Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Isolation, characterization, and primary structure of rubredoxin from the photosynthetic bacterium, Heliobacillus mobilis

Rubredoxin is a small nonheme iron protein that serves as an electron carrier in bacterial systems. Rubredoxin has now been isolated and characterized from the strictly anaerobic phototroph, Heliobacillus mobilis. THe molecular mass (5671.3 Da from the amino acid sequence) was confirmed and partial formylation of the N-terminal methionyl residue was established by matrix-assisted laser desorption mass spectroscopy. The complete 52-amino-acid sequence was determined by a combination of N-terminal sequencing by Edman degradation and C-terminal sequencing by a novel method using carboxypeptidase treatment in conjunction with amino acid analysis and laser desorption time of flight mass spectrometry. The molar absorption coefficient of Hc. mobilis rubredoxin at 490 nm is 6.9 mM-1 cm-1 and the midpoint redox potential at pH 8.0 is -46 mV. The EPR spectrum of the oxidized form shows resonances at g = 9.66 and 4.30 due to a high-spin ferric iron. The amino acid sequence is homologous to those of rubredoxins from other species, in particular, the gram-positive bacteria, and the phototrophic green sulfur bacteria, and the evolutionary implications of this are discussed.

NASA Discipline Number 52-30↗
NASA NTRS2012

Characterizing 3D Vegetation Structure from Space: Mission Requirements

Human and natural forces are rapidly modifying the global distribution and structure of terrestrial ecosystems on which all of life depends, altering the global carbon cycle, affecting our climate now and for the foreseeable future, causing steep reductions in species diversity, and endangering Earth s sustainability. To understand changes and trends in terrestrial ecosystems and their functioning as carbon sources and sinks, and to characterize the impact of their changes on climate, habitat and biodiversity, new space assets are urgently needed to produce high spatial resolution global maps of the three-dimensional (3D) structure of vegetation, its biomass above ground, the carbon stored within and the implications for atmospheric green house gas concentrations and climate. These needs were articulated in a 2007 National Research Council (NRC) report (NRC, 2007) recommending a new satellite mission, DESDynI, carrying an L-band Polarized Synthetic Aperture Radar (Pol-SAR) and a multi-beam lidar (Light RAnging And Detection) operating at 1064 nm. The objectives of this paper are to articulate the importance of these new, multi-year, 3D vegetation structure and biomass measurements, to briefly review the feasibility of radar and lidar remote sensing technology to meet these requirements, to define the data products and measurement requirements, and to consider implications of mission durations. The paper addresses these objectives by synthesizing research results and other input from a broad community of terrestrial ecology, carbon cycle, and remote sensing scientists and working groups. We conclude that: (1) current global biomass and 3-D vegetation structure information is unsuitable for both science and management and policy. The only existing global datasets of biomass are approximations based on combining land cover type and representative carbon values, instead of measurements of actual biomass. Current measurement attempts based on radar and multispectral data have low explanatory power outside low biomass areas. There is no current capability for repeatable disturbance and regrowth estimates. (2) The science and policy needs for information on vegetation 3D structure can be successfully addressed by a mission capable of producing (i) a first global inventory of forest biomass with a spatial resolution 1km or finer and unprecedented accuracy (ii) annual global disturbance maps at a spatial resolution of 1 ha with subsequent biomass accumulation rates at resolutions of 1km or finer, and (iii) transects of vertical and horizontal forest structure with 30 m along-transect measurements globally at 25 m spatial resolution, essential for habitat characterization. We also show from the literature that lidar profile samples together with wall-to53 wall L-band quad-pol-SAR imagery and ecosystem dynamics models can work together to satisfy these vegetation 3D structure and biomass measurement requirements. Finally we argue that the technology readiness levels of combined pol-SAR and lidar instruments are adequate for space flight. Remaining to be worked out, are the particulars of a lidar/pol-SAR mission design that is feasible and at a minimum satisfies the information and measurement requirement articulated herein.

