Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Insights into the interaction of nitrobenzene and the Ag(111) surface: A DFT study

Here, this study explores the potential of nitrobenzene as an anolyte material for nonaqueous redox flow batteries (RFBs) by theoretically examining its low-coverage adsorption behavior on neutral and charged Ag(111) model electrode surfaces. At the low coverage limit, DFT calculations show a preference for nitrobenzene to adsorb parallel to the surface, with the benzene ring and nitro group centered over HCP sites. Interactions between nitrobenzene and the surface were analyzed using induced charge density analysis, Bader charge analysis, and projected density of states (PDOS). It was found that nitrobenzene adsorbs primarily through van der Waals interactions with the surface. As nitrobenzene accumulates negative charge, the strength of adsorption diminishes. Understanding the electrode-electrolyte interface is crucial for enhancing RFB electrochemical performance, and this study sheds light on nitrobenzene's interaction with a model Ag electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of realgar on GSH synthesis in the mouse hippocampus: Involvement of system X{sub AG}{sup −}, system X{sub C}{sup −}, MRP-1 and Nrf2

Realgar is a type of mineral drug that contains arsenic and has neurotoxicity. Glutathione (GSH), which is the main antioxidant in the central nervous system, plays a key role in antioxidant defenses and the detoxification of arsenic. However, whether realgar interferes with the synthesis of GSH in the brain and the molecular mechanisms underlying its effects are largely unknown. Here, we used mouse models of exposure to realgar to show that realgar affects the synthesis of GSH in the hippocampus, leading to ultrastructural changes in hippocampal neurons and synapses and deficiencies in cognitive abilities, and that the mechanisms that cause this effect may be associated with alterations in the expression of system X{sub AG}{sup −}, system X{sub C}{sup −}, multidrug resistance-associated protein 1(MRP-1), nuclear factor E2-related factor 2 (Nrf2), γ-glutamylcysteine synthetase (γ-GCS), and the levels of glutamate (Glu) and cysteine (Cys) in the extracellular fluid. These findings provide a theoretical basis for preventing the drug-induced chronic arsenic poisoning in the nervous system that is triggered by realgar. - Highlights: • Realgar can induce neurotoxicity. • Realgar can modulate GSH levels in the hippocampus. • The mechanisms rely on expression changes of system X{sub AG}{sup −}, system X{sub C}{sup −}, MRP-1, Nrf2.

60 APPLIED LIFE SCIENCES↗

High-throughput multimodal exploration of a nanocrystalline Cu-Ag library

Sputter-deposited, nanocrystalline Cu-Ag thin films produced across a broad compositional and deposition-parameter space were evaluated to unravel the process-structure-property relationships important for creating hard, conductive electrical contacts and coatings. Combinatorial deposition involving pulsed direct current magnetron sputtering of elemental targets enabled swift examination of nearly the full range of alloy compositions and a relevant portion of deposition atomistics. Several high-throughput characterization modalities were employed to evaluate the chemistry, structure, and properties of the films. The resultant hardness, modulus, film density, crystal texture, and resistivity were analyzed in terms of key deposition characteristics (incident atom kinetic energy and incidence angle) predicted by binary-collision, kinematic Monte Carlo simulations. The study revealed improved hardness, parabolic resistivity dependence on composition, and compositional and process dependencies of film tarnishing. The results are discussed in the context of variations in microstructure and film density. Transmission electron microscopy and X-ray diffraction demonstrate several forms of compositional variation including solute segregation to grain boundaries as well as periodic, intragranular compositional modulations. Annealing of a Cu-rich alloy film exhibiting grain boundary segregation showed that this as-deposited, compositional variation is not stable above 100 °C. Finally, the Cu-Ag system is shown to have potential for hard, conductive, tarnish-resistant and room temperature-stable nanocrystalline thin films across the composition space.

36 MATERIALS SCIENCE↗

Synthesis of Antiperovskite Solid Electrolytes: Comparing Li 3 SI, Na 3 SI, and Ag 3 SI

Prior calculations have predicted that chalcohalide anti-perovskites may exhibit enhanced ionic mobility compared to oxyhalide anti-perovskites as solid-state electrolytes. Herein, the synthesis of Ag-, Li- and Na-based chalcohalide anti-perovskites is investigated using first-principle calculations and in situ synchrotron X-ray diffraction. These techniques demonstrate that the formation of Ag 3 SI is facilitated by the adoption of a common body centered cubic packing of S 2– and I – in the reactants and products at elevated temperatures, with additional stabilization achieved by the formation of a solid solution of the anions. Further, the absence of these two features appears to hinder the formation of the analogous Li and Na anti-perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A 2 MnXO 4 Family (A = Li, Na, Ag; X = Si, Ge): Structural and Magnetic Properties

