Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CH4”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Observation and Attribution of Temperature Trends near the Stratopause from HALOE

This study considers time series of temperature versus pressure, T(p), from the Halogen Occultation Experiment (HALOE) across the stratopause region, where the effects of radiative forcings from the greenhouse gases (CO2 and H2O) and from ozone are most pronounced. Trend analyses are from 1993-2005 for HALOE T(p) values at seven levels from 3.0 to 0.3 hPa with a vertical resolution of about 4 km and for eight latitude zones from 65°S to 65°N. The HALOE trends at 2.0 hPa are of the order of -1.0 K/decade across the tropics and subtropics, but then become smaller (-0.5 K/decade) at the middle latitudes. The near-global HALOE trend profile has a minimum cooling rate of -0.2 K/decade at 1.0 hPa, although it is more negative in the southern hemisphere and slightly positive in the northern hemisphere. The combined radiative forcings from CO2, H2O, and ozone are from -0.4 to -0.6 K/decade for 1993-2005 and are hemispherically symmetric. HALOE temperature trend and total radiative cooling profiles differ from those reported from observations and calculations for 1980-2000, mainly because the ozone trends changed from clearly negative in the 1980s through mid-1990s to slightly positive during the time of HALOE. Trends for the tracer, HALOE methane (CH4), increase from 2 to 4 %/decade from 50 hPa to 10 hPa, indicating an acceleration of the Brewer/Dobson circulation. Analyses of time series of CH4 across the stratopause reveal more variability in the northern hemisphere, where wave dissipation likely contributes to the heating.

Remsberg, Ellis↗

Quantifying Methane Leak Emissions by Fused Airborne Imaging Spectroscopy with in Situ Surface Mobile and Airborne Observations of a California Producing Oil Field

Methane (CH4) emission budgets remain uncertain and are projected to grow as oil and gas production from short-lived wells increases and their subsequent transport through aging gas distribution networks. Orders-of-magnitude variations in temporal, spatial, and emission scales present a key challenge to leak detection and quantification. Also, the probability distributions for large and stochastic, leaky systems such as geological reservoirs (by natural migration-seeps) and petroleum production from those reservoirs remain largely unknown, needed to address current approach limitations. The scale of many petroleum systems favors remote sensing, but the sensitivity of such systems often precludes detection of weak emissions. Consequently, an accurate evaluation requires that the relative contribution from the emission "tails" of small leaks also be quantified, which is best carried out using high-sensitivity in situ methods. Fusion of remote sensing and in situ approaches leverages complementary capabilities to address these limitations. We show results from mobile surface (AMOG) and airborne in situ (AJAX) and thermal-infrared (TIR) hyperspectral imaging spectroscopy (Mako) data applied to a producing oil field in the California Central Valley near Bakersfield. AMOG is an automobile-based mobile lab that measures 13 trace gases, aerosol size distributions and vertical profiles, 3D winds and other meteorology, and atmospheric column measurements by solar spectroscopy at highway speeds. AJAX measures 5 trace gases and 3D winds at ~140 m/s. Mako is a broad-area TIR imaging spectrometer that can discriminate multiple gases present in each pixel acquired. In situ-derived, total field emissions were 31±16 Gg/yr CH4. This was compared with Mako-derived emissions from all plumes identified across the study site. We found that super-emitters were not the dominant emissions mode and the spatial pattern of plume locations from production infrastructure was correlated to geological structures.

Leifer, Ira↗

Detection Opportunity for Aromatic Signature in Titan's Aerosols in the 4.1-5.3 μm Range

The Cassini/Huygens mission provided new insights on the chemistry of the upper atmosphere of Titan. The presence of large molecules and ions (>100's of amu) detected by Cassini at high altitude was not expected, and questions the original assumptions regarding the aerosol formation pathways. From recent laboratory studies, it has been shown that the inclusion of trace amounts of aromatic species drastically impacts the chemistry of aerosol formation and induces observable changes in the properties of the aerosols. In this Letter we focus on the effect of one of the simplest nitrogenous aromatics, pyridine (C5H5N), on the infrared signature of Titan's aerosol analogs. We introduce initial gas mixtures of (i) N2–C5H5N (100%/250 ppm), (ii) N2–CH4–C5H5N (99%/1%/250 ppm), and (iii) N2–CH4 (99%/1%) in a cold plasma discharge. The material produced, herein called tholins, is then analyzed by mid-infrared spectroscopy. When adding pyridine in the discharge, the tholins produced present an aromatic signature in the 4.1–5.3 μm (1850–2450 cm−1) spectral region, attributed to overtones of aromatic C–H out-of-plane bending vibrations. We also observe a spectral shift of the nitrile and iso-nitrile absorption band with the inclusion of pyridine in the gas mixture. These results could help to investigate the data obtained at Titan by the Cassini/Visual and Infrared Mapping Spectrometer (VIMS) instrument in the 1–5 μm infrared window.

