Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “10-Be”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Rheology and engine performance of very low sulfur fuel oil blended with 10% fast pyrolysis and hydrothermal liquefaction oils in a 2-stroke crosshead engine

The performance and emissions for a downscaled single-cylinder 2-stroke crosshead engine were determined for a very low sulfur fuel oil (VLSFO) when blended with 10 wt.% fast pyrolysis (FP) or hydrothermal liquefaction (HTL) bio-intermediates. The FP and HTL oils were derived from biomass and were observed to contain lower molecular weight (MW) hydrocarbons than neat VLSFO (which was evaluated as a baseline comparison). The addition of either biofuel reduced the overall viscosity of the VLSFO. Aging tests at 50, 90, and 120°C showed that the dynamic viscosity of VLSFO increased with exposure time up to two weeks. Similar trends were observed for the FP and HTL blends, but a pronounced spike in viscosity occurred for these fuels during the early period of exposure. None of the viscosity increases exceeded the operational limits of fuel system pumps. Engine performance studies were conducted under low, medium and high load operational settings. The relative performance of the test fuels was highly dependent on operating condition. In general, the engine results for the three test fuels were similar, but modest improvements in brake thermal efficiency and brake specific fuel consumption were observed, which may be attributed to the heightened reactivity of low molecular weight fraction of the FP and HTL oils.

09 BIOMASS FUELS↗
DOE OSTI2019

Review of the 10 th Non-LTE Code Comparison Workshop

This work reports on the results of the 10 th Non-LTE code comparison workshop, which was held at the University of San Diego campus November 28 through December 1, 2017. Non-equilibrium collisional-radiative models predict the electronic state populations and attendant emission and absorption characteristics of hot, dense matter and are used to help design and diagnose high-energy-density experiments. At this workshop, fifteen codes from eleven institutions contributed results for steady-state and time-dependent neon, aluminum, silicon, and chlorine cases relevant to a variety of high-density experimental and radiation-driven astrophysical systems. We focus on differences in the predictions from codes with different internal structure, completeness, density effects, and rate fidelity and the impact of those differences on hot, dense plasma diagnostics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

System-of-systems optimization of hydrogen infrastructure for heavy-duty freight corridors: The interstate 10 case study

Medium and heavy-duty freight transportation requires hydrogen energy infrastructure that is cost-effective, operationally reliable, spatially coherent, and resilient to demand variability along major corridors. This paper presents an integrated hydrogen corridor planning framework using Oak Ridge National Laboratory's OR-AGENT that couples freight-driven, route-resolved hydrogen demand modeling with optimized station siting, sizing, and station-level techno-economic analysis. The framework is demonstrated for the Interstate 10 freight corridor and the Houston-to-Los-Angeles region. Hydrogen demand is derived from high-resolution origin–destination freight data, duty-cycle characterization, and physics-based energy consumption modeling. Candidate refueling sites are selected from existing heavy-duty diesel fueling locations and optimized subject to onboard storage and station capacity constraints. Resulting station throughputs are evaluated using established techno-economic models for electrolytic hydrogen production and dispensing infrastructure. Results show that a regional, portfolio-level aggregation, average dispensed electrolytic hydrogen cost of $6.87–$7.26/kg is currently feasible, and is strongly influenced by demand density and utilization.

Sujan, Vivek [ORNL] (ORCID:0000000269882342)↗
DOE OSTI2021

Comparative Effectiveness Research in Localized Prostate Cancer: A 10-Year Follow-up Cohort Study

Long-term comparative effectiveness research on localized prostate cancer treatments is scarce, and evidence is lacking especially for brachytherapy. The aim of this study was to assess the long-term impact of the side effects of radical prostatectomy, brachytherapy, and external radiation therapy on patients with localized prostate cancer at 10 years, using propensity score analyses.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

The effect of 10 at.% Al addition on the hydrogen storage properties of the Ti 0.33 V 0.33 Nb 0.33 multi-principal element alloy

We report here a thorough study on the effect of 10 at.% Al addition into the ternary equimolar Ti 0.33 V 0.33 Nb 0.33 alloy on the hydrogen storage properties. Despite a decrease of the storage capacity by 20%, several other properties are enhanced by the presence of Al. The hydride formation is destabilized in the quaternary alloy as compared to the pristine ternary composition, as also confirmed by machine learning approach. The hydrogen desorption occurs at lower temperature in the Al-containing alloy relative to the initial material. Moreover, the Al presence improves the stability during hydrogen absorption/desorption cycling without significant loss of the capacity and phase segregation. Finally, this study proves that Al addition into multi-principal element alloys is a promising strategy for the design of novel materials for hydrogen storage.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Solid-solid phase transition via the liquid in a Pd 43 Cu 27 Ni 10 P 20 bulk metallic glass under conventional conditions