Four new manganese germanates and silicates, A 2 MnGeO 4 (A = Li, Na) and A 2 MnSiO 4 (A = Na, Ag), were prepared, and their crystal structures were determined using the X-ray Rietveld method. All of them contain all components in tetrahedral coordination. Li 2 MnGeO 4 is orthorhombic (Pmn2 1 ) layered, isostructural with Li 2 CdGeO 4 , and the three other compounds are monoclinic (Pn) cristobalite-related frameworks. As in other stuffed cristobalites of various symmetry (Pn A 2 MXO 4 , Pna2 1 and Pbca AMO 2 ), average bond angles on bridging oxygens (here, Mn–O–X) increase with increasing A/X and/or A/M radius ratios, indicating the trend to the ideal cubic (Fd$ \overline{3}\ $m) structure typified by CsAlO 2 . The sublattices of the magnetic Mn 2+ ions in both structure types under study (Pmn2 1 and Pn) are essentially the same; namely, they are pseudocubic eutaxy with 12 nearest neighbors. The magnetic properties of the four new phases plus Li 2 MnSiO4 were characterized by carrying out magnetic susceptibility, specific heat, magnetization, and electron spin resonance measurements and also by performing energy-mapping analysis to evaluate their spin exchange constants. Ag 2 MnSiO 4 remains paramagnetic down to 2 K, but A 2 MnXO 4 (A = Li, Na; X = Si, Ge) undergo a three-dimensional antiferromagnetic ordering. All five phases exhibit short-range AFM ordering correlations, hence showing them to be low-dimensional magnets and a magnetic field induced spin-reorientation transition at T < TN for all AFM phases. We constructed the magnetic phase diagrams for A 2 MnXO 4 (A = Li, Na; X = Si, Ge) on the basis of the thermodynamic data in magnetic fields up to 9 T. The magnetic properties of all five phases experimentally determined are well explained by their spin exchange constants evaluated by performing energy-mapping analysis.

36 MATERIALS SCIENCE↗

Phase Transition and Liquid-like Superionic Conduction in Ag 2 S

Superionic conductivity in certain polymorphs of Ag 2 S has inspired numerous concepts for materials applications, but the relationship between the structure and the mobility of silver ions remains poorly explored. In this paper, we report ab initio molecular dynamics simulations for low- (acanthite) and high-temperature (argentite) Ag 2 S polymorphs that reveal the dynamical processes, giving rise to the superionic behavior in the latter. Similarities between their sulfur sublattices enable simulations of silver ion diffusivities and pathways on essentially an equal footing. For the higher temperature polymorph, calculated temperature-dependent mean square displacements and activation energies by the nudged elastic band method show good correspondence with expectations from the experiment. In the superionic state, silver atoms diffuse in a liquid-like behavior with no preferred diffusion pathways, within the relatively stable body-centered cubic sulfur framework. Conversely, conduction in acanthite appears to depend more on the mobilities of electronic charge carriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Observation of Hydroxyls Formed from Water and Oxygen on Ag(100)

The interaction of oxygen with silver is a key descriptor of the catalytic reactivity of silver nanoparticles which are ubiquitous in large-scale partial oxidation reactions like ethylene epoxidation. Despite Ag(100) being proposed as the most selective facet, it is less studied than (111) and (110) surfaces. Using scanning tunneling microscopy and synchrotron X-ray photoelectron spectroscopy, we report that, in addition to the well-known O adatoms formed from O 2 dissociation on Ag(100), hydroxyl groups (OH), at a binding energy of ∼ 531 eV, are also present. The O/OH ratio depends on exposure to water and surface temperature. These assignments are consistent with our density functional theory calculations, which indicate that the formation of two OH groups from an O atom and H 2 O molecule is exothermic. These results indicate that, in addition to O, OH is present even under ultrahigh vacuum conditions and therefore should be considered in proposed catalytic pathways.

