Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPRESSIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Compressed glassy carbon: An ultrastrong and elastic interpenetrating graphene network

Carbon’s unique ability to have both sp 2 and sp 3 bonding states gives rise to a range of physical attributes, including excellent mechanical and electrical properties. We show that a series of lightweight, ultrastrong, hard, elastic, and conductive carbons are recovered after compressing sp 2 -hybridized glassy carbon at various temperatures. Compression induces the local buckling of graphene sheets through sp 3 nodes to form interpenetrating graphene networks with long-range disorder and short-range order on the nanometer scale. The compressed glassy carbons have extraordinary specific compressive strengths—more than two times that of commonly used ceramics—and simultaneously exhibit robust elastic recovery in response to local deformations. Finally, this type of carbon is an optimal ultralight, ultrastrong material for a wide range of multifunctional applications, and the synthesis methodology demonstrates potential to access entirely new metastable materials with exceptional properties.

36 MATERIALS SCIENCE↗

Exploring the feasibility of lossy compression for PDE simulations

Checkpoint restart plays an important role in high-performance computing (HPC) applications, allowing simulation runtime to extend beyond a single job allocation and facilitating recovery from hardware failure. Yet, as machines grow in size and in complexity, traditional approaches to checkpoint restart are becoming prohibitive. Current methods store a subset of the application’s state and exploit the memory hierarchy in the machine. However, as the energy cost of data movement continues to dominate, further reductions in checkpoint size are needed. Lossy compression, which can significantly reduce checkpoint sizes, offers a potential to reduce computational cost in checkpoint restart. This article investigates the use of numerical properties of partial differential equation (PDE) simulations, such as bounds on the truncation error, to evaluate the feasibility of using lossy compression in checkpointing PDE simulations. Restart from a checkpoint with lossy compression is considered for a fail-stop error in two time-dependent HPC application codes: PlasComCM and Nek5000. Results show that error in application variables due to a restart from a lossy compressed checkpoint can be masked by the numerical error in the discretization, leading to increased efficiency in checkpoint restart without influencing overall accuracy in the simulation.

97 MATHEMATICS AND COMPUTING↗

StimuFrac Compressibility as a Function of CO2 Molar Fraction

Compressibility values were obtained in a range of pressures at 250degC by employing a fixed volume view cell completely filled with PAA aqueous solution and injecting CO2 at constant flow rate (0.3mL/min). Pressure increase as a function of supercritical CO2 (scCO2) mass fraction in the mixture was monitored. The plot shows the apparent compressibility of Stimufrac as a function of scCO2 mass fraction obtained in a pressure range between 2100-7000 psi at 250degC. At small mass fractions of scCO2 the compressibility increases probably due to the dissolution/reaction of CO2 in aqueous PAA and reaches a maximum at mCO2/mH2O = 0.06. Then, compressibility decreases showing a linear relationship with scCO2 mass fraction due to the continuous increase in density of the binary fluid associated to the pressure increase.

15 GEOTHERMAL ENERGY↗

A Framework of Hyperspectral Image Compression using Neural Networks

Hyperspectral image analysis has gained considerable attention due to its wide range of applications. Hyperspectral images provide a vast amount of information about underlying objects in an image by using a large range of the electromagnetic spectrum for each pixel. However, since the same image is taken multiple times using distinct electromagnetic bands, the size of such images tend to be significant, which leads to greater processing requirements. The aim of this paper is to present a proposed framework for image compression and to study the possible effects of spatial compression on quality of unmixing results. Image compression allows us to reduce the dimensionality of an image while still preserving most of the original information, which could lead to faster image processing. This paper presents preliminary results of different training techniques used in Artificial Neural Network (ANN) based compression algorithm.

