Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Balloon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Balloon-borne infrared coronagraph

The use of balloon vehicles to observe the solar corona with an infrared coronagraph is reviewed. The scientific results and the instruments employed are discussed. A parallel is drawn between the required functions of a coronagraph and of a far-infrared cold telescope.

Strong, J.↗

Astronomical observations with the University College London balloon borne telescope

The characteristics of a telescope system which was developed for high altitude balloon astronomy are discussed. A drawing of the optical system of the telescope is provided. A sample of the signals recorded during one of the flights is included. The correlation between the infrared flux and the radio continuum flux is analyzed. A far infrared map of the radio and infrared peaks of selected stars is developed. The spectrum of the planet Saturn is plotted to show intensity as compared with wavenumber.

Jennings, R. E.↗

A balloon-borne 1 meter telescope for far-infrared astronomy

The flight of a balloon-borne one-meter telescope for infrared astronomy in the wavelength interval of 40 to 240 microns is discussed. The gyro-stabilized telescope mapped the intensity of the far infrared radiation from NGC 7538, Mars, the Orion Nebula, and W3 with a resolution of one minute and from selected regions of these sources with a resolution of 30 seconds. The infrared detection is described and its capabilities are analyzed. The instrumentation, orientation system, and modes of observation of the telescope are defined.

Fazio, G. G.↗

Design and performance of a 39cm balloon-borne telescope

A system for stabilizing a balloon-borne telescope using a star sensor device is described. Guide stars from minus four to plus four magnitude can be used and the sensor may be offset with respect to the telescope by as much as plus or minus five degrees in elevation and cross elevation to enable parts of the sky containing no suitable guide stars to be viewed. Acquisition of the guide star and setting of the offset coordinates is carried out by ground command and both may be changed in flight. The main design parameters of the equipment are summarized. Block diagrams and circuit diagrams of the star tracker are provided.

Tomlinson, H. S.↗

An orientable, stabilized balloon-borne gondola for around-the-world flights

A system capable of pointing a balloon-borne telescope at selected celestial objects to an accuracy of approximately 10 arc minutes for an extended period (weeks to months) without reliance on telemetry is described. A unique combination of a sun/star tracker, an on-board computer, and a gyrocompass is utilized for navigation, source acquisition and tracking, and data compression and recording. The possibilities for intelligent activities by the computer are also discussed.

Ricker, G. R.↗

A cooled telescope for infrared balloon astronomy

The characteristics of a 16 inch liquid helium cooled Cassegrain telescope with vibrating secondary mirror are discussed. The telescope is used in making far infrared astronomical observations. The system houses several different detectors for multicolor photometry. The cooled telescope has a ten to one increase in signal-to-noise ratio over a similar warm version and is installed in a high altitude balloon gondola to obtain data on the H2 region of the galaxy.

Frederick, C.↗

A balloon-borne cryogenically cooled filter radiometer

The development of a cryogenically cooled filter radiometer for use with high altitude balloons is discussed. The radiometer has features which include the options for remote operation of two filter wheels each containing six filters at helium temperature and a cryogenic rotary chopper which may be run at 200 cycles per second or positioned open or closed, and a remotely operable chopped blackbody calibration source. The radiometer contains a ten inch diameter liquid nitrogen cooled Cassegrain telescope with nine individually filtered field stops in the focal plane. The telescope is mounted on a two-axis servo operated gimbal which is used to make sky scans under the control of an onboard programmer.

Debell, A. G.↗

AIROscope: Ames infrared balloon-borne telescope

A balloon-borne telescope system designed for astronomical observations at infrared wavelengths is discussed. The telescope is gyro-stabilized with updated pointing information derived from television, star tracker, or ground commands. The television system furnishes both course and fine acquisition after initial orientation using a pair of fluxgate servo compasses. Command and control is by a UHF link with 256 commands available. Scientific and engineering data are telemetered to the ground station via narrow band F.M. in the L band. The ground station displays all scientific, engineering and status information during the flights and records the command and telemetry digital bit stream for detailed analysis. The AIROscope telescope has a 28-inch diameter primary mirror and Dall-Kirkham optics. The beam is modulated by oscillating a secondary mirror at 11 or 25 Hz with provision for left or right beam fixed positions by command.

