Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thinning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Residual stress and magnetic behavior of multiferroic CoFe{sub 2}O{sub 4}/Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} thin films

Multiferroic composite thin films consisting of CoFe{sub 2}O{sub 4} (CFO) and Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) layers were deposited through a combined route of rf magnetron sputtering and sol gel on Pt(111)/TiO{sub 2}/SiO{sub 2}/Si substrates. The coupling effects in the bilayered thin film were studied by looking at the relationships among the crystallite orientation, magnetic behavior, and the in-plane residual stress. Phase selective residual stress analysis conducted by using x-ray method demonstrated a close correlation between the stress imposed on the PZT layer and its texture. A change in the PZT layer orientation from (111) to (010) with the increasing layer thickness was observed in the multiferroic thin film as the system changes from an interface energy minimizing texture to a strain energy density minimizing texture. The CFO phase in the multiferroic thin films was preferably oriented in the (111) orientation. However, there is a change in magnetization as well as coercivity of the multiferroic thin films when the top PZT layer was varied in thickness. A close correlation between the magnetization and the in-plane stress in the CFO bottom layer imposed by the PZT film thickness was observed.

36 MATERIALS SCIENCE↗

Effects of SrRuO{sub 3} buffer layer thickness on multiferroic (Bi{sub 0.90}La{sub 0.10})(Fe{sub 0.95}Mn{sub 0.05})O{sub 3} thin films

Multiferroic (Bi{sub 0.90}La{sub 0.10})(Fe{sub 0.95}Mn{sub 0.05})O{sub 3} (BLFMO) thin films were deposited on SrRuO{sub 3} (SRO) buffered Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates with variable buffer layer thicknesses by using off-axis radio frequency sputtering. The orientation of BLFMO thin films is dependent on the SRO buffer layer thickness, which leads to a change in ferroelectric behavior. Due to the low leakage currents arising from the orientation change in association with the variation in SRO buffer layer thickness and the La and Mn codoping, well saturated P-E hysteresis loops (2P{sub r}approx210.0 muC/cm{sup 2} and 2E{sub c}approx525.5 kV/cm) are shown for the (111)-oriented BLFMO thin film at room temperature and 1 kHz. It also demonstrates little ferroelectric fatigue on 10{sup 9} switching cycles. Moreover, the BLFMO thin film exhibits the enhanced magnetic behavior as compared to pure BFO thin films, due to the canting of antiferromagnetically ordered spins.

36 MATERIALS SCIENCE↗

Orientation dependence of ferroelectric behavior of BiFeO{sub 3} thin films

Multiferroic BiFeO{sub 3} (BFO) thin films with (111), (100), (110) preferred, and random orientations were deposited by radio frequency magnetron sputtering on SrRuO{sub 3}-buffered SrTiO{sub 3}(111), SrTiO{sub 3}(100), SrTiO{sub 3}(110), and Pt(111)/Ti/SiO{sub 2}/Si(100) substrates, respectively. The orientation dependences of ferroelectric and fatigue behavior of the BFO thin films were investigated. As expected, the (111)-oriented BFO thin film exhibits the highest, giant ferroelectric polarization (2P{sub r}=196.9 muC/cm{sup 2}) at 1 kHz and room temperature using positive up negative down measurement, while the (100)-oriented BFO thin film possesses an almost fatigue-free behavior up to 5.25x10{sup 7} switching cycles when measured at 100 kHz and room temperature. The observed behavior confirms that the largest spontaneous polarization direction and the fatigue endurance are (111) and (100) for BFO thin films, respectively. Regardless of the film orientation, the charge carriers that are responsible for dielectric relaxation and conductivity are oxygen vacancies (V{sub O}) .

36 MATERIALS SCIENCE↗

Enhancement in the photocatalytic nature of nitrogen-doped PVD-grown titanium dioxide thin films

