Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Promising Technology for Reprocessing Complex Uranium Ores from the Elkon Deposit

The results of research on reprocessing of complex uranium ores from the Elkon deposit with recovery of uranium, gold, silver, and vanadium by methods of radiometric sorting, combining of autoclave and atmospheric leaching of ore followed by sorption and extraction recovery of valuable components, are presented. The capacity was 90 mg/g in sorption of uranium on strongly basic anionite and the uranium concentration ≤0.003 g/dm{sup 3} in sorption filtrates. The choice of eluent is determined by the formulation of the problem of obtaining the finished uranium product of the requisite form and quality. A fundamentally new composition of the extracting agent is proposed for direct extraction of uranium from nitrate-containing solutions. An iron-vanadium concentrate with vanadium and iron content 2.58 and 22.8%, respectively, suitable for subsequent reprocessing, was obtained. The anionite PuroGold S-992 is recommended for recovery of gold and silver. The gold and silver concentrations in the commercial desorbate were 270 and 380 mg/dm{sup 3}, respectively; a gold-containing concentrate was obtained.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Gas-Phase Synthesis of Singly and Multiply Charged Polyoxovanadate Anions Employing Electrospray Ionization and Collision Induced Dissociation

Electrospray ionization mass spectrometry (ESI-MS) combined with in-source fragmentation and tandem mass spectrometry (MS/MS) experiments were used to generate a wide range of singly and multiply charged vanadium oxide cluster anions including V x O y n– and V x O y Cl n– ions (x = 1–14, y = 2–36, n = 1–3), protonated clusters, and ligand-bound polyoxovanadate anions. The cluster anions were produced by electrospraying a solution of tetradecavanadate, V 14 O 36 Cl(L) 5 (L = Et 4 N + , tetraethylammonium), in acetonitrile. Under mild source conditions, ESI-MS generates a distribution of doubly and triply charged V x O y Cl n– and V x O y Cl(L) (n–1)– clusters predominantly containing 14 vanadium atoms as well as their protonated analogs. Accurate mass measurement using a high-resolution LTQ/Orbitrap mass spectrometer (m/Δm = 60,000 at m/z 410) enabled unambiguous assignment of the elemental composition of the majority of peaks in the ESI-MS spectrum. In addition, high-sensitivity mass spectrometry allowed the charge state of the cluster ions to be assigned based on the separation of the major from the much less abundant minor isotope of vanadium. In-source fragmentation resulted in facile formation of smaller V x O y Cl (1–2)– and V x O y (1–2)– anions. Collision-induced dissociation (CID) experiments enabled systematic study of the gas-phase fragmentation pathways of the cluster anions originating from solution and from in-source CID. Surprisingly simple fragmentation patterns were obtained for all singly and doubly charged V x O y Cl and V x O y species generated through multiple MS/MS experiments. In contrast, cluster anions originating directly from solution produced comparatively complex CID spectra. These results are consistent with the formation of more stable structures of V x O y Cl and V x O y anions through low-energy CID. Finally and furthermore, our results demonstrate that solution-phase synthesis of one precursor cluster anion combined with gas-phase CID is an efficient approach for the top-down synthesis of a wide range of singly and multiply charged gas-phase metal oxide cluster anions for subsequent investigations of structure and reactivity using mass spectrometry and ion spectroscopy techniques.

collision-induced dissociation↗

Influence of heteroanion and ammonium cation size on the composition and gas-phase fragmentation of polyoxovanadates