97 MATHEMATICS AND COMPUTING↗

Effective Size Analysis of the Diametral Compression (Brazil) Test Specimen

This study considers the finite element analysis (FEA) simulation and Weibull effective size analysis for the diametral compression (DC) or Brazil specimen loaded with three different push-rod geometries. Those geometries are a flat push-rod, a push-rod whose radius of curvature is larger than that for the DC specimen, and a push-rod whose radius of curvature matches that of the DC specimen. Such established effective size analysis recognizes that the tensile strength of structural ceramics is typically one to two orders of magnitude less than its compressive strength. Therefore, because fracture is much more apt to result from a tensile stress than a compressive one, this traditional analysis only considers the first principal tensile stress field in the mechanically loaded ceramic component for the effective size analysis. The effective areas and effective volumes were computed as function of Weibull modulus using the CARES/Life code. Particular attention was devoted to the effect of mesh sensitivity and localized stress concentration. The effect of specimen width on the stress state was also investigated. The effects of push-rod geometry, the use of steel versus WC push-rods, and considering a frictionless versus no-slip interface between push-rod and specimen on the maximum stresses, where those stresses are located, and the effective area and effective volume results are described. Of the three push-rod geometries, it is concluded that the push-rod (made from WC rather than steel) whose radius of curvature matches that of the DC specimen is the most apt to cause fracture initiation within the specimen's bulk rather than at the loading interface. Therefore, its geometry is the most likely to produce a valid diametral compression strength test. However, the DC specimen remains inefficient in terms of its area and volume efficiencies; namely, the tensile strength of only a few percent of the specimen's entire area or volume is sampled. Given the high probability that a valid (or invalid) test can be proven by ceramic fractographic practices suggests that this test method and specimen is questionable for use with relatively strong structural ceramics.

36 MATERIALS SCIENCE↗

Application of Compressive Sensing for Gravitational Microlensing Events

Compressive sensing is a novel mathematical technique for simultaneous data acquisition and compression. This technique is particularly apt for time-series photometric measurements. In this work we apply compressive sensing to time-series photometric measurements specifically obtained due to gravitational microlensing events. We show through simulation modelling the error sensitivity for detecting microlensing event parameters. Particularly, we show the relation of the amount of error and its impact on the microlensing parameters of interest. We derive statistical error bounds to apply those as a baseline for analyzing the effectiveness of compressive sensing application. Our results conclude that for single and binary microlensing events we can obtain error less than 1% over a 3-pixel radius of the center of the microlensing star by using 25% Nyquist rate measurements.

Compressive Sensing↗

Isothermal compression behavior of (Mg,Fe)O using neon as a pressure medium

We present isothermal volume compression behavior of two polycrystalline (Mg,Fe)O samples with FeO = 39 and 78 mol% up to {approx}90 GPa at 300 K using synchrotron X-ray diffraction and neon as a pressure-transmitting medium. For the iron-rich (Mg{sub 0.22}Fe{sub 0.78})O sample, a structural transition from the B1 structure to a rhombohedral structure was observed at 41.6 GPa, with no further indication of changes in structural or compression behavior changes up to 93 GPa. In contrast, a change in the compression behavior of (Mg{sub 0.61}Fe{sub 0.39})O was observed during compression at P {ge} 71 GPa and is indicative of a spin crossover occurring in the Fe{sup 2+} component of (Mg{sub 0.61}Fe{sub 0.39})O. The low-spin state exhibited a volume collapse of {approx}3.5%, which is a larger value than what was observed for a similar composition in a laser-heated NaCl medium. Upon decompression, the volume of the high-spin state was recovered at approximately 65 GPa. We therefore bracket the spin crossover at 65 {le} P (GPa) {le} 77 at 300 K (Mg{sub 0.61}Fe{sub 0.39})O. We observed no deviation from the B1 structure in (Mg{sub 0.61}Fe{sub 0.39})O throughout the pressure range investigated.

58 GEOSCIENCES↗

Synthetic Lead Bromapatite: X-ray Structure at Ambient Pressure and Compressibility up to about 20 GPa

Lead bromapatite [Pb{sub 10}(PO{sub 4}){sub 6}Br{sub 2}] has been synthesized via solid-state reaction at pressures up to 1.0 GPa, and its structure determined by single-crystal X-ray diffraction at ambient temperature and pressure. The large bromide anion is accommodated in the c-axis channel by lateral displacements of structural elements, particularly of Pb2 cations and PO{sub 4} tetrahedra. The compressibility of bromapatite was also investigated up to about 20.7 GPa at ambient temperature, using a diamond-anvil cell and synchrotron X-ray radiation. The compressibility of lead bromapatite is significantly different from that of lead fluorapatite. The pressure-volume data of lead bromapatite (P < 10 GPa) fitted to the third-order Birch-Murnaghan equation yield an isothermal bulk modulus (K{sub T}) of 49.8(16) GPa and first pressure derivative (K{sub T}) of 10.1(10). If K{sub T} is fixed at 4, the derived K{sub T} is 60.8(11) GPa. The relative difference of the bulk moduli of these two lead apatites is thus about 12%, which is about two times the relative difference of the bulk moduli ({approx}5%) of the calcium apatites fluorapatite [Ca{sub 10}(PO{sub 4}){sub 6}F{sub 2}], chlorapatite [Ca{sub 10}(PO{sub 4}){sub 6}Cl{sub 2}] and hydroxylapatite [Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2}]. Another interesting feature apparently related to the replacement of F by Br in lead apatite is the switch in the principle axes of the strain ellipsoid: the c-axis is less compressible than the a-axis in lead bromapatite but more compressible in lead fluorapatite.