Hall, Forrest G.↗
DOE OSTI2024

Structural and functional characterization of IgG- and non-IgG-based T-cell-engaging bispecific antibodies

Bispecific T-cell-engaging antibodies are a growing class of therapeutics with numerous molecules being tested in clinical trials and, currently, seven of them have received market approval. They are structurally complex and function as adaptors to redirect the cytotoxicity of T cells to kill tumor cells. T-cell-engaging bispecific antibodies can be generally divided into two categories: IgG/IgG-like and non-IgG-like formats. Different formats may have different intrinsic potencies and physiochemical properties, and comprehensive studies are needed to gain a better understanding of how the differences in formats impact on structural and functional characteristics. In this study, we designed and generated bispecific T-cell-engaging antibodies with IgG-like (DVD-Ig) and non-IgG (BiTE) formats. Both target the same pair of antigens (EGFR and CD3) to minimize the possible influence of targets on functional characterization. We performed a side-by-side comparison to assess differences in the physiochemical and biological properties of these two bispecific T-cell-engaging antibodies using a variety of breast and ovarian cancer cell-based functional assays to delineate the structural–functional relationships and anti-tumor activities/potency. We found that the Fc portion of T-cell-engaging bispecific antibodies can significantly impact antigen binding activity, potency, and stability in addition to eliciting different mechanisms of action that contribute the killing of cancer cells.

cluster of differentiation 3 (CD3)↗
DOE OSTI2025

X-ray Spectroscopy Characterization of Electronic Structure and Metal–Metal Bonding in Dicobalt Complexes

Developing multimetallic complexes with tunable metal–metal interactions has long been a target of synthetic inorganic chemistry efforts due to the unique properties that such compounds can exhibit. However, understanding relationships between metal–metal bonding and chemical properties is challenging due to system-dependent factors that influence metal–metal and metal–ligand interactions, including ligand identity, coordination geometry, and metal–metal distance. In this work, we apply X-ray absorption and emission spectroscopy and quantum chemical calculations to describe electronic structure and bonding in a series of dicobalt complexes. The compounds with silane ligands and pseudo-octahedral coordination geometry exhibit Co–Co σ and multicentered bonding character, which we characterize from both the occupied and vacant perspectives via their contributions to the Co X-ray emission and absorption spectra, respectively. In contrast, the dicobalt complexes with a pseudotetrahedral coordination environment do not exhibit Co–Co bonding due to symmetry constraints on orbital overlap. We extend these insights to the theoretical evaluation of related dicobalt complexes to explain how ligand coordination and symmetry dictate the presence or absence of a Co–Co bond. In conclusion, this work highlights how fundamental insights into electronic structure and bonding through X-ray spectroscopy uncover important factors governing metal–metal interactions and guide the rational design of multimetallic complexes with tunable metal–metal bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Salt-flux synthesis, crystal structure and theoretical characterization of Rb 0.74 Ga 6.62 Ti 0·38 O 11

Here single crystals of Rb 0.74 Ga 6.62 Ti 0·38 O 11 (RGTO) were grown from a mixed RbCl–RbF flux at 850 °C. The compound crystallizes in the RbGa 7 O 11 structure type, which is reminiscent of the hollandite and β-Ga 2 O 3 structure types. RGTO crystallizes in the monoclinic space group P2/m with lattice parameters a = 8.3355 (8) Å, b = 3.0286 (3) Å, c = 9.5028 (9) Å, and β = 114.620 (3)°. The crystal structure of RGTO is comprised of GaO 6 and mixed (Ga/Ti)O 6 octahedra and GaO 4 tetrahedra connected in a complex three-dimensional, anionic framework exhibiting eight-sided channels that are occupied by disordered Rb cations required for charge balance. First-principles calculations in the form of density functional theory were performed, which indicated the complex to be a charge transfer semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Identifying point defects and ordering in the high-entropy layered oxide Li 1.5 MO 3-δ (M=Mn, Al, Fe, Co, Ni) for energy storage applications

High-entropy layered oxides (HELOs) represent a very promising class of next-generation battery cathodes, combining the well-studied properties of layered cathode materials such as LiCoO 2 with the chemical tunability and stability of high-entropy materials. HELO materials often form particles with complex defects and domain structures, complicating accurate characterization of structure and cation mixing. Understanding disorder and order in HELO materials is necessary for understanding their performance and utility as cathodes. Here we demonstrate the characterization of the HELO Li 1.5 MO 3-δ (M = Mn, Al, Fe, Co, Ni), wherein X-ray powder diffraction, transmission electron microscopy imaging, and electron diffraction patterns are analyzed to reveal the presence of ordering in the HELO, with imaging and diffraction simulation employed to compare experimental results to atomic modeling. Finally, without rigorous characterization at the atomic scale, important features such as defect ordering can be easily overlooked and therefore remain unconsidered when interpreting experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural and spectroscopic characterization of an einsteinium complex

