SEARCH · Engineering Papers

Results for “source location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Acoustic measurements of gas density

Sound transmission through gases in an enclosure is considered. Analytical results are given in terms of geometrical parameters, wave numbers, and source type for simple model problems, and are compared with data obtained by Haran (1983). It is concluded that density measurements can be made in a gas contained in an enclosure by measuring the sound pressure level at a receiver located near a dipole source driven at a constant velocity amplitude at low frequencies.

Shakkottai, P.↗

NASA NTRS2011

Sky and Elemental Planetary Mapping Via Gamma Ray Emissions

Low-energy gamma ray emissions ((is) approximately 30keV to (is) approximately 30MeV) are significant to astrophysics because many interesting objects emit their primary energy in this regime. As such, there has been increasing demand for a complete map of the gamma ray sky, but many experiments to do so have encountered obstacles. Using an innovative method of applying the Radon Transform to data from BATSE (the Burst And Transient Source Experiment) on NASA's CGRO (Compton Gamma-Ray Observatory) mission, we have circumvented many of these issues and successfully localized many known sources to 0.5 - 1 deg accuracy. Our method, which is based on a simple 2-dimensional planar back-projection approximation of the inverse Radon transform (familiar from medical CAT-scan technology), can thus be used to image the entire sky and locate new gamma ray sources, specifically in energy bands between 200keV and 2MeV which have not been well surveyed to date. Samples of these results will be presented. This same technique can also be applied to elemental planetary surface mapping via gamma ray spectroscopy. Due to our method's simplicity and power, it could potentially improve a current map's resolution by a significant factor.

BATSE (the Burst and Transient Source Experiment)↗

NASA NTRS1981

Unsteady environments and responses of the shuttle combined loads orbiter test

Both separate and combined wind tunnel and vibration shaker tests were conducted on two structural panels representative of the Shuttle orbiter in the NASA LaRC 8-foot transonic pressure tunnel (TPT) to determine the effects of combined loads on the thermal protection system (TPS). The primary objective of this test was to provide a combined full-scale load environment and realistic time history of the dynamic pressures, Mach numbers (through transonic), and dynamic structural responses of these panels. The panels were selected from orbiter locations where interactive load sources such as aerodynamic shock waves, turbulent boundary layers, strut-induced vorticity, and substrate deformation combined to provide high bonding loads between the TPS and the orbiter structure. The test panels for this program were highly instrumented with static and dynamic pressure gages, accelerometers, deflectometers, strain gages, Schileren and high-speed photography, and special instrumentation necessary to determine TPS/structure interface loads and tile motions. Two test specimens of each orbiter panel were utilized. Both were high-fidelity representations of the selected orbiter location. The first panel (calibration panel) for each test was utilized to calibrate the tunnel and shaker system as well as provide a data-gathering source for applied static and dynamic loads. The second panel (test panel) for each test was subjected to flight time exposures only so that TPS characteristics as a function of flight mission exposure could be determined. These tests were the last in a series that was suce6ssfully completed and necessary to certify the TPS prior to the first launching of the Shuttle.

P. H. Schuetz↗

NASA NTRS1997

Magnetospheric Plasmas-Flow and Energization of the Ionospheric Source

In a paper of more than a decade ago, estimated the strength of the ionospheric source and its ability to supply the different plasma regions of the Earth's magnetosphere. The launch of the POLAR spacecraft with the Thermal Ion Dynamics Experiment (TIDE) and the active control of spacecraft potential thro6gh the Plasma Source Instrument (PSI) made possible for the first time the direct measurement of low energy ions moving from the ionosphere into the lobes of the magnetotail. A particle trajectory model has been used to trace particles representative 6f TIDE measurements, taken during the operation of PSI, back to the location of the ionospheric source and forward to the entry point of the ions to the plasma sheet.