58 GEOSCIENCES↗

Compression-based integral curve data reuse framework for flow visualization

Currently, by default, integral curves are repeatedly re-computed in different flow visualization applications, such as FTLE field computation, source-destination queries, etc., leading to unnecessary resource cost. We present a compression-based data reuse framework for integral curves, to greatly reduce their retrieval cost, especially in a resource-limited environment. In our design, a hierarchical and hybrid compression scheme is proposed to balance three objectives, including high compression ratio, controllable error, and low decompression cost. Specifically, we use and combine digitized curve sparse representation, floating-point data compression, and octree space partitioning to adaptively achieve the objectives. Results have shown that our data reuse framework could acquire tens of times acceleration in the resource-limited environment compared to on-the-fly particle tracing, and keep controllable information loss. Moreover, our method could provide fast integral curve retrieval for more complex data, such as unstructured mesh data.

97 MATHEMATICS AND COMPUTING↗

Observed compression of in situ tree stems during freezing

Freezing temperatures can influence the material properties of trees. Understanding how forest biometeorological interactions respond to freezing temperatures is important for forest science and management, as its effects can cascade through coupled hydrological and ecological processes including limitations on tree growth, changes to canopy interception, and influences on atmospheric turbulence. This short communication details the effect of sub-freezing temperatures on the mechanical displacement of three in situ Pinus contorta Douglas (lodgepole pine) stems during a winter season (2013–2014) at Niwot Ridge Mountain Research Station (CO, USA). Although previous research on harvested trees suggests longitudinal stem expansion should occur as temperatures decrease below freezing, we observed longitudinal compression in live stems below -3 °C that linearl y correlated with sub-zero air temperatures ranging down to -22 °C. Freeze-related compression of stems frequently achieved displacement magnitudes comparable to applying 55 kN of compressive force (800 μm). Hypotheses are proposed to explain the significant mechanical displacement observed due to freezing: (1) internal gas release as freezing fronts propagate through stems; (2) short-term relocation of water via sap exudation or preferential ice crystal growth. As the observed stem compression response to freezing is substantial, future work on underlying processes and consequences is merited. The measurement technique used here may prove useful to others interested in the dynamics of stem freezing.

59 BASIC BIOLOGICAL SCIENCES↗

Exploring the concept of compressed air energy storage (CAES) in lined rock caverns at shallow depth: A modeling study of air tightness and energy balance

This paper presents a numerical modeling study of coupled thermodynamic, multiphase fluid flow and heat transport associated with underground compressed air energy storage (CAES) in lined rock caverns. Specifically, we explored the concept of using concrete lined caverns at a relatively shallow depth for which constructing and operational costs may be reduced if air tightness and stability can be assured. Our analysis showed that the key parameter to assure long-term air tightness in such a system was the permeability of both the concrete lining and the surrounding rock. The analysis also indicated that a concrete lining with a permeability of less than 1×10{sup -18} m{sup 2} would result in an acceptable air leakage rate of less than 1%, with the operational pressure range between 5 and 8 MPa at a depth of 100 m. It was further noted that capillary retention properties and the initial liquid saturation of the lining were very important. Indeed, air leakage could be effectively prevented when the air-entry pressure of the concrete lining is higher than the operational air pressure and when the lining is kept moist at a relatively high liquid saturation. Our subsequent energy-balance analysis demonstrated that the energy loss for a daily compression and decompression cycle is governed by the air-pressure loss, as well as heat loss by conduction to the concrete liner and surrounding rock. For a sufficiently tight system, i.e., for a concrete permeability off less than 1×10{sup -18} m{sup 2}, heat loss by heat conduction tends to become proportionally more important. However, the energy loss by heat conduction can be minimized by keeping the air-injection temperature of compressed air closer to the ambient temperature of the underground storage cavern. In such a case, almost all the heat loss during compression is gained back during subsequent decompression. Finally, our numerical simulation study showed that CAES in shallow rock caverns is feasible from a leakage and energy efficiency viewpoint. Our numerical approach and energy analysis will next be applied in designing and evaluating the performance of a planned full-scale pilot test of the proposed underground CAES concept.

