Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “trend analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Trends in stratospheric temperature

Stratospheric temperatures for long-term and recent trends and the determination of whether observed changes in upper stratospheric temperatures are consistent with observed ozone changes are discussed. The long-term temperature trends were determined up to 30mb from radiosonde analysis (since 1970) and rocketsondes (since 1969 and 1973) up to the lower mesosphere, principally in the Northern Hemisphere. The more recent trends (since 1979) incorporate satellite observations. The mechanisms that can produce recent temperature trends in the stratosphere are discussed. The following general effects are discussed: changes in ozone, changes in other radiatively active trace gases, changes in aerosols, changes in solar flux, and dynamical changes. Computations were made to estimate the temperature changes associated with the upper stratospheric ozone changes reported by the Solar Backscatter Ultraviolet (SBUV) instrument aboard Nimbus-7 and the Stratospheric Aerosol and Gas Experiment (SAGE) instruments.

Schoeberl, M. R.↗

The effects of digital elevation model resolution on the calculation and predictions of topographic wetness indices.

One of the largest exports in the Southeast U.S. is forest products. Interest in biofuels using forest biomass has increased recently, leading to more research into better forest management BMPs. The USDA Forest Service, along with the Oak Ridge National Laboratory, University of Georgia and Oregon State University are researching the impacts of intensive forest management for biofuels on water quality and quantity at the Savannah River Site in South Carolina. Surface runoff of saturated areas, transporting excess nutrients and contaminants, is a potential water quality issue under investigation. Detailed maps of variable source areas and soil characteristics would therefore be helpful prior to treatment. The availability of remotely sensed and computed digital elevation models (DEMs) and spatial analysis tools make it easy to calculate terrain attributes. These terrain attributes can be used in models to predict saturated areas or other attributes in the landscape. With laser altimetry, an area can be flown to produce very high resolution data, and the resulting data can be resampled into any resolution of DEM desired. Additionally, there exist many maps that are in various resolutions of DEM, such as those acquired from the U.S. Geological Survey. Problems arise when using maps derived from different resolution DEMs. For example, saturated areas can be under or overestimated depending on the resolution used. The purpose of this study was to examine the effects of DEM resolution on the calculation of topographic wetness indices used to predict variable source areas of saturation, and to find the best resolutions to produce prediction maps of soil attributes like nitrogen, carbon, bulk density and soil texture for low-relief, humid-temperate forested hillslopes. Topographic wetness indices were calculated based on the derived terrain attributes, slope and specific catchment area, from five different DEM resolutions. The DEMs were resampled from LiDAR, which is a laser altimetry remote sensing method, obtained from the USDA Forest Service at Savannah River Site. The specific DEM resolutions were chosen because they are common grid cell sizes (10m, 30m, and 50m) used in mapping for management applications and in research. The finer resolutions (2m and 5m) were chosen for the purpose of determining how finer resolutions performed compared with coarser resolutions at predicting wetness and related soil attributes. The wetness indices were compared across DEMs and with each other in terms of quantile and distribution differences, then in terms of how well they each correlated with measured soil attributes. Spatial and non-spatial analyses were performed, and predictions using regression and geostatistics were examined for efficacy relative to each DEM resolution. Trends in the raw data and analysis results were also revealed.

09 BIOMASS FUELS↗

Measuring the Energy Consumption and Efficiency of Deep Neural Networks: An Empirical Analysis and Design Recommendations

Addressing the "Red-AI" trend of rising energy consumption by large-scale neural networks, this study investigates the measured energy consumption of training various fully connected neural network architectures. We introduce the BUTTER-E dataset, an augmentation to the BUTTER Empirical Deep Learning dataset, containing energy consumption and performance data from 41,129 individual experimental runs spanning 30,582 distinct configurations: 13 datasets, 20 sizes (trainable parameters), 8 "shapes", and 14 depths on both CPUs and GPUs using node-level watt-meters. This dataset reveals the complex relationship between dataset size, network structure, and energy use. Our analysis uncovers a surprising, hardware-mediated non-linear relationship between energy efficiency and network design, challenging the assumption that reducing the number of parameters or FLOPs is the best way to achieve greater energy efficiency. We propose a straightforward and effective energy model that accounts for network size, computing, and memory hierarchy. Highlighting the need for cache-considerate algorithm development, we suggest a codesign approach to energy efficient network, algorithm, and hardware design. This work contributes to the fields of sustainable computing and Green AI, offering practical guidance for creating more energy-efficient neural networks and promoting sustainable AI.

