Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAPACITANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Driving frequency effects on the characteristics of atmospheric pressure capacitive helium discharge

Atmospheric pressure helium discharge characteristics were investigated for varying driving radio frequencies in the range between 1.86 and 27.1 MHz. As the driving frequency is raised, both gas breakdown and {alpha}-{gamma} transition voltages decrease due to the reduction in the electron drift loss. In addition, different discharge features such as normal, abnormal, {alpha}, and {gamma} modes show certain dependences on the frequency. Using a simple circuit model, the changes in sheath thickness from 2.35 to 0.11 mm, electron density from 0.26 to 15.6x10{sup 11} cm{sup -3} was obtained by raising the frequency from 1.86 to 27.1 MHz.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron heating in radio-frequency capacitively coupled atmospheric-pressure plasmas

In atmospheric-pressure plasmas the main electron heating mechanism is Ohmic heating, which has distinct spatial and temporal evolutions in the {alpha} and {gamma} modes. In {gamma} discharges, ionizing avalanches in the sheaths are initiated not only by secondary electrons but also by metastable pooling reactions. In {alpha} discharges, heating takes place at the sheath edges and in contrast with low-pressure plasmas, close to 50% of the power absorbed by the electrons is absorbed at the edge of the retreating sheaths. This heating is due to a field enhancement caused by the large collisionality in atmospheric-pressure discharges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron avalanches and diffused {gamma}-mode in radio-frequency capacitively coupled atmospheric-pressure microplasmas

Space-, time- and wavelength-resolved optical emission profiles suggest that the helium emission at 706 nm can be used to indicate the presence of high energy electrons and estimate the sheath in helium rf discharges containing small concentration of air impurities. Furthermore, the experimental data supports the theoretical predictions of energetic electron avalanches transiting across the discharge gap in rf microdischarges and the absence of an {alpha}-mode. Nonetheless, microdischarges sustained between bare metal electrodes and operating in the {gamma}-mode can produce diffuse glowlike discharges rather than the typical radially constricted plasmas observed in millimeter-size rf atmospheric-pressure {gamma} discharges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of the resonant growth of harmonics on the electron density in capacitively coupled plasma

The growth of harmonics is known to occur under the condition of plasma series resonance (PSR). In an actual plasma process chamber, the external circuit also affects the PSR. We experimentally demonstrated the resonant growth of the third and fourth harmonics by tuning a variable capacitor attached to the electrode, and investigated the influence of the growth on the electron density. We observed significant increases in electron density as the amplitude of harmonics grows. The result clearly shows that nonlinear electron resonance heating actually takes place.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Powder formation in SiH{sub 4}-H{sub 2} discharge in large area capacitively coupled reactors: A study of the combined effect of interelectrode distance and pressure

One of the main challenges for silicon thin film deposition for solar cell applications is to achieve high rate deposition in order to reduce the manufacturing costs. However, when silane and hydrogen are used as precursor gas in parallel plate plasma-enhanced chemical vapor deposition, high rate deposition is generally synonymous of powdery discharge. In this work, time- and space-resolved light scattering experiments are presented. These were performed in an industrial-type large area reactor with a variable interelectrode distance. Results show that with a standard 25 mm interelectrode distance, the fraction of silane transformed into powder can be as high as 50% and that reducing the interelectrode distance shifts to higher pressure the appearance of powder in the discharge. From a standard 25 mm interelectrode distance to a 10 mm narrow gap reactor, the threshold pressure was increased from 2 to 7 mbars. More generally, it is proposed that the onset of powder formation depends mainly on the product of the interelectrode distance and the gas residence time in the discharge.