54 ENVIRONMENTAL SCIENCES↗

Numerical investigation of a joint approach to thermal energy storage and compressed air energy storage in aquifers

Different from conventional compressed air energy storage (CAES) systems, the advanced adiabatic compressed air energy storage (AA-CAES) system can store the compression heat which can be used to reheat air during the electricity generation stage. Thus, AA-CAES system can achieve a higher energy storage efficiency. Similar to the AA-CAES system, a compressed air energy storage in aquifers (CAESA) system, which is integrated with an aquifer thermal energy storage (ATES) could possibly achieve the same objective. In order to investigate the impact of ATES on the performance of CAESA, different injection air temperature schemes are designed and analyzed by using numerical simulations. Key parameters relative to energy recovery efficiencies of the different injection schemes, such as pressure distribution and temperature variation within the aquifers as well as energy flow rate in the injection well, are also investigated in this study. The simulations show that, although different injection schemes have a similar overall energy recovery efficiency (~97%) as well as a thermal energy recovery efficiency (~79.2%), the higher injection air temperature has a higher energy storage capability. Our results show the total energy storage for the injection air temperature at 80 °C is about 10% greater than the base model scheme at 40 °C. Sensitivity analysis reveal that permeability of the reservoir boundary could have significant impact on the system performance. However, other hydrodynamic and thermodynamic properties, such as the storage reservoir permeability, thermal conductivity, rock grain specific heat and rock grain density, have little impact on storage capability and the energy flow rate. Our study suggests that the combination of ATES and CAESA can help keep the high efficiency of energy storage so as to make CAESA system more efficiency.

25 ENERGY STORAGE↗

Can classical DEM simultaneously capture compressibility and flowability of milled biomass?

Accurate prediction of the rheological behavior of biomass is essential for the design and operation of hoppers, feeders, and storage systems in biorefineries. This study examines whether the classical, coarse-grained discrete element method (DEM) formulation can simultaneously reproduce the compressibility and flowability of milled herbaceous biomass, using Miscanthus × giganteus as a representative material. The model represents particles as rigid spheres interacting through Hertz-Mindlin elastic-frictional contacts augmented with an area-dependent cohesion term. Laboratory cyclic compression and wedge-shaped hopper discharge experiments were used as calibration benchmarks. Although the model can independently reproduce each behavior by appropriately tuning particle Young's modulus E and cohesion energy density k, an extensive parametric investigation comprising more than 600 simulations reveals that the optimal parameter regions for compression and hopper flow are distinct and non-overlapping in (E, k) space. Surrogate surface analysis further shows that the corresponding objective-function valleys exhibit similar trends but are approximately parallel and spatially offset, precluding a unified calibration within the explored domain. Sensitivity analysis indicates that compressibility is governed predominantly by stiffness and cohesion, whereas the slope of the mass flow rate-opening relation in hopper discharge is primarily controlled by tangential friction. Extensions incorporating particle size distribution and clumped-sphere representations do not eliminate the incompatibility. These results systematically reveal, for the first time, the structural limitation of simplified DEM formulations in representing biomass rheological behavior, underscoring the necessity for models incorporating additional physical mechanisms, such as particle deformability or enhanced interlocking, to achieve unified predictive capability for biomass handling behavior.

09 BIOMASS FUELS↗

Compressive strength and hydration processes of concrete with recycled aggregates

This paper deals with the correlation between the time evolution of the degree of hydration and the compressive strength of Recycled Aggregate Concrete (RAC) for different water to cement ratios and initial moisture conditions of the Recycled Concrete Aggregates (RCAs). Particularly, the influence of such moisture conditions is investigated by monitoring the hydration process and determining the compressive strength development of fully dry or fully saturated recycled aggregates in four RAC mixtures. Hydration processes are monitored via temperature measurements in hardening concrete samples and the time evolution of the degree of hydration is determined through a 1D hydration and heat flow model. The effect of the initial moisture condition of RCAs employed in the considered concrete mixtures clearly emerges from this study. In fact, a novel conceptual method is proposed to predict the compressive strength of RAC-systems, from the initial mixture parameters and the hardening conditions. -- Highlights: •The concrete industry is more and more concerned with sustainability issues. •The use of recycled aggregates is a promising solution to enhance sustainability. •Recycled aggregates affect both hydration processes and compressive strength. •A fundamental approach is proposed to unveil the influence of recycled aggregates. •Some experimental comparisons are presented to validate the proposed approach.

