Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Further comparison of wind tunnel and airplane acoustic data for advanced design high speed propeller models

Comparisons were made between the SR-2 and SR-3 model propeller noise data taken in the NASA 8-by-6 wind tunnel, in the United Technologies Research Center (UTRC) anechoic tunnel, and with boom and fuselage microphones on the NASA Jetstar airplane. Plots of peak blade passage tone noise versus helical tip Mach number generally showed good agreement. The levels of the airplane fuselage data were somewhat lower than the boom data by an approximately uniform value. The curve shapes were similar except for the UTRC data which was flatter than the other sets. This was attributed to the UTRC data being taken at constant power while the other data were taken at constant advance ratio. General curves of the peak blade passage tone versus helical tip Mach number fit through all the data are also presented. Directivity shape comparisons at the cruise condition were similar for the airplane and 8-by-6 tunnel data. The UTRC data peaked farther forward but, when an angle correction was made for the different axial Mach number used in the UTRC tests, the shape was similar to the others. The general agreement of the data from the four configurations enables the formation of a good consensus of the noise from these propellers.

Dittmar, J. H.↗
NASA NTRS1981

Determination of wind from NIMBUS 6 satellite sounding data

Objective methods of computing upper level and surface wind fields from NIMBUS 6 satellite sounding data are developed. These methods are evaluated by comparing satellite derived and rawinsonde wind fields on gridded constant pressure charts in four geographical regions. Satellite-derived and hourly observed surface wind fields are compared. Results indicate that the best satellite-derived wind on constant pressure charts is a geostrophic wind derived from highly smoothed fields of geopotential height. Satellite-derived winds computed in this manner and rawinsonde winds show similar circulation patterns except in areas of small height gradients. Magnitudes of the standard deviation of the differences between satellite derived and rawinsonde wind speeds range from approximately 3 to 12 m/sec on constant pressure charts and peak at the jet stream level. Fields of satellite-derived surface wind computed with the logarithmic wind law agree well with fields of observed surface wind in most regions. Magnitudes of the standard deviation of the differences in surface wind speed range from approximately 2 to 4 m/sec, and satellite derived surface winds are able to depict flow across a cold front and around a low pressure center.

Carle, W. E.↗
NASA NTRS1985

Use of ground-based wind profiles in mesoscale forecasting

A brief review is presented of recent uses of ground-based wind profile data in mesoscale forecasting. Some of the applications are in real time, and some are after the fact. Not all of the work mentioned here has been published yet, but references are given wherever possible. As Gage and Balsley (1978) point out, sensitive Doppler radars have been used to examine tropospheric wind profiles since the 1970's. It was not until the early 1980's, however, that the potential contribution of these instruments to operational forecasting and numerical weather prediction became apparent. Profiler winds and radiosonde winds compare favorably, usually within a few m/s in speed and 10 degrees in direction (see Hogg et al., 1983), but the obvious advantage of the profiler is its frequent (hourly or more often) sampling of the same volume. The rawinsonde balloon is launched only twice a day and drifts with the wind. In this paper, I will: (1) mention two operational uses of data from a wind profiling system developed jointly by the Wave Propagation and Aeronomy Laboratories of NOAA; (2) describe a number of displays of these same data on a workstation for mesoscale forecasting developed by the Program for Regional Observing and Forecasting Services (PROFS); and (3) explain some interesting diagnostic calculations performed by meteorologists of the Wave Propagation Laboratory.

Schlatter, Thomas W.↗
NASA NTRS1987

Solar cycle invariance in solar wind proton temperature relationships

The relationships between solar wind proton temperature and velocity and between temperature and momentum flux density at 1 AU are examined using National Space Science Data Center IMP 8 solar wind data obtained from late 1984 to early 1985. These relationships are compared with similar ones obtained from a variety of solar wind data spanning 14 years, from 1966 to 1980. It is found that these relationships, particularly the one between temperature and velocity, are very stable over the solar cycles from which these data were drawn. This suggests that the basic physical processes which accelerate and heat the solar wind have remained unchanged for the last 20 years.