Chappell, C. R.↗

NASA NTRS1978

The scanning modulation collimator experiment on the HEAO-1

The purpose of this experiment is to localize celestial sources of X-rays to a precision of 5 to 20 arcsec, so that they may be identified with optical or radio counterparts. We also study their angular size and structure, to elucidate the X-ray emission mechanism. Four grids, wound with nickel alloy wires, are aligned to produce a modulated X-ray signal when the spacecraft rotation carries the collimator field of view across an X-ray source. An image dissector star camera and rate integrating gyroscopes are used to deduce the celestial position from which a peak X-ray signal arises. On-orbit performance and thermal stability have been very good. Based on the first six weeks of quick look data, we have the following results: the location of an X-ray burst source within a globular cluster; the location of 4U1608-52, a unique object which shows bursting, transient, and steady X-ray behavior and is also an optical source; the location of the X-ray transient H1705-25, which provided Anglo-Australian astronomers the basis for an optical identification with a nova-like object; the location of the X-ray transient H1743-32 in the galactic center; and a precise measurement of the angular extent of the Crab Nebula.

Schwartz, D. A.↗

NASA NTRSDate not supplied

Evaluation of Acoustic Propagation in Layered Media Using Wave Confinement

A comprehensive method for propagation of sound in layered media is discussed that involves dividing the domain into two regions, source field and far field. The source field is provided using experimentally collected data from full-scale rotorcraft acoustic flight tests, which consists of short waveforms that cannot be directly simulated on the grid without numerical errors. Instead, grid based computational waves are used to carry the details of these waveforms, including amplitude, arrival time and location of origin on source sphere. This is done by solving the scalar wave equation using the Wave Confinement (WC) method, which involves adding an extra term to produce converged solutions. WC is used to study wave propagation in two different atmospheric conditions, and the results are compared to the flight test data. Overall, WC can accurately capture the propagation effects and there is a good agreement with the flight test data.

rotorcraft acoustics↗

NASA NTRSDate not supplied

Evaluation of Acoustic Propagation in Layered Media Using Wave Confinement

rotorcraft acoustics↗

NASA NTRS2000

Meteorological Characterization of Global Dust Sources

The global distribution of absorbing aerosols index (AI) derived from Nimbus 7 Total Ozone Mapping Spectrometer (TOMS) measurements has been used to identify the major sources of atmospheric dust particles [Prospero, et al., 2000]. In this presentation, we will show that the TOMS aerosol index can also be used to the meteorological characterization of the source areas. We found a huge "dust belt" with a strong correlation between the TOMS index and the sea-level pressure wrapping all the major dust sources. To handle the difficulty of using quantitatively the TOMS Al and its strong dependency on the aerosol layer altitude, the Al has been correlated to the planetary boundary layer depth (PBL) and the surface wind speed. The strongest correlation is obtained with the product of these two variables and at the precise location of the dust sources identified by Prospero et al. The relation between the TOMS Al and the product of the PBL height and the surface wind speed has been used to study the interannual variability of the North-Africa dust sources in relation with the North Atlantic Oscillation (NAO). Finally, we will show that even on a short time base the variability of the TOMS Al can be related to the surface wind speed and PBL height.

Ginoux, Paul↗

NASA NTRS1981

Ionospsheric observation of enhanced convection-initiated gravity waves during tornadic storms

Atmospheric gravity waves associated with tornadoes, with locally severe storms occuring with tornadoes, and with hurricanes were studied through the coupling between the ionosphere and the troposphere. Reverse group ray tracing computations of gravity waves observed by an ionospheric Doppler sounder array were analyzed. The results of ray tracing computations and comparisons between the computed location of the wave sources and with conventional meteorological data indicate that the computed sources of the waves were near the touchdown of the tornadoes, near the eye of the hurricanes, and directly on the squall line of the severe thunderstorms. The signals excited occurred one hour in advance of the tornadoes and three hours in advance of the hurricanes. Satellite photographs show convective overshooting turrets occurring at the same locations and times the gravity waves were being excited. It is suggested that gravity wave observations, conventional meteorological data, and satellite photographs be combined to develop a remote sensing technique for detecting severe storms.

