Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “statistical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Application of statistical inversion to ground-based microwave remote sensing of temperature and water vapor profiles

Surface-based observations of downwelling microwave thermal emission are related to temperature and humidity profiles via a standard integral equation of radiative transfer. Both in clear and in cloudy atmospheres, statistical inversion techniques are used to retrieve profiles from a data vector of brightness observations and surface meteorological constraints. For the clear case, accuracy predictions and profile retrievals are illustrated for: (1) single frequency angular scanned data; (2) multi-frequency angular scanned data; and (3) multi-frequency zenith data. For the last case predicted and achieved accuracies were compared in a recently conducted radiometric experiment. Retrievals of cloud contaminated radiometric data are elaborated.

Westwater, E. R.↗
NASA NTRS1977

Systems for measuring response statistics of gigahertz bandwidth photomultipliers

New systems have been developed for measuring the average impulse response, the pulse-height spectrum, the transit-time statistics as a function of signal level, and the dark-count spectrum of gigahertz bandwidth photomultipliers. Measurements showed that the 0.53 microns pulse used as an optical test source had a 30 picoseconds and less than 70 ps pulse width. Calibration data showed the system resolution to be less than 20 ps for root mean square transit-time measurements. Test data for a static crossed-field photomultiplier showed 2-photoelectron resolution and less than 30-ps time jitter over the 1- to 100-photoelectron range.

Abshire, J. B.↗
NASA NTRS1977

Chain Pooling modeling selection as developed for the statistical analysis of a rotor burst protection experiment

As many as three iterated statistical model deletion procedures were considered for an experiment. Population model coefficients were chosen to simulate a saturated 2 to the 4th power experiment having an unfavorable distribution of parameter values. Using random number studies, three model selection strategies were developed, namely, (1) a strategy to be used in anticipation of large coefficients of variation, approximately 65 percent, (2) a strategy to be sued in anticipation of small coefficients of variation, 4 percent or less, and (3) a security regret strategy to be used in the absence of such prior knowledge.

Holms, A. G.↗
NASA NTRS1978

Statistical model for asperity-contact time fraction in elastohydrodynamic lubrication

Relations for the asperity contact time fraction during elastohydrodynamic (EHD) lubrication of a typical ball bearing are presented. The analysis is based on a two-dimensional random surface model, and actual profile traces of the bearing surfaces were used as statistical sample records. The results of the analysis show that transition from 90 percent contact to 1 percent contact occurs within a dimensionless film thickness range of approximately 4 to 5. This thickness ratio is several times larger than reported in the literature where one-dimensional random surface models were used.

Sidik, S. M.↗
NASA NTRS1978

The role of drop velocity in statistical spray description

The justification for describing a spray by treating drop velocity as a random variable on an equal statistical basis with drop size was studied experimentally. A double exposure technique using fluorescent drop photography was used to make size and velocity measurements at selected locations in a steady ethanol spray formed by a swirl atomizer. The size velocity data were categorized to construct bivariate spray density functions to describe the spray immediately after formation and during downstream propagation. Bimodal density functions were formed by environmental interaction during downstream propagation. Large differences were also found between spatial mass density and mass flux size distribution at the same location.

Groeneweg, J. F.↗
NASA NTRS1978

Simplified model of statistically stationary spacecraft rotation and associated induced gravity environments

A stochastic model of spacecraft motion was developed based on the assumption that the net torque vector due to crew activity and rocket thruster firings is a statistically stationary Gaussian vector process. The process had zero ensemble mean value, and the components of the torque vector were mutually stochastically independent. The linearized rigid-body equations of motion were used to derive the autospectral density functions of the components of the spacecraft rotation vector. The cross-spectral density functions of the components of the rotation vector vanish for all frequencies so that the components of rotation were mutually stochastically independent. The autospectral and cross-spectral density functions of the induced gravity environment imparted to scientific apparatus rigidly attached to the spacecraft were calculated from the rotation rate spectral density functions via linearized inertial frame to body-fixed principal axis frame transformation formulae. The induced gravity process was a Gaussian one with zero mean value. Transformation formulae were used to rotate the principal axis body-fixed frame to which the rotation rate and induced gravity vector were referred to a body-fixed frame in which the components of the induced gravity vector were stochastically independent. Rice's theory of exceedances was used to calculate expected exceedance rates of the components of the rotation and induced gravity vector processes.

