SEARCH · Engineering Papers

Results for “suspensions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

DOE OSTI2023

A Study on the Synthesis and Proton Transport Behavior of Multilayered ZSM-5 Zeolite Nanosheet Membranes Laminated on Polymer Substrates

Single crystalline ZSM-5 ZNs with thicknesses around 6 nm were obtained by secondary growth of silicalite nanoparticles using diquaternary bis-1,5(tripropyl ammonium) pentamethylene diiodide (dC5) as a structure-directing agent (SDA). The dC5 could be effectively removed from the ZN pores by either high-temperature calcination or UV irradiation in air at room temperature but not by the piranha solution treatment. Ultrathin ZN-laminated membranes (ZNLMs) were fabricated by sandwiching a UV-activated multilayered ZN film between two recast Nafion® layers (ZNLM-Nafion) and by filtration coating from a suspension of thermally activated ZNs on a nonionic porous PVDF (ZNLM-PVDF). The ZNLMs on both supports demonstrated the ability of highly proton-selective ion conduction with low resistances in aqueous electrolyte solutions. The ZNLM-PVDF with PVDF binder was structurally stable, and it achieved a comparably low ASR but much higher proton selectivity compared with a Nafion membrane of same overall thickness. However, detachment between the ZNLM and Nafion layers occurred when the ZNLM-Nafion operated in aqueous electrolyte solutions. Results of this study show the potential for developing ZNLMs as efficient proton-conducting membranes without using expensive ionic polymer matrices. However, the development of polymer-supported ZNLMs is hindered by the current inefficiency in preparing well-dispersed suspensions of open-pore ZNs. Future development of efficient methods for synthesizing open-pore ZNs in dispersed states is key to realizing high-performance ZNLMs on polymers.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Effect of Solvent on Fluorescence Emission from Polyethylene Glycol-Coated Graphene Quantum Dots under Blue Light Illumination

To explore aggregate-induced emission (AIE) properties, this study adopts a one-pot hydrothermal route for synthesizing polyethylene glycol (PEG)-coated graphene quantum dot (GQD) clusters, enabling the emission of highly intense photoluminescence under blue light illumination. The hydrothermal synthesis was performed at 300 °C using o-phenylenediamine as the nitrogen and carbon sources in the presence of PEG. Three different solvents, propylene glycol methyl ether acetate (PGMEA), ethanol, and water, were used for dispersing the PEG-coated GQDs, where extremely high fluorescent emission was achieved at 530–550 nm. It was shown that the quantum yield (QY) of PEG-coated GQD suspensions is strongly dependent on the solvent type. The pristine GQD suspension tends to be quenched (i.e., QY: ~1%) when dispersed in PGMEA (aggregation-caused quenching). However, coating GQD nanoparticles with polyethylene glycol results in substantial enhancement of the quantum yield. When investigating the photoluminescence emission from PEG-coated GQD clusters, the surface tension of the solvents was within the range of from 26.9 to 46.0 mN/m. This critical index can be tuned for assessing the transition point needed to activate the AIE mechanism which ultimately boosts the fluorescence intensity. The one-pot hydrothermal route established in this study can be adopted to engineer PEG-coated GQD clusters with solid-state PL emission capabilities, which are needed for next-generation optical, bio-sensing, and energy storage/conversion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Altering Terahertz Sound Propagation in a Liquid upon Nanoparticle Immersion

One of the grand challenges of new generation Condensed Matter physicists is the development of novel devices enabling the control of sound propagation at terahertz frequency. Indeed, phonon excitations in this frequency window are the leading conveyor of heat transfer in insulators. Their manipulation is thus critical to implementing heat management based on the structural design. To explore the possibility of controlling the damping of sound waves, we used high spectral contrast Inelastic X-ray Scattering (IXS) to comparatively study terahertz acoustic damping in a dilute suspension of 50 nm nanospheres in glycerol and on pure glycerol. Bayesian inference-based modeling of measured spectra indicates that, at sufficiently large distances, the spectral contribution of collective modes in the glycerol suspension becomes barely detectable due to the enhanced damping, the weakening, and the slight softening of the dominant acoustic mode.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Inclusion of Biological Targets in the Analysis of Electrical Characteristics of Non-Thermal Plasma Discharge

