Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONFIGURATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Radiation analysis of various vehicle and payload configurations for the reusable nuclear shuttle

Radiation analyses were performed and shielding weight requirements were estimated for various candidate vehicle and payload configurations for use with the reusable nuclear shuttle. The analyses included both point kernel and Monte Carlo approaches. The effects on reduced shield weight were determined for propellant ranks with pointed conical tank bottoms and for one case of a cluster of small tanks. This later case, however, had an arrangement which had no center tank in the upper tier of tanks. This effect negated most of the gain of going to the smaller tanks. A range of shield weights is presented for various light and heavy manned payload configurations when used in conjunction with a single liquid hydrogen propellant tank, 33 ft in diameter with a 15 deg conical tank bottom.

Preeg, W. E.↗
NASA NTRS1972

High Reynolds number turbulent heating to two simplified shuttle configurations

Turbulent heating and transition data, taken from three test facilities, for two space shuttle configurations are presented. Major efforts were on: (1) the effect of the two geometries having different amounts of cross flow and how the different cross flows affect heating and transition, (2) the experimental level of turbulent heating and the ability to predict the level of turbulent heating, and (3) a comparison of the transitional and turbulent heating in three facilities with two model scale sizes to investigate the facility effects and scale-size effect on transition and turbulent heating. The three facilities in which the configurations were tested are the Langley Mach 8 variable-density hypersonic tunnel and the Arnold Engineering Development Center tunnel B and tunnel F at Mach numbers of 8 and 10.5, respectively.

Johnson, C. B.↗
NASA NTRS1972

Wind-tunnel investigation of the aerodynamic characteristics of the M2-F2 lifting-body entry configuration at transonic and supersonic Mach numbers

Results are presented for wind tunnel tests of a one to twelve scale model of the M2-F2 lifting body entry configuration at transonic and supersonic speeds. The Mach number was varied from 0.6 to 2.0. Reynolds numbers ranged from 4 to 13 million. Angles of attack and sideslip varied from minus 8 degrees to plus 20 degrees and minus 4 degrees to plus 6 degrees respectively. A brief history of the development of the configuration is included.

Keener, E. R.↗
NASA NTRS1972

Aerodynamic stability and drag characteristics of the MSFC pressure fed booster configurations at Mach numbers from 0.9 to5.0

Experimental aerodynamic investigations were conducted in the NASA/MSFC 14 x 14 Inch Trisonic Wind Tunnel during January 1972 on 0.003366 and 0.00419 scale models of the MSFC space shuttle pressure fed booster configurations. The configurations tested were a 40 deg cone/cylinder/13 deg flare with and without fins, a 40 deg cone/cylinder/13 deg flare/9 deg flare with and without fins, a 35 deg cone/cylinder with and without fins, a 35 deg cone/cylinder/7 deg flare and a 35 deg cone/cylinder with straight extension. Six component aerodynamic force and moment data were recorded over a Mach number range of 0.9 to 5.0. Model angle of attack range was -10 to +10 deg and +20 to 80 at 0 deg sideslip. Model sideslip range was -10 to +10 deg at nominal angles of attack of 0, 30 and 51 deg

Baker, J.↗
NASA NTRS1972

Experimental verification of low sonic boom configuration

A configuration designed to produce near field signature has been tested at M = 2.71 and the results are analyzed, by taking in account three-dimensional and second order effects. The configuration has an equivalent total area distribution that corresponds to an airplane flying at 60,000 ft. having a weight of 460,000 lbs, and 300 ft. length. A maximum overpressure of 0.95 lb/square foot has been obtained experimentally. The experimental results agree well with the analysis. The investigation indicates that the three-dimensional effects are very important when the measurements in wind tunnels are taken at small distances from the airplane.

Ferri, A.↗
NASA NTRS1972

Lee-surface vortex effects over configurations in hypersonic flow.

The role of vortices in producing intense localized hea ting to the leeward regions of a variety of configurations is shown and discussed. From experimental results, flow-field models are proposed which account for the interaction of the vortex and the upper surface boundary layer; correlation of the heating is then possible for planar delta wings. Guidelines derived from these studies are offered which reduce the vortex-induced heating by appropriate shaping of configurations such as the space shuttle. Reynolds number is shown to exert a large influence on the magnitude and location of the induced heating.

Whitehead, A. H., Jr.↗
NASA NTRS1972

The configuration of the geomagnetic field.

