ejecta mass, kinetic energy, and expansion velocity, respectively. The initial nickel mass of the PSN J17292918+7542390 turned out to be $1.55_{-0.70}^{+0.75} \times 10^{-3} \, \mathrm{M}_{\odot }$. The measured photospheric velocity at the earliest observed phase is 7000 km s−1. As far as we can tell based on the small population of observed LL SNe IIP, the determined values are typical for these events.

Jäger, Jr, Zoltán↗
DOE OSTI2020

A systematic study of proto-neutron star convection in three-dimensional core-collapse supernova simulations

ABSTRACT This paper presents the first systematic study of proto-neutron star (PNS) convection in three dimensions (3D) based on our latest numerical fornax models of core-collapse supernova (CCSN). We confirm that PNS convection commonly occurs, and then quantify the basic physical characteristics of the convection. By virtue of the large number of long-term models, the diversity of PNS convective behaviour emerges. We find that the vigour of PNS convection is not correlated with CCSN dynamics at large radii, but rather with the mass of PNS − heavier masses are associated with stronger PNS convection. We find that PNS convection boosts the luminosities of νμ, ντ, $\bar{\nu }_{\mu }$, and $\bar{\nu }_{\tau }$ neutrinos, while the impact on other species is complex due to a competition of factors. Finally, we assess the consequent impact on CCSN dynamics and the potential for PNS convection to generate pulsar magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Core-collapse supernova neutrino emission and detection informed by state-of-the-art three-dimensional numerical models

ABSTRACT Based on our recent three-dimensional core-collapse supernova (CCSN) simulations including both exploding and non-exploding models, we study the detailed neutrino signals in representative terrestrial neutrino observatories, namely Super-Kamiokande (Hyper-Kamiokande), DUNE, JUNO, and IceCube. We find that the physical origin of difference in the neutrino signals between 1D and 3D is mainly proto-neutron-star convection. We study the temporal and angular variations of the neutrino signals and discuss the detectability of the time variations driven by the spiral standing accretion shock instability (spiral SASI) when it emerges for non-exploding models. In addition, we determine that there can be a large angular asymmetry in the event rate (${\gtrsim} 50 {{\ \rm per\ cent}}$), but the time-integrated signal has a relatively modest asymmetry (${\lesssim} 20 {{\ \rm per\ cent}}$). Both features are associated with the lepton-number emission self-sustained asymmetry and the spiral SASI. Moreover, our analysis suggests that there is an interesting correlation between the total neutrino energy (TONE) and the cumulative number of neutrino events in each detector, a correlation that can facilitate data analyses of real observations. We demonstrate the retrieval of neutrino energy spectra for all flavours of neutrino by applying a novel spectrum reconstruction technique to the data from multiple detectors. We find that this new method is capable of estimating the TONE within the error of ∼20 per cent if the distance to the CCSN is ≲6 kpc.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Retrieval of energy spectra for all flavours of neutrinos from core-collapse supernova with multiple detectors

ABSTRACT We present a new method by which to retrieve energy spectrum for all falvours of neutrinos from core-collapse supernova (CCSN). In the retrieval process, we do not assume any analytic formulas to express the energy spectrum of neutrinos but rather take a direct way of spectrum reconstruction from the observed data; the singular value decomposition algorithm with a newly developed adaptive energy-gridding technique is adopted. We employ three independent reaction channels having different flavour sensitivity to neutrinos. Two reaction channels, inverse beta decay on proton and elastic scattering on electrons, from a water Cherenkov detector such as Super-Kamiokande (SK) and Hyper-Kamiokande (HK), and a charged current reaction channel with Argon from the Deep Underground Neutrino Experiment (DUNE) are adopted. Given neutrino oscillation models, we iteratively search the neutrino energy spectra at the CCSN source until they provide the consistent event counts in the three reaction channels. We test the capability of our method by demonstrating the spectrum retrieval to a theoretical neutrino data computed by our recent three-dimensional CCSN simulation. Although the energy spectrum with either electron-type or electron-type antineutrinos at the CCSN source has relatively large error compared to that of other species, the joint analysis with HK + DUNE or SK + DUNE will provide precise energy spectrum of all flavours of neutrinos at the source. Finally, we discuss perspectives for improvements of our method by using neutrino data of other detectors.

79 ASTRONOMY AND ASTROPHYSICS↗