This paper describes the results of a systematic experimental investigation of the influence of different size cationic ammonium ligands and heteroanions on the composition, ionic charge state and gas-phase fragmentation pathways of anionic polyoxovanadates synthesized in solution. Four separate solutions of olyoxometalates (POMs) were prepared using all possible combinations of the tetraethylammonium [(C2H5)4N+] ligand, chloride (Cl-) heteroanion, tetrabutylammonium [(C4H9)4N+] ligand and acetate (CH3CO2-) heteroanion. Employing electrospray ionization combined with high-resolution mass spectrometry (ESI-MS) we demonstrate that POM solutions synthesized using the small [(C2H5)4N+] ligand and Cl-heteroanion are composed predominately of large doubly and triply charged chlorine containing clusters with a size distribution centered at fourteen vanadium atoms. POM solutions prepared using the Cl- anion and [(C4H9)4N+] ligand are shown to contain slightly larger clusters with fifteen and sixteen vanadium atoms, thereby indicating that the size of the cationic ammonium ligand exerts only a weak influence on the polymerization of polyoxovanadates. POM solutions prepared using (C2H5)4NCl and (C4H9)4NCl also produced peaks consistent with the attachment of one and two ammonium cations to the larger clusters. Solutions prepared using the large CH3CO2 - heteroanion, in contrast, are demonstrated to contain much smaller singly and doubly *Manuscript Click here to view linked References 2 charged clusters with a size distribution centered at six vanadium atoms. In addition, while incorporation of one and two ammonium ligands into the smaller clusters was observed, no POMs containing the CH3CO2 - heteroanion were identified. The gas-phase fragmentation pathways of representative POMs containing one and two ammonium ligands were examined using collision induced dissociation (CID) and mass spectrometry. Similar primary fragmentation pathways involving partial loss of a ligand -[(CxHy)3N+ x = 2,4; y = 5,9] were observed for clusters containing both one and two ligands largely independent of the size, composition and charge state of the precursor ion. The [(C4H9)4N+] ligand was found to exhibit stronger interactions with the core of the POMs resulting in higher abundances of fragment ions containing (C4H9) units compared to (C2H5) units from [(C2H5)4N+]. These results provide fundamental insight into the interactions between anionic metal oxide clusters, heteroanions and cationic ammonium ligands that are responsible for the size and composition controlled synthesis of POMs in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Keggin (K{sub 5}, H{sub 3}O)[SiV{sub 3}W{sub 9}O{sub 40}H]·xH{sub 2}O: Characterization and crystal structure

Single crystals of the potassium salt (K{sub 5}, H{sub 3}O)[SiV{sub 3}W{sub 9}O{sub 40}H]·xH{sub 2}O of the vanadium tri-substituted α-Keggin dodecatungstosilicate were prepared and analyzed by vibrational, EPR and {sup 51}V NMR spectroscopy. Varying the synthesis conditions allows crystallization of partially reduced anions. The crystal structure was determined for both oxidized (V{sup 5+}) and partially reduced (V{sup 4+/5+}) potassium salts. Single crystal X-ray diffraction data and solid state {sup 51}V-NMR spectra confirm the occurrence of a single vanadium site in a cubic structure due to rotational disorder of the Keggin ion. Partially reduced compounds crystallize within the same structure as fully oxidized ones. EPR experiments confirm strong interaction of V{sup 4+} with two V{sup 5+} ions, in accordance with insertion of a V{sub 3} subunit into the lacunary Keggin ion as designed in the synthesis method. The 3D-edifice is composed of K{sup +}/H{sub 2}O counter-sublattice with evidence of tunable water occupancy. - Graphical abstract: Relative arrangements of HPA clusters in (K{sub 5}, H{sub 3}O)[SiV{sub 3}W{sub 9}O{sub 40}]·xH{sub 2}O. - Highlights: • We prepared single crystals of the potassium salt (K{sub 5}, H{sub 3}O)[SiV{sub 3}W{sub 9}O{sub 40}H]·xH{sub 2}O. • The synthesis was designed to give the α-1,2,3-[SiV{sub 3}W{sub 9}O{sub 40}] Keggin ion. • Strict pH control was necessary to avoid vanadium partial reduction. • Reduced compounds crystallize within the same structure as fully oxidized ones. • EPR confirms strong interaction of V{sup 4+} with two V{sup 5+} ions in a V{sub 3} subunit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tribological properties of self-lubricating NiAl/Mo-based composites containing AgVO{sub 3} nanowires

Silver vanadate (AgVO{sub 3}) nanowires were synthesized by hydrothermal method and self-lubricating NiAl/Mo-AgVO{sub 3} composites were fabricated by powder metallurgy technique. The composition and microstructure of NiAl/Mo-based composites were characterized and the tribological properties were investigated from room temperature to 900 °C. The results showed that NiAl/Mo-based composites were consisted of nanocrystalline B2 ordered NiAl matrix, Al{sub 2}O{sub 3}, Mo{sub 2}C, metallic Ag and vanadium oxide phase. The appearance of metallic Ag and vanadium oxide phase can be attributed to the decomposition of AgVO{sub 3} during sintering. Wear testing results confirmed that NiAl/Mo-based composites have excellent tribological properties over a wide temperature range. For example, the friction coefficient and wear rate of NiAl/Mo-based composites containing AgVO{sub 3} were significantly lower than the composites containing only metallic Mo or AgVO{sub 3} lubricant when the temperature is above 300 °C, which can be attributed to the synergistic lubricating action of metallic Mo and AgVO{sub 3} lubricants. Furthermore, Raman results indicated that the composition on the worn surface of NiAl-based composites was self-adjusted after wear testing at different temperatures. For example, Ag{sub 3}VO{sub 4} and Fe{sub 3}O{sub 4} lubricants were responsible for the improvement of tribological properties at 500 °C, AgVO{sub 3}, Ag{sub 3}VO{sub 4} and molybdate for 700 °C, and AgVO{sub 3} and molybdate for 900 °C of NiAl-based composites with the addition of metallic Mo and AgVO{sub 3}. - Highlights: • NiAl/Mo-AgVO{sub 3} nanocomposites were prepared by mechanical alloying and sintering. • AgVO{sub 3} decomposed to metallic Ag and vanadium oxide during the sintering process. • NiAl/Mo-AgVO{sub 3} exhibited superior tribological properties at a board temperature range. • Phase composition on the worn surface was varied with temperatures. • Self-adjusted action was responsible for the improvement of tribological properties.