36 MATERIALS SCIENCE↗

Atom Probe Tomography Analysis of Ag Doping in 2D Layered Material (PbSe) 5 (Bi 2 Se 3 ) 3

Impurity doping in two-dimensional (2D) materials can provide a route to tuning electronic properties, so it is important to be able to determine the distribution of dopant atoms within and between layers. Here we report the totnographic mapping of dopants in layered 2D materials with atomic sensitivity and subnanometer spatial resolution using atom, probe tomography (APT). Also, APT analysis shows that Ag dopes both Bi 2 Se 3 and PbSe layers in (PbSe) 5 (Bi 2 Se 3 ) 3 , and correlations :in the position of Ag atoms suggest a pairing across neighboring Bi 2 Se 3 and PbSe layers. Finally, density functional theory (DFT) calculations confirm the favorability of substitutional-doping for both Pb and Bi and provide insights into the,observed spatial correlations in dopant locations.

2D materials↗

Superior Piezo-/Ferro-Electricity in Antiferroelectric Ag x NbO 3-δ Thin Films by Nanopillar Local Structure Design

Antiferroelectrics are fundamental mother compounds critical in developing innovative lead-free piezoelectrics and ferroelectrics and hold great promise for wide-ranging applications in energy conversion and electronic devices. However, harnessing their superior properties presents a significant challenge due to the delicate balance required between their various states. Here, in this study, through the unique design of nanopillar structures to alleviate the local polar heterogeneity, we have achieved significantly improved piezo-/ferro-electricity in classic lead-free antiferroelectric Ag x NbO 3-δ (x = 1, 0.9, and 0.8) epitaxial thin films. The effective piezoelectric coefficient reaches 440 pm V –1 , 1 order of magnitude larger than the stoichiometric AgNbO 3 , rivaling classic lead zirconate titanate piezoelectrics. Atomic-scale electron microscopy investigations unravel the underlying mechanisms. The nanopillars, characterized by antisite occupancy of both Ag and Nb atoms and forming out-of-phase boundaries with the matrix, reduce the local crystal symmetry via interphase strain. This leads to the creation of flexible multinanodomain structures that significantly facilitate polarization rotation, thus substantially enhancing the piezoelectric performance. This study demonstrates the feasibility of engineering local heterogeneity through nanopillar design, offering a generally applicable method for property improvement of a wide range of antiferroelectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly Conductive Ag Paste for Recoverable Wiring and Reliable Bonding Used in Stretchable Electronics

Stretchable wiring and stretchable bonding between rigid chip/component and stretchable substrate are two of the key factors for stretchable electronics. Here, a low cost and highly stretchable paste is developed with Ag micro flakes and PDMS, which can be used to fabricate stretchable wirings and bondings under a low curing temperature of 100 °C with printing method. Recoverabilities as recovery time and recovery resistance of the wirings and bondings are defined and discussed. The wiring with a low resistivity of 8.7 × 10-5 ·cm shows much better recoverability than nanowire based wirings due to the flake nature of the Ag particles. When stretched to 50% and 100% of strain, the resistance of the patterned wiring increases to only 1.1 and 2.1 times, respectively. Moreover, the resistance of the wiring during 20% tensile cyclic test remains within 1.1 times even after 1000 cycles, showing long time durability. On the other hand, the paste is also used as a bonding material to assemble a zero-Ohm chip on the stretchable substrate to fabricate a stretchable demo, whose resistance increased to only 1.9 times when stretched to 50% of strain. The developed pastes can be expected to make various stretchable wirings, bondings and packaging structures by simple printing process, enabling mass production of stretchable electronic devices.

Li, Cai Fu↗

Efficient Luminescence Enhancement of Mg{sub 2}TiO{sub 4}:Mn{sup 4+} Red Phosphor by Incorporating Plasmonic Ag@SiO{sub 2} Nanoparticles

One of prospective ways for boosting efficiency of luminescent materials is their combination with noble metal nanoparticles. Collective, so-called plasmon, oscillations of surface electrons in a nanoparticle can resonantly interact with incident or fluorescent light and cause an increase in the light absorption cross section or radiative rate for an adjacent emitter. Plasmonic inorganic phosphors require gentle host crystallization at which added noble nanoparticles will not suffer from aggregation or oxidation. The prospective plasmonic Mg{sub 2}TiO{sub 4}:Mn{sup 4+} phosphor containing core@shell Ag@SiO{sub 2} nanoparticles is prepared here by spare low-temperature annealing of a sol-gel host precursor. It is revealed that Mn{sup 4+} luminescence nonmonotonously depends on the size and concentration of 40 and 70 nm silver nanoparticles. It is demonstrated that luminescence of the Mg{sub 2}TiO{sub 4}:Mn{sup 4+} phosphor can be up to a 1.5 times increase when Mn{sup 4+} excitation is supported by localized surface plasmon resonance in Ag@SiO{sub 2} nanoparticles. © 2019 American Chemical Society.

