Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “B physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Electrochemical Li Intercalation in Black Phosphorus: In Situ and Ex Situ Studies

A systematic study on electrochemical charge transfer in Li-doped black phosphorous (BP) was carried out by both in-situ and ex-situ Raman scattering. Galvanostatic discharge of dedicated in-situ electrochemical cell for Raman spectroscopy was used to study time evolution of vibrational modes under lithiation. In addition to the peak broadening which is a result of structural expansion, peaks corresponding to all three atomic vibrational modes A 1 g , B 2 g and A 2 g were found to red-shift as a result of lithiation. Peaks B 2 g and A 2 g were shifted about 1.6 times more towards lower wavenumbers in comparison to A 1 g . Further characterizations using optical and electron microscopy showed that the intercalation of BP is highly anisotropic, where channels along the zigzag direction were found to be the easy direction for intercalation. X-ray diffraction on intercalated samples confirmed a reduction of thickness as lithiation weakens interlayer bonding, thus resulting in a partial exfoliation of BP flakes. Here, first principle studies using density function theory (DFT) were used to develop a theoretical model for the intercalation mechanism. The discrepancy between the experimental and the theoretical results was also addressed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Monitoring Local Electric Fields using Stark Shifts on Napthyl Nitrile-Functionalized Silicon Photoelectrodes

in this paper, we report spectroscopic measurements of the local electric field using vibrational Stark shifts of napthyl nitrile-functionalized silicon under electrochemical working conditions. The C$\equiv$N bond is particularly sensitive to applied electric fields and serves as a good probe for the local electric fields at the silicon–aqueous interface. Here, surface-enhanced Raman spectra (SERS) are collected at a silicon surface using a water immersion lens as a function of the reference potential in a three-terminal potentiostat. In deionized (DI) water and KCl solutions, the nitrile (i.e., C$\equiv$N) stretch downshifts by 4.7 and 8.6 cm –1 , respectively, under an applied potential of –1 V vs Ag/AgCl. Density functional theory (DFT) calculations of the napthyl nitrile complex carried out under various electric fields establish the Stark tuning rate to be 0.5622 cm–1/(MV cm –1 ). Based on this relation, electric fields of –8.4 and –15.2 MV/cm were obtained under negative applied potentials. These measurements report the electric field strength within the double (i.e., Helmholtz) layer, which is responsible for pulling positively charged ions (e.g., H + ) toward the surface in reduction reaction processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Distinguishing Electron and Hole Dynamics in Functionalized CdSe/CdS Core/Shell Quantum Dots Using Complementary Ultrafast Spectroscopies and Kinetic Modeling

The evolution of excitation energy and photogenerated charges in semiconductor quantum dots (QDs) functionalized with molecular acceptors can be probed on ultrafast time scales using techniques such as transient absorption (TA) spectroscopy. However, historical interpretations that the 1S(e)-1S 3/2 (h) transition in Cd-chalcogenide QDs is fully attributable to electrons may be misleading, and multiexponential models used to fit TA kinetics do not correspond directly to specific photophysical processes. Here, we present visible-wavelength and mid-IR TA and time-resolved photoluminescence measurements to inform a comprehensive kinetic model of the photoexcited CdSe/CdS core/shell QDs functionalized with passivating oleic acid (OA), hole-accepting ferrocene, or electron-accepting naphthalene bisimide (NBI). We show that ~30% of the 1S signal and 72% of the IR signal can originate from holes in well-passivated core/shell QDs. We also demonstrate evidence of electron trapping in OA-capped core/shell QDs, with additional electron transfer and hole trapping in the QDs functionalized with NBI. Electron (hole) trapping and detrapping occur in 450 ± 100 ps (430 ± 70 ps) and 340 ± 100 ps (1.1 ± 0.4 ns) respectively, while the time constant for electron transfer to NBI is ~1.8 ns. The comprehensive picture of photophysical processes provided by the complementary ultrafast techniques and kinetic modeling can accelerate both the fundamental science and application development of nanostructured and molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ultrafast Triplet Pair Separation and Triplet Trapping following Singlet Fission in Amorphous Pentacene Films