36 MATERIALS SCIENCE↗

Template-free cyclic hexavanadate: Synthesis, characterization, solid-state structure, and solution-state dynamics

A novel hexavanadate–organic hybrid material of the formula [NH 4 ] 2 [V 6 (µ 2 -O) 6 (O) 4 (PDC) 6 ] (PDC = 2,6-pyridinedicarboxylate) has been prepared in dilute nitric acid under hydrothermal reaction conditions. The product was characterized by single crystal and powder X-ray diffraction, FTIR, UV–Vis, Raman, and thermogravimetric analyses in the solid state, and small angle X-ray scattering, ESI-MS, NMR ( 1 H, 13 C, 51 V), and Raman spectroscopic techniques in aqueous solution. The crystal structure revealed a rare structure type in vanadium chemistry which crystallizes in the monoclinic space group P2 1/n and consists of a cyclic polyoxovanadate core with edge-capped tetrahedral and octahedral vanadium centers. The “hollow” polyoxovanadate is stabilized by a PDC ligand on each metal center, and ammonium ions charge balance the anionic core and form hydrogen bonding interactions with the hexavanadate units. Solution-state studies showed that the structural unit observed in the solid state hydrolyzes upon dissolution in water, resulting in a symmetric dimer bearing similar ligand sets. Finally, catalytic experiments on the photodecomposition of crystal violet, rhodamine B, methylene blue, and rhodamine 6G showed ≥93% degradation of the dyes under UV light irradiation upon addition of the vanadium complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Differential pulmonary and cardiac effects of pulmonary exposure to a panel of particulate matter-associated metals

Biological mechanisms underlying the association between particulate matter (PM) exposure and increased cardiovascular health effects are under investigation. Water-soluble metals reaching systemic circulation following pulmonary exposure are likely exerting a direct effect. However, it is unclear whether specific PM-associated metals may be driving this. We hypothesized that exposure to equimolar amounts of five individual PM-associated metals would cause differential pulmonary and cardiac effects. We exposed male WKY rats (14 weeks old) via a single intratracheal instillation (IT) to saline or 1 mumol/kg body weight of zinc, nickel, vanadium, copper, or iron in sulfate form. Responses were analyzed 4, 24, 48, or 96 h after exposure. Pulmonary effects were assessed by bronchoalveolar lavage fluid levels of total cells, macrophages, neutrophils, protein, albumin, and activities of lactate dehydrogenase, gamma-glutamyl transferase, and n-acetyl glucosaminidase. Copper induced earlier pulmonary injury/inflammation, while zinc and nickel produced later effects. Vanadium or iron exposure induced minimal pulmonary injury/inflammation. Zinc, nickel, or copper increased serum cholesterol, red blood cells, and white blood cells at different time points. IT of nickel and copper increased expression of metallothionein-1 (MT-1) in the lung. Zinc, nickel, vanadium, and iron increased hepatic MT-1 expression. No significant changes in zinc transporter-1 (ZnT-1) expression were noted in the lung or liver; however, zinc increased cardiac ZnT-1 at 24 h, indicating a possible zinc-specific cardiac effect. Nickel exposure induced an increase in cardiac ferritin 96 h after IT. This data set demonstrating metal-specific cardiotoxicity is important in linking metal-enriched anthropogenic PM sources with adverse health effects.

