Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Accessibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Materials selection for oxide-based resistive random access memories

The energies of atomic processes in resistive random access memories (RRAMs) are calculated for four typical oxides, HfO{sub 2}, TiO{sub 2}, Ta{sub 2}O{sub 5}, and Al{sub 2}O{sub 3}, to define a materials selection process. O vacancies have the lowest defect formation energy in the O-poor limit and dominate the processes. A band diagram defines the operating Fermi energy and O chemical potential range. It is shown how the scavenger metal can be used to vary the O vacancy formation energy, via controlling the O chemical potential, and the mean Fermi energy. The high endurance of Ta{sub 2}O{sub 5} RRAM is related to its more stable amorphous phase and the adaptive lattice rearrangements of its O vacancy.

36 MATERIALS SCIENCE↗

Cu impurity in insulators and in metal-insulator-metal structures: Implications for resistance-switching random access memories

We present numerical results from atomistic simulations of Cu in SiO{sub 2} and Al{sub 2}O{sub 3}, with an emphasis on the thermodynamic, kinetic, and electronic properties. The calculated properties of Cu impurity at various concentrations (9.91 × 10{sup 20 }cm{sup −3} and 3.41 × 10{sup 22 }cm{sup −3}) in bulk oxides are presented. The metal-insulator interfaces result in up to a ∼4 eV reduction in the formation energies relative to the crystalline bulk. Additionally, the importance of Cu-Cu interaction in lowering the chemical potential is introduced. These concepts are then discussed in the context of formation and stability of localized conductive paths in resistance-switching Random Access Memories (RRAM-M). The electronic density of states and non-equilibrium transmission through these localized paths are studied, confirming conduction by showing three orders of magnitude increase in the electron transmission. The dynamic behavior of the conductive paths is investigated with atomistic drift-diffusion calculations. Finally, the paper concludes with a molecular dynamics simulation of a RRAM-M cell that attempts to combine the aforementioned phenomena in one self-consistent model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculation of energy-barrier lowering by incoherent switching in spin-transfer torque magnetoresistive random-access memory

To make a useful spin-transfer torque magnetoresistive random-access memory (STT-MRAM) device, it is necessary to be able to calculate switching rates, which determine the error rates of the device. In a single-macrospin model, one can use a Fokker-Planck equation to obtain a low-current thermally activated rate ∝exp(−E{sub eff}/k{sub B}T). Here, the effective energy barrier E{sub eff} scales with the single-macrospin energy barrier KV, where K is the effective anisotropy energy density and V the volume. A long-standing paradox in this field is that the actual energy barrier appears to be much smaller than this. It has been suggested that incoherent motions may lower the barrier, but this has proved difficult to quantify. In the present paper, we show that the coherent precession has a magnetostatic instability, which allows quantitative estimation of the energy barrier and may resolve the paradox.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Realization of a reversible switching in TaO{sub 2} polymorphs via Peierls distortion for resistance random access memory

Transition-metal-oxide based resistance random access memory (RRAM) is a promising candidate for next-generation universal non-volatile memories. Searching and designing appropriate materials used in the memories becomes an urgent task. Here, a structure with the TaO{sub 2} formula was predicted using evolutionary algorithms in combination with first-principles calculations. This triclinic structure (T-TaO{sub 2}) is both energetically and dynamically more favorable than the commonly believed rutile structure (R-TaO{sub 2}). The metal-insulator transition (MIT) between metallic R-TaO{sub 2} and T-TaO{sub 2} (band gap: 1.0 eV) is via a Peierls distortion, which makes TaO{sub 2} a potential candidate for RRAM. The energy barrier for the reversible phase transition is 0.19 eV/atom and 0.23 eV/atom, respectively, suggesting low power consumption for the resistance switch. The present findings about the MIT as the resistance-switch mechanism in Ta-O system will stimulate experimental work to fabricate tantalum oxides based RRAM.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Access to generalized parton distributions at COMPASS

A brief experimentalist's introduction to Generalized Parton Distributions (GPDs) is given. Recent COMPASS results are shown on transverse target-spin asymmetries in hard exclusive ρ{sup 0} production and their interpretation in terms of a phenomenological model as indication for chiral-odd, transverse GPDs is discussed. For deeply virtual Compton scattering, it is briefly outlined how to access GPDs and projections are shown for future COMPASS measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Centrality measures highlight proton traps and access points to proton highways in kinetic Monte Carlo trajectories

A centrality measure based on the time of first returns rather than the number of steps is developed and applied to finding proton traps and access points to proton highways in the doped perovskite oxides: AZr{sub 0.875}D{sub 0.125}O{sub 3}, where A is Ba or Sr and the dopant D is Y or Al. The high centrality region near the dopant is wider in the SrZrO{sub 3} systems than the BaZrO{sub 3} systems. In the aluminum-doped systems, a region of intermediate centrality (secondary region) is found in a plane away from the dopant. Kinetic Monte Carlo (kMC) trajectories show that this secondary region is an entry to fast conduction planes in the aluminum-doped systems in contrast to the highest centrality area near the dopant trap. The yttrium-doped systems do not show this secondary region because the fast conduction routes are in the same plane as the dopant and hence already in the high centrality trapped area. This centrality measure complements kMC by highlighting key areas in trajectories. The limiting activation barriers found via kMC are in very good agreement with experiments and related to the barriers to escape dopant traps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantifying data retention of perpendicular spin-transfer-torque magnetic random access memory chips using an effective thermal stability factor method