Spherical harmonic representations of the geomagnetic field based on ground-based and low-altitude spacecraft measurements adequately describe the field within several earth radii of the earth's surface. As the internal field decreases with increasing distance from the earth, external field sources become relatively more important. In the region of 3 to 6 earth radii, magnetospheric plasma inflates the field lines and decreases the field strength by an amount which is typically 10's of gammas and occasionally 100's of gammas. At greater distances on the day side of the earth, the solar wind compresses the field and produces equatorial field strengths of approximately 60 gammas at 10 earth radii. Field lines near the magnetopause intersect the earth at approximately 78 deg latitude in the sunward hemisphere. The solar wind drags high latitude field lines away from the earth in the night hemisphere forming the geomagnetic tail and neutral sheet. Asymmetric field inflation in the magnetosphere occurs during magnetic disturbances with the largest effects concentrated in the evening quadrant. The tail configuration can deviate substantially from the average configuration during magnetic disturbances.

Fairfield, D. H.↗
NASA NTRS1972

Average plasma-sheet configuration near 60 earth radii.

Nearly three years of Ames magnetometer data from Explorer 35 are used to establish plasma-sheet configurations in the geomagnetic tail at the lunar orbit. The plasma sheet is defined either as a region with different field orientations from normal magnetic-field directions in the tail, or as a region where the magnetic field variance is greater than elsewhere in the tail. The plasma-sheet configuration at the lunar orbit derived in this manner is found to be similar to the distribution at 18 earth radii observed by Vela satellites. The seasonal dependence and variations with geomagnetic activity are also presented.

Meng, C.-I.↗
NASA NTRS1972

Equilibrium configurations of Vlasov plasmas carrying a current component along an external magnetic field.

A model of equilibrium configurations of Vlasov plasmas is considered which represents a combination of the models of Harris (1962) and Nicholson (1963). These plasma configurations carry a current component along an external magnetic field. The considered slab model contains a diamagnetic current and a field-aligned current for an arbitrary ratio of particle pressure to magnetic pressure of the applied constant field. For a fixed pressure ratio and field-aligned current, the model admits a family of equilibrium solutions in which the diamagnetic currents range from zero to a maximum value. The amount of diamagnetic current flowing in a machine depends on the width of the machine, the field-aligned current and other plasma parameters.

Kan, J. R.↗
NASA NTRS1972

Viking configuration pitch damping derivatives as influenced by support interference and test technique at transonic and supersonic speeds.

Experimental studies to determine the 140-deg spherically-blunted cone configuration single degree-of-freedom damping derivative included model sting interference effects at M = 1.76 to 3.0. Minimal sting influences are noted with sting/model diameter ratios of 0.183 and effective sting lengths of 3.55 of the reference length. Increasing the ratio of sting diameter to reference length to 0.53 influences damping considerably at angles of attack from 0 to 3 deg at all Reynolds numbers but shows little or no effect at higher angles. Free-flight model wake geometries (wake neck position and size) correlate well with those from captive model tests with the small diameter sting; this adds confidence to obtaining damping derivatives through captive model testing. The damping characteristics of an early Viking configuration obtained on 11.23 and 4.35% scale models using forced and free oscillation test methods, respectively, in two different test facilities are compared. The agreement is quite good under test conditions.

Steinberg, S.↗
NASA NTRS1972

Electron-beam flow visualization - Applications in the definition of configuration aerothermal characteristics.

Comparisons between flow visualization systems using electron-beam fluorescence, schlieren, and shadowgraph techniques illustrate the advantages associated with the electron beam. Specific applications of this method as an aid in defining the origin of erosion on a heat-transfer model are cited. Results of combined electron-beam oil-flow studies on configurations illustrate that the simultaneous definition of the external flow field and its surface flow can be obtained. Comparisons between the electron-beam oil-flow visualization method and phase-change coating heat-transfer tests on a shuttle ascent configuration indicate the complementary nature of these two testing techniques. Potential methods for improving the electron-beam technique are included.

Woods, W. C.↗
NASA NTRS1972

Space shuttle: Longitudinal aerodynamic characteristics of low aspect ratio wing configurations in ground effect for a moving and stationary ground surface

A 0.05-scale model of the NASA-MSC Orbiter 040A Configuration was tested. Test duration was approximately 80 hours during which the model was tested in and out of ground effect with a stationary and moving ground belt. Model height from ground plane surface was varied from one and one-half wing span to landing touchdown while angle of attack varied from -4 to 20 degrees. Eleven effectiveness and alternate configuration geometries were tested to insure complete analysis of low aspect ratio wing aircraft in the presence of ground effect. Test Mach number was approximately 0.067 with a corresponding dynamic pressure value of 6.5 psf.