Mathé, Christophe↗

Validation of the Aeroplanets Model in a Present-Day Earth Simulation

We present a validation of the Aeroplanets/Aerochemistry model (Gronoff et al. 2012; Airapetian et al. 2016), a one-dimensional photochemistry model, with another one-dimensional photochemistry model implemented in Hu et al. 2016. Results from a simulation of the atmosphere of present-day Earth from both models were used in the validation. Realistic initial conditions and concentrations were used in the validation, including surface emissions of CO, CH4, NH3, N2O, NO, SO2, OCS, H2S, and H2SO4. As part of the validation, we compare the vertical profile of concentration of key chemical species, including O3, N2O, NO, NO2, HNO3, HO2, OH, and CH4. Our model was able to create vertical concentration profiles of these species that closely matched the results from Hu et al. 2016. With the successful validation, we plan to use the Aeroplanets model to explore the role of ions and aerosols, formed the interaction of solar energetic particles and the atmosphere of early Earth, in generating key greenhouse gas species and gas species that support the formation of molecules crucial for life.

Bradley Michael Hegyi↗

Characterization of Cosmic Grain Analogs Formed at Low Temperature from Small Hydrocarbon Precursors in the NASA Ames COSmIC Facility

Here, we present the results of the first solid-phase ex situ analysis of cosmic grain analogs produced at low temperature (<200 K) in the NASA Ames COsmic SImulation Chamber (COSmIC) from small hydrocarbon precursors, methane (CH4) and acetylene (C2H2), seeded in an argon supersonic jet expansion and submitted to a plasma discharge. The plasma-induced chemical reactions, initiated between the precursor molecules and their atomic and molecular fragments, radicals and ions, produce larger molecules and eventually solid particles that are collected in situ under controlled conditions. Scanning electron microscopy (SEM) imaging was used to provide insight on the morphology and growth structure of the grains produced in COSmIC, and to investigate how the precursors used to produce the grains affect these parameters. This SEM study has shown that under identical experimental conditions with fixed physical and chemical parameters (precursor density, temperature, energy, and reaction time), heavier precursors in the initial mixture produce larger grains and in larger quantity, most likely as a result of a more complex chemistry: most of the grains produced in the Ar/CH4 (95:5) gas mixture ranged from 15 to 385 nm in diameter with an average density of 2.1 grains per sq.μm, while the grains produced in the Ar/C2H2 (95:5) gas mixture ranged from 40 to 650 nm with a density of 3.5 grains per sq.μm. Changes in the morphology were also observed, with grains produced from acetylene (C2H2) precursors tending to be more spherical than grains produced from methane (CH4) precursors. This change in morphology could be associated with different stages of growth formation at low temperature from a more "planar" growth at first, followed by coagulation into more spherical particles. This study demonstrates that the COSmIC experimental setup can be used to investigate carbon grain formation from small gas-phase molecular precursors at low temperature (<200 K), i.e., under a temperature regime that is representative of the dust condensation zone and outer region of circumstellar envelopes.

Ella Sciamma-O'Brien↗

Did a Complex Carbon Cycle Operate in the Inner Solar System?