In this work, ultrafast infrared and electronic spectroscopy are used to examine the dynamics of triplet pair separation following singlet fission in amorphous and crystalline films of the model singlet fission chromophore, 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-Pn). Direct probing of correlated triplet pair intermediates through their unique vibrational frequencies, infrared electronic transitions, and indirectly through their visible triplet absorptions reveals that triplet pair separation occurs on similar picosecond timescales in both amorphous and crystalline films despite their markedly different average intermolecular coupling strengths. Although triplet pair separation occurs on similar timescales in both environments, measurements of diffusion-controlled triplet-triplet annihilation reveal that the diffusivity of triplet excited states is an order of magnitude lower in amorphous films. The data reveal the presence of sparse triplet traps in the amorphous environment that inhibit the transport of triplet excitons in comparison to crystalline films. These observations inform recent efforts to develop disordered and polymeric singlet fission sensitizers that contain amorphous regions. In particular, the data suggest that it may be possible to nanostructure amorphous or polymeric singlet fission sensitizers to allow ultrafast triplet pair separation and harvesting in photovoltaic and light emitting applications despite their low triplet exciton diffusivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrocatalytic Reduction of CO 2 to CO over Ag(110) and Cu(211) Modeled by Grand-Canonical Density Functional Theory

We report the results of modeling CO 2 reduction (CO 2 R) to CO over Ag(110) and Cu(211) surfaces at different applied potentials using grand-canonical density functional theory (GC-DFT), a method specifically designed to accurately model electrochemical systems. In addition to demonstrating GC-DFT’s ability to accurately model electrochemical processes, we also compare it with the computational hydrogen electrode (CHE) approach. GC-DFT predicts that the geometries of these reacting systems strongly depend on the applied potential and the Helmholtz free energies vary nonlinearly with the applied potential, which contradicts a central assumption of the CHE approach. The CHE approach neglects the change in the number of electrons on the electrode surface at different applied potentials, which reduces its accuracy as the potential changes from the potential of zero charge. Our results further demonstrate that the grand free energies of the reaction intermediates not only depend on the value of the applied potential but also on the metal surface type, adsorption site, and adsorbate. GC-DFT’s ability to predict the effect of the applied potential on adsorbate geometry enables it to evaluate different possible reaction mechanisms at different applied potentials. For instance, GC-DFT predicts that the first step of CO2R likely switches from proton-coupled electron transfer to sequential electron transfer and then proton transfer at more reducing potentials, a result that cannot be determined by the CHE because it assumes that all electron transfers are coupled to proton transfers and neglects the effect of the applied potential on the adsorbate geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Role of Molecular Simulations in the Design of Metal–Organic Frameworks for Gas-Phase Thermocatalysis: A Perspective

Here, metal organic frameworks (MOFs) are highly tunable porous crystalline solids with spatially and electronically isolated catalytically active sites that have been demonstrated for a variety of thermo-, redox-, and photocatalytic reactions. Their tunable natures and relatively well-defined active sites make them advantageous for catalyst design, and molecular simulations have proven highly valuable in this endeavor. However, complexities in the MOF structure require advanced simulation strategies that accurately capture quantum chemistry at the strongly correlated transition metal cation active sites, compositional and structural changes caused by finite temperature and pressure reaction conditions, and transport effects in variously sized pore environments. Luckily, several groups have started using such simulation strategies, paving the way for rich opportunities to design MOF catalysts. Herein, we highlight such examples and provide a perspective on the needs for molecular simulations in the design of MOF catalysts moving forward.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Significant Differences in Solvation Thermodynamics of C1–C3 Oxygenates in Hydrophilic versus Hydrophobic Pores of a Hydrophilic Ti-FAU Zeolite Model