Romere, P. O.↗
NASA NTRS1972

Ground effect for V/STOL aircraft configurations and its simulation in the wind tunnel. Part 2: Experimental studies

Wind tunnel tests on a finite, knee-blowing-flapped wing and on a direct jet lift configuration were performed in a 30 x 42 inch wind tunnel. The objectives of these tests were, in experimental order:(1) to obtain definitive fixed-versus-moving ground comparisons on a powered, high-lift finite wing and on a lifting jet configuration as a function of model height and lift, (2) to understand the flow mechanism which lead to observed differences between moving and fixed-ground results, (3) to discover whether the above effects of a moving ground plane can be simulated by tangential-blowing boundary layer control at the wind tunnel floor, and (4) to check the form and the numerical constants for the wall jet blowing equation derived theoretically in Part I of this report. This relates wall jet blowing quantities to model lift coefficient.

Hackett, J. E.↗
NASA NTRS1972

Space shuttle: Aerodynamic stability, control effectiveness and drag characteristics of a shuttle orbiter configuration at Mach numbers from 0.6 to 4.96

Experimental aerodynamic investigations were conducted in the NASA/MSFC 14-inch Trisonic Wind Tunnel from Sept. 27 to Oct. 7, 1972 on a 0.004 scale model of the NR ATP baseline shuttle orbiter configuration. Six component aerodynamic force and moment data were recorded at 0 deg sideslip angle over an angle of attack range from 0 to 20 deg for Mach numbers of 0.6 to 4.96, 20 to 40 deg for Mach numbers of 0.6, 0.9, 2.99, and 4.96, and 40 to 60 deg for Mach numbers of 2.99 and 4.96. Data were obtained over a sideslip range of -10 to 10 deg at 0, 10, and 20 deg angles of attack over the Mach range and 30 and 50 deg at Mach numbers of 2.99 and 4.96. The purpose of the test was to define the buildup, performance, stability, and control characteristics of the orbiter configuration. The model parameters, were: body alone; body-wing; body-wing-tail; elevon deflections of 0, 10, -20, and -40 deg both full and split); aileron deflections of plus or minus 10 deg (full and split); rudder flares of 10 and 40 deg, and a rudder deflection of 15 deg about the 10 and 40 deg flare positions.

Ramsey, P. E.↗
NASA NTRS1972

Aerodynamic static stability and control effectiveness of a parametric shuttle launch configuration

Experimental aerodynamic investigations were conducted in the NASA/MSFC 14-inch Trisonic Wind Tunnel on a 0.004-scale model of the NR ATP baseline Shuttle launch configuration. The test model consisted of the NR ATP baseline orbiter, external tank, and SRB's with nozzles. Six component aerodynamic force and moment data were recorded over an angle of attack range from minus 10 deg to 10 deg at zero degrees sideslip and angle of sideslip range of minus 10 deg to 10 deg at zero angle of attack for a Mach range of 0.6 to 4.96. Rudder flare was constant at 10 deg during the entire test. The purpose of the test was to define the performance, stability, and control characteristics of the launch configuration as well as to investigate the buildup effect of two geometrical parameters.

Ramsey, P. E.↗
NASA NTRS1973

Summary of design and blade-element performance data for 12 axial-flow pump rotor configurations

A collection of noncavitating blade-element performance data for 12 axial-flow pump rotor configurations is presented in tabular form. Rotor design philosophy, test apparatus and procedure, and data reduction and evaluation are discussed. A data storage and recall computer program is described. All but one of the rotor configurations considered were composed of double-circular-arc blade sections and were designed for high inlet relative flow angles. Hub-tip radius ranged from 0.40 to 0.90.

Miller, M. J.↗
NASA NTRS1972

Flap noise measurements for STOL configurations using external upper surface blowing

Screening tests of upper surface blowing on externally blown flaps configurations were conducted. Noise and turning effectiveness data were obtained with small-scale, engine-over-the-wing models. One large model was tested to determine scale effects. Nozzle types included circular, slot, D-shaped, and multilobed. Tests were made with and without flow attachment devices. For STOL applications the particular multilobed mixer and the D-shaped nozzles tested were found to offer little or no noise advantage over the round convergent nozzle. High aspect ratio slot nozzles provided the quietest configurations. In general, upper surface blowing was quieter than lower surface blowing for equivalent EBF models.

Dorsch, R. G.↗