SEARCH · Engineering Papers

Results for “wave function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS1995

Observations and physical interpretations of the solar wind flow properties as obtained from white light coronagraph aboard SPARTAN 201-01

The solar corona was observed with an externally occulted White Light Coronagraph (WLC) carried on the SPARTAN 201-1 spacecraft on 11-12 Apr. 1993. With observations from WLC and the ground based Mauna Loa White Light Coronagraph, a large number of polar plumes both in the north and south polar holes were traced from 1.16 to 5.5 Rs. Flow properties of the solar wind in coronal holes have been determined (Habbal et al., 1995) by using a two fluid model constrained by density profiles and scale height temperatures from the white light observations, and interplanetary measurements of the flow speed and proton mass flux from Ulysses' south polar passage. Provisions for acceleration by Alfven waves, as well as electron and proton heating, are included in the momentum and the energy equations respectively. The model computations fit remarkably well the empirical constraints of the two different density structures (plumes and coronal holes) for a range of input parameters. In this study we investigate the physical nature of the heating function used in the two-fluid model. Alfven waves have been suggested as the possible source of heating that accelerates the solar wind (Ofman and Davila, 1995). We utilize the density contrast observed in WLC data in the plume and ambient coronal hole region to estimate the Alfven wave frequencies responsible for heating these structures. The source heating function utilized in the two fluid model of the solar wind acceleration will be compared with the resonant Alfven wave heating function.

Guhathakurta, Madhulika↗

NASA NTRS1994

On the physics of waves in the solar atmosphere: Wave heating and wind acceleration

New calculations of the acoustic wave energy fluxes generated in the solar convective zone have been performed. The treatment of convective turbulence in the sun and solar-like stars, in particular, the precise nature of the turbulent power spectrum has been recognized as one of the most important issues in the wave generation problem. Several different functional forms for spatial and temporal spectra have been considered in the literature and differences between the energy fluxes obtained for different forms often exceed two orders of magnitude. The basic criterion for choosing the appropriate spectrum was the maximal efficiency of the wave generation. We have used a different approach based on physical and empirical arguments as well as on some results from numerical simulation of turbulent convection.

Musielak, Z. E.↗

NASA NTRS1989

Characteristic impedance of microstrip lines

The dyadic Green's function for a current embedded in a grounded dielectric slab is used to analyze microstrip lines at millimeter wave frequencies. The dyadic Green's function accounts accurately for fringing fields and dielectric cover over the microstrip line. Using Rumsey's reaction concept, an expression for the characteristic impedance is obtained. The numerical results are compared with other reported results.

Bailey, M. C.↗

NASA NTRS2014

Guided Wave Delamination Detection and Quantification With Wavefield Data Analysis

Unexpected damage can occur in aerospace composites due to impact events or material stress during off-nominal loading events. In particular, laminated composites are susceptible to delamination damage due to weak transverse tensile and inter-laminar shear strengths. Developments of reliable and quantitative techniques to detect delamination damage in laminated composites are imperative for safe and functional optimally-designed next-generation composite structures. In this paper, we investigate guided wave interactions with delamination damage and develop quantification algorithms by using wavefield data analysis. The trapped guided waves in the delamination region are observed from the wavefield data and further quantitatively interpreted by using different wavenumber analysis methods. The frequency-wavenumber representation of the wavefield shows that new wavenumbers are present and correlate to trapped waves in the damage region. These new wavenumbers are used to detect and quantify the delamination damage through the wavenumber analysis, which can show how the wavenumber changes as a function of wave propagation distance. The location and spatial duration of the new wavenumbers can be identified, providing a useful means not only for detecting the presence of delamination damage but also allowing for estimation of the delamination size. Our method has been applied to detect and quantify real delamination damage with complex geometry (grown using a quasi-static indentation technique). The detection and quantification results show the location, size, and shape of the delamination damage.

Tian, Zhenhua↗

NASA NTRS1996

Non-contact thickness measurement using UTG

A measurement structure for determining the thickness of a specimen without mechanical contact but instead employing ultrasonic waves including an ultrasonic transducer and an ultrasonic delay line connected to the transducer by a retainer or collar. The specimen, whose thickness is to be measured, is positioned below the delay line. On the upper surface of the specimen a medium such as a drop of water is disposed which functions to couple the ultrasonic waves from the delay line to the specimen. A receiver device, which may be an ultrasonic thickness gauge, receives reflected ultrasonic waves reflected from the upper and lower surface of the specimen and determines the thickness of the specimen based on the time spacing of the reflected waves.

