Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Model-scale sound propagation experiment

The results of a scale model propagation experiment to investigate grazing propagation above a finite impedance boundary are reported. In the experiment, a 20 x 25 ft ground plane was installed in an anechoic chamber. Propagation tests were performed over the plywood surface of the ground plane and with the ground plane covered with felt, styrofoam, and fiberboard. Tests were performed with discrete tones in the frequency range of 10 to 15 kHz. The acoustic source and microphones varied in height above the test surface from flush to 6 in. Microphones were located in a linear array up to 18 ft from the source. A preliminary experiment using the same ground plane, but only testing the plywood and felt surfaces was performed. The results of this first experiment were encouraging, but data variability and repeatability were poor, particularly, for the felt surface, making comparisons with theoretical predictions difficult. In the main experiment the sound source, microphones, microphone positioning, data acquisition, quality of the anechoic chamber, and environmental control of the anechoic chamber were improved. High-quality, repeatable acoustic data were measured in the main experiment for all four test surfaces. Comparisons with predictions are good, but limited by uncertainties of the impedance values of the test surfaces.

Willshire, William L., Jr.↗
NASA NTRS1988

A study of C3HD in cold interstellar clouds

The 1(10)-1(01) transition of C3HD was detected at 19.418 GHz at twelve positions in cold, dark clouds, and the D hyperfine components were resolved in two sources (L1498 and TMC-1C) well enough to derive values for the D quadrupole coupling constants. Simultaneous observations of C3H2 in each source yield relative integrated line intensities in the range 0.10-0.18, from which relative C3HD/C3H2 abundances in the range 0.05-0.15 were derived. These are among the highest deuteration ratios yet observed. Within the limits of the observational and modeling uncertainties, it is possible to explain the derived C3HD/C3H2 ratios by ion-molecule chemistry if e is equal to about 3 x 10 to the -7th.

Bell, M. B.↗
NASA NTRS1989

Intelligent multi-sensor integrations

Growth in the intelligence of space systems requires the use and integration of data from multiple sensors. Generic tools are being developed for extracting and integrating information obtained from multiple sources. The full spectrum is addressed for issues ranging from data acquisition, to characterization of sensor data, to adaptive systems for utilizing the data. In particular, there are three major aspects to the project, multisensor processing, an adaptive approach to object recognition, and distributed sensor system integration.

Volz, Richard A.↗
NASA NTRS1989

Evolution of radio quasars for z of less than 2

A sample of 72 radio quasars is used to study the cosmic and individual evolution of quasars in the 1-2 redshift range. It is shown that the most luminous sources at all redshifts are unresolved, and that one-sided and two-sided structures correspond to progressively lower core (and total) luminosities. The sizes and fractional population of triple sources are found to fall steadily with increasing redshift to z of about 1.7. A correlation over many orders of magnitude is noted between the optical and maximum radio-core luminosity.

Neff, S. G.↗
NASA NTRS1990

Measuring Irradiance Over Large Areas

Relatively simple experimental technique yields data processed, via straightforward mathematical model, into map of thermal irradiance over large area. Imaging infrared radiometer makes temperature map of sheet. Irradiance distribution at sheet location then deduced from temperature map. Used to obtain rapid measurements of incident-flux distribution over broad spectral range at specific locations relative to such heat sources as infrared heat lamps or lasers.

Glazer, Stuart D.↗
NASA NTRS1992

On the Galactic disk and halo models of gamma-ray bursts

Statistical properties of the distribution of gamma-ray bursts are calculated for a large range of different luminosity functions assumed for the sources. Surprisingly, the observable parameters are almost the same as in the 'standard-candle' scenario. In particular, no way is found to reconcile the observed distribution of gamma-ray bursts with any Galactic disk model. A Galactic halo distribution must have a core radius greater than 18 kpc to have no measurable dipole anisotropy. A cosmological distribution of the bursters is a more reasonable alternative.

Mao, Shude↗
NASA NTRS1992

Inferences Concerning the Magnetospheric Source Region for Auroral Breakup

It is argued that the magnetospheric source region for auroral arc breakup and substorm initiation is along boundary plasma sheet (BPS) magnetic field lines. This source region lies beyond a distinct central plasma sheet (CPS) region and sufficiently far from the Earth that energetic ion motion violates the guiding center approximation (i.e., is chaotic). The source region is not constrained to any particular range of distances from the Earth, and substorm initiation may be possible over a wide range of distances from near synchronous orbit to the distant tail. It is also argued that the layer of low-energy electrons and velocity dispersed ion beams observed at low altitudes on Aureol 3 is not a different region from the region of auroral arcs. Both comprise the BPS. The two regions occasionally appear distinct at low altitudes because of the effects of arc field-aligned potential drops on precipitating particles.