In Plasma Medicine studies, the effect of non-thermal plasma (NTP) on biological targets is typically correlated with the amount of stable reactive oxygen and nitrogen species produced in a liquid medium. The effect of NTP and the response of the biological target on cellular redox mechanisms is overlooked in these investigations. Additionally, the influence of electrical properties of cells on the physical properties of NTP is neglected. Therefore, we used a floating electrode dielectric barrier discharge plasma to explore the impact of cell structure, size, and viability of the biological target on the physical properties of NTP. Lissajous figures were used to determine circuit capacitance and energy per cycle during NTP exposure of different cell suspensions. We show that both, structural integrity and active enzymic processes of cells change the electrical properties of NTP. Correlations were also drawn between NTP-produced hydrogen peroxide and nitrite with measured capacitance. Our studies indicate that the observed changes between different cell suspensions may be due to a feedback loop between the biological target and the NTP source. In future studies, a more detailed analysis is needed to improve the control of clinical NTP devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

MOSAiC-Colorado State University Ice Spectrometer

This data set contains atmospheric ice nucleating particle (INP) measurements, using Colorado State University’s (CSU) Ice Spectrometer (IS), of filter collections taken at the U.S. DOE ARM AMF2 site onboard the R/V Polarstern P-deck during the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC) field campaign. Samples were collected from October 27, 2019 to September 24, 2020. A filter sampler was mounted approximately 15 m above ground level on a railing in proximity to (and approximately 3 m below) the Aerosol Observation System (AOS) inlet. Single-use filter units open to the atmosphere were pre-cleaned and pre-loaded with 47-mm diameter Nuclepore polycarbonate (0.2 µm pore-diameter) filters. Filters were typically drawn for a three-day period, with an average volume of air filtered of 87,000 standard liters. Total volumes were calculated through recorded daily flow rates using a mass flow meter (TSI). After collection, filters were stored and transported frozen until analysis using CSU’s IS instrument (McCluskey et al., 2018). Aerosol particles were first re-suspended in 8 mL of 0.1 µm-filtered deionized (DI) water. Aliquots of each suspension, and corresponding 11-fold dilutions, were dispensed into polymerase chain reaction (PCR) trays and placed into the aluminum blocks of the IS. Samples were cooled at approximately 0.33 °C min -1 and freezing detected optically with corresponding temperatures recorded. Cumulative INP concentrations were determined through calculating the number of INPs per mL of suspension (Vali, 1971) and converting to concentration per standard L of air by accounting for the proportion of liquid used and volume of air collected. All samples were corrected for the number of INPs on the average of four field blanks (cleaned, handled, transported, and analyzed in the same way without air flow). Two-tailed, 95% confidence intervals for binomial sampling are provided (Agresti and Coull, 1998). Select samples were also heat treated (95 °C for 20 min) to denature and deactivate biological INPs present and digested in 10% H 2 O 2 at 95 °C under UV-B for 20 min to remove any organic carbon INPs. Agresti, A, and BA Coull. 1998. "Approximate is better than “exact” for interval estimation of binomial proportions." American Statistics 52: 119–126. https://doi.org/10.2307/2685469 McCluskey, CS, J Ovadnevaite, M Rinaldi, J Atkinson, F Belosi, D Ceburnis, … and PJ DeMott. 2018. "Marine and Terrestrial Organic Ice-Nucleating Particles in Pristine Marine to Continentally Influenced Northeast Atlantic Air Masses." Journal of Geophysical Research: Atmospheres 123 (11): 6196–6212, https://doi.org/10.1029/2017JD028033 Vali, G. 1971. "Quantitative Evaluation of Experimental Results and the Heterogeneous Freezing Nucleation of Supercooled Liquids." Journal of the Atmospheric Sciences 28: 402-209. https://doi.org/10.1175/1520-0469(1971)028<0402:QEOERA>2.0.CO;2