Lopez, R. E.↗
NASA NTRS1992

Heat flux dropouts in the solar wind and Coulomb scattering effects

Data on solar wind electrons at the ISEE 3 spacecraft located 0.01 AU upstream from the earth (McComas et al., 1989) showed periods of time when the flux of antisunward suprathermal electrons would decrease suddenly, leading to heat flux dropouts (HFDs). This paper examines data from ISEE 1 at the 1.5 x 10 exp 6 km downstream location to determine whether HFDs identified at ISEE 3 by McComas et al. can be detected at this location and whether the ISEE 1 observations can provide information to one or the other possible interpretations of HFDs: that HFDs are due to enhanced Coulomb scattering, or to disconnection from the sun of the magnetic flux tube. The results of the examination identified the presence of HFD events in the ISEE 1 data, and the findings indicate that Coulomb scattering plays a substantial role in at least some HFD events.

Fitzenreiter, R. J.↗
NASA NTRS1972

Lunar surface magnetometer experiment

The Apollo 15 lunar-surface magnetometer (LSM) is one of a network of magnetometers that have been deployed on the moon to study intrinsic remanent magnetic fields and global magnetic response of the moon to large-scale solar and terrestrial magnetic fields. From these field measurements, properties of the lunar interior such as magnetic permeability, electrical conductivity, and temperature can be calculated. In addition, correlation with solar-wind-spectrometer data allows study of the the solar-wind plasma interaction with the moon and, in turn, investigation of the resulting absorption of gases and accretion of an ionosphere. These physical parameters and processes determined from magnetometer measurements must be accounted for by comprehensive theories of origin and evolution of the moon and solar system.

Dyal, P.↗
NASA NTRS1974

Identification of aircraft stability and control derivatives in the presence of turbulence

A maximum likelihood estimator for a linear system with state and observation noise is developed to determine stability and control derivatives from flight data obtained in the presence of turbulence. The formulation for the longitudinal short-period mode is presented briefly, including a special case that greatly simplifies the problem if the measurement noise on one signal is negligible. The effectiveness and accuracy of the technique are assessed by applying it first to simulated flight data, in which the true parameter values and state noise are known, then to actual flight data obtained in turbulence. The results are compared with data obtained in smooth air and with wind-tunnel data. The complete maximum likelihood estimator, which accounts for both state and observation noise, is shown to give the most accurate estimate of the stability and control derivatives from flight data obtained in turbulence. It is superior to the techniques that ignores state noise and to the simplified method that neglects the measurement noise on the angle-of-attack signal.

Iliff, K. W.↗
NASA NTRS1979

Force and moment data from a wind-tunnel test of a tilt-nacelle V/STOL propulsion system with an attitude control vane

A large scale, tilt nacelle V/STOL propulsion system, with an attitude control vane assembly mounted in the exhaust, was tested. The effectiveness of the control vane as well as the aerodynamic characteristics of the entire propulsion system were determined. The results, in the form of tabulated coefficients, for both the vane forces and moments and the total forces and moments produced by the propulsion system are presented.

Betzina, M. D.↗
NASA NTRS1983

Feasibility study of a procedure to detect and warn of low-level wind shear

The wind shear program is directed toward investigating the effects of wind shear on aerodynamic performance. Combining the Joint Airport Weather Studies wind shear data with the B-57B gust gradient data, the transient scales of motion involved in wind shear aircraft accidents or mishaps are being identified. The effect of variable winds having these time scales on the aerodynamic coefficients of moist airfoils were fully investigated. Transient and spatial variation of flow over the airfoil may cause premature stall or hysteresis effects which significantly impact the lift and drag (i.e., aerodynamic coefficients). Analysis of airfoil performance subject to 4-D variable flows will be carried out.

Frost, W.↗
NASA NTRS1987

Wind Shear/Turbulence Inputs to Flight Simulation and Systems Certification

The purpose of the workshop was to provide a forum for industry, universities, and government to assess current status and likely future requirements for application of flight simulators to aviation safety concerns and system certification issues associated with wind shear and atmospheric turbulence. Research findings presented included characterization of wind shear and turbulence hazards based on modeling efforts and quantitative results obtained from field measurement programs. Future research thrusts needed to maximally exploit flight simulators for aviation safety application involving wind shear and turbulence were identified. The conference contained sessions on: Existing wind shear data and simulator implementation initiatives; Invited papers regarding wind shear and turbulence simulation requirements; and Committee working session reports.

Bowles, Roland L.↗
NASA NTRS1987

Turbulence models

The subject of modeling turbulence for use with the JAWS wind shear data sets is addressed. The present FAA AC 120-41 wind shear models are quasisteady wind models. FAA recommends superimposing upon these winds a Dryden spectrum model of turbulence. For the JAWS data, it must be decided whether this approach is adequate or whether turbulence must be analyzed and modeled differently. This question is discussed in detail.