97 MATHEMATICS AND COMPUTING↗

Grain boundary plane orientation fundamental zones and structure-property relationships

Grain boundary plane orientation is a profoundly important determinant of character in polycrystalline materials that is not well understood. This work demonstrates how boundary plane orientation fundamental zones, which capture the natural crystallographic symmetries of a grain boundary, can be used to establish structure-property relationships. Using the fundamental zone representation, trends in computed energy, excess volume at the grain boundary, and temperature-dependent mobility naturally emerge and show a strong dependence on the boundary plane orientation. Analysis of common misorientation axes even suggests broader trends of grain boundary energy as a function of misorientation angle and plane orientation. Due to the strong structure-property relationships that naturally emerge from this work, boundary plane fundamental zones are expected to simplify analysis of both computational and experimental data. This standardized representation has the potential to significantly accelerate research in the topologically complex and vast five-dimensional phase space of grain boundaries.

36 MATERIALS SCIENCE↗

Quantifying Main Trends in Lysozyme Nucleation: The Effects of Precipitant Concentration, Supersaturation and Impurities

Full factorial experimental design incorporating multi-linear regression analysis of the experimental data allows quick identification of main trends and effects using a limited number of experiments. In this study these techniques were employed to identify the effect of precipitant concentration, supersaturation, and the presence of an impurity, the physiological lysozyme dimer, on the nucleation rate and crystal dimensions of the tetragonal forin of chicken egg white lysozyme. Decreasing precipitant concentration, increasing supers aturation, and increasing impurity, were found to increase crystal numbers. The crystal axial ratio decreased with increasing precipitant concentration, independent of impurity.

Burke, Michael W.↗

Hydrogen Evolution on Electrode‐Supported Pt n Clusters: Ensemble of Hydride States Governs the Size Dependent Reactivity

Abstract We report the size‐dependent activity and stability of supported Pt 1,4,7,8 for electrocatalytic hydrogen evolution reaction, and show that clusters outperform polycrystalline Pt in activity, with size‐dependent stability. To understand the size effects, we use DFT calculations to study the structural fluxionality under varying potentials. We show that the clusters can reshape under H coverage and populate an ensemble of states with diverse stoichiometry, structure, and thus reactivity. Both experiment and theory suggest that electrocatalytic species are hydridic states of the clusters (≈2 H/Pt). An ensemble‐based kinetic model reproduces the experimental activity trend and reveals the role of metastable states. The stability trend is rationalized by chemical bonding analysis. Our joint study demonstrates the potential‐ and adsorbate‐coverage‐dependent fluxionality of subnano clusters of different sizes and offers a systematic modeling strategy to tackle the complexities.

Zhang, Zisheng↗

Hydrogen Evolution on Electrode–Supported Ptn Clusters: Ensemble of Hydride States Governs the Size Dependent Reactivity

We report the size-dependent activity and stability of supported Pt1,4,7,8 for electrocatalytic hydrogen evolution reaction, and show that clusters outperform polycrystalline Pt in activity, with sizedependent stability. To understand the size effects, we use DFT calculations to study the structural fluxionality under varying potentials. We show that the clusters can reshape under H coverage and populate an ensemble of states with diverse stoichiometry, structure, and thus reactivity. Both experiment and theory suggest that electrocatalytic species are hydridic states of the clusters (~2 H/Pt). An ensemble-based kinetic model reproduces the experimental activity trend and reveals the role of metastable states. Furthermore, the stability trend is rationalized by chemical bonding analysis. Our joint study demonstrates the potential- and adsorbate-coverage-dependent fluxionality of subnano clusters of different sizes and offers a systematic modeling strategy to tackle the complexities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uncertainty analysis of correlated parameters in automated reaction mechanism generation

Abstract Uncertainty analysis is a useful tool for inspecting and improving detailed kinetic mechanisms because it can identify the greatest sources of model output error. Owing to the very nonlinear relationship between kinetic and thermodynamic parameters and computed concentrations, model predictions can be extremely sensitive to uncertainties in some parameters while uncertainties in other parameters can be irrelevant. Error propagation becomes even more convoluted in automatically generated kinetic models, where input uncertainties are correlated through kinetic rate rules and thermodynamic group values. Local and global uncertainty analyses were implemented and used to analyze error propagation in Reaction Mechanism Generator (RMG), an open‐source software for generating kinetic models. A framework for automatically assigning parameter uncertainties to estimated thermodynamics and kinetics was created, enabling tracking of correlated uncertainties. Local first‐order uncertainty propagation was implemented using sensitivities computed natively within RMG. Global uncertainty analysis was implemented using adaptive Smolyak pseudospectral approximations as implemented in the MIT Uncertainty Quantification Library to efficiently compute and construct polynomial chaos expansions to approximate the dependence of outputs on a subset of uncertain inputs. Cantera was used as a backend for simulating the reactor system in the global analysis. Analyses were performed for a phenyldodecane pyrolysis model. Local and global methods demonstrated similar trends; however, many uncertainties were significantly overestimated by the local analysis. Both local and global analyses show that correlated uncertainties based on kinetic rate rules and thermochemical groups drastically reduce a model's degrees of freedom and have a large impact on the determination of the most influential input parameters. These results highlight the necessity of incorporating uncertainty analysis in the mechanism generation workflow.