The rates of catalytic reactions have been observed to be dramatically different in zeolites, depending on if they are hydrophobic or hydrophilic. Hypotheses aimed at explaining this behavior have pointed to various solvent molecule and zeolite properties as having influence on entropy. Herein, the influence of various solvent and adsorbate properties on the solvation energies, entropies, and free energies of eleven C1-C3 oxygenates in hydrophobic and hydrophilic pores within a hydrophilic model of Ti-FAU zeolite are tested. The results indicate significant variation in the calculated solvation thermodynamics depending on the adsorbate type, as well as if it is bound within a hydrophobic or hydrophilic pore. Further, while solvation energies are related to solvent-adsorbate interactions, solvation entropies have multiple contributions, and these differ depending on if the adsorbate is in a hydrophobic or hydrophilic pore. Specifically, solvation entropies in hydrophobic pores are related to solvent structural properties, whereas solvation entropies in hydrophilic pores are related to adsorbate polarity. Here, the large range of results obtained from two different pores within one zeolite model with minimal unique adsorption sites suggests that solvation behavior in zeolites is complicated and that the phenomena that control observed performance depend on the zeolite, reaction, and solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Toward Engineering of Solution Microenvironments for the CO 2 Reduction Reaction: Unraveling pH and Voltage Effects from a Combined Density-Functional–Continuum Theory

Engineering the electrolyte microenvironment represents an attractive route to tuning the selectivity of electrocatalytic reactions beyond catalyst composition and morphology. However, harnessing the full potential of this approach requires understanding the interplay between voltage, electrolyte composition, and adsorbate binding within the electrical double layer, which is absent from the usual theoretical approaches. In this study, we apply a recently developed density functional theory (DFT)–continuum approach based on the effective screening medium method and reference interaction site model (ESM–RISM) to explore electrolyte effects with an enhanced description of the electrochemical interface. Furthermore, applying this method to the binding of CO adsorbates in potassium-containing electrolytes on copper, a problem of direct relevance to CO 2 electroreduction to value-added products, we show that the interdependence of voltage and pH leads to an unexpected change in adsorption site preference on Cu(001) terraces. Our findings highlight the often-overlooked importance of the electrical double-layer structure for predicting catalyst operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydration-Induced Disorder Lowers the Energy Barriers for Methyl Rotation in Drug Molecules

The thermally activated dynamics of methyl groups are important for biochemical activity as they allow for a more efficient sampling of the energy landscape. In this work, we compare methyl rotations in the dry and variously hydrated states of three primary drugs under consideration to treat the recent coronavirus disease (COVID-19), namely, hydroxychloroquine and its sulfate, dexamethasone and its sodium diphosphate, and remdesivir. We find that the main driving force behind the considerable reduction in the activation energy for methyl rotations in the hydrated state is the hydration-induced disorder in the methyl group local environments. Furthermore, the activation energy for methyl rotations in the hydration-induced disordered state is much lower than that in an isolated drug molecule, indicating that neither isolated molecules nor periodic crystalline structures can be used to analyze the potential landscape governing the side group dynamics in drug molecules. Instead, only the explicitly considered disordered structures can provide insight.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic Determination of Key Energy Scales for the Base Hamiltonian of Chromium Trihalides

The van der Waals (vdW) chromium trihalides (CrX 3 ) exhibit field-tunable, two-dimensional magnetic orders that vary with the halogen species and the number of layers. Their magnetic ground states with proximity in energies are sensitive to the degree of ligand-metal (p-d) hybridization and relevant modulations in the Cr d-orbital interactions. We use soft X-ray absorption (XAS) and resonant inelastic X-ray scattering (RIXS) spectroscopy at Cr L -edge along with the atomic multiplet simulations to determine the key energy scales such as the crystal field 10 Dq and interorbital Coulomb interactions under different ligand metal charge transfer (LMCT) in CrX 3 (X= Cl, Br, and I). Through this systematic study, we show that our approach compared to the literature has yielded a set of more reliably determined parameters for establishing a base Hamiltonian for CrX 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Limits to Electrical Mobility in Lead-Halide Perovskite Semiconductors