Solids in the interstellar medium consist of an intimate mixture of silicate and carbonaceous grains. Because 99% of silicates in meteorites were reprocessed at high temperatures in the inner regions of the Solar Nebula, we propose that similar levels of heating of carbonaceous materials in the oxygen-rich Solar Nebula would have converted nearly all carbon in dust and grain coatings to CO. We discuss catalytic experiments on a variety of grain surfaces that not only produce gas phase species such as CH4, C2H6, C6H6, C6H5OH, or CH3CN, but also produce carbonaceous solids and fibers that would be much more readily incorporated into growing planetesimals. CH4 and other more volatile products of these surface-mediated reactions were likely transported outwards along with chondrule fragments and small Calcium Aluminum-rich Inclusions (CAIs) to enhance the organic content in the outer regions of the nebula where comets formed. Carbonaceous fibers formed on the surfaces of refractory oxides may have significantly improved the aggregation efficiency of chondrules and CAIs. Carbonaceous fibers incorporated into chondritic parent bodies might have served as the carbon source for the generation of more complex organic species during thermal or hydrous metamorphic processes on the evolving asteroid.

Joseph A Nuth↗

A permafrost implementation in the simple carbon-climate model Hector v.2.3.pf

Permafrost currently stores more than a fourth of global soil carbon. A warming climate makes this carbon increasingly vulnerable to decomposition and release into the atmosphere in the form of greenhouse gases. The resulting climate feedback can be estimated using land surface models, but the high complexity and computational cost of these models make it challenging to use them for estimating uncertainty, exploring novel scenarios, and coupling with other models. We have added a representation of permafrost to the simple, open-source global carbon–climate model Hector, calibrated to be consistent with both historical data and 21st century Earth system model projections of permafrost thaw. We include permafrost as a separate land carbon pool that becomes available for decomposition into both methane (CH4) and carbon dioxide (CO2) once thawed; the thaw rate is controlled by region-specific air temperature increases from a preindustrial baseline. We found that by 2100 thawed permafrost carbon emissions increased Hector’s atmospheric CO2 concentration by 5 %–7 % and the atmospheric CH4 concentration by 7 %–12 %, depending on the future scenario, resulting in 0.2–0.25 ∘C of additional warming over the 21st century. The fraction of thawed permafrost carbon available for decomposition was the most significant parameter controlling the end-of-century temperature change in the model, explaining around 70 % of the temperature variance, and was distantly followed by the initial stock of permafrost carbon, which contributed to about 10 % of the temperature variance. The addition of permafrost in Hector provides a basis for the exploration of a suite of science questions, as Hector can be cheaply run over a wide range of parameter values to explore uncertainty and can be easily coupled with integrated assessment and other human system models to explore the economic consequences of warming from this feedback.

Dawn L. Woodard↗

Volatile Composition and Outgassing in C/2018 Y1 (Iwamoto): Extending Limits for High-Resolution Infrared Cometary Spectroscopy between 2.8 and 5.0 µm

We used the powerful high spectral resolution cross-dispersed facility spectrograph, iSHELL, at the NASAInfrared Telescope Facility(IRTF)to observe C/2018 Y1(Iwamoto), a long-period comet from the Oort cloud.We report production rates for water and eight other parent molecules(native ices),C2H6, CO, CH4,H2CO,CH3OH, HCN, NH3, and C2H2, on three preperihelion UT dates, 2019 January 13 and(near perihelion)February4–5. We present abundance ratios relative to both C2H6(a nonpolar molecule)and H2O(a polar molecule), thereby providing a more complete picture of the parent volatile composition of C/2018 Y1 and potential associations of ices in its nucleus. Overall, the measured spatial distributions for polar molecules(in particular, H2O and CH3OH)were broader, exhibiting more complex structure compared with nonpolar or weakly polar species(CH4,C2H6, andCO). Our January 13 results permitted quantitatively assessing the significant improvement in sensitivity delivered by iSHELL compared with previous capabilities at the IRTF. The efficient spectral coverage of iSHELL plus the favorable geocentric Doppler shift of C/2018 Y1 allowed for measuring>50% of CH4ν3-band emission intensity on both January 13 and February 5. Compositionally, compared to their respective mean abundances among comets from the Oort cloud, C2H6and CH3OH were enriched, CH4and HCN were near normal, and all other species were depleted. The abundance ratio CH3OH/C2H6was higher by 45%±8% on January 13 versusFebruary 5, whereas CH4/C2H6was unchanged within the uncertainty, suggesting nonhomogeneous composition among regions of the nucleus dominating activity on these dates

Michael A. Disanti↗

Volatile Abundances, Extended Coma Sources, and Nucleus Ice Associations in Comet C/2014 Q2 (Lovejoy)

