Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface topography”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Data used in “Enguehard et al. 2022, Machine-Learning Functional Zonation Approach for Characterizing Terrestrial–Aquatic Interfaces: Application to Lake Erie”

The package contains the data layers used in “Enguehard et al. 2022, Machine-Learning Functional Zonation Approach for Characterizing Terrestrial–Aquatic Interfaces: Application to Lake Erie”. Spatial data layers include: topography, wetland vegetation cover, time series of Landsat’s enhanced vegetation index (EVI) between 1990 and 2020. The study aims to characterize coastal wetlands with particular focus on the co-variability between plant dynamics, topography, soil, and other environmental factors. We proposed a functional zonation approach based on machine learning clustering to identify the spatial regions, i.e., zones that capture these co-varied properties. This approach was applied to publicly available datasets along Lake Erie, in the Great Lakes Region

54 ENVIRONMENTAL SCIENCES↗

Combination of natural fiber Boehmeria nivea (ramie) with matrix epoxide for bullet proof vest body armor

Ballistic protection equipment, such as a bulletproof vest, is a soldier’s most important means of preserving life and survivability in extreme combat conditions. The bulletproof vests are designed to protect the user’s chest from injury without disturbing the ability to perform his duties. Aromatic polyamide or aramid fibers known under the trade name Kevlar, Trawon and so is synthetic fiber materials commonly used in the manufacture of bulletproof vests. This synthetic fibers have high tensile strength and ductility. Kevlar is expensive and imported material. In this study, will introduce local natural raw materials, ramie fiber (Boehmeria nivea) which is cheaper and environmentally friendly. It has enough tenacity and tensile strength as a bulletproof vest. This experiment uses two panels, there are Panel A as front surface of Panel B. Panel A is a combination of ramie and epoxide matrix, while panel B is only ramie. From several variations of experimental combinations between Panel A and Panel B, optimal combination obtained with 16 layers of panel A and 31-34 layers of panel B which is able to protect againts cal. 7.65 mm × 17 mm (.32 ACP) bullet fired through pistol .32 Pindad from a distance of 20 meters. Panel with a size of 20 cm × 20 cm has a total thickness between 12,922 to13,745 mm and a total weight between 506,26 to 520,926gram. Scanning electron microscopy (SEM) observations indicated that the porosity and surface area of the ramie fiber is smooth, fiber surfaces showed topography with micropores. SEM also showed well-arranged structure of fibers bonding. Energy Dispersive X-ray (EDX) analysis indicated 100 % carbon contents in ramie fiber. Test result indicates that panel from composite ramie-epoxide can reach the level 1of International Standard of NIJ - 010104. Compared to panel from polyester fiber, the panel from composite ramie-epoxide (0,50-0,52 kg) is lighter weight than panel polyester fiber (1,642 kg)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pilot Point Optimization of Mining Boundaries for Lateritic Metal Deposits: Finding the Trade-off Between Dilution and Ore Loss

Geological contacts in lateritic metal deposits (footwall topographies) often delineate the orebody boundaries. Spatial variations seen in such contacts are frequently higher than those for the metal grades of the deposit. Therefore, borehole spacing chosen based on the grade variations cannot adequately capture the geological contact variability. Consequently, models created using such boreholes cause high volumetric uncertainties in the actual and targeted ore extraction volumes, which, in turn, lead to high unplanned dilution and ore losses. In this paper, a method to design optimum ore/mining boundaries for lateritic metal deposits is presented. The proposed approach minimizes the dilution/ore losses and comprises two main steps. First, the uncertainty on the orebody boundary is represented using a set of stochastic realizations generated with a multiple-point statistics algorithm. Then, the optimal orebody boundary is determined using an optimization technique inspired by a model calibration method called Pilot Points. The pilot points represent synthetic elevation values, and they are used to construct smooth mining boundaries using the multilevel B-spline technique. The performance of a generated surface is evaluated using the expected sum of losses in each of the stochastic realizations. The simulated annealing algorithm is used to iteratively determine the pilot point values which minimize the expected losses. The results show a significant reduction in the dilution volume as compared to those obtained from the actual mining operation.