Bui, Hoa T.↗

NASA NTRS1975

Acoustic wave propagation in a lined duct with non-uniform admittance

The problem of acoustic wave propagation in a lined duct with non-uniform liner admittance distribution has been analyzed. Two different methods of solution are discussed. Computations are made for a simple example of symmetrically lined two-dimensional duct containing a unit pressure source distribution. The non-uniform admittance variation is assumed to be a homogeneous random function along the direction of wave propagation. The influences of the spatial scale of the admittance variation, the magnitude of the variation and their dependence on mean liner admittance on sound attenuation are presented. The predicted trends agree qualitatively with existing experimental findings.

Yu, J. C.↗

NASA NTRS1988

An exact solution to the relativistic equation of motion of a charged particle driven by a linearly polarized electromagnetic wave

An exact analytic solution is found for a basic electromagnetic wave-charged particle interaction by solving the nonlinear equations of motion. The particle position, velocity, and corresponding time are found to be explicit functions of the total phase of the wave. Particle position and velocity are thus implicit functions of time. Applications include describing the motion of a free electron driven by an intense laser beam..

Shebalin, John V.↗

NASA NTRS2003

Simultaneous Ocean Wave Measurements by the JASON and TOPEX Satellites, With Buoy and Model Comparisons

The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. We here examine simultaneous significant wave height measurements by the Jason-1 and Topex/Poseidon altimeters. These data are also compared with in-situ measurements from deep-ocean buoys and with predicted wave heights from the WaveWatch 111 operational model. The rms difference between Jason and Topex wave heights is 28 cm, and this can be lowered by half through improved outlier editing and filtering of high-frequency noise. Noise is slightly larger in the Jason dataset, exceeding Topex by about 7 cm rms at frequencies above 0.05 Hz, which is the frequency at which the coherence between Topex and Jason measurements drops to zero. Jason wave heights are more prone to outliers, especially during periods of moderate to high backscatter. Buoy comparisons confirm previous reports that Topex wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5m; Jason heights in general are 3% smaller than Topex. Spurious dips in the Topex density function for 3- and 6-meter waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking.

Ray, R. D.↗

NASA NTRS1980

Concepts and techniques for ultrasonic evaluation of material mechanical properties

The ultrasonic nondestructive evaluation techniques discussed in the present paper indicate potentials for material characterization and property prediction. Stress wave interaction and material transfer function concepts are examined as a basis for explaining correlations between material mechanical behavior and ultrasonically measured quantities. It is observed that the effect and criticality of any discrete flaw, such as crack, inclusion, or any other stress raiser, is definable only in terms of its material microstructural environment. This underscores the importance of ultrasonic techniques capable of characterizing the stress wave energy transfer properties of a material.

Vary, A.↗

NASA NTRS2011

Receive Mode Analysis and Design of Microstrip Reflectarrays

Traditionally microstrip or printed reflectarrays are designed using the transmit mode technique. In this method, the size of each printed element is chosen so as to provide the required value of the reflection phase such that a collimated beam results along a given direction. The reflection phase of each printed element is approximated using an infinite array model. The infinite array model is an excellent engineering approximation for a large microstrip array since the size or orientation of elements exhibits a slow spatial variation. In this model, the reflection phase from a given printed element is approximated by that of an infinite array of elements of the same size and orientation when illuminated by a local plane wave. Thus the reflection phase is a function of the size (or orientation) of the element, the elevation and azimuth angles of incidence of a local plane wave, and polarization. Typically, one computes the reflection phase of the infinite array as a function of several parameters such as size/orientation, elevation and azimuth angles of incidence, and in some cases for vertical and horizontal polarization. The design requires the selection of the size/orientation of the printed element to realize the required phase by interpolating or curve fitting all the computed data. This is a substantially complicated problem, especially in applications requiring a computationally intensive commercial code to determine the reflection phase. In dual polarization applications requiring rectangular patches, one needs to determine the reflection phase as a function of five parameters (dimensions of the rectangular patch, elevation and azimuth angles of incidence, and polarization). This is an extremely complex problem. The new method employs the reciprocity principle and reaction concept, two well-known concepts in electromagnetics to derive the receive mode analysis and design techniques. In the "receive mode design" technique, the reflection phase is computed for a plane wave incident on the reflectarray from the direction of the beam peak. In antenna applications with a single collimated beam, this method is extremely simple since all printed elements see the same angles of incidence. Thus the number of parameters is reduced by two when compared to the transmit mode design. The reflection phase computation as a function of five parameters in the rectangular patch array discussed previously is reduced to a computational problem with three parameters in the receive mode. Furthermore, if the beam peak is in the broadside direction, the receive mode design is polarization independent and the reflection phase computation is a function of two parameters only. For a square patch array, it is a function of the size, one parameter only, thus making it extremely simple.