The thermal stability of perpendicular Spin-Transfer-Torque Magnetic Random Access Memory (STT-MRAM) devices is investigated at chip level. Experimental data are analyzed in the framework of the Néel-Brown model including distributions of the thermal stability factor Δ. We show that in the low error rate regime important for applications, the effect of distributions of Δ can be described by a single quantity, the effective thermal stability factor Δ{sub eff}, which encompasses both the median and the standard deviation of the distributions. Data retention of memory chips can be assessed accurately by measuring Δ{sub eff} as a function of device diameter and temperature. We apply this method to show that 54 nm devices based on our perpendicular STT-MRAM design meet our 10 year data retention target up to 120 °C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-crystalline CuO nanowires for resistive random access memory applications

Recently, the mechanism of resistive random access memory (RRAM) has been partly clarified and determined to be controlled by the forming and erasing of conducting filaments (CF). However, the size of the CF may restrict the application and development as devices are scaled down. In this work, we synthesized CuO nanowires (NW) (∼150 nm in diameter) to fabricate a CuO NW RRAM nanodevice that was much smaller than the filament (∼2 μm) observed in a bulk CuO RRAM device in a previous study. HRTEM indicated that the Cu{sub 2}O phase was generated after operation, which demonstrated that the filament could be minimize to as small as 3.8 nm when the device is scaled down. In addition, energy dispersive spectroscopy (EDS) and electron energy loss spectroscopy (EELS) show the resistive switching of the dielectric layer resulted from the aggregated oxygen vacancies, which also match with the I-V fitting results. Those results not only verify the switching mechanism of CuO RRAM but also show RRAM has the potential to shrink in size, which will be beneficial to the practical application of RRAM devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characteristics and mechanism study of cerium oxide based random access memories

In this work, low operating voltage and high resistance ratio of different resistance states of binary transition metal oxide based resistive random access memories (RRAMs) are demonstrated. Binary transition metal oxides with high dielectric constant have been explored for RRAM application for years. However, CeO{sub x} is considered as a relatively new material to other dielectrics. Since research on CeO{sub x} based RRAM is still at preliminary stage, fundamental characteristics of RRAM such as scalability and mechanism studies need to be done before moving further. Here, we show very high operation window and low switching voltage of CeO{sub x} RRAMs and also compare electrical performance of Al/CeO{sub x}/Au system between different thin film deposition methods and discuss characteristics and resistive switching mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bipolar resistive switching characteristics in tantalum nitride-based resistive random access memory devices

This paper reports the bipolar resistive switching characteristics of TaN{sub x}-based resistive random access memory (ReRAM). The conduction mechanism is explained by formation and rupture of conductive filaments caused by migration of nitrogen ions and vacancies; this mechanism is in good agreement with either Ohmic conduction or the Poole-Frenkel emission model. The devices exhibit that the reset voltage varies from −0.82 V to −0.62 V, whereas the set voltage ranges from 1.01 V to 1.30 V for 120 DC sweep cycles. In terms of reliability, the devices exhibit good retention (>10{sup 5 }s) and pulse-switching endurance (>10{sup 6} cycles) properties. These results indicate that TaN{sub x}-based ReRAM devices have a potential for future nonvolatile memory devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin-transfer-torque efficiency enhanced by edge-damage of perpendicular magnetic random access memories

We numerically investigate the effect of magnetic and electrical damages at the edge of a perpendicular magnetic random access memory (MRAM) cell on the spin-transfer-torque (STT) efficiency that is defined by the ratio of thermal stability factor to switching current. We find that the switching mode of an edge-damaged cell is different from that of an undamaged cell, which results in a sizable reduction in the switching current. Together with a marginal reduction of the thermal stability factor of an edge-damaged cell, this feature makes the STT efficiency large. Our results suggest that a precise edge control is viable for the optimization of STT-MRAM.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of cooling rate in planar thermally assisted magnetic random access memory: Improved writeability due to spin-transfer-torque influence

This paper investigates the effect of a controlled cooling rate on magnetic field reversal assisted by spin transfer torque (STT) in thermally assisted magnetic random access memory. By using a gradual linear decrease of the voltage at the end of the write pulse, the STT decays more slowly or at least at the same rate as the temperature. This condition is necessary to make sure that the storage layer magnetization remains in the desired written direction during cooling of the cell. The influence of the write current pulse decay rate was investigated on two exchange biased synthetic ferrimagnet (SyF) electrodes. For a NiFe based electrode, a significant improvement in writing reproducibility was observed using a gradual linear voltage transition. The write error rate decreases by a factor of 10 when increasing the write pulse fall-time from ∼3 ns to 70 ns. For comparison, a second CoFe/NiFe based electrode was also reversed by magnetic field assisted by STT. In this case, no difference between sharp and linear write pulse fall shape was observed. We attribute this observation to the higher thermal stability of the CoFe/NiFe electrode during cooling. In real-time measurements of the magnetization reversal, it was found that Ruderman-Kittel-Kasuya-Yosida (RKKY) coupling in the SyF electrode vanishes for the highest pulse voltages that were used due to the high temperature reached during write. As a result, during the cooling phase, the final state is reached through a spin-flop transition of the SyF storage layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Energetics of intrinsic defects in NiO and the consequences for its resistive random access memory performance