Semiconducting polycrystalline thin films are cheap to produce and can be deposited on flexible substrates, yet high-performance electronic devices usually utilize single crystal semiconductors, owing to their superior charge-carrier mobilities and longer diffusion lengths. Here we show that the electrical performance of polycrystalline films of metal-halide perovskites (MHPs) approaches that of single crystals at room temperature. Combining temperature-dependent terahertz conductivity measurements and ab initio calculations we uncover a complete picture of the origins of charge-carrier scattering in single crystals and polycrystalline films of CH 3 NH 3 PbI 3 . We show that Fröhlich scattering of charge carriers with multiple phonon modes is the dominant mechanism limiting mobility, with grain-boundary scattering further reducing mobility in polycrystalline films. We reconcile the large discrepancy in charge-carrier diffusion lengths between single crystals and films by considering photon reabsorption. Thus, polycrystalline films of MHPs offer great promise for devices beyond solar cells, including light-emitting diodes and modulators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mesostructuring in Liquid–Liquid Extraction Organic Phases Originating from Critical Points

Organic phase structure plays an important role in solute extraction energetics and phase behavior of liquid-liquid extraction (LLE) systems. For a binary extractant (amphiphile)/solvent mixture of relevance to LLE, we find that the organic phase mesostructuring is consistent with extractant concentration fluctuations as the compositional isotherm traverses the Widom line above its liquid-liquid critical point. This reveals a different mechanism for the well-documented heterogeneities in LLE organic phases that are typically attributed to micellization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Isotope Effects in the Zundel–Eigen Isomerization of H + (H 2 O) 6

The isomerization pathway between the energetically low-lying Zundel and Eigen isomers of the protonated water hexamer was investigated using high-level ab initio calculations including a treatment of zero-point corrections. On the basis of these calculations, the Zundel–Eigen isomerization was found to proceed through a stable intermediate isomer, which consists of a four-membered ring with two single acceptor water molecules. Further, the inclusion of vibrational zero-point energy is shown to be important for accurately establishing the relative energies of the three relevant isomers involved in the Zundel–Eigen isomerization. Diffusion Monte Carlo calculations including anharmonic vibrational effects show that all three isomers of H + (H 2 O) 6 and D + (D 2 O) 6 have well-defined structures. The energetic ordering of the three isomers changes upon deuteration. The implications of these results for the vibrational spectra of H + (H 2 O) 6 and D + (D 2 O) 6 are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Binding of Li + to Negatively Charged and Neutral Ligands in Polymer Electrolytes

Conceptually, single-ion polymer electrolytes (SIPE) with the anion bound to the polymer could solve major issues in Li-ion batteries, but their conductivity is too low. Experimentally, weakly interacting anionic groups have the best conductivity. To provide a theoretical basis for this result, density functional theory calculations of the optimized geometries and energies are performed for charged ligands used in SIPE. Comparison is made to neutral ligands found in dual-ion conductors, which demonstrate higher conductivity. Further, the free energy differences between adding and subtracting a ligand are small enough for the neutral ligands to have the conductivity seen experimentally. However, charged ligands have large barriers, implying that lithium transport will coincide with the slow polymer diffusion, as observed in experiments. Overall, SIPE will require additional solvent to achieve a sufficiently high conductivity. Additionally, the binding of mono- and bidentate geometries varies, providing a simple and clear reason that polarizable force fields are required for detailed interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Surface Zeta Potential of ALD-Grown Metal-Oxide Films

Membranes are among the most promising technologies for energy-efficient and highly selective separations, and the surface-charge property of membranes plays a critical role in their broad applications. Atomic layer deposition (ALD) can deposit materials uniformly and with high precision and controllability on arbitrarily complex and large substrates, which renders it a promising method to tune the electrostatics of water/solid interfaces. However, a systematic study of surface-charge properties of ALD-grown films in aqueous environments is still lacking. In this work, 17 ALD-grown metal-oxide films are synthesized, and a comprehensive study of their water stability, wetting properties, and surface-charge properties is provided. Furthermore, this work represents a resource guide for researchers and ultimately for materials and process engineers, seeking to tailor interfacial charge properties of membranes and other porous water treatment components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