Lyons, L. R.↗
NASA NTRS1990

Far and extreme ultraviolet astronomy with ORFEUS

ORFEUS (Orbiting and Retrievable Far and Extreme Ultraviolet Spectrometer) is a 1 m normal incidence telescope for spectroscopic investigations of cosmic sources in the far and extreme ultraviolet spectral range. The instrument will be integrated into the freeflyer platform ASTRO-SPAS. ORFEUS-SPAS is scheduled with STS ENDEAVOUR in September 1992. We describe the telescope with its two spectrometer and their capabilities i.e., spectral range, resolution and overall sensitivity. The main classes of objects to be observed with the instrument are discussed and two examples of simulated spectra for the white dwarf HZ43 and an O9-star in LMC are shown.

Kraemer, G.↗
NASA NTRS1993

X-ray timing explorer mission

The XTE will address a number of fundamental questions about the nature of the cosmos. The large effective area (about 0.8 sq m total) and broad band of sensitivity (2-200 keV) of its three instruments make it especially valuable for timing of intensity variations and for the determination of broadband spectra from high-energy sources. For the first time, studies of variability ranging from about 1 microsecond to several years will be carried out. XTE's design and flexibility of operations will allow it to respond rapidly to changes in the X-ray sky (within hours) and will facilitate multifrequency observations. It is scheduled for launch on a Delta II vehicle prior to April 1996.

Bradt, H. V.↗
NASA NTRS1993

Calibration of the AVHRR visible and near-IR bands by atmospheric scattering, ocean glint and desert reflection

A method for calibrating satellite sensors (such as the AVHRR visible and NIR bands) is proposed by which the sensors are calibrated using well-known physical characteristics of the atmosphere, ocean, and deserts, as well as the digital satellite imagery. The approach, independent of ground support, used the following three phenomena: molecular scattering over the ocean for absolute visible band calibration; ocean glint, to transfer the calibration from the visible band to the NIR band; and desert reflectance to monitor, independently, the stability of the visible and NIR bands. The method was applied to NOAA-7, -9, and -11 sensors. The results of the ocean and the desert calibration methods were found to differ in the brightness range and the spectral response of the radiance source (molecular scattering over the ocean versus the desert reflectance).

Kaufman, Y. J.↗
NASA NTRS1932

The compressive strength of duralumin columns of equal angle section

This report presents a chart giving the compressive strength of duralumin columns of equal angle section. The data used in the construction of the chart were obtained from various published sources and were correlated with theory in the range where secondary failure occurred. Appendices are included giving excerpts from Army and Navy specifications for duralumin and approximate formulas for the properties of the equal angle section.

Lundquist, Eugene E↗
NASA NTRS1993

Models of Neptune's smooth recurrent radio emission

The quantitative response of the Planetary Radio Astronomy (PRA) instrument to a wave with polarization ellipse of arbitrary shape and orientation, arriving at the antennas from any direction, can be determined. This capability is used to model the time variation of intensity and circular polarization over a range of radio frequencies for proposed radio-source locations and emission characteristics at Neptune. At frequencies below 400 kHz the observed variation of intensity, polarization, and phase are closely simulated in an offset tilted dipole magnetic field by conjugate sources at midlatitude with filled emission cones. The phase of emission at higher frequencies is reproduced by sources at lower latitude. Modeled wide-cone emission does not reach the spacecraft at the observed phase nor have the polarization sense observed before closest approach. Source-surface maps of apparent polarization for the period before closest approach when instrumental response is especially sensitive to source location is presented. The method is capable of extension to more realistic models of the magnetic field.

Sawyer, Constance↗
NASA NTRS1993

Proton irradiation on materials

A computer code is developed by utilizing a radiation transport code developed at NASA Langley Research Center to study the proton radiation effects on materials which have potential application in NASA's future space missions. The code covers the proton energy from 0.01 Mev to 100 Gev and is sufficient for energetic protons encountered in both low earth and geosynchronous orbits. With some modification, the code can be extended for particles heavier than proton as the radiation source. The code is capable of calculating the range, stopping power, exit energy, energy deposition coefficients, dose, and cumulative dose along the path of the proton in a target material. The target material can be any combination of the elements with atomic number ranging from 1 to 92, or any compound with known chemical composition. The generated cross section for a material is stored and is reused in future to save computer time. This information can be utilized to calculate the proton dose a material would receive in an orbit when the radiation environment is known. It can also be used to determine, in the laboratory, the parameters such as beam current of proton and irradiation time to attain the desired dosage for accelerated ground testing of any material. It is hoped that the present work be extended to include polymeric and composite materials which are prime candidates for use as coating, electronic components, and structure building. It is also desirable to determine, for ground testing these materials, the laboratory parameters in order to simulate the dose they would receive in space environments. A sample print-out for water subject to 1.5 Mev proton is included as a reference.