The transplutonium elements (atomic numbers 95–103) are a group of metals that lie at the edge of the periodic table. As a result, the patterns and trends used to predict and control the physics and chemistry for transition metals, main-group elements and lanthanides are less applicable to transplutonium elements. Furthermore, understanding the properties of these heavy elements has been restricted by their scarcity and radioactivity. This is especially true for einsteinium (Es), the heaviest element on the periodic table that can currently be generated in quantities sufficient to enable classical macroscale studies. Here we characterize a coordination complex of einsteinium, using less than 200 nanograms of 254 Es (with half-life of 275.7(5) days), with an organic hydroxypyridinone-based chelating ligand. X-ray absorption spectroscopic and structural studies are used to determine the energy of the L 3 -edge and a bond distance of einsteinium. Photophysical measurements show antenna sensitization of EsIII luminescence; they also reveal a hypsochromic shift on metal complexation, which had not previously been observed in lower-atomic-number actinide elements. Here, these findings are indicative of an intermediate spin–orbit coupling scheme in which j–j coupling (whereby single-electron orbital angular momentum and spin are first coupled to form a total angular momentum, j) prevails over Russell–Saunders coupling. Together with previous actinide complexation studies, our results highlight the need to continue studying the unusual behaviour of the actinide elements, especially those that are scarce and short-lived.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The E. coli L‐asparaginase V27T mutant: structural and functional characterization and comparison with theoretical predictions

Bacterial L‐asparaginases have been used for over 40 years as anticancer drugs. Ardalan et al. ( Medical Hypotheses 112, 7–17, 2018) proposed that the V27T mutant of Escherichia coli type II L‐asparaginase, EcAII(V27T), should display altered biophysical and catalytic properties compared to the wild‐type enzyme, EcAII(wt), rendering it more favourable as a pharmaceutical. They postulated that EcAII(V27T) would exhibit reduced glutaminolytic activity and be more stable compared to EcAII(wt). Their postulates, however, were purely theoretical. Here, we characterized experimentally selected properties of EcAII(V27T). We found asparaginolytic activity of this mutant unchanged, whereas its glutaminolytic activity was fourfold lower compared with EcAII(wt). We did not observe significant differences in stabilities of EcAII(wt) and EcAII(V27T). Crystal structures of the complexes with L‐Asp and L‐Glu showed considerable differences in binding modes of both substrates.

Biochemistry & Molecular Biology↗
NASA NTRS1983

Large space structures control algorithm characterization

Feedback control algorithms are developed for sensor/actuator pairs on large space systems. These algorithms have been sized in terms of (1) floating point operation (FLOP) demands; (2) storage for variables; and (3) input/output data flow. FLOP sizing (per control cycle) was done as a function of the number of control states and the number of sensor/actuator pairs. Storage for variables and I/O sizing was done for specific structure examples.

Fogel, E.↗
DOE OSTI2022

Structural and functional characterization of NEMO cleavage by SARS-CoV-2 3CLpro

Abstract In addition to its essential role in viral polyprotein processing, the SARS-CoV-2 3C-like protease (3CLpro) can cleave human immune signaling proteins, like NF-κB Essential Modulator (NEMO) and deregulate the host immune response. Here, in vitro assays show that SARS-CoV-2 3CLpro cleaves NEMO with fine-tuned efficiency. Analysis of the 2.50 Å resolution crystal structure of 3CLpro C145S bound to NEMO 226–234 reveals subsites that tolerate a range of viral and host substrates through main chain hydrogen bonds while also enforcing specificity using side chain hydrogen bonds and hydrophobic contacts. Machine learning- and physics-based computational methods predict that variation in key binding residues of 3CLpro-NEMO helps explain the high fitness of SARS-CoV-2 in humans. We posit that cleavage of NEMO is an important piece of information to be accounted for, in the pathology of COVID-19.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Structural and biochemical characterization of the exopolysaccharide deacetylase Agd3 required for Aspergillus fumigatus biofilm formation