58 GEOSCIENCES↗

Effect of anodization parameters on the structural morphology of titanium in fluoride containing electrolytes

In the present work, formation of titania nanopores on titanium substrate was investigated in aqueous (sulphuric acid) and neutral organic (glycerol) electrolytes containing different concentrations of HF (0.1-0.2 M). The surface morphology, topography and phase structures were analyzed using scanning electron microscopy, atomic force microscopy and X-ray diffraction techniques, respectively. Under optimized electrolyte conditions, titania nanopore is obtained with the average pore diameter of 64 nm and 84 nm for aqueous and organic electrolytes, respectively. Atomic force microscope investigation shows that the porous layer forms under a competition of titania formation and oxide dissolution up to a limiting thickness of {approx} 75 nm and 100 nm respectively for aqueous and organic electrolytes. The porous structure was observed at 0.15 M HF concentration. It was found that depending on the electrolytes the pore diameter alters and also its concentration effected the porous structures formation. Compared to aqueous electrolytes, organic electrolytes showed larger diameter pores. From the X-ray diffraction measurement it is evident that the as prepared titania nanopores are amorphous in nature, whereas the anodized heat treated titania nanopores are in anatase phase. - Highlights: Black-Right-Pointing-Pointer Aqueous and organic electrolytes were used to synthesize nanoporous titania. Black-Right-Pointing-Pointer The surface morphology varies with various concentrations of HF. Black-Right-Pointing-Pointer Nanopores were formed at optimum HF concentration of 0.15 M. Black-Right-Pointing-Pointer Nanopore diameter was found to be affected by the electrolyte used.

36 MATERIALS SCIENCE↗

Remote Sensing and GIS data at 1km-grid over Chesapeake Bay used in “He et al. 2024, Effects of spatial variability in vegetation phenology, climate, landcover, biodiversity, topography, and soil property on soil respiration across a coastal ecosystem”

The package contains the data layers used in “He et al. 2024, Effects of spatial variability in vegetation phenology, climate, landcover, biodiversity, topography, and soil property on soil respiration across a coastal ecosystem”. The study aims to use multi-source remote sensing and GIS datasets to investigate the spatial heterogeneity and identify spatial zones with similar environmental characteristics and understand the primary driving factors affecting soil respiration within sub-ecosystems of the coastal ecosystem. We employed unsupervised hierarchical clustering analysis to identify spatial regions with distinct environmental characteristics, then determined the main driving factors using Random Forest regression and SHapley Additive exPlanations (SHAP). Spatial data layers include soil respiration, kernel Normalized Difference Vegetation Index (kNDVI) computed from Harmonized Landsat 8 and Sentinel-2 time series, climate variables from the Daymet dataset, land cover, biodiversity, topographical metrics, soil property, and tidal elevation.

54 ENVIRONMENTAL SCIENCES↗

Atomic-Scale Manipulation and In Situ Characterization with Scanning Tunneling Microscopy

Scanning tunneling microscope (STM) has presented a revolutionary methodology to nanoscience and nanotechnology. It enables imaging of the topography of surfaces, mapping the distribution of electronic density of states, and manipulating individual atoms and molecules, all at atomic resolutions. In particular, atom manipulation capability has evolved from fabricating individual nanostructures toward the scalable production of the atomic-sized devices bottom-up. The combination of precision synthesis and in situ characterization has enabled direct visualization of many quantum phenomena and fast proof-of-principle testing of quantum device functions with immediate feedback to guide improved synthesis. Several representative examples are reviewed to demonstrate the recent development of atomic-scale manipulation, focusing on progress that addresses quantum properties by design in several technologically relevant materials systems. Integration of several atomically precisely controlled probes in a multiprobe STM system vastly extends the capability of in situ characterization to a new dimension where the charge and spin transport behaviors can be examined from mesoscopic to atomic length scale. The automation of atomic-scale manipulation and the integration with well-established lithographic processes further push this bottom-up approach to a new level that combines reproducible fabrication, extraordinary programmability, and the ability to produce large-scale arrays of quantum structures.

47 OTHER INSTRUMENTATION↗

Laser polishing for topography management of accelerator cavity surfaces

Improved energy efficiency and reduced cost are greatly desired for advanced particle accelerators. Progress toward both can be made by atomically-smoothing the interior surface of the niobium superconducting radiofrequency accelerator cavities at the machine's heart. Laser polishing offers a green alternative to the present aggressive chemical processes. We found parameters suitable for polishing niobium in all surface states expected for cavity production. As a result, careful measurement of the resulting surface chemistry revealed a modest thinning of the surface oxide layer, but no contamination.

cavity surfaces↗

Effect of tip shape on line edge roughness measurement based on atomic force microscopy

Atomic force microscopy (AFM) is an important tool in line edge roughness (LER) measurements, where accuracy for line edge identification is influenced by the shape of the tip. In this article, the effect of tip shape on LER measurement based on AFM is studied theoretically. The formulas for calculating the distance between the measured and actual line edge of the sample are presented. The effects of the three kinds of tips with different shapes are experimentally compared for validation. Suggestions on how to reduce measuring error caused by tip shape are also given.