Fichtl, G. H.↗
NASA NTRS1977

Rotor burst protection program: Statistics on aircraft gas turbine engine rotor failures that occurred in US commercial aviation during 1975

Statistics on gas turbine rotor failures that have occurred in U.S. commercial aviation during 1975 are presented. The compiled data were analyzed to establish: (1) The incidence of rotor failures and the number of contained and uncontained rotor bursts; (2) The distribution of rotor bursts with respect to engine rotor component; i.e., fan, compressor or turbine; (3) The type of rotor fragment (disk, rim or blade) typically generated at burst; (4) The cause of failure; (5) The type of engines involved; and (6) The flight condition at the time of failure.

Delucia, R. A.↗
NASA NTRS1977

Prediction of slant path rain attenuation statistics at various locations

The paper describes a method for predicting slant path attenuation statistics at arbitrary locations for variable frequencies and path elevation angles. The method involves the use of median reflectivity factor-height profiles measured with radar as well as the use of long-term point rain rate data and assumed or measured drop size distributions. The attenuation coefficient due to cloud liquid water in the presence of rain is also considered. Absolute probability fade distributions are compared for eight cases: Maryland (15 GHz), Texas (30 GHz), Slough, England (19 and 37 GHz), Fayetteville, North Carolina (13 and 18 GHz), and Cambridge, Massachusetts (13 and 18 GHz).

Goldhirsh, J.↗
NASA NTRS1978

A statistical, micromechanical theory of the compressive strength of brittle materials

A general theory of the compressive strength of brittle materials is presented. This theory proposes that failure is brought about by structural weakening from accumulated crack damage which increases with the stress level. The statistics of the flaw distribution and the mechanism of crack initiation and extension are important. A sample calculation using the theory is given to demonstrate its application

Adams, M.↗
NASA NTRS1978

A statistical technique for determining rainfall over land employing Nimbus-6 ESMR measurements

At 37 GHz, the frequency at which the Nimbus 6 Electrically Scanning Microwave Radiometer (ESMR 6) measures upwelling radiance, it was shown theoretically that the atmospheric scattering and the relative independence on electromagnetic polarization of the radiances emerging from hydrometers make it possible to monitor remotely active rainfall over land. In order to verify experimentally these theoretical findings and to develop an algorithm to monitor rainfall over land, the digitized ESMR 6 measurements were examined statistically. Horizontally and vertically polarized brightness temperature pairs (TH, TV) from ESMR 6 were sampled for areas of rainfall over land as determined from the rain recording stations and the WSR 57 radar, and areas of wet and dry ground (whose thermodynamic temperatures were greater than 5 C) over the Southeastern United States. These three categories of brightness temperatures were found to be significantly different in the sense that the chances that the mean vectors of any two populations coincided were less than 1 in 100.

Rodgers, E.↗
NASA NTRS1977

Statistical separability and classification of land use classes using image-100

The author has identified the following significant results. The statistical separability of land use classes in the subsets of one to four spectral channels was investigated. Using ground observations and aerial photography, the MSS data of LANDSAT were analyzed with the Image-100. In the subsets of one to three spectral channels, channel 4, channel 4 & 7, and channels 4, 5, & 7 were found to be the best choices (ch.4 - 0.5 to 0.6 microns, ch. 5 - 0.6 to 0.7 microns, ch. 6 - 0.7 to 0.8 microns, and ch. 7 - 0.8 to 1.1 microns). For the single cell option of the Image-100, the errors of omission varied from 5% for the industrial class to 46% for the institutional class. The errors of commission varied from 11% for the commercial class to 39% for the industrial class. On the whole, the sample classifier gave considerably more accurate results compared to the single cell or multicell option.