Energetics for a variety of intrinsic defects in NiO are calculated using state-of-the-art ab initio hybrid density functional theory calculations. At the O-rich limit, Ni vacancies are the lowest cost defect for all Fermi energies within the gap, in agreement with the well-known p-type behaviour of NiO. However, the ability of the metal electrode in a resistive random access memory metal-oxide-metal setup to shift the oxygen chemical potential towards the O-poor limit results in unusual NiO behaviour and O vacancies dominating at lower Fermi energy levels. Calculated band diagrams show that O vacancies in NiO are positively charged at the operating Fermi energy giving it the advantage of not requiring a scavenger metal layer to maximise drift. Ni and O interstitials are generally found to be higher in energy than the respective vacancies suggesting that significant recombination of O vacancies and interstitials does not take place as proposed in some models of switching behaviour.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A stochastic simulation method for the assessment of resistive random access memory retention reliability

This study presents an evaluation method for resistive random access memory retention reliability based on the Metropolis Monte Carlo algorithm and Gibbs free energy. The method, which does not rely on a time evolution, provides an extremely efficient way to compare the relative retention properties of metal-insulator-metal structures. It requires a small number of iterations and may be used for statistical analysis. The presented approach is used to compare the relative robustness of a single layer ZrO{sub 2} device with a double layer ZnO/ZrO{sub 2} one, and obtain results which are in good agreement with experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning resistance states by thickness control in an electroforming-free nanometallic complementary resistance random access memory

Tuning low resistance state is crucial for resistance random access memory (RRAM) that aims to achieve optimal read margin and design flexibility. By back-to-back stacking two nanometallic bipolar RRAMs with different thickness into a complementary structure, we have found that its low resistance can be reliably tuned over several orders of magnitude. Such high tunability originates from the exponential thickness dependence of the high resistance state of nanometallic RRAM, in which electron wave localization in a random network gives rise to the unique scaling behavior. The complementary nanometallic RRAM provides electroforming-free, multi-resistance-state, sub-100 ns switching capability with advantageous characteristics for memory arrays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An optically accessible pyrolysis microreactor

We report an optically accessible pyrolysis micro-reactor suitable for in situ laser spectroscopic measurements. A radiative heating design allows for completely unobstructed views of the micro-reactor along two axes. The maximum temperature demonstrated here is only 1300 K (as opposed to 1700 K for the usual SiC micro-reactor) because of the melting point of fused silica, but alternative transparent materials will allow for higher temperatures. Laser induced fluorescence measurements on nitric oxide are presented as a proof of principle for spectroscopic characterization of pyrolysis conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hydrogen doping in HfO{sub 2} resistance change random access memory

The structures and energies of hydrogen-doped monoclinic hafnium dioxide were calculated using density-functional theory. The electronic interactions are described within the LDA + U formalism, where on-site Coulomb corrections are applied to the 5d orbital electrons of Hf atoms and 2p orbital electrons of the O atoms. The effects of charge state, defect-defect interactions, and hydrogenation are investigated and compared with experiment. It is found that hydrogenation of HfO{sub 2} resistance-change random access memory devices energetically stabilizes the formation of oxygen vacancies and conductive vacancy filaments through multiple mechanisms, leading to improved switching characteristic and device yield.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thin Co/Ni-based bottom pinned spin-transfer torque magnetic random access memory stacks with high annealing tolerance

Spin-transfer torque magnetic random access memory (STT-MRAM) is considered as a replacement for next generation embedded and stand-alone memory applications. One of the main challenges in the STT-MRAM stack development is the compatibility of the stack with CMOS process flows in which thermal budgets up to 400 °C are applied. In this letter, we report on a perpendicularly magnetized MgO-based tunnel junction (p-MTJ) on a thin Co/Ni perpendicular synthetic antiferromagnetic layer with high annealing tolerance. Tunnel magneto resistance (TMR) loss after annealing occurs when the reference layer loses its perpendicular magnetic anisotropy due to reduction of the CoFeB/MgO interfacial anisotropy. A stable Co/Ni based p-MTJ stack with TMR values of 130% at resistance-area products of 9 Ω μm{sup 2} after 400 °C anneal is achieved via moment control of the Co/Ta/CoFeB reference layer. Thinning of the CoFeB polarizing layer down to 0.8 nm is the key enabler to achieve 400 °C compatibility with limited TMR loss. Thinning the Co below 0.6 nm leads to a loss of the antiferromagnetic interlayer exchange coupling strength through Ru. Insight into the thickness and moment engineering of the reference layer is displayed to obtain the best magnetic properties and high thermal stability for thin Co/Ni SAF-based STT-MRAM stacks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