Nitrogen-doped titanium dioxide semiconductor photocatalytic thin films have been deposited by unbalanced reactive magnetron physical vapor deposition on glass substrates for self-cleaning applications. In order to increase the photocatalytic efficiency of the titania coatings, it is important to enhance the catalysts absorption of light from the solar spectra. Bearing this fact in mind, a reduction in the titania semiconductor band-gap has been attempted by using nitrogen doping from a coreactive gas mixture of N{sub 2}:O{sub 2} during the titanium sputtering process. Rutherford backscattering spectroscopy was used in order to assess the composition of the titania thin films, whereas heavy-ion elastic recoil detection analysis granted the evaluation of the doping level of nitrogen. X-ray photoelectron spectroscopy provided valuable information about the cation-anion binding within the semiconductor lattice. The as-deposited thin films were mostly amorphous, however, after a thermal annealing in vacuum at 500 deg. C the crystalline polymorph anatase and rutile phases have been developed, yielding an enhancement in the crystallinity. Spectroscopic ellipsometry experiments enabled the determination the refractive index of the thin films as a function of the wavelength, while from the optical transmittance it was possible to estimate the semiconductor indirect band-gap of these coatings, which has been proven to decrease as the N-doping increases. The photocatalytic performance of the titania films has been characterized by the degradation rate of an organic reactive dye under UV/visible irradiation. It has been found that for a certain critical limit of 1.19 at. % of nitrogen doping in the titania anatase crystalline lattice enhances the photocatalytic behavior of the thin films and it is in accordance with the observed semiconductor band-gap narrowing to 3.18 eV. By doping the titania lattice with nitrogen, the photocatalytic activity is enhanced under both UV and visible light.

36 MATERIALS SCIENCE↗

Study of metal/ZnO based thin film ultraviolet photodetectors: The effect of induced charges on the dynamics of photoconductivity relaxation

Ultraviolet photoconductivity relaxation in ZnO thin films deposited by rf magnetron sputtering are investigated. Effect of oxygen partial pressure in the reactive gas mixture and film thickness on the photoconductivity transients is studied. A different photodetector configuration comprising ZnO thin film with an ultrathin overlayer of metals like Cu, Al, Sn, Au, Cr, and Te was designed and tested. Photoresponse signal were found to be stronger (four to seven times) in these configurations than the pure ZnO thin films. Sn(30 nm)/ZnO sample exhibits highest responsivity of {approx}8.57 kV/W whereas Te(20 nm)/ZnO structure presents highest sensitivity of {approx}31.3x10{sup 3} compared to unloaded ZnO thin film. Enhancement in the photoresponse of ZnO thin films is attributed to the change in surface conductivity due to induced charge carriers at the interface because of the difference in work function and oxygen affinity values of metal overlayer with the underlying semiconducting layer. Charge carrier transfer from the metal layer to ZnO creates a surplus of electrons at the interface; a fraction of which are captured by the defect centers (traps) at the surface whereas the remaining one represents free carriers in the conduction band and are responsible for the enhanced photoconductivity.

36 MATERIALS SCIENCE↗

The origin of oxygen in oxide thin films: Role of the substrate

During the growth of oxide thin films by pulsed laser deposition, a strong oxygen substrate-to-film transfer has been experimentally observed for SrTiO{sub 3} and LaAlO{sub 3} thin films epitaxially grown on {sup 18}O exchanged SrTiO{sub 3} and LaAlO{sub 3} substrates by secondary ion mass spectrometry depth profiling. This oxygen transfer effect can seriously change the respective thin film properties. Taking the oxygen substrate contribution to the overall oxygen balance into account, original ways to design material properties of oxide thin films can be envisioned like a controlled charge carrier doping of SrTiO{sub 3} thin films.

36 MATERIALS SCIENCE↗

Growth of ZnO:Al thin films onto different substrates

In this paper we present some results regarding undoped and doped ZnO thin films deposited on various substrates like glass, silicon and kapton by rf magnetron sputtering. The influence of the amount of aluminum as well as the usage of different substrates on the final photovoltaic properties of the thin films is studied. For this, structural-morphological and optical investigations on the thin films are conducted. It was found that three important factors must be taken into account for adjusting the final desired application intended for the deposited thin films. These factors are: deposition conditions, the nature of both the dopant material and the substrate. A comparison study between undoped and doped case is also realized. Smooth Al doped ZnO thin films with a polycrystalline structure and a lower roughness than undoped ZnO are obtained.

36 MATERIALS SCIENCE↗

Room temperature ferroelectric and magnetic investigations and detailed phase analysis of Aurivillius phase Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} thin films