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Arabidopsis GALACTURONOSYLTRANSFERASE (GAUT) 1 synthesizes a homogalacturonan tightly bound to the cell wall and required for cell expansion

Arabidopsis GALACTURONOSYLTRANSFERASE1 (GAUT1) synthesizes homogalacturonan (HG), the most abundant pectin in growing plant cells. GAUT1 has the greatest in vitro enzyme activity of the six confirmed Arabidopsis HG biosynthetic GAUTs, but its biological activity remains elusive. Here we show that Arabidopsis GAUT1 homozygous mutants have a severe dwarfed seedling phenotype, survive several weeks as 2 to 3 mm seedlings, and have severely reduced shoot and root growth and hypocotyl epidermal, cortex and endodermal cell size. gaut1-1 pollen tubes are shorter than WT with increased bursting. Complementation of homozygous gaut1-1 with GAUT1 coding sequence driven by the GAUT1 promoter restored WT-like growth. The extreme dwarf phenotype of homozygous gaut1-1 seedlings precluded their use for detailed cell wall analysis, thus suspensions cultures were produced from callus generated from mutant and WT seedlings. Homozygous gaut1-1 suspension cells were smaller than WT with ∼30% reduced wall GalA content compared to WT. Sequential extraction of the walls with increasingly harsh solvents and sugar composition analysis revealed reduced GalA content in only the 4M KOH post-chlorite fraction, indicating that GAUT1-synthesized HG was held tightly in the wall by direct or indirect hydrogen bonding and/or oxidation-sensitive linkages. Treatment of wall fractions with endopolygalacturonase to hydrolyze HG and gel electrophoretic separation of hydrolysates exposed an HG-associated doublet band markedly downregulated in the homozygous gaut1-1 4M KOH post-chlorite fraction and to a lesser extent in 4M KOH and sodium chlorite fractions. NMR analysis identified the band as rhamnogalacturonan (RG)-II. Super resolution microscopy using anti-HG antibodies showed that, compared to WT, the homozygous gaut1-1 hypocotyl epidermal and callus cells had reduced content and length of HG nanofilaments, HG fibers associated with cell expansion in Arabidopsis. The results demonstrate that GAUT1-synthesized HG resides in a tightly-cell-wall-bound, RG-II-containing polymer required for HG nanofilament formation and seedling cell expansion.

Atmodjo↗

NASA NTRS1961

Photosynthetic Gas Exchange in the Closed Ecosystem for Space. Phase II, Part II. Studies on the Growth of Thermophilic Chlorella 71105

Bench-scale studies with Chlorella pyrenoidosa 71105 were conducted in four- and eight-liter culture vessels, with and without recycling. It was established that the algal strain could be maintained for periods up to 72 days with supplemented re-cycled medium. In a factorial series of experiments, the highest yields were obtained with a 2.0% concentration of carbon dioxide, a 0.07 dilution factor (nutrient dilution rate/culture volume), and an 8.5 ft(exp -1) ratio of light surface to liquid culture volume. Optimum pH and concentrations of the constituents of the growth medium were determined in corollary test-tube studies. Other test-tube studies showed that the nutrient medium used for mass culture could be stored up to five weeks at 25 C or at refrigerator temperature (4 C) with little change in nitrogen-urea level. Algal suspensions stored at 4 C remained viable for periods of at least 12 weeks; growth resumed after a lag period when stored suspensions were cultured at 39 C. Streptomycin was found suitable for controlling a blue-green containment.

ALGAE↗

NASA NTRS1971

Dynamic responses of railroad car models to vertical and lateral rail inputs

Simplified dynamic models were applied in a study of vibration in a high-speed railroad car. The mathematical models used were a four-degree-of-freedom model for vertical responses to vertical rail inputs and a ten-degree-of-freedom model for lateral response to lateral or rolling (cross-level) inputs from the rails. Elastic properties of the passenger car body were represented by bending and torsion of a uniform beam. Rail-to-car (truck) suspensions were modeled as spring-mass-dashpot oscillators. Lateral spring nonlinearities approximating certain complicated truck mechanisms were introduced. The models were excited by displacement and, in some cases, velocity inputs from the rails by both deterministic (including sinusoidal) and random input functions. Results were obtained both in the frequency and time domains. Solutions in the time domain for the lateral model were obtained for a wide variety of transient and random inputs generated on-line by an analog computer. Variations in one of the damping properties of the lateral car suspension gave large fluctuations in response over a range of car speeds for a given input. This damping coefficient was significant in reducing lateral car responses that were higher for nonlinear springs for three different inputs.