The exopolysaccharide galactosaminogalactan (GAG) is an important virulence factor of the fungal pathogen Aspergillus fumigatus. Deletion of a gene encoding a putative deacetylase, Agd3, leads to defects in GAG deacetylation, biofilm formation, and virulence. Here, we show that Agd3 deacetylates GAG in a metal-dependent manner, and is the founding member of carbohydrate esterase family CE18. The active site is formed by four catalytic motifs that are essential for activity. The structure of Agd3 includes an elongated substrate-binding cleft formed by a carbohydrate binding module (CBM) that is the founding member of CBM family 87. Agd3 homologues are encoded in previously unidentified putative bacterial exopolysaccharide biosynthetic operons and in other fungal genomes.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS1991

Damping characterization in large structures

This research project has as its main goal the development of methods for selecting the damping characteristics of components of a large structure or multibody system, in such a way as to produce some desired system damping characteristics. The main need for such an analytical device is in the simulation of the dynamics of multibody systems consisting, at least partially, of flexible components. The reason for this need is that all existing simulation codes for multibody systems require component-by-component characterization of complex systems, whereas requirements (including damping) often appear at the overall system level. The main goal was met in large part by the development of a method that will in fact synthesize component damping matrices from a given system damping matrix. The restrictions to the method are that the desired system damping matrix must be diagonal (which is almost always the case) and that interbody connections must be by simple hinges. In addition to the technical outcome, this project contributed positively to the educational and research infrastructure of Tuskegee University - a Historically Black Institution.

Eke, Fidelis O.↗
DOE OSTI2025

Linking structure to performance: Characterization of porous transport layers for high-pressure water electrolysis

Proton exchange membrane (PEM) water electrolysis is a promising technology to produce cost-efficient hydrogen. PEM electrolyzers offer a large current density range and the ability to operate at differential pressure which can be used to minimize both capital and operational expenditures. However, directly producing pressurized hydrogen at the cathode results in pushing the membrane against the anode porous transport layer (PTL). This can lead to detrimental effects, such as membrane deformation or ruptures, which depend on membrane properties as well as PTL material properties such as pore size, structure, and morphology. In this work, a range of sinter and felt-based commercial PTLs are evaluated for their contributions to the cell's electrochemical and H 2 crossover performance at cathode pressures up to 30 bar. X-ray tomography and post-operando optical microscopy are used to assess the morphology of the PTLs, and the PTL induced deformation experienced by the catalyst coated membrane (CCM), respectively. PTL samples with lower porosity were found to reduce both the cell voltage and the amount of H 2 permeating from the cathode to the anode exhaust, which was ascribed to improved catalyst layer contact and reduced membrane deformation, respectively. The best performing PTLs improved electrolyzer efficiency by ~1.5 kWh/kg H2 . Specifically, 1 kWh/kg H2 was gained due to reducing membrane deformation and decreasing H 2 crossover. The remainder 0.5 kWh/kg H2 were achieved by improving the electrical contact at the electrode/PTL interface which decreased cell voltage.

08 HYDROGEN↗
DOE OSTI2026

Structural and spectroscopic characterization of a Tb(IV) polyoxometalate

There has been a renaissance in high valent lanthanide chemistry, which has resulted in the first examples of tetravalent praseodymium (Pr) and terbium (Tb) in molecular systems. These feats have been achieved with tailored ligands that facilitate tetravalent lanthanide stability in non-aqueous conditions. The next step in realizing the potential of high valent lanthanide chemistry is moving towards complexes that are stable in ambient and aqueous conditions. In this investigation, we advance this paradigm by obtaining definitive evidence of Tb(IV) in a molecular system under aqueous conditions utilizing the lacunary Wells-Dawson polyoxometalate, K 10 P 2 W 17 O 61 •20H 2 O. Herein we present the single crystal structure of K 16 Tb(IV)(P 2 W 17 O 61 ) 2 •39.85H 2 O (Tb(IV)W 34 ) as well as extensive spectroscopic evidence obtained via UV–Vis-NIR, X-ray absorption near edge spectroscopy, continuous wave X-band electron paramagnetic resonance spectroscopy and SQUID magnetometry measurements to confirm the oxidation state of Tb in W 34 complexes as +4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural and kinetic characterization of an acetoacetyl-Coenzyme A: acetate Coenzyme A transferase from the extreme thermophile Thermosipho melanesiensis