36 MATERIALS SCIENCE↗

Surface deformation coupled with self-organized pattern on a liquid anode of 1 atm DC glow discharge

Intricate, self-organized plasma structures observed above the surface of a liquid anode of atmospheric DC glow discharge were found to give rise to coherent, organized surface deformation and mechanical wave formation at the plasma–liquid interface. This new phenomenon indicates that the liquid is closely coupled to the plasma by the anode sheath’s electrohydrodynamic (EHD) force. A scientific question then arises: Do surface perturbations, coupled with the nonuniform surface charge distribution, enhance the electric field and induce self-organization? Using the reflective background-oriented schlieren technique, the liquid surface profile under the plasma pattern was measured for the first time. The results show that surface distortions are driven by the repulsive Coulomb force of nonuniform net-negative surface charge acted by the anode sheath field. The impacts of various operating parameters on the patterns and surface waves were examined, revealing the significance of gas heating and liquid charge relaxation time in the pattern formation mechanism. Time-resolved dynamics of a pulsed DC discharge indicated that the surface deformation only appeared after the establishment of plasma patterns. Statistically, the surface wave under the plasma has high wave numbers (8000–16000 m −1 ) and small amplitudes ($<$ 10 µm), generally found in the capillary wave regime. Yet the motion of surface deformations is in tandem with the plasma pattern and exhibits a nondispersive nature of constant phase velocity (0.1–0.4 m s −1 ), suggesting the dominant role of EHD force over the surface tension in the observed surface wave. These results indicate that the deformed liquid surface is driven by the EHD force of the plasma sheath. Although they share a similar geometry, the deformation and wave dynamics of the liquid surface do not stimulate a plasma pattern. Importantly, the complex EHD coupling in the plasma–liquid system raises awareness and new challenges for plasma control engineering, and the quantitative characteristics of the nondispersive surface wave are informative for advancing relevant theory and modeling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of a GPS-Derived Troposphere Model to Improve InSAR Deformation Estimates in the San Gabriel Valley, California

We evaluate the potential of troposphere models derived from ground meteorological data (pressure, temperature, and relative humidity) and Global Positioning System (GPS) data to improve InSAR measurements and models derived from them. We test this approach on an ERS-2/Envisat data set collected during a transient surface deformation episode that occurred from January to July 2005 in the San Gabriel Valley, southern California, USA. We find that the interferometric phase change observed over the corresponding period cannot be solely attributed to hydrological uplift associated with rising groundwater levels but also includes a significant contribution from differential tropospheric delay due to differing quantities of water vapor in the troposphere on the two SAR observation dates. We show that, if the tropospheric phase contribution is mistakenly interpreted as the range change associated with changes in groundwater storage, both the surface displacement and the groundwater storage coefficient may be overestimated by up to 30%. Finally, this method could be applied in real time where meteorological measurements are available near one or more GPS permanent site(s).

54 ENVIRONMENTAL SCIENCES↗

Nanofabrication of silicon surfaces for reduced virus adhesion

Nanofabrication is a remarkably effective technique to create desirable nanoscale patterns. Here, the effect of surface nanofabrication on altering virus adhesion to the substrates was examined. Arrays of nanoholes, 50 nm in diameter, 22 nm deep, and 100 nm in pitch distance, were created on silicon (Si) wafers by electron-beam lithography and reactive ion etching. MS2 coliphage, which is 26 ± 2 nm in diameter and is frequently used as a surrogate for human viruses, was applied to investigate the interaction between the virions and smooth or nanostructured Si surfaces. Scanning electron microscopy and atomic force microscopy along with surface wettability analyses revealed that the nanofabrication had the effect of reducing not only the number of viruses attached but also the strength of virus adhesion. These effects were ascribed to the presence of nanoholes, which were inaccessible to the virions due to the unique surface topographical parameters and the surface chemistry, resulting in the decrease of the overall solid contact area for MS2 attachment. The periodic spacing of the nanoholes also limited the unit landing area for MS2 particles, restricting the formation of MS2 aggregates and leading to the reduced amount of MS2 attachment. We anticipate that smart design of a surface’s chemical composition and nanostructure will offer a feasible solution to improve mitigations for controlling viral adhesion and transmission to and from food contact surfaces.

