Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “supply”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Examining Supply-Side Options to Achieve 100% Clean Electricity by 2035

The growing climate emergency requires a dramatic and rapid reduction of greenhouse gas emissions in the United States and internationally. This study evaluates a variety of 100% clean electricity system scenarios in 2035 that could put the United States on a path to economy-wide net-zero emissions by 2050, specifically focusing on technical requirements, challenges, and cost implications. The results highlight there are multiple approaches to cost-effectively achieve a net-zero carbon grid in 2035.

100% clean electricity↗
DOE OSTI2022

Survey of the Worldwide Supply Chain of Commodities Needed for a Quantum Technology Program

Quantum Information Science (QIS) is an emerging technology being pursued by fundamental science research groups worldwide, as well as commercial companies and government programs. There are a variety of QIS disciplines, including quantum computing, quantum sensing and quantum encryption. Some of the commodities needed for a robust quantum laboratory are particular to quantum phenomenon, but in general the equipment needed is similar to that needed for a typical high - technology lab (e.g. oscilloscopes, lasers, vacuum chambers, etc.). This study focuses on identifying commodities manufactured worldwide that would be needed for a robust quantum lab. The authors' own knowledge of needed equipment and primary vendors was used as a starting point, follow ed by extensive internet searching and utilization of buyer's guides to create a large spreadsheet of most of the components needed, the company offering the components, and country of manufacture. With this extensive spreadsheet, stakeholders can identify commodities that would be needed for a quantum lab oratory and potentially identify market choke points.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Supply Chain Energy and Greenhouse Gas Analysis Using the Materials Flows through Industry (MFI) Tool: Examination of Decarbonization Technology Scenarios for the U.S. Glass Manufacturing Sector

Glass manufacturing is a major part of the U.S. economy, and glass products in multiple sectors - flat glass, container glass, and fiberglass - are a part of everyday life. Despite glass manufacturing's long history, there are still many opportunities for glass production to improve in terms of both in overall energy consumption and greenhouse gas (GHG) emission reduction. Scenarios for the flat, container, and fiberglass sectors show the effect that each improvement has on primary energy demand and GHG emissions, starting from an industry baseline that reflects current manufacturing practices. Using the National Renewable Energy Laboratory's Material Flows through Industry tool, multiple scenarios are examined for each glass sector by applying a combination of energy reduction, increased electrification, hydrogen cofiring, a more renewable electric grid, and increased use of cullet. Additional decarbonization options are possible for glass but are left for later analysis due to cost, feasibility, or data issues. Primary energy demand can be reduced by 75%-83% compared to baseline inputs, depending on the sector, and GHG emissions are reduced by 82%-86%. Applying the maximum level of improvements listed here has the potential to save over 300 million GJ and 25 million metric tons of GHGs by 2050.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Manufacturing Supply Chain Development for Modular Solar-Thermochemical Conversion Platform - CRADA 387 (Final Report)

Modular chemical process intensification (MCPI) is an emerging field where chemical processing is performed using small-scale modular equipment instead of conventional large centralized chemical plants. Conventional chemical plants benefit from economies of scale that encourage scale-up to ever larger plants. A goal of MCPI is to develop technology that intensifies processing so that equipment can be dramatically smaller and integrated into modular systems. Scale-up occurs by adding more modules in parallel rather than making the equipment larger. A key concept is that equipment and modules can ultimately be cheaper by leveraging economies of mass production, analogous to the automotive industry, in manufacturing the equipment. This project made significant progress toward this outcome by meeting the RAPID institute metric to reduce equipment cost by 20% for each doubling in manufacturing volume. The MCPI application was thermochemical technology that is being commercialized by STARS Technology Corporation, one of the CRADA partners. The technology converts solar and renewable power to chemical energy to produce renewable hydrogen, fuels, and chemicals. The benefit to the public is reduction in greenhouse gases that are contributing to climate change. The project transitioned the steam methane reforming (SMR) reactor from conventional fabrication methods to additive manufacturing (AM) direct metal laser sintering (DMLS) process. This is projected to reduce the cost of making a reactor by 58% when producing 100 reactors per year. Innovations in the DMLS process produced a patented design that reduces reactor weight by 60%. Reductions in material costs and processing time extend the DMLS advantage to higher production volumes. The new design promises to be 38% cheaper than the conventional processes at 1000 units per year. The resulting 87% reduction in the steam methane reforming (SMR) module cost in scaling from current costs meets the RAPID metric. The project was successful in producing and testing the first ever additively manufactured SMR reactors. A reactor achieved over 82% efficiency in converting electric power to chemical energy, which is a world record for an inductively heated SMR. The project has contributed to the design and assembly of a first demonstration plant that is headed to a hydrogen bus filling station in Thousand Palms, CA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Supply Chain Binary Program Assessment Annual Report