Family 1 Coenzyme A transferases (CtfAB) from the extremely thermophilic bacterium, Thermosipho melanesiensis, has been used for in vivo acetone production up to 70°C. This enzyme has tentatively been identified as the rate-limiting step, due to its relatively low-binding affinity for acetate. However, existing kinetic and mechanistic studies on this enzyme are insufficient to evaluate this hypothesis. Here, kinetic analysis of purified recombinant T. melanesiensis CtfAB showed that it has a ping-pong bi-bi mechanism typical of Coenzyme A (CoA) transferases with Km values for acetate and acetoacetyl-CoA of 85 mM and 135 μM, respectively. Product inhibition by acetyl-CoA was competitive with respect to acetoacetyl-CoA and non-competitive with respect to acetate. Crystal structures of wild-type and mutant T. melanesiensis CtfAB were solved in the presence of acetate and in the presence or absence of acetyl-CoA. These structures led to a proposed structural basis for the competitive and non-competitive inhibition of acetyl-CoA: acetate binds independently of acetyl-CoA in an apparent low-affinity binding pocket in CtfA that is directly adjacent to a catalytic glutamate in CtfB. Similar to other CoA transferases, acetyl-CoA is bound in an apparent high-affinity binding site in CtfB with most interactions occurring between the phospho-ADP of CoA and CtfB residues far from the acetate binding pocket. This structural-based mechanism also explains the organic acid promiscuity of CtfAB. High-affinity interactions are predominantly between the conserved phospho-ADP of CoA, and the variable organic acid binding site is a low-affinity binding site with few specific interactions.

Biochemistry & Molecular Biology↗
DOE OSTI2024

Mobility Selective Ion Soft-Landing and Characterization Enabled Using Structures for Lossless Ion Manipulation

In this study, while conventional ion-soft landing uses the mass-to-charge (m/z) ratio to achieve molecular selection for deposition, here we demonstrate the use of Structures for Lossless Ion Manipulation (SLIM) for mobility-based ion selection and deposition. The dynamic rerouting capabilities of SLIM were leveraged to enable the rerouting of a selected range of mobilities to a different SLIM path (rather than MS) that terminated at a deposition surface. A selected mobility range from a phosphazene ion mixture was rerouted and deposited with a current pulse (~150 pA) resembling its mobility peak. In addition, from a mixture of tetra-alkyl ammonium (TAA) ions containing chain lengths of C5–C8, selected chains (C6, C7) were collected on a surface, reconstituted into solution-phase, and subsequently analyzed with a SLIM-qToF to obtain an IMS/MS spectrum, confirming the identity of the selected species. Further, this method was used to characterize triply charged tungsten-polyoxometalate anions, PW 12 O 40 3– (WPOM). The arrival time distribution of the IMS/MS showed multiple peaks associated with the triply charged anion (PW 12 O 40 3– ), of which a selected ATD was deposited and imaged using TEM. Additionally, the identity of the deposited WPOM was ascertained using energy-dispersive (EDS) spectroscopy. Further, we present theory and computations that reveal ion landing energies, the ability to modulate the energies, and deposition spot sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structural and thermodynamic characterization of CuZr metallic glass nanoparticles: Insights from atomistic simulations

Metallic crystalline nanoparticles (NPs) have been shown to display intriguing size-dependent properties. However, the properties of metallic glass (MG) NPs remain largely unexplored. Here, using molecular dynamics simulations, we produce Cu 64 Zr 36 MG NPs ranging in size from 1 to 20 nm by cooling molten systems at a relatively slow rate of 10 9 K/s. Results indicate that NPs are coated with a Cu-rich layer with a thickness that increases with NP size. We employ various simulated rates of heating, from 10 11 to 10 13 K/s, to determine the melting points of these NPs. The results show a significant decrease in the solidus temperature for NPs smaller than 10 nm. Furthermore, as NP size decreases, the fraction of Cu full icosahedra within the NPs increases, suggesting that smaller NPs are stronger and harder. These findings provide insights for designing heterogeneous metallic nanoglass materials that leverage the size-dependent properties of MG NPs.

36 MATERIALS SCIENCE↗