Aurivillius phase Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} (BTF7C3O) thin films on {alpha}-quartz substrates were fabricated by a chemical solution deposition method and the room temperature ferroelectric and magnetic properties of this candidate multiferroic were compared with those of thin films of Mn{sup 3+} substituted, Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Mn{sub 0.3}O{sub 15} (BTF7M3O). Vertical and lateral piezoresponse force microscopy (PFM) measurements of the films conclusively demonstrate that BTF7C3O and BTF7M3O thin films are piezoelectric and ferroelectric at room temperature, with the major polarization vector in the lateral plane of the films. No net magnetization was observed for the in-plane superconducting quantum interference device (SQUID) magnetometry measurements of BTF7M3O thin films. In contrast, SQUID measurements of the BTF7C3O films clearly demonstrated ferromagnetic behavior, with a remanent magnetization, B{sub r}, of 6.37 emu/cm{sup 3} (or 804 memu/g), remanent moment = 4.99 Multiplication-Sign 10{sup -5} emu. The BTF7C3O films were scrutinized by x-ray diffraction, high resolution transmission electron microscopy, scanning transmission electron microscopy, and energy dispersive x-ray analysis mapping to assess the prospect of the observed multiferroic properties being intrinsic to the main phase. The results of extensive micro-structural phase analysis demonstrated that the BTF7C3O films comprised of a 3.95% Fe/Co-rich spinel phase, likely CoFe{sub 2-x}Ti{sub x}O{sub 4}, which would account for the observed magnetic moment in the films. Additionally, x-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM) imaging confirmed that the majority of magnetic response arises from the Fe sites of Fe/Co-rich spinel phase inclusions. While the magnetic contribution from the main phase could not be determined by the XMCD-PEEM images, these data however imply that the Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} thin films are likely not single phase multiferroics at room temperature. The PFM results presented demonstrate that the naturally 2D nanostructured Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} phase is a novel ferroelectric and has potential commercial applications in high temperature piezoelectric and ferroelectric memory technologies. The implications for the conclusive demonstration of ferroelectric and ferromagnetic properties in single-phase materials of this type are discussed.

36 MATERIALS SCIENCE↗

Precise measurement of the transverse piezoelectric coefficient for thin films on anisotropic substrate

In this study, we propose a reliable measurement method for the effective transverse piezoelectric coefficient for thin films especially on anisotropic substrate. This coefficient for piezoelectric Pb(Zr, Ti)O{sub 3} (PZT) thin films was calculated by measuring the electric field-induced tip displacement of unimorph cantilevers composed of PZT thin films and Si substrates. We evaluated the reliability of the proposed measurement method by comparing it with numerical analysis and confirmed that the relative error of the piezoelectric coefficient (e{sub 31,f}) was less than 1%. We prepared 16 different unimorph cantilevers composed of identical PZT films on different Si beam geometries that had various substrate thicknesses and cantilever widths. Although the effective transverse piezoelectric coefficient e{sub 31,f} of PZT thin films ranged from -6.5 to -14 C/m{sup 2} as a function of the applied voltage, the difference among the 16 samples with an applied voltage of 25 V was within 10%. These results demonstrate that the proposed measurement method has sufficient reliability and can be used to evaluate the effective transverse piezoelectric coefficient e{sub 31,f} of thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First observation of magnetoelectric effect in M-type hexaferrite thin films

The magnetoelectric (ME) effect in M-type hexaferrite thin films is reported. Prior to this work, the ME effect in hexaferrite materials was observed only in bulk polycrystalline materials. Thin films of SrCo{sub 2}Ti{sub 2}Fe{sub 8}O{sub 19} were grown on sapphire (0001) using pulsed laser deposition. The thin films were characterized by X-ray diffractometer, scanning electron microscope, energy-dispersive spectroscopy, vibrating sample magnetometer, and ferromagnetic resonance. We measured saturation magnetization of 1250 G, g-factor of 2.66, and coercive field of 20 Oe for these magnetoelectric M-type hexaferrite thin films. The magnetoelectric effect was confirmed by monitoring the change rate in remanence magnetization with the application of DC voltage at room temperature and it gave rise to changes in remanence in the order of 12.8% with the application of only 1 V (DC voltage). We deduced a magnetoelectric coupling, {alpha}, of 6.07 Multiplication-Sign 10{sup -9} s m{sup -1} in SrCo{sub 2}Ti{sub 2}Fe{sub 8}O{sub 19} thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Zinc oxide thin film acoustic sensor

This paper reports the implementation of (750 nm) thickness of Zinc Oxide (ZnO) thin film for the piezoelectric pressure sensors. The film was prepared and deposited employing the spray pyrolysis technique. XRD results show that the growth preferred orientation is the (002) plane. A polycrystalline thin film (close to mono crystallite like) was obtained. Depending on the Scanning Electron Microscopy photogram, the film homogeneity and thickness were shown. The resonance frequency measured (about 19 kHz) and the damping coefficient was calculated and its value was found to be about (2.5538), the thin film be haves as homogeneous for under and over damped. The thin film pressure sensing was approximately exponentially related with frequency, the thin film was observed to has a good response for mechanical stresses also it is a good material for the piezoelectric properties.