High-resolution infrared spectra of comet C/2014 Q2 Lovejoy were acquired with NIRSPEC at the W. M. Keck Observatory on two post-perihelion dates(UT 2015 February 2 and 3).H2O was measured simultaneously with CO,CH3OH, H2CO, CH4, C2H6,C2H4, C2H2, HCN, and NH3 on both dates, and rotational temperatures, production rates, relative abundances, H2O ortho-to-para ratios, and spatial distributions in the coma were determined. The first detection of C2H4in a comet from ground-based observations is reported. Abundances relative to H2O for all species were found to be in the typical range compared with values for other comets in the overall population to date. There is evidence of variability in rotational temperatures and production rates on timescales that are small compared with the rotational period of the comet. Spatial distributions of volatiles in the coma suggest complex outgassing behavior.CH3OH, HCN, C2H6, and CH4 spatial distributions in the coma are consistent with direct release from associated ices in the nucleus and are peaked in a more sunward direction compared with co-measured dust. H2O spatial profiles are clearly distinct from these other four species, likely due to a sizable coma contribution from icy grain sublimation.Spatial distributions for C2H2,H2CO, and NH3suggest substantial contributions from extended coma sources, providing further evidence for distinct origins and associations for these species in comets. CO shows a different spatial distribution compared with other volatiles, consistent with jet activity from discrete nucleus ice sources.

Neil Dello Russo↗

TROPOMI Methane Validation in the GeoCarb Domain

Objective: GeoCarb validation •Purpose: •Do the four TCCON sites in the GeoCarb domain characterize satellite validation? •Method: •Assess the error estimates globally vs. in the GeoCarb domain •Assess the use of GML/DOE aircraft for CH4 validation •Systematic error estimate (from Kulawik, 2016): •+ regional bias (stdevof average bias versus validation at each station) •+ correlated error (stdev of daily average versus validation) •-co-location error (above quantities for model@satelliteminus model@valid) •-validation error (systematic error of validation estimates, e.g. model extension) Aircraft validation error •CH4 profile extension error estimate: 7 ppb •Extend aircraft observations to the top of the atmosphere with different model configurations •CAMS, scaling to stratosphere, then taking stratosphere •Extend by repeating top aircraft value to the troposphere, then taking CAMS •Extend with GEOS-Chem run (from 2010). •Difference CAMS-Scale vs. CAMS-Tropo: •3.6 +-5.5 ppb •Systematic error: 6.6 ppb •Extending aircraft to tropopause is blatantly wrong, but these two have the same stratosphere. •Difference CAMS-Scale vs. GEOS-Scale: •6.2 +-8.7 ppb •Do not consider bias since model is 10 years off. Systematic error ~8.7 ppb. •Estimate of systematic error from profile extension (possibly underestimated, resulting in possibly higher TROPOMI error estimate) •7 ppb •Would likely vary some by season, site, other conditions •Aircraft measurement error: 1 ppb •1 ppb from measurement error3

TROMPOMI↗

The INSTEP Monitoring Network: Merging High-and-Low Cost Measurements to Characterize California Wildfires