36 MATERIALS SCIENCE↗

Comparison of theory with the experimental characterization of the spatial frequency response of interferometers using a binary pseudo-random array sample

Experimental evaluations of the surface height response of an interference microscope using a binary pseudo-random array test sample are compared with a theory based on a Fourier optics model. Measurements of key instrument characteristics, including the illumination, imaging, and obscuring apertures of three different Mirau objectives, support the theoretical calculations. Agreement between experimental and theoretical modeling confirms the predictability of the spatial frequency response for the purpose of specification and optimization of instrument configuration for specific metrology tasks. The results also provide confidence in methods of compensating for the decrease in instrument response with spatial frequency.

Calibration↗

Surface structures of hybrid aligned liquid crystal network coatings containing reverse tilt domain

Controlled shape changes of polymerized liquid crystalline coatings is often achieved via prepatterning the molecular orientation of liquid crystal (LC) monomers at the stage of preparation. In this work, using the so-called hybrid alignment of the LC, we produce surface structures of positive Gaussian curvature of coatings without complex techniques such as photoalignment. A mixture of LC monomers coated onto a glass plate with planar alignment of the director is exposed to air, which promotes vertical alignment. The competing planar and homeotropic boundary conditions result in a) thickness dependent director and b) spontaneous formation of spindle-like regions, limited by disclination loops, that are called the reverse tilt domains (RTDs). Here, the disclination separates different director configurations inside and outside the RTD. The RTDs produce relatively big protrusions (100 – 600 nm) of the LC network coating. Actuation of the coating by heat increases the amplitude of RTD protrusions.

42 ENGINEERING↗

Exploring a Multi-resolution Approach Using AMIP Simulations

This study presents a diagnosis of a multi-resolution approach using the Model for Prediction Across Scales - Atmosphere (MPAS-A) for simulating regional climate. Four AMIP experiments are conducted for 1999-2009. In the first two experiments, MPAS-A is configured using global quasi-uniform grids at 120 km and 30 km grid spacing. In the other two experiments, MPAS-A is configured using variable-resolution (VR) mesh with local refinement at 30 km over North America and South America embedded inside a quasi-uniform domain at 120 km elsewhere. Precipitation and related fields in the four simulations are examined to determine how well the VR simulations reproduce the features simulated by the globally high-resolution model in the refined domain. In previous analyses of idealized aqua-planet simulations, the characteristics of the global high-resolution simulation in moist processes only developed near the boundary of the refined region. In contrast, the AMIP simulations with VR grids are able to reproduce the high-resolution characteristics across the refined domain, particularly in South America. This indicates the importance of finely resolved lower-boundary forcing such as topography and surface heterogeneity for the regional climate, and demonstrates the ability of the MPAS-A VR to replicate the large-scale moisture transport as simulated in the quasi-uniform high-resolution model. Outside of the refined domain, some upscale effects are detected through large-scale circulation but the overall climatic signals are not significant at regional scales. Our results provide support for the multi-resolution approach as a computationally efficient and physically consistent method for modeling regional climate.

Sakaguchi, Koichi↗

Onslow Beach Washover Fan Morphology from 2012 to 2015

Critical military training and testing on lands along the nation’s coastal and estuarine shorelines are increasingly placed at risk because of encroachment pressures in surrounding areas, impairments due to other anthropogenic disturbances, and changes in climate and sea level. The U.S. Department of Defense (DoD) intends to enhance and sustain its training and testing assets and also optimize its stewardship of natural resources through the development and application of an ecosystem-based management approach on DoD installations. To accomplish this goal, particularly for installations in estuarine/coastal environments, the Strategic Environmental Research and Development Program (SERDP) launched the Defense Coastal/Estuarine Research Program (DCERP) as a 10-year effort at Marine Corps Base Camp Lejeune (MCBCL) in North Carolina. The results of the second 5 years of the program (DCERP2) are presented in the DCERP2 Final Report.There were four overarching objectives of DCERP2. The first objective was to understand the effects of climate change impacts, including warming temperatures, variability in the hydrological cycle, storm events, and sea level rise on the coastal ecosystems at MCBCL from observations and measurements made over the 10-year program. The second objective was to understand the carbon cycle of the coastal and terrestrial ecosystems at MCBCL through a highly integrated sampling program. The third objective was to develop models, tools, and indicators to evaluate current and projected future ecosystem state changes and translate scientific findings into actionable information for installation managers. The last objective was to recommend adaptive management strategies to sustain ecosystem natural resources within the context of an active military installation.These grid files were created from data collected using a Riegl 3-D laser scanner. Millions of x, y, and z points from the F2 Washover Fan on Onslow Beach were processed using the MARS software package to define a bare-earth model. Grid files were imported into Golden Software Surfer version 19 for editing and exported from that application as .grd files. Files can be opened in Surfer or ArcMap, but the coordinate system information will be lost if opened in ArcMap. These data were collected to quantify the morphological changes that occur on a washover fan through time.