Hung, R. J.↗

NASA NTRS1973

Lava flows in Mare Imbrium - Geologic evaluation from Apollo orbital photography

A study of Apollo photographs indicates that all Eratosthenian age mare deposits in the Imbrium basin consist of extensive lava flows from a single eruptive source region bounded by 18 to 23 N and 28 to 32 W in the south-southwest corner of the basin. It is suggested that three major eruptive periods occurred between 3.0 plus or minus 0.4 and 2.5 plus or minus 0.3 b.y. Lavas assigned to these three phases extended for 1200, 600, and 400 km, respectively, over slopes approaching 1:1000. These materials cover an area of 200,000 sq km and have a volume of perhaps 40,000 cu km. The vent source of the youngest lava phase appears to be a 20 km long, structurally controlled fissure at 22 deg 50 min N and 31 deg 20 min W. The flow heights and lengths are consistent with the lunar gravity and imply extremely high rates of lava extrusion with low viscosity of the basalt melt playing a secondary role. The location of the volcanic source region on the intersection of major ring faults from two large basins suggests a basin structural control.

Schaber, G. G.↗

NASA NTRS1982

Magnetic structure of a flaring region producing impulsive microwave and hard X-ray bursts

Using VLA observations of the 1B/M1 flare of June 25, 1980, 6-cm 'snapshot' maps are synthesized. The spatial and temporal resolutions during the 9 minutes of the impulsive phase were, respectively, 1 arcsec x 2 arcsec and 10 s. Some displacement is noted between the locations of the burst source and the preflare loop structures seen in the preflare map. The burst peak occurred on the neutral line of the preflare polarization map, between the two oppositely polarized microwave 'loop' structures approximately 40 arcsec long. Concurrent hard X-ray observations were made of the burst, although these had no spatial resolution. The 6-cm maps show the locations of a number of the X-ray burst spikes. The 6-cm burst was fully resolved into at least eight components, many of which were bipolar.

Kundu, M. R.↗

NASA NTRS1997

Magnetospheric Plasmas: A Direct Measurement of the Ionospheric Source

In a paper of more than a decade ago, the estimated the strength of the ionospheric source and its ability to supply the different plasma regions of the Earth's magnetosphere was reported. The launch of the POLAR spacecraft with the Thermal Ion Dynamics Experiment (TIDE) and the active control of spacecraft potential made possible for the first time the direct measurement of low energy ions moving from the ionosphere into the lobes of the magnetotail. This paper presents data taken during the period of operation of the Plasma Source Instrument (PSI) which maintains the spacecraft potential at about 1.8V positive with respect to the ambient plasma. These data give an in-situ observation of the strength and flow direction of the ionospheric plasmas as it moves outward into the lobes of the tail. A particle trajectory model has been used to trace particles back to the location of the ionospheric source and forward to the entry point of the ions to the plasma sheet. A comparison of measured data with the predictions of the earlier modeling effort will be discussed.

Giles, B. L.↗

NASA NTRS2001

Background Maritime Aerosol: Their Optical Thickness and Scattering Properties

The effect of human induced change in the aerosol concentration and properties, or the aerosol response to climate change (e.g. droughts producing fires or dust) should be measured relative to a "background aerosol". How to define this background aerosol, so that it is both measurable and useful? Here we use 10 stations located in the Pacific, Atlantic and Indian Oceans to answer this question. Using a data set of the spectral optical thickness measured by the Aerosol Robotic network (AERONET), extending 1-3 years, we find the background conditions for these stations. The oceanic background aerosol is the result of ocean emission and spray, and some residual long lived continental aerosol. Its source is very broadly spread and is expected to vary little in time. Pollution or dust sources are from specific locations, emitted and transported to the measuring site in specific combination of meteorological conditions. Therefore they are expected to vary with time. It follows that the background aerosol can be identified as the median for conditions with small variations. To define the background we compute the median of N consequent measurements. We use N=50 that in average cloudy conditions corresponds to 2-3 days of measurements and N=100 (4-5 days). Most high polluted or dusty conditions correspond to data sequences with high standard deviation (greater than 0.02 in optical thickness) and are excluded. From the remaining N point running medians with low standard deviations we derive again the median. This excludes those rare cases of pollution or dust that is stable during the N measurements. The results show that the background aerosol over the Pacific Ocean is characterize by optical thickness of 0.055 at 500 nm and Angstrom exponent of 0.74. Over the Atlantic Ocean the values are 0.070 and 1.1 respectively, with little influence of the assumed value of N (50 or 100). The derivation of the background uses 20,000 and 5000 medians respectively that passed the criteria. The contribution of coarse and fine aerosol to the background aerosol is also calculated.