Despite challenges with data quality and scope, low-cost sensor networks have skyrocketed in popularity over the last 15 years, making air quality data available on refined spatial scales. More recently, studies have leveraged both high and low-quality instruments to create stronger “hybrid” models, with most studies focusing on particulate matter. Low-cost measurements typically represent ground-level emissions only, providing context for human health issues from climate change-driven events such as wildfires. Since low-cost sensors’ capabilities are localized, daily events and microclimates tend to dominate the data rather than larger regional or atmospheric trends. Likewise, their low cost explains their high uncertainty. In contrast, some regulatory-grade instruments produce column measurements as well, providing reliable information on a broader scope. To bridge this gap while expanding into gas-phase measurements, we deployed 12 air quality sensor packages in California, USA during the 2022 wildfire season. These INSTEP (Inexpensive Network Sensor Technology Exploring Pollution) monitors measure carbon monoxide (CO), carbon dioxide (CO2), ozone (O3), nitrogen dioxide (NO2), and several hydrocarbons including methane (CH4) and formaldehyde (HCHO). Half of the monitors were co-located with remote sensing spectrometers: NASA Pandora and Total Column Carbon Observing Network (TCCON). The overlap in pollutants includes NO2, O3, and HCHO between the INSTEP monitors and the Pandora column measurements. TCCON covers column CO, CO2, and CH4, rounding out our comparison. Most of the monitors were distributed throughout the San Francisco Bay area, and an additional three were located within 100 km of Los Angeles. The sites ranged in geographic and population characteristics, including desert, mountainous, coastal, and urban locations. Since varying environmental conditions such as temperature and pressure are known to challenge sensor performance, we will apply newer sensor “calibration” techniques meant to combat this. We will normalize our sensor signals by z-scoring them prior to applying a single calibration model in the form of multivariate linear regression or an artificial neural network. While this technique has been validated for the hydrocarbon and ozone sensor types (metal oxide), it has not yet been tested on electrochemical and non-dispersive infrared sensors, which are also used in the INSTEP monitors. This will serve as a test to see if this normalization technique – or another – is most effective in accounting for environmental differences among sensors. Related data analysis efforts have found success with a variety of geospatial analysis techniques, including weighted network models in which high-quality instruments are given higher weights than their low-cost counterparts. Our preliminary analysis will focus on kriging, which uses a Gaussian algorithm to assign weights, providing estimated pollution levels at locations between monitors. Smoke trajectory and evolution will also be considered using both measurement types. We also aim to baseline subtract our emission estimates from each region to determine which portion of emissions are regional and local, further characterizing burn differences in northern and southern California fires. Future directions include using INSTEP jointly with TEMPO satellite data, and mobile deployments on aircraft and uncrewed aerial vehicles (UAV).

Low-cost sensors↗

Ensemble Forecasting/Assimilation/Emissions Estimation with WRF-Chem/DART: Accomplishments, Lessons Learned, and Future Plans

Over the past ten years, we have been conducting research on regional ensemble atmospheric composition forecasting/data assimilation/emissions estimation with WRF-Chem/DART. WRF- Chem/DART integrates the Weather Research and Forecasting model (WRF) with online chemistry (WRF-Chem) into the Data Assimilation Research Testbed (DART). DART is an ensemble data assimilation system based on the ensemble adjustment Kalman filter (EAKF) with adaptive inflation, localization (physical and state space), and an optional non-Gaussian formulation of the EAKF. DART includes assimilation of meteorological and limited chemical observations. WRF-Chem/DART extends DART to include assimilation of: MOPITT CO; IASI CO and O3; MODIS AOD; OMI O3, NO2, and SO2; TROPOMI CO, O3, NO2, and SO2, TES CO, CO2 (research mode), O3, NH3, and CH4 (research mode); CrIS CO, O3, NH3, CH4 (research mode), and PAN; SCIAMACHY NO2; GOME2a NO2; MLS O3 and HNO3; and proxy TEMPO O3, and NO2 satellite retrievals as raw retrievals or as ‘compact phase space retrievals’ (CPSRs) for profile retrievals. WRF-Chem/DART also assimilates in situ atmospheric composition measurements and uses the ‘state augmentation method’ for emissions estimation. In our presentation, we will provide an overview of WRF-Chem/DART: • applications and results; • lessons learned from: (i) independent versus joint assimilation; (ii) total/partial column versus profile retrieval assimilation; (iii) joint in situ and retrieval assimilation; (iv) assimilation at grid resolutions ranging from 100 km to 4 km; (v) dynamic emissions estimation; and • future work related to wildfire emissions estimation and intercomparison of CMAQ (online)/JEDI and CMAQ (online and offline)/DART.

WRF-Chem/DART↗

The Temporal Brightening of Uranus’ Northern Polar Hood from HST/WFC3 & HST/STIS Observations