Gao, Connie W.↗

Liquid Chromatography Mass Spectrometry study of eutectic bis(2,2-dinitropropyl) acetal/formal

This study is the first attempt to document methodology development undergone using liquid chromatography tandem quadrupole time of flight mass spectrometry (LC-QTOF) to investigate degradation products of eutectic bis(2,2-dinitropropyl) acetal/formal nitroplasticizer (called NP here). Method properties investigated are: desolvation temperature (°C) and spray voltage (V) of the electrospray ionization source, and the development of an acetone system rinse to prevent any residual contamination between sample injections. Details are given on why it is essential to investigate method optimization with changes shown in MS/MS analysis in addition to MS results. Trends in MS/MS analytic results reveal important relationships between baseline and aged materials. In addition to verification of previously proposed fragments, insights offered by this newly developed methodology will also identify new degradation products and shed light on the complexity of NP degradation chemistry.

36 MATERIALS SCIENCE↗

Do Remote Camera Arrangements and Image Capture Settings Improve Individual Identification of Golden Eagles?

Individual identification of animals from camera traps has become an important task in wildlife research, but camera deployment methods often do not facilitate this important undertaking. Identification of individual golden eagles (Aquila chrysaetos) is possible using uniquely marked rectrices, but no studies have explored methods to maximize the rate of individual identification from camera images. Furthermore, our objectives were to assess whether different camera heights (1 m vs. 3 m), image capture settings (one image after a 1-min delay vs. burst of 5 images after a 30 sec delay), and arrangements relative to bait (dorsally vs. ventrally aimed) affected views of rectrices on golden eagles and our ability to identify individuals. We conducted our study from 15 December 2016 to 3 March 2017 on the Savannah River Site, South Carolina. First, we developed a scoring system based on views of rectrices and used a linear mixed-effects model to compare image scores among different camera arrangements and image settings. Next, after identifying individual eagles, we used generalized linear mixed-effects models to compare total individual eagle detections, total days an individual was detected, and probability of obtaining an unknown individual identification among camera arrangements and settings. Overall, we scored a total of 27,499 images, with 8,083 providing views of marked rectrices that allowed identification of 18 individual eagles. Average image scores and proportion of images suitable for individual identification were higher from elevated (3 m) camera arrangements than standard arrangements (1 m) across sites. Regardless of camera height, faster frequency of image capture provided more images that could be used to identify individuals and the most trap days per individual. Researchers and managers should consider deploying elevated cameras traps with faster frequency of image capture to improve data quality and potential for analysis of golden eagle populations and trends across the species’ range.

60 APPLIED LIFE SCIENCES↗

Image Processing Pipeline for Fluoroelastomer Crystallite Detection in Atomic Force Microscopy Images

Phase transformations in materials systems can be tracked using atomic force microscopy (AFM), enabling the examination of surface properties and macroscale morphologies. In situ measurements investigating phase transformations generate large datasets of time-lapse image sequences. The interpretation of the resulting image sequences, guided by domain-knowledge, requires manual image processing using handcrafted masks. Here this approach is time-consuming and restricts the number of images that can be processed. Her in this study, we developed an automated image processing pipeline which integrates image detection and segmentation methods. We examine five time-series AFM videos of various fluoroelastomer phase transformations. The number of image sequences per video ranges from a hundred to a thousand image sequences. The resulting image processing pipeline aims to automatically classify and analyze images to enable batch processing. Using this pipeline, the growth of each individual fluoroelastomer crystallite can be tracked through time. We incorporated statistical analysis into the pipeline to investigate trends in phase transformations between different fluoroelastomer batches. Understanding these phase transformations is crucial, as it can provide valuable insights into manufacturing processes, improve product quality, and possibly lead to the development of more advanced fluoroelastomer formulations.