60 APPLIED LIFE SCIENCES↗

Potential impact of seawater uranium extraction on marine life

A variety of adsorbent materials have been developed to extract uranium from seawater as an alternative traditional terrestrial mining. A large-scale deployment of these adsorbents would be necessary to recover useful quantities of uranium and this raises a number of concerns regarding potential impacts on the surrounding marine environment. Two concerns are whether or not the adsorbent materials are toxic and any potentially harmful effects that may result from depleting uranium or vanadium (also highly concentrated by the adsorbents) from the local environment. To test the potential toxicity of the adsorbent with or without bound metals, Microtox assays were used to test both direct contact toxicity and the toxicity of any leachate in the seawater. The Microtox assay was chosen because it the detection of non-specific mechanisms of toxicity. Toxicity was not observed with leachates from any of 68 adsorbent materials that were tested, but direct contact with some adsorbents at very high adsorbent con-centrations exhibited toxicity. These concentrations are, however, very unlikely to be seen in the actual marine deployment. Adsor-bents that accumulated uranium and trace metals were also tested for toxicity, and no toxic effect was observed. Biofouling on the adsorbents and in columns or flumes containing the adsorbents also indicates that the adsorbents are not toxic and that there may not be an obvious deleterious effect resulting from removing uranium and vanadium from seawater. An extensive literature search was also performed to examine the potential impact of uranium and vanadium extraction from seawater on marine life using the Pacific Northwest National Laboratory’s (PNNL’s) document analysis tool, IN-SPIRE™. Although other potential environmental effects must also be considered, results from both the Microtox assay and the literature search provide preliminary evidence that uranium extraction from seawater could be performed with minimal impact on marine fauna.

environment↗

An X-ray Absorption Spectroscopy Study of the Cathodic Discharge of Ag2VO2PO4: Geometric and Electronic Structure Characterization of Intermediate Phases and Mechanistic Insights

Bimetallic phosphorus oxides have emerged as attractive candidates for use as cathode materials in the next generation of lithium-based batteries owing to the operation of multielectron transfer processes and thermochemical stabilities conferred by the incorporation of phosphate groups. In particular silver vanadium phosphorus oxide, Ag{sub 2}VO{sub 2}PO{sub 4}, shows a much desired in situ conductivity enhancement upon discharge resulting in inherently high power capability with minimal conductive additives needed. However, the amorphization of Ag{sub 2}VO{sub 2}PO{sub 4} during electrochemical discharge precludes the use of standard diffraction tools to monitor changes in the local electronic and geometric structure. Here, we have utilized a combination of V K-, V L-, Ag K-, and O K-edge X-ray absorption fine structure spectroscopy to determine the local vanadium and silver oxidation states, local coordination geometry, and stoichiometry for Ag{sub 2}VO{sub 2}PO{sub 4} samples with varying extents of electrochemical lithiation. Soft X-ray V L- and O K-edge measurements provide a detailed orbital-specific picture of changes in vanadium electronic structure upon discharge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flake like V{sub 2}O{sub 5} nanoparticles for ethanol sensing at room temperature

The versatile redox property of vanadium oxide explores it in various applications like catalysis, electrochromism, electrochemistry, energy storage, sensors, microelectronics, batteries etc., In this present work, vanadium oxide was prepared via hydrothermal route followed by calcination. The structural and lattice parameters were analysed from the powder X-ray diffraction (XRD) pattern. The morphology and the composition of the sample were obtained from Field emission Scanning electron microscopic (FeSEM) and Energy Dispersive X-ray (EDAX) Spectrometric analysis respectively. The sensitivity, response – recovery time of the sample towards ethanol (0 ppm – 300 ppm) sensing at room temperature was measured and the present investigation on vanadium oxide nanoparticles over the flakes shows better sensitivity (30%) at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Uniform second Li ion intercalation in solid state ϵ-LiVOPO4

Full, reversible intercalation of two Li + has not yet been achieved in promising VOPO 4 electrodes. A pronounced Li + gradient has been reported in the low voltage window (i.e., second lithium reaction) that is thought to originate from disrupted kinetics in the high voltage regime (i.e., first lithium reaction). Here, we employ a combination of hard and soft x–ray photoelectron and absorption spectroscopy techniques to depth profile solid state synthesized LiVOPO 4 cycled within the low voltage window only. Analysis of the vanadium environment revealed no evidence of a Li + gradient, which combined with almost full theoretical capacity confirms that disrupted kinetics in the high voltage window are responsible for hindering full two lithium insertion. Furthermore, we argue that the uniform Li + intercalation is a prerequisite for the formation of intermediate phases Li1.50VOPO 4 and Li 1.75 VOPO 4 . The evolution from LiVOPO 4 to Li 2 VOPO 4 via the intermediate phases is confirmed by direct comparison between O K–edge absorption spectroscopy and density functional theory.