The microscopic mechanism of solid-solid phase transitions is a long-standing fundamental issue in materials science. Here we directly report the experimental evidence of the existence of an intermediate liquid during the solid-solid phase transition in a bulk Pd 43 Cu 27 Ni 10 P 20 alloy by in situ high temperature high energy X-ray diffraction, combined with the differential scanning calorimetry at slow heating rates down to 5 K/min. We elucidate that this intermediate liquid is attributed to the melting of the low-melting-point crystalline phases, rather than induced by the elastic stress energy along the interface proposed in literatures. This could also be a general feature in multicomponent alloys if a low-melting-point crystalline phase is formed together with other crystalline phases during heating. Furthermore, all results obtained here are scientifically sound and provide new insight into the phase transition theory, which will trigger more studies on the microscopic mechanism of solid-solid phase transition via an intermediate liquid.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Local atomic configurations in mechanically alloyed amorphous (FeCoNi) 70 Ti 10 B 20 powders

Here, the atomic structure of amorphous (FeCoNi) 70 Ti 10 B 20 alloy synthesized by mechanical alloying was investigated using high energy synchrotron X-ray diffraction and inverse Monte Carlo simulations of pair distribution functions. Empirical potential structure refinement indicates a chemical short-range order at the length scales of 2.1–2.5 Å via local atomic arrangements forming deformed bcc-like clusters. The structural model obtained was described by bond lengths, coordination numbers, and bond angle distribution functions determined for the first neighbor atoms by x-ray scattering supplemented with 3D Monte Carlo simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Homoepitaxial growth of 9,10-diphenylanthracene

Organic single crystals are often shown to have significantly improved optoelectronic properties over polycrystalline thin films such as exciton diffusivity and carrier mobility. There is growing interest in incorporating such crystals in organic electronics despite a number of challenges. In this work, the homoepitaxial vapor phase growth modes for 9,10-diphenylanthracene (DPA) homoepitaxy are mapped as a function of growth rate and temperature using in situ ultra-low current reflection high energy electron diffraction (RHEED), X-ray diffraction (XRD), and atomic force microscopy (AFM). Vapor phase deposition was performed on free-standing single crystal DPA substrates, which show clear Kikuchi patterns. At room temperature, a transition from Frank-Van der Merwe layer-by-layer growth to step-flow growth is observed as the deposition rate is decreased, while at lower temperatures a Stranski-Krastanov layer-plus-island growth is observed. This is the first demonstration of true step-flow growth from room temperature vapor phase deposition for organic semiconductors and is reminiscent of traditional semiconductor growth regimes. Accordingly, these results could lead to improved control over growth and doping of organic single crystals, and lead to enhanced single crystal organic optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

On the transferability of residence time distributions in two 10-km long river sections with similar hydromorphic units

Quantifying hydrologic exchange fluxes (HEFs) at the stream-groundwater interface and their residence time distributions (RTDs) in the subsurface are important for managing the water quality and ecosystem health in dynamic river corridors. However, direct simulating high-spatial resolution HEFs and RTDs can be time-consuming, especially for watershed-scale modeling. Efficient surrogate models linking RTDs to hydromorphic units (HUs) can be alternatives for simulating RTDs in large-scale models. A common concern of these surrogate models, though, is the transferability of the relationship between the RTDs and HUs from one river corridor to another. To address this issue, this work evaluates the HEFs and resulting RTD-HU relationships for two 10-km long river corridors along the Columbia River leveraging a one-way coupled three-dimensional transient surface-subsurface water transport modeling framework we previously developed. Applying such a framework at the two river corridors with similar HUs allows for quantitative comparisons of HEFs and RTDs using both statistical tests and machine learning classification models. Finally, our comparison shows that the similarity and transferability of the RTD-HU relationship is very low for the two investigated river sections, which suggests that devising a general algorithm to estimate RTDs based solely on surface water hydrodynamics and short-distance river channel topography data, as well as HU classification, might be nearly impossible.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Phase transformations and thermal expansion coefficients of unirradiated U-X wt.% Zr (X = 6, 10, 20, 30) measured via neutron diffraction

This work characterizes the crystallographic evolution of unirradiated U-X wt.% Zr (X = 6, 10, 20, 30) while cooling from equilibration, single phase γ-U-Zr, at 900 °C to ambient temperature using time-of-flight neutron diffraction. The β-U phase was unobserved during cooling at 1 °C/min in all alloys. All alloys followed the phase transformation pathway of γ-U-Zr→γ-U-Zr+α-U→α-U +δ-UZr2 with an observed miscibility gap in γ-U-Zr. The α-U and δ-UZr2 transformation took place simultaneously in the U-30 wt.% Zr sample. These findings strengthen the need to re-approach the U-Zr phase diagram in entirety. Bulk volumetric CTEs agree well with published data, strengthening the quantification of lattice-specific CTEs reported in this study. A compositionally dependent discontinuity in thermal expansion, increasing in magnitude with decreasing U content, occurs during the γ-U-Zr→α-U+δ-UZr2 transformation. The γ-U-Zr lattice parameter was measured to have a compositional dependency.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of cobalt substitution on structure and magnetic properties of Nd 0.4 Zr 0.6 Fe 10–x Co x Si 2 (x = 0–3) alloys and their ribbons