Secure environments face a steadily increasing threat from the introduction of scientific equipment that includes extensive software components. Devices such as powerful microscopes, 3d printers, programmable logic controllers, and many others, increase our capability and scientific output. Unfortunately, they now frequently include an entire computing stack with custom software bundled along with entire operating systems. Our ability to introspect and understand binary software is extremely limited, opening up the possibility of malicious third-parties including software that compromises our critical missions.

42 ENGINEERING↗
DOE OSTI2023

Modeling Gray Zone Tactics Used Against Green Energy Supply Chains

This report documents a project demonstrating capabilities within Lawrence Livermore National Laboratory’s Cyber and Infrastructure Resilience program to place newly developed numeric simulations into the current, larger geopolitical context. The emergence of state-backed gray zone threats introduces an unprecedented challenge because they fall short of armed conflict and involve ambiguous tactics, requiring a fresh analytical approach to understanding their potential impact and countering them. In the context of our project, we analyze how China might use gray zone tactics to degrade the power of the United States, including our influence over global efforts to combat climate change.

25 ENERGY STORAGE↗
DOE OSTI2024

Manufacturing Supply Chain Development for Modular Solar-Thermochemical Conversion Platform [Abstract]

We will develop a tunable pulsed electron source capable of generating variable intensity highly-focused electron pulses at high repetition rates. Specifically, we need to demonstrate a high-speed variable electron gun capable of generating a variable intensity electron pulse containing between 102 and 105 electrons with an accelerating voltage of 1kV focused into a spot size <100nm in diameter at with a pulse rate >10MHz (with path to 300MHz). This combined performance cannot be achieved by commercially available electron sources. The primary technology path selected for this work will be to use a photocathode approach, where an easily modulated UV laser is used to stimulate electron emission. The approach utilizes the advances made in the development of the Dynamic TEM (DTEM), though this project will be simpler in that the pulse intensity is lower and there is no requirement for coherency. Alternate paths, including using a traditional electron beam modulated using a v-shaped slit and electrostatically deflecting the beam to adjust intensity; will also be considered for future capabilities. The electron source will then be used generate optically stimulated luminescence (OSL) in lithium fluoride (LiF) substrates to demonstrate the potential for OSL to serve as a basis technology for next generation data storage systems.

42 ENGINEERING↗
DOE OSTI2024

Schematic for the CAEN backup Power-supply [Slides]

J158 in the schematic shown below is the physical power switch for the UDCM. You will see that we really only care about 3 pins on this physical switch, pins 1,2 and 6. we are going to splice between the switch and the board, meaning we are ‘effectively’ elevating this component to become part of our own module, and then have our module interface with the board. So when I say ‘Pin 1 Switch’ I am literally referring the Switch’s pin 1. Whereas when I say ‘Pin 1 Board’ I am talking about the part of the board that originally would have interfaced with pin 1 on the switch as shown in the lower left corner.

42 ENGINEERING↗
DOE OSTI2024

Evaluation of Directed Energy Deposition and Laser Powder Bed Fusion Nickel-Based Alloys Process Application Envelopes Based on Performance, Process Economics, Supply Chain Risks, and Reactor-Specific Targeted Components