42 ENGINEERING↗

A molecular dynamics investigation of hydrostatic compression characteristics of mineral Jennite

This paper focuses on the study of mechanical behavior and deformation of mineral Jennite, under isothermal hydrostatic compression using Molecular Dynamics (MD) modeling. Atomistic structure of mineral Jennite is considered as a choice for representing calcium silicate hydrate (C-S-H), a key constituent in hydrated cement paste. The present work focuses and presents a molecular dynamics simulation approach to ascertain hydrostatic compression characteristics of mineral Jennite. The pressure–specific volume, and specific internal energy–specific volume relationships under isothermal hydrostatic compression conditions were determined. For the pressures ranging from 0.0001 GPa to 5 GPa, computational modeling results indicated that a linear relationship may be sufficient when describing the pressure–specific volume relationship. The results obtained in this study compared well with experimental and theoretical results recently published by other researchers. Additionally, a quadratic function was found to be appropriate to describe the specific energy–specific volume relationship, for the same pressure range used for studying the pressure–specific volume relationship. The pressure–specific volume, and specific internal energy-specific volume relationships reported in this paper are useful for further estimation of pressure–specific volume constitutive Hugoniot of the nanoscale mineral Jennite. Additionally, MD approach discussed and presented in this paper can be applied to understand hydrostatic compression behavior and deformation characteristics of other atomistic structures representing C-S-H. Further, the computational material modeling approach discussed in this paper provides an alternative methodology that can aid in the understanding of the deformation mechanisms and developing constitutive relationships from atomistic structures of materials.

36 MATERIALS SCIENCE↗

Towards efficient backward-in-time adjoint computations using data compression techniques

In the context of a posteriori error estimation for nonlinear time-dependent partial differential equations, the state-of-the-practice is to use adjoint approaches which require the solution of a backward-in-time problem defined by a linearization of the forward problem. One of the major obstacles in the practical application of these approaches, we found, is the need to store, or recompute, the forward solution to define the adjoint problem and to evaluate the error representation. Our study considers the use of data compression techniques to approximate forward solutions employed in the backward-in-time integration. The development derives an error representation that accounts for the difference between the standard-approach and the compressed approximation of the forward solution. This representation is algorithmically similar to the standard representation and only requires the computation of the quantity of interest for the forward solution and the data-compressed reconstructed solution (i.e. scalar quantities that can be evaluated as the forward problem is integrated). This approach is then compared with existing techniques, such as checkpointing and time-averaged adjoints. Lastly, we provide numerical results indicating the potential efficiency of our approach on a transient diffusion–reaction equation and on the Navier–Stokes equations. These results demonstrate memory compression ratios up to 450×450× while maintaining reasonable accuracy in the error-estimates.

42 ENGINEERING↗

Effects of radiation and compression on propagating spherical flames of methane/air mixtures near the lean flammability limit

Large discrepancies between the laminar flame speeds and Markstein lengths measured in experiments and those predicted by simulations for ultra-lean methane/air mixtures bring a great concern for kinetic mechanism validation. In order to quantitatively explain these discrepancies, a computational study is performed for propagating spherical flames of lean methane/air mixtures in different spherical chambers using different radiation models. The emphasis is focused on the effects of radiation and compression. It is found that the spherical flame propagation speed is greatly reduced by the coupling between thermal effect (change of flame temperature or unburned gas temperature) and flow effect (inward flow of burned gas) induced by radiation and/or compression. As a result, for methane/air mixtures near the lean flammability limit, the radiation and compression cause large amounts of under-prediction of the laminar flame speeds and Markstein lengths extracted from propagating spherical flames. Since radiation and compression both exist in the experiments on ultra-lean methane/air mixtures reported in the literature, the measured laminar flame speeds and Markstein lengths are much lower than results from simulation and thus cannot be used for kinetic mechanism validation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CFD simulations of Rapid Compression Machines using detailed chemistry: Evaluation of the ‘crevice containment’ concept

The use of creviced pistons in Rapid Compression Machines (RCMs) has proven to be very effcient in making the temperature homogeneous inside the reaction chamber but has the disadvantage of inducing a mass transfer from the reaction chamber to the crevice, especially during the preliminary heat release of two- stage ignition processes. Aiming to mitigate this mass transfer, the technique of `crevice containment' (CC) has been proposed. It consists of a physical separa- tion between the reaction chamber and the crevice region that is engaged at the end of the compression, physically preventing any mass transfer between both parts of the geometry. In order to numerically assess this novel design concept across a broader range of conditions than previously investigated, reactive simu- lations using detailed chemical kinetic mechanisms are performed for n-heptane and iso-octane. For compressed temperatures outside of the NTC (negative temperature coeffcient) region, the CC approach is very effective in suppress- ing the influence of the crevice mass transfer and thus increases the validity of the widely-used 0-D model based on the adiabatic core assumption. Still, for most of the temperature cases inside the NTC region, the ignition appears to be precipitately initiated in the residual vortex region formed after the seal engagement, possibly inducing very significant differences with the 0-D model. The benefits of eliminating the post-compression crevice mass transfer appear to be counter-balanced by effects that have not been previously investigated in detail.

42 ENGINEERING↗