36 MATERIALS SCIENCE↗

Studies on optoelectronic properties of DC reactive magnetron sputtered CdTe thin films

Cadmium telluride continues to be a leading candidate for the development of cost effective photovoltaics for terrestrial applications. In the present work two individual metallic targets of Cd and Te were used for the deposition of CdTe thin films on mica substrates from room temperature to 300 °C by DC reactive magnetron sputtering method. XRD patterns of CdTe thin films deposited on mica substrates exhibit peaks at 2θ = 27.7°, 46.1° and 54.6°, which corresponds to reflection on (1 1 1), (2 2 0) and (3 1 1) planes of CdTe cubic structure. The intensities of XRD patterns increases with the increase of substrate temperature upto 150 °C and then it decreases at higher substrate temperatures. The conductivity of CdTe thin films measured from four probe method increases with the increase of substrate temperature. The activation energies (ΔE) are found to be decrease with the increase of substrate temperature. The optical transmittance spectra of CdTe thin films deposited on mica have a clear interference pattern in the longer wavelength region. The films have good transparency (T > 85 %) exhibiting interference pattern in the spectral region between 1200 – 2500 nm. The optical band gap of CdTe thin films are found to be in the range of 1.48 – 1.57. The refractive index, n decreases with the increase of wavelength, λ. The value of n and k increases with the increase of substrate temperature.

36 MATERIALS SCIENCE↗

Effect of Dy/Nd double layer on coercivity in Nd-Fe-B thin films

The Nd-Fe-B (t{sub NFB} = 30 nm)/[Dy (t{sub Dy} nm)/Nd (t{sub Nd} nm)] (t{sub Dy/Nd} = 20 nm) (thickness t{sub Dy} = 0–10 nm) thin films were deposited on Al{sub 2}O{sub 3}(0001) substrate and subsequently in-situ annealed at 470 °C. As-deposited Nd-Fe-B thin films with a highly perpendicular orientation of c-axis were deposited by introducing bcc-Mo(111) single crystal buffer layer. After post-annealing, the grain size of the Nd-Fe-B/Dy/Nd thin films with the t{sub Dy} = 10 nm and t{sub Nd} = 10 nm becomes large due to the Dy and the Nd atoms thermal diffusion, while DyFe{sub 2} and Dy oxide compounds are formed in Nd-Fe-B layers, which is confirmed by means of a combination of atomic force microscopy observation and X-ray diffraction measurement. The H{sub c} of Nd-Fe-B/Dy/Nd thin films with the t{sub Dy} = 10 nm and t{sub Nd} = 10 nm was approximately the same value of the Nd-Fe-B thin films without Dy/Nd double layer annealed at 470 °C. On the other hand, H{sub c} is enhanced to be about 22.1 kOe in the annealed Nd-Fe-B/Dy/Nd films with the t{sub Dy} = 0.8 nm and t{sub Nd} = 19.2 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetoelectric coupling of multiferroic chromium doped barium titanate thin film probed by magneto-impedance spectroscopy

Thin film of BaTiO{sub 3} doped with 0.1 at. % Cr (Cr:BTO) has been prepared by pulsed laser deposition technique. Film was deposited on Pt/SrTiO{sub 3} substrate at 500 °C in 50 mTorr Oxygen gas pressure using KrF (298 nm) laser. Polycrystalline growth of single phase Cr:BTO thin film has been confirmed by grazing angle X-ray diffraction. Cr:BTO film exhibited remnant polarization 6.4 μC/cm{sup 2} and 0.79 MV/cm coercivity. Magnetization measurement of Cr:BTO film showed magnetic moment 12 emu/cc. Formation of weakly magnetic domains has been captured by magnetic force microscopy. Theoretical impedance equation fitted to experimental data in Cole-Cole plot for thin film in presence of transverse magnetic field resolved the increase in grain capacitance from 4.58 × 10{sup −12} to 5.4 × 10{sup −11} F. Film exhibited high value 137 mV/cm-Oe magneto-electric (ME) coupling coefficient at room temperature. The high value of ME coupling obtained can reduce the typical processing steps involved in multilayer deposition to obtain multiferrocity in thin film. Barium titanate being best ferroelectric material has been tailored to be multiferroic by non ferromagnetic element, Cr, doping in thin film form opens an avenue for more stable and reliable spintronic material for low power magnetoelectric random excess memory applications.