Frost, Walter↗
NASA NTRS1988

Aeroelastic response of metallic and composite propfan models in yawed flow

An analytical investigation of aeroelastic response of metallic and composite propfan models in yawed flow was performed. The analytical model is based on the normal modes of a rotating blade and the three dimensional unsteady lifting surface aerodynamic theory including blade mistuning. The calculated blade stresses or strains are compared with published wind tunnel data on two metallic and three composite propfan wind tunnel models. The comparison shows a good agreement between theory and experiment. Additional parametric results indicate that blade response is very sensitive to the blade stiffness and also to blade frequency and mode shape mistuning. From these findings, it is concluded that both frequency and mode shape mistuning should be included in aeroelastic response analysis. Furthermore, both calculated and measured strains show that combined blade frequency and mode shape mistuning has beneficial effects on response due to yawed flow.

Kaza, Krishna Rao V.↗
NASA NTRS1988

Aeroelastic response of metallic and composite propfan models in yawed flow

An analytical investigation of aeroelastic response of metallic and composite propfan models in yawed flow was performed. The analytical model is based on the normal modes of a rotating blade and the three-dimensional unsteady lifting surface aerodynamic theory including blade mistuning. The calculated blade stresses or strains are compared with published wind tunnel data on two metallic and three composite propfan wind tunnel models. The comparison shows a good agreement between theory and experiment. Additional parametric results indicate that blade response is very sensitive to the blade stiffness and also to blade frequency and mode shape mistuning. From these findings, it is concluded that both frequency and mode shape mistuning should be included in aeroelastic response analysis. Furthermore, both calculated and measured strains show that combined blade frequency and mode shape mistuning has beneficial effects on response due to yawed flow.

Kaza, Krishna Rao↗
NASA NTRS1993

Comparison of special sensor microwave imager vector wind stress with model-derived and subjective products for the tropical Pacific

An assessment of a new source of vector wind stress data relative to existing analyses of the surface wind field is presented. The large-scale variability of vector wind stress generated by Atlas et al. (1991) and based on the special sensor microwave imager (SSM/I) remotely sensed observations of surface wind speed is compared with five operational and subjectively analyzed wind products across the tropical Pacific basin for the first year of SSM/I, July 1987 through June 1988. The spatial and temporal variability of the zonal component, meridional component, and curl of the wind stress are examined relative to their future use in wind-driven ocean model studies of tropical Pacific Ocean circulation.

Busalacchi, Antonio J.↗
NASA NTRS1993

Rarefied-flow shuttle aerodynamics flight model

A model of the Shuttle Orbiter rarefied-flow aerodynamic force coefficients has been derived from the ratio of flight acceleration measurements. The in-situ, low frequency, low level acceleration measurements are made during atmospheric reentry. The experiment equipment designed and used for this task is the High Resolution Accelerometer Package (HiRAP), one of the sensor packages in the Orbiter Experiments Program. To date, 12 HiRAP reentry mission data sets spanning a period of about 10 years have been processed. The HiRAP derived aerodynamics model is described in detail. The model includes normal and axial hypersonic continuum coefficient equations as functions of angle-of-attack, body flap deflection, and elevon deflection. Normal and axial free molecule flow coefficient equations as a function of angle-of-attack are also presented, along with flight derived rarefied-flow transition bridging formulas. Comparisons are made between the aerodynamics model and data from the Orbiter Operational Aerodynamic Design Data Book, and applicable computer simulations and wind-tunnel data.

Blanchard, Robert C.↗
NASA NTRS1993

Vertical velocity in cirrus case obtained from wind profiler

Cirrus clouds play an important role in the climate and general circulation because they significantly modulate the radiation properties of the atmosphere. However understanding the processes that govern their presence is made difficult by their high altitude, variable thickness, complex microphysical structure, and relatively little knowledge of the vertical motion field. In the FIRE 2 (First International Satellite Cloud Climatology Regional Experiment) experiment, a 404 MHz wind profiler was set up to provide continuous measurements of clear air wind field at Parsons, Kansas. Simultaneously, the NOAA wind profiler network supplied a wider spacial scale observation. On 26 Nov. 1991, the most significant cirrus cloud phenomena during the experiment with a jet streak at 250 Mb occurred. Analyses of the vertical wind velocity are made by utilizing different methods based on wind profiler data, among them the direct measurements from CSU wind profiler and NOAA network wind profilers, VAD (Velocity Azimuth Display) technique and the kinematic method.

Song, Ran↗