The goal of the Advanced Materials and Manufacturing Technologies (AMMT) program is to accelerate the deployment of new materials and manufacturing technologies into advanced nuclear-related systems. Although 316H stainless steel fabricated by laser powder bed fusion (LPBF) has already been identified as an alloy that could have a significant effect on various reactor technologies, many other materials and manufacturing techniques are being evaluated. Nickel-based alloys typically offer higher-temperature capabilities compared with advanced stainless steels, and previous reports looked at three Ni-based alloy categories: low-Co alloys with a potential use close to the reactor core; high-temperature, high-strength alloys; and molten salt–compatible alloys. Due to the increasing interest in the low Co 625 alloy for nuclear applications, the alloy was compared at the Oak Ridge National Laboratory (ORNL) with 617, 230, two high-temperature, high-strength solution-strengthened alloys. Hot cracking could not be suppressed for alloy 230, and it was shown that these cracks, which were elongated along the build direction (BD), had a drastic effect on the ductility of alloy 230 at room temperature when specimens were machined perpendicular to the BD. Cracking was not as significant for alloy 617, but still led to significant variation in ductility at room temperature along the build direction. On the contrary, LPBF printing of crack-free alloy 625 was achieved using similar printing parameters, and the alloy looks like a very promising candidate for various reactor technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evaluation of DED and LPBF Fe-based Alloys Process Application Envelopes based on Performance, Process Economics, Supply Chain Risks, and Reactor-specific Targeted Components

The U.S. Department of Energy (DOE), Office of Nuclear Energy (NE), Advanced Materials and Manufacturing Technologies (AMMT) program aims to develop extreme-environment materials solutions for use in the deployment of advanced nuclear reactors and the sustainment of the current fleet. To achieve this objective, a combination of experiment, a computational tool, and machine learning (ML) for the design of materials is adopted for the maturation of materials for nuclear technology. Through advanced manufacturing techniques such as laser powder bed fusion (LPBF) and laser powder direct energy deposition (LP-DED), components with complex geometries can be fabricated with reduced time and effort. Such advanced manufacturing methods can also provide the opportunity to improve materials performance through optimized microstructures and mechanical properties. However, existing engineering alloys are not always well suited for fabrication with additive manufacturing (AM), as their compositions have been tuned to optimize fabrication via conventional methods. Thus, similar alloys with modified compositions that are better suited for AM can be studied for improved performance. Over the past three years, the AMMT teams from Argonne National Laboratory (ANL) and Pacific Northwest National Laboratory (PNNL) studied various known Fe-based alloys by evaluating their initial printability using LPBF, and an AMMT-developed down-selection and decision matrix reduced the number of alloys to be studied from six to three in fiscal year (FY) 2024. Additionally, in FY 2024, for parallel evaluation, these three alloys were studied using LPDED. While LPBF is better for small- to medium-sized components with high detail and internal features, LP-DED combines a material feed system to place the powder onto the exact spot where the laser will melt the material. This AM method can be easily scaled to extremely large components and provides high build rate speeds compared to those of conventional LPBF systems. Additionally, DED is a better choice for complex geometries and compositional gradients.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Bipartisan Infrastructure Law (BIL) – Illinois Rare Earth Novel Extraction and Supply (IRENES) - Report on Technology Down Select No. 1 - Acid Baking vs. Heap Leaching

An essential step for recovering rare earth and critical minerals from coal mine waste is one that achieves adequate dissolution of the target elements into a pregnant leachate solution. The simplest technical approach was thought to be heap-leaching that could proceed using mild acid dosing or naturally generated acid from biological activity. For this reason, the University of Kentucky at Lexington (UKY) undertook two efforts to evaluate feasibility, including a laboratory column leaching evaluation and a pilot heap-leaching demonstration. Later, the UK evaluated a pyrometallurgical approach using roasting combined with acid baking and tank leaching at elevated temperatures to improve extraction efficiencies. This report surveys the previously reported leaching yields and calculates the gross value of rare earth oxides as a basket in the pregnant leachate solution.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Utilization of Carbon Supply Chain Wastes and Byproducts to Manufacture Graphite for Energy Storage Applications

This project explored how coal and waste coal can be transformed into high-value graphite used in batteries for electric vehicles and power grids. A manufacturing technique that converts coal into carbon foam and subsequently graphite was developed and refined to improve the thermal and mechanical properties of the resulting materials. Cost-effectiveness and environmental impacts were also evaluated. Coal-derived graphite, especially when processed at high temperatures, was shown to perform comparably to commercial graphite in battery tests. Advanced computer simulations were used to model battery behavior and predict long-term performance, demonstrating that coal-based graphite has the potential to support electric vehicle deployment while reducing reliance on imported materials. This work offers a promising pathway for cleaner energy storage solutions and creates economic opportunities for coal-reliant communities by generating new uses for mining byproducts.

01 COAL, LIGNITE, AND PEAT↗