Koontz, O. L.↗

Low-background air-infrared telescope for balloon-borne infrared astronomy

The design and performance of a far-infrared telescope are discussed. The instrument is twenty centimeters in diameter and has excellent operating characteristics at 100 microns. The principal features of the telescope are summarized. A diagram of the system is provided. The telescope completed two sucessful balloon flights in which the planets Mars and Saturn were used as calibration sources. Observations were made of the H2 regions W 3, Orion A, NGC 2024, and the bright infrared galaxy M 82.

Low, F. J.↗

Stabilization, pointing and command control of a balloon-borne 1-meter telescope

A 1-meter balloon-borne telescope has been constructed and flown to observe far-infrared radiation from celestial sources. The attitude control systems must perform to the diffraction limit of the telescope for stabilization and have positioning capability for source acquisition. These and associated systems are discussed in detail, as is the command control of the payload as a whole.

Hazen, N. L.↗

A general purpose stabilised balloon platform

The development of a three axis stabilized balloon platform capable of being operated in three modes of increasing accuracy is discussed. The system relies on angular motion sensing for primary feedback with linear accelerometers, magnetometers, and a star sensor for positional information. When under primary control the system will acquire and stabilize on any accessible part of the celestial sphere. A video verification system is included to provide pointing confirmation. Under improved accuracy control, the star sensor is used to lock onto a target star.

How, J.↗

Measurement of atmospheric turbulence strength at high altitude with balloon-borne temperature sensors

A technique to measure a vertical profile of the optical strength of turbulence employs the measurement of a root mean square temperature difference between two microthermal probes carried aloft as part of a balloon payload. Microthermal fluctuations provide a measure for the density fluctuations of turbulence. Examination of recorded profiles of refractive-index structure coefficients reveals a turbulence structure which is organized into multiple, thin groupings of strong turbulence separated by relatively quiescent intervals of variable length.

Bufton, J. L.↗

Balloon-based measurements of the cosmic background radiation

A balloon-borne liquid-helium-cooled spectrometer was developed and flown to measure the cosmic background radiation in the 3- to 18-per-cm region. It features a cooled horn antenna, a polarizing Michelson interferometer, and a germanium bolometer. These design features and the performance of the instrument are discussed.

Mather, J. C.↗

Large area double scattering telescope for balloon-borne studies of neutrons and gamma rays

A large area double scattering telescope for balloon-borne research is described. It measures the flux, energy and direction of 2-100 MeV neutrons and 0.5-30 MeV gamma rays. These measurements are made using time-of-flight and pulse height analysis techniques with two large tanks of mineral oil liquid scintillator. Results from Monte Carlo calculations of the efficiency, energy resolution and angular resolution are presented and the electronics implementation for the processing of 80 photomultiplier tubes signals will be discussed. The detector weighs 800 kg with a large part of this weight being the liquid scintillator (320 kg). It will be flown at 3 mbars for flight durations up to 40 hours. The first flight is planned for Spring, 1975.

Zych, A. D.↗

Balloon borne laser transceiver

A balloon borne laser transceiver (BBLT) which was carried to an altitude of 80,000 feet, was used to measure the turbulence effect of the atmosphere in daylight on laser beams going both up and down through the intervening atmosphere. The principles of operation of the BBLT are discussed. The instrument must acquire an up-going argon laser beam, lock onto it, and transmit back to the ground observatory a helium-neon laser beam. Questions of system operation for the down-going and the up-going beam are considered along with a servo system analysis.

Wischnia, H. F.↗