36 MATERIALS SCIENCE↗

Influence of inhomogeneous magnetic field on the characteristics of very high frequency capacitively coupled plasmas

The effect of inhomogeneous magnetic field on the spatial structure of very high frequency (VHF) plasmas is investigated for different coil configurations, gas pressures, high frequency bias powers, and degrees of electronegativity. The simulation results show that the electron density peaks in the center of the chamber for VHF plasmas due to the standing electromagnetic wave effect. On application of a magnetic field, the density increases near the wafer edge and decreases at the chamber center. The radial magnetic field component is found to limit electron loss to the electrodes and locally enhance the electron density. The axial magnetic field component limits plasma diffusion in the radial direction helping preserve the effect of improved electron confinement by the radial magnetic field. The peak electron density decreases with increasing magnetic field as the plasma moves toward the electrode edge occupying a larger volume. The effect of magnetic field becomes weaker at higher pressure due to the increased electron-neutral collisions which reduce the effectiveness of electron confinement around the magnetic field lines. The impact of magnetic field on plasma profile is somewhat weaker in an electronegative Ar/CF{sub 4} plasma because of the presence of less mobile and unmagnetized negative ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Unraveling dielectric and electrical properties of ultralow-loss lead magnesium niobate titanate pyrochlore dielectric thin films for capacitive applications

PbO-MgO-Nb{sub 2}O{sub 5}-TiO{sub 2} (PMNT) pyrochlore thin films were prepared on Pt-coated silicon substrates by radio-frequency magnetron sputtering and postdeposition annealing method. Very interestingly, these pyrochlore-structured PMNT thin films exhibited ultralow dielectric losses, with a typical loss tangent as low as 0.001, and relatively high dielectric constants, typically {epsilon}{sub r{approx}}170. It was found that the relative permittivity slightly but continuously increased upon cooling without any signature of a structural phase transition, displaying a quantum paraelectriclike behavior; meanwhile, the PMNT pyrochlore thin films did not show any noticeable dielectric dispersion in the real part of permittivity over a wide temperature range (77-400 K). Their dielectric responses could, however, be efficiently tuned by applying a dc electric field. A maximum applied bias field of 1 MV/cm resulted in a {approx}20% tunability of the dielectric permittivity, giving rise to a fairly large coefficient of the dielectric nonlinearity, {approx}2.5x10{sup 9} J C{sup -4} m{sup -5}. Moreover, the PMNT pyrochlore films exhibited superior electrical insulation properties with a relatively high breakdown field (E{sub breakdown{approx}}1.5 MV/cm) and a very low leakage current density of about 8.2x10{sup -7} A/cm{sup 2} obtained at an electric field intensity as high as 500 kV/cm.

36 MATERIALS SCIENCE↗

Role of hydrogen in evolution of plasma parameters and dust growth in capacitively coupled dusty plasmas

The temporal behavior of naturally produced dust parameters (radius and density) and plasma parameters (electron temperature and ion flux) was investigated in radio frequency SiH{sub 4}/H{sub 2}/Ar plasmas. As a result, the electron temperature and ion flux were shown to be strongly correlated with the three-step dust growth pattern. In addition, the generation of dust particles was suppressed by mixing more hydrogen gas due to the plasma chemistry, and consequently, the dust growth rate in the molecular accretion growth, which is known to be proportional to the growth rate of thin film deposition, increased.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of trap states in high Al content AlGaN/GaN high electron mobility transistors by frequency dependent capacitance and conductance analysis

Trap states in Al{sub 0.55}Ga{sub 0.45}N/GaN Schottky-gate high-electron-mobility transistors (S-HEMTs) and Al{sub 2}O{sub 3}/Al{sub 0.55}Ga{sub 0.45}N/GaN metal-oxide-semiconductor HEMTs (MOS-HEMTs) were investigated with conductance method in this paper. Surface states with time constant of (0.09–0.12) μs were found in S-HEMTs, and electron tunneling rather than emission was deemed to be the dominant de-trapping mechanism due to the high electric field in high Al content barrier. The density of surface states evaluated in S-HEMTs was (1.02–4.67)×10{sup 13} eV{sup −1}·cm{sup −2}. Al{sub 2}O{sub 3} gate insulator slightly reduced the surface states, but introduced low density of new traps with time constant of (0.65–1.29) μs into MOS-HEMTs.