60 APPLIED LIFE SCIENCES↗

Broadband Plasmonic Photocurrent Enhancement from Photosystem I Assembled with Tailored Arrays of Au and Ag Nanodisks

Plasmonic interactions between metal nanostructures and fluorophores have been increasingly employed to alter photoexcitation pathways in multichromophore photosynthetic proteins like photosystem I (PSI). Our recent experimental studies demonstrated a sixfold plasmon-enhanced photocurrent from PSI assembled on Fischer patterns of Ag nanopyramids. However, lack of control over the specific resonance modes limited the magnitude and selectivity of the plasmonic enhancement. To this end, the present study investigates the excitation wavelength-dependent plasmon-enhanced photocurrents from PSI immobilized around highly ordered Au (AuND) and Ag (AgND) nanodisks with dipolar plasmon resonances that are tuned to ~680 and 560 nm, respectively. Specifically, we report plasmon-induced photocurrent enhancements of ~6.8 and 17.5 for excitation wavelengths of ~680 and 565 nm, respectively, as compared to PSI assembled on planar ITO substrates. We also report the action spectra for photocurrent enhancements recorded over wavelengths of 395–810 nm with nine discrete LED light sources. The results indicate the following: (1) concurrence between the photocurrent-enhancement spectra from PSI assemblies and the plasmonic resonances for the respective nanopatterned substrates, and (2) broadband photocurrent enhancements due to plasmon-coupled photoactivation in the otherwise blind chlorophyll regions of the native PSI absorption spectra. Lastly, these intriguing findings pave the path for rational assembly of future biohybrid structures composed of natural light-harvesting antennae and plasmonic metal nanostructures.

36 MATERIALS SCIENCE↗

Tracking the Dynamics of a Ag-MnO x Oxygen Reduction Catalyst Using In Situ and Operando X-ray Absorption Near-Edge Spectroscopy

Sustainable electricity generation via hydrogen fuel cells requires the development of efficient oxygen reduction reaction (ORR) catalysts. In situ/operando experiments are necessary to uncover the extent of dynamic material changes during catalysis. Herein, we use in situ/operando X-ray absorption near-edge spectroscopy to track Mn valence changes of a promising, ultrathin, porous MnO x layer on a Ag thin film. Mn–K-edge measurements as a function of electrochemical environment and ORR conditions reveal that, interestingly, when driving the ORR at 0.8 VRHE, the Mn is distinctively more reduced and the MnO x redox is nonreversible in contrast to measurements in N 2 -saturated electrolyte. Ex situ inductively coupled plasma mass spectrometry, atomic force microscopy, and X-ray photoelectron spectroscopy indicate that these phenomena do not correlate to metal dissolution but might be associated with morphological surface reconstruction related to Ag valency. Furthermore, this study highlights how the microenvironment and catalysis play a key role in the in situ/operando surface structure and chemical state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Minimum Free-Energy Shapes of Ag Nanocrystals: Vacuum vs Solution

Here, we use two variants of replica-exchange molecular dynamics (MD) simulations, parallel tempering MD and partial replica exchange MD, to probe the minimum free-energy shapes of Ag nanocrystals containing 100–200 atoms in a vacuum, ethylene glycol (EG) solvent, and EG solvent with a PVP polymer containing 100 repeat units. Our simulations reveal a shape intermediate between a Dh and an Ih, a Dh-Ih, that has distinct structural signatures and magic sizes. We find several prominent features associated with entropy: pure FCC nanocrystals are less common than FCC crystals containing stacking faults, and crystals with the minimum potential energy are not always preferred over the range of relevant temperatures. The shapes of the nanocrystals in solution are influenced by the chemical identities of the solution-phase molecules. Comparing Ag nanocrystal shapes in EG to those in an EG+PVP solution, we find more icosahedra in EG and more decahedra in EG+PVP across all of the nanocrystal sizes probed in this study. At certain critical sizes, nanocrystal shapes can change dramatically with the addition and removal of a single atom or with a change in temperature at a fixed size. The information in our study could be useful in efforts to devise processing routes to achieve selective nanocrystal shapes.