Hubble Space Telescope Wide-Field Camera 3 (HST/WFC3) observations spanning 2015 to 2021 confirm a brightening of Uranus' north polar hood feature with time. The vertical aerosol model of Irwin et al. (2023, https://doi.org/10.1038/s41550-023-02047-0) (IRW23), consisting of a deep haze layer based at ∼5 bar, a 1–2 bar haze layer, and an extended haze rising up from the 1–2 bar layer, was applied to retrievals on HST Space Telescope Imaging Spectrograph (STIS) (HST/STIS) observations (Sromovsky et al., 2014, 2019, https://doi.org/10.1016/j.icarus.2014.05.016, https://doi.org/10.1016/j.icarus.2018.06.026) revealing a reduction in cloud-top CH4 volume mixing ratio (VMR) (i.e., above the deep ∼5 bar haze) by an average of 0.0019 ± 0.0003 between 40–80◦N (∼10% average reduction) from 2012 to 2015. A combination of latitudinal retrievals on the HST/WFC3 and HST/STIS data sets, again employing the IRW23 model, reveal a temporal thickening of the 1–2 bar haze layer to be the main cause of the polar hood brightening, finding an average increase in integrated opacity of 1.09 ± 0.08 (∼33% increase) at 0.8 µm north of ∼45°N, concurrent with a decrease in the imaginary refractive index spectrum of the 1–2 bar haze layer north of ∼40°N and longwards of ∼0.7 µm. Small contributions to the brightening were found from a thickening of the deep aerosol layer, with an average increase in integrated opacity of 0.6 ± 0.1 (58% increase) north of 45°N between 2012 and 2015, and from the aforementioned decrease in CH4 VMR. Our results are consistent with the slowing of a stratospheric meridional circulation, exhibiting subsidence at the poles.

Arjuna James↗

Surface Volatile Composition as Evidence for Hydrothermal Processes Lasting Longer in Triton’s Interior than Pluto’s

Ocean worlds, or icy bodies in the outer solar system that have or once had subsurface liquid water oceans, are among the most compelling topics of astrobiology. Typically, confirming the existence of a subsurface ocean requires close spacecraft observations. However, combining our understanding of the chemistry that takes place in a subsurface ocean with our knowledge of the building blocks that formed potential ocean worlds provides an opportunity to identify tracers of endogenic activity in the surface volatiles of Pluto and Triton. We show here that the current composition of the volatiles on the surfaces and in the atmospheres of Pluto and Triton are deficient in carbon, which can only be explained by the loss of CH4 through a combination of aqueous chemistry and atmospheric processes. Furthermore, we find that the relative nitrogen and water abundances are within the range observed in building block analogs, comets, and chondrites. A lower limit for N/Ar in Pluto's atmosphere also suggests source building blocks that have a cometary or chondritic composition, all pointing to an origin for their nitrogen as NH3 or organics. Triton's lower abundance of CH4 compared to Pluto, and the detection of CO2 at Triton but not at Pluto points to aqueous chemistry in a subsurface ocean that was more efficient at Triton than Pluto. These results have applications to other large Kuiper Belt objects as well as the assessment of formation locations and times for the four giant planets given future probe measurements of noble gas abundances and isotope ratios.

Solar system formation↗

Converter/Compressor Building Solid Waste Management Unit (SWMU) #89 Monitoring Well 21 Area Interim Measure Work Plan

This Work Plan details the approach and design for the Interim Measure (IM) to remediate groundwater within the MW21 Area where VOC concentrations exceed Florida Department of Environmental Protection Natural Attenuation Default Concentrations. The IM includes in-situ bioremediation via injection of emulsified vegetable oil (EVO) and emulsified zero-valent iron (EZVI). The in-situ bioremediation technology consists of injecting an electron donor substrate into the subsurface to promote microbial breakdown of VOCs. The EVO injections for this IM are designed based on the use of Provectus ERD-CH4, which is a vegetable oil/carbon substrate mixture. The EZVI injections for this IM are designed based on the use of Provectus EZVI-CH4. The IM treatment layout consists of nine injection locations of EVO at approximately 10-foot radius of influence (ROI) and three injections locations of EZVI at approximately 6-foot ROI. The injection method will be direct push using a DPT rig. The overall injection depths range from 7 to 17 ft bls. The 7 ft bls top depth is designed to be 2 ft below the water table to prevent substrates from reaching the top of the water table. Injections are planned to be implemented using 2 ft intervals and will take place using a bottom-up approach to 2 ft below the water table. This work plan further describes the IM design, injection calculations, performance monitoring plan, and provides an injection layout. Revision 1 of this Work Plan includes quarterly performance sampling during Year 1 in accordance with F.A.C. 62-780. These changes are reflected in Section 7 and Table 2 of the Work Plan.