Rengarajan, Sembiam↗

NASA NTRS1970

Multipath errors in range rate measurement by a TDRS/VHF - GRARR

Range rate errors due to multipath reflection are calculated for a tracking and data relay satellite system using the VHF Goddard range and range rate (GRARR) system. At VHF the reflection is primarily specular, and the strength of the multipath relative to the direct path can be modeled in terms of the geometry and the surface characteristics, specifically the root-mean-square (rms) ocean wave height. The uplink and downlink multipath introduces phase jitter on the GRARR carrier and subcarrier. The derivation of these effects is reviewed leading to an expression for the rms range rate error. The derivation assumed the worst-case orbital configurations in which there was very little relative specular Doppler. This means that the specular multipath interference was not attenuated by the carrier and subcarrier PLL transfer functions. Curves of range rate error are presented as a function of grazing angle with wave height 0.3 to 0.7 meters and spacecraft altitude 100 to 700 miles as parameters.

Sohn, S. J.↗

NASA NTRS1973

A search for global and seasonal variation of methane from Nimbus 4 IRIS measurements

The Nimbus 4 infrared interferometer spectrometer (IRIS) measurements in the region around wave number 1304 show absorption due to methane in the earth's atmosphere. From the laboratory measurements of the absorption coefficient and a selected vertical distribution corresponding to 1.13 atm cm of methane, a theoretical model for the transmittance at wave number 1304 is developed. The weighting function deduced from this model shows a maximum around 300 mb. Some weak absorption due to nitrous oxide in the atmosphere has been taken into account. The vertical temperature profile, derived from the 15 micron CO2 band in the IRIS spectrum, together with the methane weighting function have been used in a consistent way to compute the upwelling intensity at wave number 1304. The brightness temperature corresponding to the IRIS observed radiance at wave number 1304 has been compared with the brightness temperature deduced from the calculated upwelling intensity from 80 deg North to 80 deg South and for different periods of the year. This comparison shows that the two brightness temperatures agree with one another to within the accuracy of measurements about 2 K. From this result it was found that global or seasonal variability of methane is less than + or - 0.25 atm cm.

Prabhakara, C.↗

NASA NTRS1989

Excitation of low-frequency waves by auroral electron beams

The electron distribution functions measured by the Dynamics Explorer 1 satellite during an auroral pass in 1981 are used in a linear instability analysis of low-frequency electromagnetic and electrostatic waves near and below the hydrogen gyrofrequency. It is suggested that the low-frequency electric and magnetic noise in the auroral zone might be explained by O and H electromagnetic ion cyclotron waves excited by energetic electron beams. An instability analysis suggests that upward and downward streaming electrons throughout the central plasma sheet region provide the free energy for heating oxygen ion through oxygen electrostatic ion cyclotron waves.

Lin, C. S.↗

NASA NTRS1989

Solitary waves in mantle plumes

Numerical calculations in two dimensions show that solitary wave disturbances can propagate along thermal plumes in a homogeneous, viscous fluid with a thermally activated rheology similar to the mantle. Comparison of the numerical results with analytic results from an idealized two-fluid model indicates that the two-fluid model can be applied to solitary waves in the thermally activated plume. A two-fluid model of solitary waves on cylindrical conduits is accordingly applied to mantle plumes to estimate the propagation speeds, time durations, and pulse lengths of solitary waves in mantle plumes as a function of background mantle viscosity, plume flux, plume density deficit, plume viscosity, and the volume of material transported by the solitary wave. It is inferred that mantle plumes may be eposodic via solitary waves and that these disturbances might account for observed 0(10 m.y.) variations in the durations and spacings of episodes of enhanced hotspot volcanic activity. Solitary waves in mantle plumes could be generated by interactions among plumes and between plumes and the large-scale, time-dependent mantle circulation.