Dejesusparada, N.↗
NASA NTRS1977

Statistical analysis

A discussion is presented on the use of statistical analysis to develop a technique that will reliably predict the life of a battery.

Mains, D.↗
NASA NTRS1979

Statistical comparisons of aircraft flyover noise adjustment procedures for different weather conditions

Aircraft flyover noise spectra and effective perceived noise level (EPNL) values obtained under widely different weather conditions were adjusted according to a proposed national standard. The results were statistically compared with the same measured spectra adjusted according to an alternate procedure and with reference spectra and EPNL values obtained under almost ideal weather conditions. Three different ways to represent the weather condition through which the sound propagated were also evaluated.

Mueller, A. W.↗
NASA NTRS1979

Results of a statistical approach to rainfall estimation using Nimbus 5 6.7 micrometers and 11.5 micrometers THIR data

Nimbus 5 6.7 mm and 11.5 mm temperature humidity infrared radiometer (THIR) data were used in a simple multiple regression scheme to test the feasibility of using these data to estimate hourly rainfall. Throughout the test area (85 W to 105 W and 45 N to 30 N) subareas (8 deg x 6 deg) were chosen from which point to point and areal statistics were obtained. Four subsets of data were used. The first consisted of only those surface stations indicating precipitation whose latitude and longitude coincided with the THIR grid points. A second used surface stations 0.1 degree from the THIR grid points. The third was a combination of subsets one and two. A reciprocal distance weighting scheme was used to derive precipitation values in data sparse areas. A fourth subset was made using these data combined with the data from subsets one and two. Point estimates resulted in negative correlations between estimated and grid derived "surface" precipitation. One degree areal estimates showed a slight improvement with a correlation coefficient of approximately 0.11. Single regression areal estimates resulted in correlations of approximately 0.11 and 0.20 for the 6.7 mm and 11.5 mm data respectively. These poor results were attributed to problems which are inherent in the satellite data (location errors, short temporal span of data, wavelength of sensors, etc.) and the lack of sufficient surface data to better verify the satellite estimate.

Ormsby, J. P.↗
NASA NTRS1978

Dependence of geomagnetic activity on solar wind parameters - A statistical approach

A statistical analysis of a large body of data is used to give a visual representation of the relative influence of each solar wind/IMF parameter on geomagnetic activity. In addition an attempt is made to determine whether geomagnetic indices differ in their response to various solar wind/IMF parameters and to discuss the physical implications of these differences. It is recommended that ample care should be taken about what kind of geomagnetic index is to be used.

Maezawa, K.↗
NASA NTRS1978

Multispectral data acquisition and classification - Statistical models for system design

In this paper we relate the statistical processes that are involved in multispectral data acquisition and classification to a simple radiometric model of the earth surface and atmosphere. If generalized, these formulations could provide an analytical link between the steadily improving models of our environment and the performance characteristics of rapidly advancing device technology. This link is needed to bring system analysis tools to the task of optimizing remote sensing and (real-time) signal processing systems as a function of target and atmospheric properties, remote sensor spectral bands and system topology (e.g., image-plane processing), radiometric sensitivity and calibration accuracy, compensation for imaging conditions (e.g., atmospheric effects), and classification rates and errors.

Huck, F. O.↗
NASA NTRS1978

Statistical sampling analysis for stratospheric measurements from satellite missions

Earth orbiting satellite experiments can be designed to measure stratospheric constituents such as ozone by utilizing remote sensing techniques. Statistical analysis techniques, mission simulation and model development have been utilized to develop a method for analyzing various mission/sensor combinations. Existing and planned NASA satellite missions such as Nimbus-4 and G, and Stratospheric Aerosol and Gas Experiment-Application Explorer Mission (SAGE-AEM) have been analyzed to determine the ability of the missions to adequately sample the global field.

Drewry, J. W.↗