Sewall, J. L.↗

NASA NTRS1972

Aeolian processes on Mars - Erosive velocities, settling velocities, and yellow clouds.

Extremely high atmospheric wind velocities are needed to erode particulate matter on Mars. Settling velocities are roughly equivalent to terrestrial settling velocities for clay to fine sand-size particles; suspension transport may be dominant for fine particles on Mars. Yellow clouds suggest that required threshold erosion velocities are reached and that a great deal of fine-grained material is carried in suspension. Yellow cloud origins are concentrated over the southern latitudes and areas of major topographic relief. The cloud distribution pattern suggests that high threshold velocities are attained by transient atmospheric disturbances such as slope winds and dust devils.-

Arvidson, R. E.↗

NASA NTRS1972

Scanning mirror for infrared sensors

A high resolution, long life angle-encoded scanning mirror, built for application in an infrared attitude sensor, is described. The mirror uses a Moire' fringe type optical encoder and unique torsion bar suspension together with a magnetic drive to meet stringent operational and environmental requirements at a minimum weight and with minimum power consumption. Details of the specifications, design, and construction are presented with an analysis of the mirror suspension that allows accurate prediction of performance. The emphasis is on mechanical design considerations, and brief discussions are included on the encoder and magnetic drive to provide a complete view of the mirror system and its capabilities.

Anderson, R. H.↗

NASA NTRS1973

Satellite studies of suspended matter and aquatic interfaces in Delaware Bay

The author has identified the following significant results. Three successful ERTS-1 satellite passes have produced synoptic imagery showing distribution of suspended matter and aquatic interfaces over Delaware Bay and adjacent Atlantic coastal regions. The interfaces are a major hydrographic feature in Delaware Bay and frequently include regions of high convergence. In the upper and middle bay the interfaces tend to align along the flow axis of the river and parallel to the shoreline. A correlation has been found between the concentration of sand particles in suspension and the depth, suggesting that most of the heavier particles are lifted into temporary suspension over shoals and shallow areas by currents and waves. The second type of interface is primarily a tidal intrusion of shelf water into the bay during incipient flood tide, with associated discontinuities in salinity and temperature. The convergence properties of such fronts attract heavy accumulations of foam which were found to contain strong concentrations of heavy metals and other toxic substances.

Klemas, V.↗

NASA NTRS1973

The use of superconductivity in magnetic balance design

The magnetic field and field gradient requirements for magnetic suspension in a Mach 3, 6-in. diameter wind tunnel are stated, along with the power requirements for gradient coil pairs wound of copper operating at room temperature and aluminum cooled to 20 K. The power dissipated is large enough that the use of superconductivity in the coil design becomes an attractive alternative. The problems of stability and ac losses are outlined along with the properties of stabilized superconductors. A brief review of a simplified version of the critical state model of C. P. Bean is presented, and the problems involved in calculations of the ac losses in superconducting coils are outlined. A summary of ac loss data taken on pancake coils wound of commercially available Nb3Sn partially stabilized tape is presented and shown as leading to the U.Va. gradient coil design. The actual coil performance is compared with predictions based on the BNL results. Finally, some remarks are presented concerning scaling of the ac losses to larger magnetic suspension systems as well as prospects for improved performance using newer multifilament superconductors.

Moss, F. E.↗

NASA NTRS1973

Distribution and movement of suspended sediment in the Gulf of Mexico off the Texas coast

ERTS-1 imagery has proven very useful in studies of the distribution of suspended sediment in the Gulf of Mexico off the Texas coast. Moreover, by using suspended matter concentrations as tags on water masses, much information on water movement can be obtained. The utility of suspended sediment as a tracer is dependent on the sediment remaining in suspension long enough to travel an appreciable distance or to be visible on successive images. Although the evidence is not conclusive, it seems likely that much of the suspended sediment in Gulf of Mexico nearshore waters during normal seastate conditions has remained in suspension since the time of its entry into the Gulf of Mexico through rivers and tidal inlets.