36 MATERIALS SCIENCE↗

Growth Mechanism of Five-Fold Twinned Ag Nanowires from Multiscale Theory and Simulations

Five-fold twinned metal nanowires can be synthesized with high aspect ratios via solution-phase methods. The origins of their anisotropic growth, however, are poorly understood. Here, we combine atomic-scale, mesoscale, and continuum theoretical methods to predict growth morphologies of Ag nanowires from seeds and to demonstrate that high aspect ratio nanowires can originate from anisotropic surface diffusion induced by the strained nanowire structure. Nanowire seeds are similar to Marks decahedra, with {111} “notches” that accelerate diffusion along the nanowire axis to facilitate one-dimensional growth. The strain distribution on the {111} facets induces heterogeneous atom aggregation and leads to atom trapping at the nanowire ends. We predict that decahedral Ag seeds can grow to become nanowires with aspect ratios in the experimental range. Our studies show that there is a complex interplay between atom deposition, diffusion, seed architecture, and nanowire aspect ratio that could be manipulated experimentally to achieve controlled nanowire syntheses.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The anomalous thermal expansion of cuprites (Cu{sub 2}O and Ag{sub 2}O) : a combined high resolution pair distribution function and geometric analysis.

The temperature-dependent local structures of cuprites (M{sub 2}O for M = Cu{sup I}, Ag{sup I}) have been probed using variable-temperature (80-500 K) high-resolution pair distribution function (PDF) analysis of X-ray scattering data measured to very high values of momentum transfer (Q{sub max} = 35 {angstrom}{sup -1}). These noble metal oxides exhibit negative thermal expansion (NTE) behavior; however, several unusual structural features and behaviors distinguish the cuprites from other NTE frameworks the structure is inverted relative to conventional NTE frameworks and Cu{sub 2}O (but not Ag{sub 2}O) shows an unusual transition from negative to positive thermal expansion behavior at higher temperature thus motivating the present in-depth analysis of the particular thermal expansion mechanisms operating here. By coupling the local structural information from the PDFs with known geometric identities of the tetrahedra that form the framework, distortions contributing to NTE have been identified and the contrasting high temperature behaviors of the two isostructural analogues have been accounted for. Specifically, we demonstrate that thermal population of low-energy vibrational modes involving the dynamic distortion of the OM{sub 4} tetrahedra, away from the regular tetrahedral geometry (through M-O-M{prime} bending), can induce a contraction of the average tetrahedral edge length (M...M{prime}) and thus contribute to the NTE effect. This mechanism operates in combination with the transverse vibrational mechanism found in conventional NTE frameworks, where increasing transverse displacement of the bridging atom (O-M-O{prime}) draws corner-bridged polyhedra closer together.

36 MATERIALS SCIENCE↗

Chemical Modifications of Ag Catalyst Surfaces with Imidazolium Ionomers Modulate H 2 Evolution Rates during Electrochemical CO 2 Reduction

Bridging polymer design with catalyst surface science is a promising direction for tuning and optimizing electrochemical reactors that could impact long-term goals in energy and sustainability. Particularly, the interaction between inorganic catalyst surfaces and organic-based ionomers provides an avenue to both steer reaction selectivity and promote activity. In this work, we studied the role of imidazolium-based ionomers for electrocatalytic CO 2 reduction to CO (CO 2 R) on Ag surfaces and found that they produce no effect on CO 2 R activity yet strongly promote the competing hydrogen evolution reaction (HER). By examining the dependence of HER and CO 2 R rates on concentrations of CO 2 and HCO 3 –, we developed a kinetic model that attributes HER promotion to intrinsic promotion of HCO 3 – reduction by imidazolium ionomers. We also show that varying the ionomer structure by changing substituents on the imidazolium ring modulates the HER promotion. This ionomer-structure dependence was analyzed via Taft steric parameters and density functional theory calculations, which suggest that steric bulk from functionalities on the imidazolium ring reduces access of the ionomer to both HCO 3 – and the Ag surface, thus limiting the promotional effect. Our results help develop design rules for ionomer–catalyst interactions in CO 2 R and motivate further work into precisely uncovering the interplay between primary and secondary coordination in determining electrocatalytic behavior.

36 MATERIALS SCIENCE↗

Machine-Learning Prediction of CO Adsorption in Thiolated, Ag-Alloyed Au Nanoclusters

Here we propose a machine-learning model, based on the random-forest method, to predict CO adsorption in thiolate protected nanoclusters. Two phases of feature selection and training, based initially on the Au 25 nanocluster, are utilized in our model. One advantage to a machine-learning approach is that correlations in defined features disentangle relationships among the various structural parameters. For example, in Au 25 , we find that features based on the distribution of Ag atoms relative to the CO adsorption site are the most important in predicting adsorption energies. Our machine-learning model is easily extended to other Au-based nanoclusters, and we demonstrate predictions about CO adsorption on Ag-alloyed Au 36 and Au 133 nanoclusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