This paper reports the stabilization of the RFe 12 -type based compounds where part of R and Fe are substituted with Zr and Co and Si, respectively, in order to examine whether these rare-earth-lean materials are suitable for applications as permanent magnets. Structural and magnetic characterization of the family of alloys with the general formula Nd 0.4 Zr 0.6 Fe 10–x Co x Si 2 (x = 0–3) and their melt-spun ribbons were carried out using X-ray diffraction and Mössbauer spectroscopy. The ThMn 12 -type structure is obtained for all samples as the majority phase with a minority α-Fe(CoSi) phase (less than 5 wt%) as it was estimated by XRD for x = 1 and 2. The Curie temperature increases linearly with Co substitution from 561 K for x = 0 to 712 K for x = 3. The saturation magnetization decreases slightly from 130.5 (x = 1) to 129.1 A·m 2 /kg (x = 3), while the anisotropy field is following the same trend.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Friction surface layer deposition of triple-phase Al 10 Cr 12 Fe 35 Mn 23 Ni 20 high entropy alloy: Process optimization and microstructural evolution

A high-strength Co-free triple-phase Al 10 Cr 12 Fe 35 Mn 23 Ni 20 high-entropy alloy (HEA) was successfully fabricated using Friction Surface Layer Deposition (FSLD), a bulk manufacturing method. Multiple single-layer deposits were produced by varying forging force (F) and traverse speeds (T r ) to optimize the process parameters. The optimized conditions (F = 40 kN & T r = 200 mm/min) were then applied to manufacture a scaled-up multi-layer specimen. The initial microstructure of the HEA consisted of coarse grains of the soft FCC-phase, long columnar dendrites of the hard BCC-phase, and small precipitates of the harder B2-phase within the BCC-dendrites. During FSLD, the FCC-matrix underwent continuous dynamic recrystallization due to high-temperature severe plastic deformation, forming finer equiaxed grains. Simultaneously, the BCC-dendrites fractured into smaller fragments, some of which experienced partial growth and coarsening under applied stress, resulting in an hourglass morphology. In contrast, the small B2-precipitates within the BCC-fragments dissolved during the elevated temperatures of FSLD and reprecipitated as substantially finer precipitates during continuous cooling post-FSLD. Additionally, the orientation relationships between the FCC and BCC/B2 phases were completely destroyed by the severe thermoplastic deformation inherent to FSLD. The microstructural refinements led to a substantial improvement in hardness from 177 HV to 283 HV, driven by Hall-Petch strengthening. The increased number of interfaces, including coherent BCC-B2 interfaces, potentially enhances the sink strength and radiation tolerance of the HEA, making it a promising candidate for nuclear applications. In conclusion, this study also highlights FSLD as a versatile technique for achieving tunable properties in HEAs, with detailed schematics illustrating the complex mechanisms of phase transformations during processing.

Additive Manufacturing↗
DOE OSTI2020

Beyond the acceptance limit of DRAGON: The case of the 6 Li(α,γ) 10 B reaction

Radiative capture reactions play a pivotal role for our understanding of the origin of the elements in the cosmos. Recoil separators provide an effective way to study these reactions, in inverse kinematics, and take advantage of the use of radioactive ion beams. However, a limiting factor in the study of radiative capture reactions in inverse kinematics is the momentum spread of the product nuclei, which can result in an angular spread larger than the geometric acceptance of the separator. The DRAGON facility at TRIUMF is a versatile recoil separator, designed to study radiative capture reactions relevant to astrophysics in the A~10–30 region. In this work we present the first attempt to study with DRAGON a reaction, 6 Li(α, γ) 10 B, for which the recoil angular spread exceeds DRAGON’s acceptance. Furthermore, our result is in good agreement with the literature value, showing that DRAGON can measure resonance strengths of astrophysically important reactions even when not all the recoils enter the separator.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Dynamic characterization and performance evaluation of a 10-kW power take-off with mechanical motion rectifier for wave energy conversion