36 MATERIALS SCIENCE↗

Cleaning of optical surfaces by capacitively coupled RF discharge plasma

In this paper, we report cleaning of carbon capped molybdenum (Mo) thin film by in-house developed radio frequency (RF) plasma reactor, at different powers and exposure time. Carbon capped Mo films were exposed to oxygen plasma for different durations at three different power settings, at a constant pressure. After each exposure, the thickness of the carbon layer and the roughness of the film were determined by hard x-ray reflectivity measurements. It was observed that most of the carbon film got removed in first 15 minutes exposure. A high density layer formed on top of the Mo film was also observed and it was noted that this layer cannot be removed by successive exposures at different powers. A significant improvement in interface roughness with a slight improvement in top film roughness was observed. The surface roughness of the exposed and unexposed samples was also confirmed by atomic force microscopy measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of a microwave capacitive method for the spectroscopy of the complex permittivity

We describe a vector network analyzer-based method to study the electromagnetic properties of nanoscale dielectrics at microwave frequencies (1 MHz–40 GHz). The complex permittivity spectrum of a given dielectric can be determined by placing it in a capacitor accessed on its both electrodes by coplanar waveguides. However, inherent propagation delays along the signal paths together with frequency-dependent effective surface of the capacitor at microwave frequencies can lead to significant distortion in the measured permittivity, which in turn can give rise to artificial frequency variations of the complex permittivity. We detail a fully analytical rigorous correction sequence with neither recourse to extrinsic loss mechanisms nor to arbitrary parasitic signal paths. We illustrate our method on 3 emblematic dielectrics: ferroelectric morphotropic lead zirconate titanate, its paraelectric pyrochlore counterpart, and strontium titanate. Permittivity spectra taken at various points along the hysteresis loop help shedding light onto the nature of the different dielectric energy loss mechanisms. Thanks to the analytical character of our method, we can discuss routes to extend it to higher frequencies and we can identify unambiguously the sources of potential artifacts.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The segmented non-uniform dielectric module design for uniformity control of plasma profile in a capacitively coupled plasma chamber

Low-temperature plasma technique is one of the critical techniques in IC manufacturing process, such as etching and thin-film deposition, and the uniformity greatly impacts the process quality, so the design for the plasma uniformity control is very important but difficult. It is hard to finely and flexibly regulate the spatial distribution of the plasma in the chamber via controlling the discharge parameters or modifying the structure in zero-dimensional space, and it just can adjust the overall level of the process factors. In the view of this problem, a segmented non-uniform dielectric module design solution is proposed for the regulation of the plasma profile in a CCP chamber. The solution achieves refined and flexible regulation of the plasma profile in the radial direction via configuring the relative permittivity and the width of each segment. In order to solve this design problem, a novel simulation-based auto-design approach is proposed, which can automatically design the positional sequence with multi independent variables to make the output target profile in the parameterized simulation model approximate the one that users preset. This approach employs an idea of quasi-closed-loop control system, and works in an iterative mode. It starts from initial values of the design variable sequences, and predicts better sequences via the feedback of the profile error between the output target profile and the expected one. It never stops until the profile error is narrowed in the preset tolerance.

36 MATERIALS SCIENCE↗

Low-temperature capacitive sensor based on perovskite oxides

Energy, environmental and social issues drive towards the green political economy and the development of advanced technologies, promoting renewable energy sources, improving energy conversion efficiency and reducing exhaust gas emissions. The development of sustainable technologies requires strategic research in the area of gas sensors for monitoring air quality, controlling gas emissions and optimizing combustion processes. Solid state sensors are the most attractive one because of their simplicity in function, small size and low cost. The aim of this work is to synthetize and characterize strontium titanate and test its sensing performance. The prepared sensor device shows significant sensitivity and response rate at room-temperature. However, because of the low recovery rate, the regeneration of the sensor has to be made at high temperature for promoting the decomposition of the carbonates formed on the perovkite surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