54 ENVIRONMENTAL SCIENCES↗

Coastal typologies and surface and subsurface characteristics of the Alaskan Beaufort Sea Coast

This dataset was generated to classify the Alaskan Beaufort Sea Coast (ABSC) into a set of distinct coastal typologies, to understand the surface and subsurface characteristics and variability of the ABSC, and to quantify relationships between these characteristics and historical rates of shoreline change. This geospatial dataset contains two csv files of points along the ABSC at a 50 m spacing, one for points sheltered by a barrier island and one for points exposed to the open ocean. Each point has a lat/lon location, and we have attributed to each point average values for elevation, historical long-term shoreline change rates, shoreline orientation, landcover, mean annual ground temperature, geomorphic unit, lithology, geology, ecological landscape unit, maximum thaw settlement potential, massive ice content, and segregated ice content. Each point is also assigned to one of 16 coastal typologies, determined by a hierarchical clustering algorithm on the elevation, shoreline change, orientation, and ground temperature data. There are 9 sheltered typologies and 7 exposed typologies, identified by an integer label in the last column of each csv file. The other two csv files contain the integer IDs and classes for the landcover and geomorphology datasets.

54 ENVIRONMENTAL SCIENCES↗

Aerial Captured Data and Processed Models in Beaumont-Port Arthur Region in Feb and Oct, 2023

Our Co-design team is from the University of Texas, working on a Department of Energy-funded project focused on the Beaumont-Port Arthur area. As part of this project, we will be developing climate-resilient design solutions for areas of the region. More on www.caee.utexas.edu.We used a DJI Mavic 2 Pro to capture aerial photos in Beaumont-Port Arthur, TX, in February 2023, including:I. Beaumont Soccer ClubII. Corps’ Port Arthur Resident OfficeIII. Halbouty Pump Station comprises its vicinityIV. Lamar University (Including Exxon Power Plants close to Lamar Univ.)V. MLK Boulevard for aerial images of the industry and the ship channelVI. Salt Water Barrier (include some aerial images about the Big Thicket)Aerial photos taken were through DroneDeploy autonomous flight, and models were processed through the DroneDeploy engine as well. All aerial photos are in .JPG format and contained in zipped files for each location.The processed data package including 3D models, geospatial data, mappings, point clouds, and the animation video of Halbouty Pump Station has various file types:- The Adobe Suite gives you great software to open .Tif files.- You can use LASUtility (Windows), ESRI ArcGIS Pro (Windows), or Blaze3D (Windows, Linux) to open a LAS file and view the data it contains.- Open an .OBJ file with a large number of free and commercial applications. Some examples include Microsoft 3D Builder, Apple Preview, Blender, and Autodesk.- You may use ArcGIS, Merkaartor, Blender (with the Google Earth Importer plug-in), Global Mapper, and Marble to open .KML files.- The .tfw world file is a text file used to georeference the GeoTIFF raster images, like the orthomosaic and the DSM. You need suitable software like ArcView to open a .TFW file.This dataset provides researchers with sufficient geometric data and the status quo of the land surface at the locations mentioned above. This dataset could streamline researchers' decision-making processes and enhance the design as well.In October 2023, we had our follow-up data collection, including:I. Beaumont Soccer ClubII. Shipping and Receiving Center at Lamar UniversityAfter the aerial collection, we obtained aerial photos of those two locations mentioned above, as well as processed data (such as point clouds and models).

2D mapping↗

Soil temperature and soil moisture raw data, permafrost table depths, and accompanying environmental variable data, Kenai Wildlife Refuge, 2019-2022

Data package purpose: This data package was created to contain all data used in an upcoming article, "Canopy Cover and Microtopography Control Precipitation-Enhanced Thaw of Ecosystem-Protected Permafrost." In review.This data package includes: Raw output from 19 distributed temperature profilers with a thermistor every 10 cm along a 160 cm length at a measurement interval of 15 minutes (.CSV). Raw output from two soil moisture and temperature profilers (90 cm length and 120 cm length) that took composite soil moisture readings every 15 cm along the sensor length at a measurement interval of 30 minutes (.CSV). Permafrost depths were measured annually in mid-September at DTP sensor locations (.CSV) and along an across-site transect (.CSV). Environmental variables (snow depth, canopy closure, moss depth, and elevation) for all sensor locations. Real-time kinetic (RTK) GPS points showing site microtopography (.CSV).Analysis software: Our analysis was done in Matlab. File types can be used with any software.

54 ENVIRONMENTAL SCIENCES↗