The power take-off (PTO) is a key component for wave energy converters. In this paper, a compact PTO with mechanical motion rectification rated at 10 kW is designed and prototyped, and characterized. A piecewise nonlinear dynamic model is established to describe its unique dynamic property. A linear hydraulic actuator is adopted in lab testing to drive the prototype and the unknown parameters of the dynamic model are identified. Further verification shows that the model can predict the dynamic performance of the PTO well. The test results show that the mechanical motion rectifier-based PTO can achieve overall energy transfer efficiency as high as 65% in regular waves even when the generator is working below the rated electric load and speed. In the irregular wave test, the PTO achieved the overall energy transfer efficiency of 54%, and the peak-to-average ratio acquired during the test is 12.5.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Simultaneous 10 kHz three-dimensional CH 2 O and tomographic PIV measurements in a lifted partially-premixed jet flame

High-speed, three-dimensional (3D) scalar-velocity field measurements are demonstrated in a lifted partially-premixed dimethyl-ether/air jet flame using simultaneous laser-induced fluorescence (LIF) of formaldehyde (CH 2 O) and tomographic particle image velocimetry (TPIV). The 3D LIF measurements are performed by raster scanning the laser beam from a 100 kHz pulse-burst laser across the probe volume using an acousto-optic deflector. The volumetric reconstruction of the LIF signal from ten parallel planes provides quasi-instantaneous 3D LIF measurements that are synchronized with 10 kHz TPIV measurements. Here, the temporally resolved CH 2 O-LIF and velocity field data are used to analyze Lagrangian particle trajectories and displacement speeds at the base of the lifted flame. The particle trajectories reveal flow structures that are difficult to observe in an Eulerian reference frame. Positive and negative displacement speeds are observed at the CH 2 O-LIF surfaces at the inner and outer regions of the jet flame with a maximum displacement speed of approximately eight times the laminar flame speed of a stoichiometric dimethyl-ether/air mixture. The observations in present study support formation of lean premixed flames near the flame base whose role in flame stabilization should be investigated in more detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cosmogenic surface exposure ( 10 Be) dating of raised beaches in Marguerite bay, Antarctic Peninsula: Implications for relative sea-level history

Understanding the dynamics of ice mass loss in polar regions is crucial for deciphering climate change and Glacio Isostatic Adjustment patterns. This study focuses on Marguerite Bay, located in the south-central Antarctic Peninsula. We dated raised beaches to investigate relative sea-level changes using the cosmogenic surface exposure ( 10 Be) method. Previous studies have provided valuable insights into the region's glacial history, but limitations in dating techniques and age estimates necessitate further investigation. By analysing raised shingle beaches in Gaul Cove of Horseshoe Island and the southern coast of Calmette Bay, this research aims to contribute relative sea-level change history for these areas. In Horseshoe Island's Gaul Cove, raised beaches clustered on prominent steps reveal a 15 m relative sea-level change over the last 3.31 ka. Differently, Calmette Bay exhibits a 36 m relative sea-level fall over the last 7.29 ka. Finally, these findings indicate significant and differential glacial-isostatic adjustments in both regions during the middle and late Holocene. Additionally, our data reveal accelerated sea-level fall periods corresponding to Holocene deglaciation and glacial advance events, indicating the shorelines' relative sea-level change sensitivity to climate change.

58 GEOSCIENCES↗
DOE OSTI2021

H 2 production in the 10 B(n,α) 7 Li reaction in water

Herein we demonstrate a method for measuring the H2 produced in water from the 10 B(n,α) 7 Li fission reaction. Low energy neutrons from the NIST Center for Neutron Research interact with borate-containing water in a temperature-controlled high pressure cell made from titanium. After exposure for one to several hours, the water is extracted and sparged with argon. H 2 entrained in the sparging gas is sampled with a small mass spectrometer. To determine the neutron exposure, a small amount of sodium is included in the borate solution. The water is collected and 24 Na activation is measured in a counting apparatus on the following day. The G-value for H 2 at room temperature is found to be (1.18 ± 0.10) molecules H 2 /100eV, in good agreement with previous estimates and recent modeling calculations.

10B↗
DOE OSTI2023

H 2 generation by the 10 B(n,α) 7 Li reaction in high temperature water

H 2 produced in water from the 10 B(n,α) 7 Li fission reaction has been measured up to 300 °C. Thermal energy neutrons from the Rhode Island Nuclear Science Center's 2 MW reactor interact with boric acid-containing water in temperature-controlled high-pressure cells made from tubing of either titanium or zirconium alloy. After exposure for a minimum of 1 h, the solution sample is extracted and sparged with argon. The H 2 entrained by the sparging gas is sampled with a small mass spectrometer. A small amount of sodium is included in the boric acid solution so that after sparging, samples can be collected for 24 Na activation measurements in a gamma spectrometer to determine the neutron exposure and thus the total energy deposited in solution. The G-value (μmol/J) for H 2 production is obtained for water at a pressure of 25 MPa, over a temperature range from 20 °C to 300 °C. The weak temperature dependence of this yield between 150 °C and 200 °C demonstrates that the bimolecular reaction of pairs of e$^{–}_{aq}$ is a very minor source of H 2 in high LET tracks.

10B↗