Mark J Jonnet↗

CFD Validation of a Methanation Reactor With Cooling Jacket Used in an ISRU Propellant Production System

A digital model of an OxEon Energy methanation reactor (with a cooling jacket) planned for use in a NASA designed In-Situ Resource Utilization (ISRU) propellant production system was developed by the UTEP Aerospace Center using STAR-CCM+ software, a Siemens Computational Fluid Dynamics (CFD) package. The reactor digital model created includes two primary components: (i) a cooling jacket that maintains the required reactor chamber surface temperature and (ii) a reactor core chamber where the exothermic methanation reactions occur. The StarCCM+ digital model has two objectives: (i) maintain the surface temperature of the reactor below a set value so that the extra heat accumulation does not melt or crack the chamber, and (ii) produce the desired amount of methane (CH4) according to test cases completed by OxEon Energy for NASA JSC. The computational digital model was validated with the test data enabling the cooling jacket scale to be predicted based on the reactor's operating temperature. The StarCCM+ simulation of the digital model shows a good agreement with the cooling jacket performance and the CH4 production. One test case for the cooling jacket maintained the reactor wall temperature around 310 °C was validated and the reactor produced 185 g/hr CH 4 .

ISRU↗

BETO 2021 Peer Review - Biomethanation to Upgrade Biogas to Pipeline Grade Methane WBS 5.1.3.102

We are developing, innovating and de-risking a biomethanation process capable of megawatt-scale deployment that upgrades biogas waste streams to produce pipeline quality renewable natural gas (RNG). Biomethanation is a two-step process using a methanogenic microorganism to convert renewable hydrogen (H2) and waste carbon dioxide (CO2) to renewable methane (CH4) - the primary component in natural gas. Using biogenic CO2 from biogas sources like dairies, wastewater treatment plants, and landfills allows production of this drop-in direct replacement fuel to participate in the growing number of carbon markets; like California's Low Carbon Fuel Standard and the Federal Renewable Fuel Standard. The end-of-project goal is to demonstrate pipeline quality RNG production (> 95% CH4, < 4% H2, <1% CO2, < 0.2% O2 and < 4 parts per million hydrogen sulfide) using real biogas feedstocks. We will accomplish this goal by designing and building a pressurized (18 bar) mobile lab-scale (20L) bioreactor research platform, including integrated electrolyzer system, based on lessons learned from operating the 700L pilot system from Southern California Gas Company. In collaboration with Electrochaea, natural gas utilities and Argonne National lab, will provide the data to establish a preliminary range of carbon intensity to help accelerate the deployment of utility-scale H2 production and qualify the biomethanation pathway process for RNG production.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Permafrost Carbon: Progress on Understanding Stocks and Fluxes Across Northern Terrestrial Ecosystems

Significant progress in permafrost carbon science made over the past decades include the identification of vast permafrost carbon stocks, the development of new pan-Arctic permafrost maps, an increase in terrestrial measurement sites for CO 2 and methane fluxes, and important factors affecting carbon cycling, including vegetation changes, periods of soil freezing and thawing, wildfire, and other disturbance events. Process-based modeling studies now include key elements of permafrost carbon cycling and advances in statistical modeling and inverse modeling enhance understanding of permafrost region C budgets. By combining existing data syntheses and model outputs, the permafrost region is likely a wetland methane source and small terrestrial ecosystem CO 2 sink with lower net CO 2 uptake toward higher latitudes, excluding wildfire emissions. For 2002–2014, the strongest CO2 sink was located in western Canada (median: -52 g C m -2 y -1 ) and smallest sinks in Alaska, Canadian tundra, and Siberian tundra (medians: -5 to -9 g C m -2 y -1 ). Eurasian regions had the largest median wetland methane fluxes (16–18 g CH4 m -2 y -1 ). Quantifying the regional scale carbon balance remains challenging because of high spatial and temporal variability and relatively low density of observations. More accurate permafrost region carbon fluxes require: (a) the development of better maps characterizing wetlands and dynamics of vegetation and disturbances, including abrupt permafrost thaw; (b) the establishment of new year-round CO 2 and methane flux sites in underrepresented areas; and (c) improved models that better represent important permafrost carbon cycle dynamics, including non-growing season emissions and disturbance effects.

54 ENVIRONMENTAL SCIENCES↗