Schubert, G.↗

NASA NTRS2003

Shock Formation and Energy Dissipation of Slow Magnetosonic Waves in Coronal Plumes

We study the shock formation and energy dissipation of slow magnetosonic waves in coronal plumes. The wave parameters and the spreading function of the plumes as well as the base magnetic field strength are given by empirical constraints mostly from SOHO/UVCS. Our models show that shock formation occurs at low coronal heights, i.e., within 1.3 bun, depending on the model parameters. In addition, following analytical estimates, we show that scale height of energy dissipation by the shocks ranges between 0.15 and 0.45 Rsun. This implies that shock heating by slow magnetosonic waves is relevant at most heights, even though this type of waves is apparently not a solely operating energy supply mechanism.

Cuntz, M.↗

NASA NTRS2017

Feature Detection and Curve Fitting Using Fast Walsh Transforms for Shock Tracking: Applications

Walsh functions form an orthonormal basis set consisting of square waves. Square waves make the system well suited for detecting and representing functions with discontinuities. Given a uniform distribution of 2p cells on a one-dimensional element, it has been proven that the inner product of the Walsh Root function for group p with every polynomial of degree < or = (p - 1) across the element is identically zero. It has also been proven that the magnitude and location of a discontinuous jump, as represented by a Heaviside function, are explicitly identified by its Fast Walsh Transform (FWT) coefficients. These two proofs enable an algorithm that quickly provides a Weighted Least Squares fit to distributions across the element that include a discontinuity. The detection of a discontinuity enables analytic relations to locally describe its evolution and provide increased accuracy. Time accurate examples are provided for advection, Burgers equation, and Riemann problems (diaphragm burst) in closed tubes and de Laval nozzles. New algorithms to detect up to two C0 and/or C1 discontinuities within a single element are developed for application to the Riemann problem, in which a contact discontinuity and shock wave form after the diaphragm bursts.

Gnoffo, Peter A.↗

NASA NTRS1990

Generation of low-frequency waves at Comet Halley

The extent to which the properties of the waves observed at comet Halley during the Giotto encounter can be understood within the context of linearized Vlasov theory is investigated. In the region that is magnetically connected to the comet, fluctuations in the plasma frame of reference are detected near 4 and 10 mHz, close to the water cyclotron frequency, as well as at 20-60 mHz, which is well above the water cyclotron frequency. Using a variety of approximations for the ion distribution function, it is shown that waves having properties similar to those observed can then be generated with appropriate choices of plasma parameters. In the region that is magnetically disconnected from the comet, distinct peaks are observed in the magnetic power spectrum at 7, 21, 29, and 35 mHz, with a hint of a peak at 14 mHz.

Goldstein, M. L.↗

NASA NTRS1982

Growth rate calculations of auroral kilometric radiation using the relativistic resonance condition

The relativistic cyclotron resonance condition for right-handed extraordinary mode waves defines an ellipse in velocity space. The position of the center and size of the semiminor axis of this ellipse are functions of the plasma frequency, gyrofrequency, wave frequency, and wave normal angle. The effect of varying these parameters on the position and size of the resonance contour is analyzed. The results show that as the wave normal angle decreases, the semiminor axis increases in size and as the plasma frequency to gyrofrequency ratio decreases, the minimum energy for resonating electrons decreases and the maximum wave normal angle allowed by the resonance condition increases. Also, as the wave frequency to gyrofrequency ratio increases, the center of the resonance ellipse moves away from the origin. The relativistic resonance condition and the electron distribution in velocity space obtained by the S3-3 satellite are used to calculate numerically growth rates for the terrestrial auroral kilometric radiation. It is shown that the loss cone region of the electron distribution can give rise to growth rates for the extraordinary mode that are sufficiently large to account for the observed radio emission intensities.

Omidi, N.↗