36 MATERIALS SCIENCE↗

Polarization switching characteristics of 0.5BaTi{sub 0.8}Zr{sub 0.2}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} lead free ferroelectric thin films by pulsed laser deposition

We report on the ferroelectricity for morphotropic-phase-boundary lead (Pb) free 0.5BaTi{sub 0.8}Zr{sub 0.2}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} (0.5BZT-0.5BCT) thin films. Thin films were grown on Pt/Ti/SiO{sub 2}/Si substrate using pulsed laser deposition. Raman spectroscopic data combined with the X-ray diffraction analyses confirm body centered tetragonal crystallographic structure 0.5BZT-0.5 BCT thin films on Pt/Ti/SiO{sub 2}/Si. Polarization studies demonstrate that these 0.5BZT-0.5BCT films exhibit a large remnant and saturation polarization of 37 μC/cm{sup 2} and 40 μC/cm{sup 2}, respectively, with a coercive field of 140 kV/cm. A correlation between polarization dynamics, structural distortion, and phonon vibration is established. The splitting of X-ray diffraction peak of the thin film in the 2θ range of 44.5° to 46.5° represents high degree of tetragonality. The tetragonality factor calculated by Rietveld analysis was found to be 0.006 and can be a major cause for the increased remnant polarization value. It is established from Raman spectra that the non-centrosymmetricity due to the displacement of Ti/Zr ions from its octahedral position is related to the peak position as well as the broadening of the A{sub 1} (LO) optical phonon mode. This increase of broadness in the thin film causes an increase in the dipole moment of the unit cell and, hence, the net increase in polarization values.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature dependence of gas sensing behaviour of TiO{sub 2} doped PANI composite thin films

In the present work we have reported the effect of temperature on the gas sensing properties of TiO{sub 2} doped PANI composite thin film based chemiresistor type gas sensors for hydrogen gas sensing application. PANI and TiO{sub 2} doped PANI composite were synthesized by in situ chemical oxidative polymerization of aniline at low temperature. The electrical properties of these composite thin films were characterized by I-V measurements as function of temperature. The I-V measurement revealed that conductivity of composite thin films increased as the temperature increased. The changes in resistance of the composite thin film sensor were utilized for detection of hydrogen gas. It was observed that at room temperature TiO{sub 2} doped PANI composite sensor shows higher response value and showed unstable behavior as the temperature increased. The surface morphology of these composite thin films has also been characterized by scanning electron microscopy (SEM) measurement.

36 MATERIALS SCIENCE↗

Structural and optical properties of Ni added ZnO thin films deposited by sol-gel method

Pure and Ni added zinc oxide thin films were prepared by sol-gel method using spin-coating technique on glass substrates. The influences of nickel on ZnO thin films are characterized by Powder X-ray diffraction study. Pure and Ni added thin films are hexagonal wurtzite structure without any secondary phase in c-axis orientation. The SEM images of thin films show uniform sphere like particles covered completely on glass substrates. All the films exhibit transmittance of 85-95% in the visible range up to 800nm and cut-off wavelength observed at 394 nm corresponding to the fundamental absorption of ZnO. The photoluminescence property for pure and Ni added ZnO thin films has been studied and results are presented in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The structural and in-plane dielectric/ferroelectric properties of the epitaxial (Ba, Sr)(Zr, Ti)O{sub 3} thin films

Epitaxial (Ba{sub 1-x}Sr{sub x})(Zr{sub 0.1}Ti{sub 0.9})O{sub 3} (BSZT, x = 0 – 0.45) thin films were deposited on (LaAlO{sub 3}){sub 0.3}(Sr{sub 2}AlTaO{sub 6}){sub 0.35} (LSAT) substrates by pulsed laser deposition. The experimental results demonstrate that the structural, dielectric, and ferroelectric properties of the BSZT thin films were greatly dependent on the strontium content. The BSZT thin films transformed from tetragonal to cubic phase when x ≥ 0.35 at room temperature. The Curie temperature and room-temperature remnant polarization decrease with increasing strontium concentration. The optimal dielectric properties were found in (Ba{sub 0.55}Sr{sub 0.45})(Zr{sub 0.1}Ti{sub 0.9})O{sub 3} thin films which is in paraelectric state, having tunability of 47% and loss tangent of 0.0338 under an electric field of 20 MV/m at 1 MHz. This suggests that BSZT thin film is a promising candidate for tunable microwave device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