36 MATERIALS SCIENCE↗

Database-wide hazard modelling of the onset of DIII-D tearing modes with field features

The rate of onset (hazard) of tearing modes is modelled probabilistically using statistical learning algorithms. Axisymmetric energy-density equilibrium fields are taken as raw high-dimensional input features which are reduced with principal component analysis. Signal processing of non-axisymmetric magnetics fluctuation array data provides the target information from which to learn. Model selection, visualization and calibration assessment procedures are detailed. Here, the analysis is deployed at large scale across the DIII-D tokamak database. Standard model selection criteria suggest that the energy-density post-processed feature is a better choice for modelling the onset rate compared to the non-processed equilibrium reconstruction solution. Two example applications of the learned rate function are demonstrated: (i) proximity-to-onset discharge monitoring and (ii) database analysis showing an (expected) observational global trend that the general hazard increases as a plasma performance metric increases. An important connection between the hazard function and its use as a conditional probability generator is reviewed in the Appendix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of B 2 O 3 on the Growth, Structural, and Magneto-Optical Properties of Yttrium Iron Garnet Single-Crystal Fibers

This study explores the fabrication of yttrium iron garnet (YIG) single crystal fibers using the laser heated pedestal growth (LHPG) method with the experimental addition of B 2 O 3 . The incorporation of B 2 O 3 facilitates the fiber fabrication process by lowering the required growth temperatures and likely modifying melt viscosity behavior, consistent with the established fluxing behavior of B2O3 and the comparative viscosity trend observed in the TMA−VFT analysis, thereby improving process efficiency while maintaining fiber quality. Structural characterization using EBSD and SC-XRD reveals a transition from polycrystalline to single-crystal behavior, with improved alignment along the [111] direction without altering the garnet structure. Magnetic measurements show increases in saturation magnetization in B 2 O 3 -assisted fibers. Three-dimensional anisotropy energy modeling, based on EBSD-derived Euler angles, indicates that the enhanced crystallinity and orientation contribute to reorientation of MCA energy distribution due to improved crystallographic alignment. Faraday rotation measurements show that the B 2 O 3 -assisted sample exhibits a rotation angle closer to reported values for high-quality YIG, suggesting improved phase purity and crystallographic quality. These findings demonstrate that B 2 O 3 -assisted LHPG growth is a scalable and nontoxic approach to producing high-performance YIG fibers for integrated photonic and magnetic field sensing applications.

Crystal structure↗

Synthesis and Computational Analysis of Uranium(III)-Pnictogen Bonds

In this report, we describe the synthesis and characterization of two novel complexes that contain uranium(III)-pnictogen (P: 1-PMes 2 ; As: 1-AsMes 2 ) bonds to elucidate the degrees of covalency among these bonds. To our knowledge, this is the first reported uranium(III)-arsenic complex to be synthesized and characterized. Analysis of the phosphorus and arsenic bonds reveals a similar electronic environment, assessed by UV–vis NIR, that is comparable to other previously reported uranium(III) complexes. A computational analysis of these compounds and their congeners, N, Sb, and Bi, was performed to identify trends in the overall bonding character of the complexes. This analysis shows that bond covalency decreases as the pnictogen becomes heavier and that overall the interaction energy and its components decrease down the group. Here, this study provides an in-depth analysis and understanding of the nature of bonding between hard actinide and soft pnictogen centers.

Actinides↗

Growth and Structure of Cu and Au on the Nonpolar ZnO(10$\bar{1}$0) Surface: STM, XPS, and DFT Studies

The morphology and electronic structure of Cu and Au clusters deposited via thermal evaporation onto ZnO(10$\bar{1}$0) substrates have been studied via scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). The initial stages of nucleation and growth (~0.2 ML) of both Cu and Au are compared with density functional theory (DFT) calculations, which show an excellent agreement with the cluster morphologies observed by STM, with Cu nucleating three-dimensional (3D) islands even at small coverage while Au nucleates single-layer islands that grow layer by layer. DFT also gives insight into the diffusion behavior of Cu and Au adatoms on the ZnO substrate, showing strongly anisotropic diffusion barriers for Cu atoms which results in the experimentally observed preferential cluster nucleation along [0001] step edges, whereas Au shows no such anisotropy and Au clusters are observed to have no preferred nucleation sites. XPS results show a slight positive charging of the small Cu clusters at 0.2 ML coverage, which disappears at higher coverage. The single-layer Au islands formed at low coverage show some evidence of positive charging as well, which likewise disappears with increasing cluster size. Additionally, the Au clusters show a trend of increasing metallicity as the clusters grow and transition from single-layer islands to 3D structures, demonstrated by the increasing asymmetry in the Au 4f line shape as a function of Au coverage. In general, the observed charge transfer trends are supported by Bader charge analysis.