Chang, C. Ken↗
NASA NTRS1993

A gimbaled low noise momentum wheel

The bus actuators are the heart and at the same time the Achilles' heel of accurate spacecraft stabilization systems, because both their performance and their perturbations can have a deciding influence on the achievable pointing accuracy of the mission. The main task of the attitude actuators, which are mostly wheels, is the generation of useful torques with sufficiently high bandwidth, resolution and accuracy. This is because the bandwidth of the whole attitude control loop and its disturbance rejection capability is dependent upon these factors. These useful torques shall be provided, without - as far as possible - parasitic noise like unbalance forces and torques and harmonics. This is because such variable frequency perturbations excite structural resonances which in turn disturb the operation of sensors and scientific instruments. High accuracy spacecraft will further require bus actuators for the three linear degrees of freedom (DOF) to damp structural oscillations excited by various sources. These actuators have to cover the dynamic range of these disturbances. Another interesting feature, which is not necessarily related to low noise performance, is a gimballing capability which enables, in a certain angular range, a three axis attitude control with only one wheel. The herein presented Teldix MWX, a five degree of freedom Magnetic Bearing Momentum Wheel, incorporates all the above required features. It is ideally suited to support, as a gyroscopic actuator in the attitude control system, all High Pointing Accuracy and Vibration Sensitive space missions.

Bichler, U.↗
NASA NTRS1994

The origin and role of dust in the early solar system

Dust was the primary building material of the solar nebula planetesimals that accumulated to form minor planets, solid planets, and the cores of giant planets. Collected interplanetary dust particle (IDP) samples probably contain preserved samples of nebular dust that formed over a wide range of radial distance. There are two general source regions of IDP's, the asteroid belt and the short-period comets. The collected asteroid particles are likely to be rather representative samples of material that accreted into planetesimals in the 2.2 to 3.3 AU region. The comet samples are likely to be representative samples of grains that accreted in the Kuiper belt region between 20 AU and some hundreds of AU. Many of the solar system effects on grains should have been more pronounced or even restricted to the less than 5 AU region where the asteroids were formed. A major goal of IDP research is to try to identify typical asteroidal and cometary IDP's and to study their properties. If successful this will provide fundamental insight into both the initial solids in the solar nebula and materials modified by a variety of important nebular processes.

Brownlee, Don E.↗
NASA NTRS1994

Laboratory simulation of Low Earth Orbit (LEO) atomic oxygen effects

A pulsed fast oxygen atom source has been used extensively over the last 7 years to investigate the effects of ambient oxygen atoms impacting materials placed in low Earth orbit. In this period, we irradiated well over 2000 material samples with 8 km/s oxygen atoms generated in our source. Typical irradiance level is 3 x 10(exp 20) O atoms/sq cm although some materials have been irradiated to fluence levels as high as 6 x 10(exp 21) O atoms/sq cm. The operating principles and characteristics of our source are reviewed along with diagnostic and handling procedures appropriate to material testing. Representative data is presented on the velocity dependence of oxygen atom erosion rates (the PSI source provides oxygen atoms tunable over the velocity range of 5 to 12 km/s) as well as the dependence on material temperature. Specific examples of non-linear oxidative effects related to surface contamination and test duration are also be provided.

Caledonia, George E.↗
NASA NTRS1994

Strategy for selecting Mars Pathfinder landing sites

A strategy for Pathfinder site selection must be developed that is fundamentally different from most previous considerations. At least two approaches can be identified. In one approach, the objective is to select a site representing a key geologic unit on Mars, i.e., a unit that is widespread, easily recognized, and used frequently as a datum in various investigations. The second approach is to select a site that potentially affords access to a wide variety of rock types. Because rover range is limited, rocks from a variety of sources must be assembled in a small area for sampling. Regardless of the approach taken in site selection, the Pathfinder site should include eolian deposits and provisions should be made to obtain measurements on soils. A recommended approach for selecting the Mars Pathfinder landing site is to identify a deltaic deposit, composed of sediments derived from sources of various ages and geologic units that shows evidence of eolian activity. The site should be located as close as possible to the part of the outwash where rapid deposition occurred because the likelihood of 'sorting' by size and composition increases with distance, decreasing the probability of heterogeneity. In addition, it is recommended that field operation tests be conducted to gain experience and insight into conducting science with Pathfinder.

Greeley, Ronald↗
NASA NTRS1992

Inferences concerning the magnetospheric source region for auroral breakup

Inferences concerning the magnetospheric source region for auroral arcs obtained from particle measurements on polar orbiting satellites are presented and contrasted with other ideas. An argument that the magnetospheric source region for auroral arc breakup and substorm initiation is along Boundary Plasma Sheet (BPS) magnetic field lines is given. This source region lies beyond a distinct central plasma sheet region and sufficiently far from the Earth that energetic ion motion violates the guiding center approximation (is chaotic). The source region is not constrained to any particular range of distances from the Earth, and substorm initiation may be possible over a wide range of distances from near synchronous orbit to the distant tail. It is also argued that the layer of low energy electrons and velocity dispersed ion beams observed at low altitudes on Aureol 3 is not a different region from the region of auroral arcs. Both comprise the BPS. The two regions occasionally appear distinct at low altitudes because of the effects of arc field aligned potential drops on precipitating particles.

Lyons, L. R.↗