25 ENERGY STORAGE↗

A metal-insulator transition study of VO 2 thin films grown on sapphire substrates

In this paper, vanadium thin films were deposited on sapphire substrates by DC magnetron sputtering and then oxidized in a tube furnace filled with oxygen under different temperatures and oxygen flow rates. The significant influence of the oxygen flow rate and oxidation temperature on the electrical and structural properties of the vanadium oxide thin films were investigated systematically. It shows the pure vanadium dioxide (VO 2 ) state can only be obtained in a very narrow temperature and oxygen flow rate range. The resistivity change during the metal-insulator transition varies from 0.2 to 4 orders of magnitude depending on the oxidation condition. Large thermal hysteresis during the metal-insulator phase transition was observed during the transition compared to the results in literature. Proper oxidation conditions can significantly reduce the thermal hysteresis. Finally, the fabricated VO 2 thin films showed the potential to be applied in the development of electrical sensors and other smart devices.

36 MATERIALS SCIENCE↗

THE SPECTRUM AND TERM ANALYSIS OF V I

High-resolution spectra of neutral vanadium have been recorded by Fourier transform spectrometry in the region 1492-28600 A (67020-3496 cm{sup -1}) with vanadium-neon and vanadium-argon hollow cathode lamps as sources. Most of the lines exhibit fully or partly resolved hyperfine structure, but the wavenumber uncertainty for the center of gravity of the strongest lines is 0.002 cm{sup -1}. Of the previously published energy levels of V I, 72 have been revised and 37 discarded. In addition, 89 new levels have been found. In total 346 odd levels and 198 even levels are presented. Wavenumbers and classifications are given for 3130 V I lines.

74 ATOMIC AND MOLECULAR PHYSICS↗

THE SPECTRUM AND TERM ANALYSIS OF V II

The spectrum and extended term analysis of V II are presented. Fourier transform spectrometry was used to record high resolution spectra of singly ionized vanadium in the region 1492-5800 A (67020-17260 cm{sup -1}) with vanadium-neon and vanadium-argon hollow cathode lamps as sources. The wavenumber uncertainty for the center of gravity of the strongest lines is typically 0.002 cm{sup -1}, an improvement of an order of magnitude over previous measurements. Most of the lines exhibit partly resolved hyperfine structure. The V II energy levels in the 1985 compilation of Sugar and Corliss have been confirmed and revised, with the exception of the high-lying 4f levels and eight of the lower levels. Thirty-nine of the additional eighty-five high levels published by Iglesias et al. have also been confirmed and revised, and three of their missing levels have been found. The energy uncertainty of the revised levels has been reduced by about an order of magnitude. In total, 176 even levels and 233 odd levels are presented. Wavenumbers and classifications are given for 1242 V II lines.

74 ATOMIC AND MOLECULAR PHYSICS↗

Atomic and itinerant effects at the transition-metal x-ray adsorption K pre-edge exemplified in the case of V{sub 2}O{sub 3}.

X-ray absorption spectroscopy is a well-established tool for obtaining information about orbital and spin degrees of freedom in transition-metal and rare-earth compounds. For this purpose usually the dipole transitions of the L (2p to 3d) and M (3d to 4f) edges are employed, whereas higher order transitions such as quadrupolar 1s to 3d in the K edge are rarely studied in that respect. This is due to the fact that usually such quadrupolar transitions are overshadowed by dipole-allowed 1s to 4p transitions and, hence, are visible only as minor features in the pre-edge region. Nonetheless, these features carry a lot of valuable information, similar to the dipole L-edge transition, which is not accessible in experiments under pressure due to the absorption of the diamond anvil pressure cell. We recently performed a theoretical and experimental analysis of such a situation for the metal-insulator transition of (V{sub (1-x)}Cr{sub x}){sub 2}O{sub 3}. Since the importance of the orbital degrees of freedom in this transition is widely accepted, a thorough understanding of quadrupole transitions of the vanadium K pre-edge provides crucial information about the underlying physics. Moreover, the lack of inversion symmetry at the vanadium site leads to on-site mixing of vanadium 3d and 4p states and related quantum mechanical interferences between dipole and quadrupole transitions. Here we present a theoretical analysis of experimental high-resolution x-ray absorption spectroscopy at the V K pre-edge measured in partial fluorescence yield mode for single crystals. We carried out density functional as well as configuration interaction calculations in order to capture effects coming from both itinerant and atomic limits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetics of the Variation in the Magnetic Impurity Ion Concentration in Pb{sub 1–x–y}Sn{sub x}V{sub y}Te Alloys upon Doping