36 MATERIALS SCIENCE↗

Chemical effects on subcritical fracture in silica from molecular dynamics simulations

Fracture toughness of silicates is reduced in aqueous environments due to water-silica interactions at the crack tip. In this paper, to investigate this effect, classical molecular dynamics (MD) simulations using the bond-order based reactive force field (ReaxFF) were used to simulate silica fracture. The chemical and mechanical aspects were separated by simulating fracture in: (a) vacuum with dynamic loading, (b) an aqueous environment with dynamic loading, and (c) an aqueous environment with static subcritical mechanical loading to track silica dissolution. The addition of water to silica fracture reduced the silica fracture toughness by ~25%, a trend consistent with experimentally reported results. Analysis of Si-O bonds in the process zone and calculations of dissipation energy associated with fracture indicated that water relaxes the entire process zone, and not just the surface. Additionally, the crack tip sharpens during fracture in water and an increased number of microscopic propagation events occur. This results in earlier fracture in systems with increasing mechanical loading in aqueous conditions, despite the lack of significant silica dissolution. Finally and therefore, the threshold for Si-O bond breakage has been lowered in the presence of water and the reduction in fracture toughness is due to structural and energetic changes in the silica, rather than specific dissolution events.

58 GEOSCIENCES↗

Probing solvation and reactivity in ionized polycyclic aromatic hydrocarbon–water clusters with photoionization mass spectrometry and electronic structure calculations

Polycyclic aromatic hydrocarbons (PAHs) may comprise up to 20% of the carbon budget in our galaxy and most PAHs condense onto water-rich icy grain mantles. Benzene–water clusters have been invoked as model systems for studying the photo-processing of water ice mantles containing PAHs. However, there is a paucity of information on larger aromatics, where the extended π cloud could affect photo-processing. Here in this study, tunable vacuum ultraviolet (VUV) photoionization of naphthalene–water clusters N x (H 2 O) y (N denotes naphthalene) is performed using synchrotron radiation and analyzed by reflectron time-of-flight mass spectrometry. Naphthalene clusters up to x = 4 are generated as are naphthalene–water clusters up to y = 25. At low photon energy (<11 eV), the naphthalene moiety is ionized and there is no proton transfer from N + to the water sub-cluster, which is very different from the benzene–water system. Protonated products, N[(H 2 O) x H] + and OH radical addition product (NOH)[(H 2 O) x H] + are generated above 11 eV, suggesting that water sub-clusters dominate the dynamics at high photon energies. Ab initio calculations are performed to decipher the experimental results. Energetics of the neutral structures N(H 2 O) 1–4 and their photoionized counterparts are calculated, including ionization on the N moiety as well as on the water sub-cluster. Energy decomposition analysis (EDA) is performed to understand trends in the binding between the naphthalene and the water sub-cluster in the ionized species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of a structural gradient in Winsor-III microemulsion systems

Here, we demonstrate here for the first time via small-angle neutron scattering (SANS) that the middle, bicontinuous microemulsion (BμE) phase of Winsor-III systems undergoes a gradual change of structure and composition in the vertical direction, contrary to the commonly held belief of uniform structure and composition. A vertical stage was deployed to enable precise alignment of a custom-designed rectangular cell containing the W III system with respect to the neutron beam, allowing for several different vertical positions to be analyzed. For the water/AOT/CK-2,13 (two-tailed alkyl ethoxylate containing a 1,3-dioxolane linkage)/heptane Winsor-III system, the quasi-periodic repeat distance ( d ) and correlation length (ξ), obtained from the Teubner–Strey model applied to the SANS data, decreased and the surface area per volume of the surfactant monolayer ( via Porod analysis) increased in the downward direction, trends that reflect an increase of surfactant concentration, consistent with the ultralow interfacial tension that often occurs for the lower liquid–liquid interface of many W III systems. The water/sodium dodecyl sulfate (SDS)/1-pentanol/dodecane system shared the same trend with regard to d as observed for AOT/CK-2,13. In contrast, for SDS/pentanol, ξ increased and the amphiphilicity factor ( f a ) decreased in the downward direction, trends consistent with a decrease of cosurfactant (pentanol) concentration in the downward direction. Non-uniformity in the vertical direction has implications in the transport of solutes between W III phases during the extractive purification of proteins or the removal of heavy metals and pollutants from wastewater, or the deposition of BμEs onto hydrophilic vs. hydrophobic surfaces as thin coatings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