Hunter, R. E.↗

NASA NTRS1973

Development of the Viking parachute configuration by wind tunnel investigation.

Several experimental investigations to obtain the drag performance of 10% scale-model disk-gap-band-type parachute assemblies trailing in the Viking forebody wake were conducted over the range of Mach 0.2 to 2.6. The wind-tunnel tests varied both the canopy trailing distance and ratio of suspension line length to canopy diameter. The data obtained permitted optimization of both parameters. Parachute drag performance in the forebody wake is markedly degraded transonically beginning at Mach 0.6, reaching a minimum value at Mach 1.0, then approaches the subsonic value for the selected configuration as Mach number is increased to 1.4. Further increase in Mach number causes the drag coefficient to again decline. A 20% increase in parachute-alone transonic drag coefficient was obtained by increasing suspension-line length ratio from 1.16 to 1.73.

Steinberg, S.↗

NASA NTRS1973

The use of a digital computer for investigation of the dynamic characteristics of a man while pressing vertically downward with the straight arm on the handle of a vibrator (instrument)

The dynamic characteristics of a man were investigated by the resonance method, by means of recordings of the amplitude-frequency characteristics of a vibrator straight arm human body system on a standard automatic recorder. Experiments were carried out with a specially constructed vibrator, the moving system of which was fastened to a bronze suspension with small losses. Vibrations of the handle, fastened to the moving system, were recorded with an accelerometer. The mass of the moving system m, rigidity of the suspension k and friction coefficient r of the vibrator (calibration) were determined by exact formulas.

Zazhivikhina, A. I.↗

NASA NTRS1973

Research on decreasing the noise of a jet

An investigation was conducted to determine the amount of noise reduction that could be obtained by communicating the axial vibrations of the nozzle of a jet engine to the suspension mechanism. Mathematical models were developed to establish the relationship of the parameters. The pressure pulsations in the jet were recorded by measuring microphones and the data were processed by statistical dynamics methods. It was determined that the jet noise spectrum was successfully changed with various mechanical suspension impedances.

Akelis, M. E.↗

NASA NTRS1974

Experimental determination of airplane mass and inertial characteristics

Current practices are evaluated for experimentally determining airplane center of gravity, moments of inertia, and products of inertia. The techniques discussed are applicable to bodies other than airplanes. In pitching- and rolling-moment-of-inertia investigations with the airplane mounted on and pivoted about knife edges, the nonlinear spring moments that occur at large amplitudes of oscillation can be eliminated by using the proper spring configuration. The single-point suspension double-pendulum technique for obtaining yawing moments of inertia, products of inertia, and the inclination of the principal axis provides accurate results from yaw-mode oscillation data, provided that the sway-mode effects are minimized by proper suspension rig design. Rocking-mode effects in the data can be isolated.

Wolowicz, C. H.↗

NASA NTRS1975

Early detection of disease program: Evaluation of the cellular immune response

Surfaces of normal, cultured, and mitogen-stimulated mouse lymphoid cells were examined by scanning electron microscopy (SEM). Lymphocytes with smooth, highly villous and intermediate surfaces were observed in cell suspensions from both spleens and thymuses of normal mice and from spleens of congenitally athymic (nude) mice. Several strain-specific surface features were noted, including the spine-like appearance of microvilli on C57B1/6 lymphocytes. Although thymus cell suspensions contained somewhat more smooth cells than did spleen cell preparations, lymphocyte derivation could not be inferred from SEM examination. Studies of cells stimulated with mitogenic agents for thymus-derived lymphocytes (concanavalin A) or for bone marrow-derived lymphocytes (lipopolysaccharide) suggested that, in the mouse, development of a complex villous surface is a general concomitant of lymphocyte activation and transformation.

Criswell, B. S.↗