The field and temperature dependences of the magnetization (magnetic fields B ≤ 7.5 T, temperatures T = 2.0–75 K) of samples from a Pb{sub 1–x–y}Sn{sub x}V{sub y}Te (x = 0.08, y = 0.01) single-crystal ingot synthesized by the Bridgman–Stockbarger method. It is established that the sample magnetization contains two main contributions, notably, the paramagnetism of vanadium ions and diamagnetism of the crystal lattice. The field and temperature dependences of the magnetization are approximated by the sum of modified Brillouin functions corresponding to the paramagnetic contributions of vanadium in two different charge states and the diamagnetic contribution linear in terms of field. The concentrations of vanadium ions in two different magnetic states and the character of their variation along the ingot are determined within the scope of the alloy’s electronic-structure rearrangement because of doping. The results are compared with the data of X-ray fluorescence microanalysis and the results of studying the galvanomagnetic properties of the samples.

36 MATERIALS SCIENCE↗

Variability of the resulting microdeformation field in the Zn{sub 1–x}V{sub x}Se crystals (0.01 ≤ x ≤ 0.10)

A detailed neutronographic study of the bulk ZnSe crystals doped with vanadium up to the content commensurate with the solubility limit in a semiconductor matrix has been carried out for the first time at room temperature. The data that characterize nonuniformly-deformed states based on the cubic structural modification of the II–VI compounds are obtained. A simplified analysis of the broadening patterns of the diffraction profiles of main Bragg reflexes of the studied crystals shows that the resulting deformation covers macroscopic volumes, and the distribution of vanadium ions in the given cases may significantly deviate from the uniform distribution over volume. Relative to the initial cubic lattice, dominating trends towards symmetry changes preceding the phase stratification in the ZnSe crystals heavily doped with vanadium are revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emerging technologies and approaches to minimize discharges into Lake Michigan Phase 2, Module 3 report.

Purdue University Calumet (Purdue) and Argonne National Laboratory (Argonne) have conducted an independent study to identify deployable technologies that could help the BP Whiting Refinery, and other petroleum refineries, meet future wastewater discharge limits. This study has been funded by BP. Each organization tested a subset of the target technologies and retains sole responsibility for its respective test design and implementation, quality assurance and control, test results obtained from each of the technologies, and corresponding conclusions and recommendations. This project was divided in two phases and modules. This report summarizes the work conducted by Argonne in Phase II Module 3 (Bench Scale Testing). Other Modules are discussed elsewhere (Emerging Technologies and Approaches to Minimize Discharges into Lake Michigan, Phase 2, Modules 1-3 Report, April 2011, prepared for BP Americas by the Argonne - Purdue Task Force). The goal of this project was to identify and assess available and emerging wastewater treatment technologies for removing mercury and vanadium from the Whiting Refinery wastewater and to conduct bench-scale tests to provide comparable, transparent, and uniform results across the broad range of technologies tested. After the bench-scale testing phase, a previously developed decision matrix was refined and applied by Argonne to process and review test data to estimate and compare the preliminary performance, engineering configuration, preliminary cost, energy usage, and waste generation of technologies that were shown to be able to remove Hg and/or V to below the target limit at the bench scale. The data were used as the basis to identify the best candidates for further testing at the bench or pilot scale on a slip stream of effluent to lake (ETL) or clarifier effluent (CE) at the Whiting Refinery to determine whether future limits could be met and to generate other pertinent data for scale-up and sustainability evaluation. As a result of this technology assessment, Argonne identified several technologies that, at the bench-scale, could achieve the targeted performance for the removal of mercury and vanadium. A subset of those technologies were recommended for further testing either at the bench scale or at the pilot scale to determine whether future discharge limits could be met at the pilot-scale. The objectives of this project module are to: (1) Test at the bench-scale a subset of the technologies previously identified in Module 1 for the removal of target heavy metals down to 1.3 ppt Hg and 280 ppb V; (2) Review and process bench-scale test results on the basis of the end-point performance measures matrix to determine preliminary comparative performance, cost-effectiveness, and potential engineering configuration of tested technologies; (3) Assess the technological feasibility and readiness of the identified technologies for implementation at the Whiting Refinery; and (4) Select technically and economically feasible mercury- and vanadium-removal technologies and vendors to be recommended for pilot-scale testing at the Whiting Refinery.

02 PETROLEUM↗