Kaufman, Yoram J.↗

NASA NTRS1984

The asteroidal source region of ordinary chondrites

The final, Earth-impacting orbits of ordinary chondritic meteorites have a very special distribution. By use of visual radiant and time of fall data, as well as photographic fireball orbits (1) it is inferred that chondrite perihelia are concentrated near 1 A.U., eccentricities are usually rather high (approximately 0.5), and inclinations are low (approximately 10 deg). Velocity selection resulting from atmospheric ablation plays a significant role in determining this orbital distribution, but by no means suffices to explain it. The observed distribution is a fragile one, and can easily be destroyed by Earth and Venus perturbations. This places severe constraints on the location of the original source bodies, of which these meteorites are fragments. New calculations were made of the expected distribution of final orbits from a range of initial sources, taking into consideration close encounter planetary perturbations, secular resonance, destruction by collision in space, and atmospheric ablation.

Wetherill, G. W.↗

NASA NTRS1994

Plasma and radio waves from Neptune: Source mechanisms and propagation

This report summarizes results obtained through the support of NASA Grant NAGW-2412. The objective of this project is to conduct a comprehensive investigation of the radio wave emission observed by the planetary radio astronomy (PRA) instrument on board Voyager 2 as if flew by Neptune. This study has included data analysis, theoretical and numerical calculations, ray tracing, and modeling to determine the possible source mechanism(s) and locations of the Neptune radio emissions. We have completed four papers, which are included in the appendix. The paper 'Modeling of Whistler Ray Paths in the Magnetosphere of Neptune' investigated the propagation and dispersion of lighting-generated whistler in the magnetosphere of Neptune by using three dimensional ray tracing. The two papers 'Numerical Simulations of Bursty Radio Emissions from Planetary Magnetospheres' and 'Numerical Simulations of Bursty Planetary Radio Emissions' employed numerical simulations to investigate an alternate source mechanism of bursty radio emissions in addition to the cyclotron maser instability. We have also studied the possible generation of Z and whistler mode waves by the temperature anisotropic beam instability and the result was published in 'Electron Cyclotron Wave Generation by Relativistic Electrons.' Besides the aforementioned studies, we have also collaborated with members of the PRA team to investigate various aspects of the radio wave data. Two papers have been submitted for publication and the abstracts of these papers are also listed in the appendix.

Wong, H. K.↗

NASA NTRS2006

Nondestructive Evaluation of Foam Insulation on the Space Shuttle External Tank

Foam loss on the External Tank (ET) during launch can be caused by a number of factors. Voids are the best understood mechanism of foam loss, although it is known that delaminations, cracks and crushed foam can also lead to liberation of foam. Shortly after the Columbia accident, work began on non-destructive evaluation of foam targeted at finding voids and delaminations. After several months of searching for candidate methods capable of inspecting ET foam, the five most promising techniques were taken through a blind test and narrowed down to two methods to develop and use for inspection of the ET. These methods were backscatter radiography and terahertz imaging. The backscatter radiography system measures a test part by detecting Compton backscattered x-ray energy generated by a collimated beam of x-rays directed at the test subject. This collimated beam is scanned across the subject, recording scatter intensity data one pixel at a time until the area of interest is covered. The resulting data can be used to generate an image similar to a radiograph. Some depth information can be gathered utilizing apertures or collimation on the detectors. The detectors are located around the collimated source, making this a single sided inspection. The void detection limit with the currently utilized system is around 0.5 inches in diameter by 0.2 inches high. The terahertz imaging system inspects a test part by utilizing a transceiver to emit a pulse focused at the aluminum skin of the ET, which reflects it back to the transceiver where it is analyzed. The transceiver is scanned across the area of interest until a measurement has been taken at every location. Amplitude, time delay and frequency content are examined to note any discontinuities which may be the result of a void or other type of defect. The pulse currently utilized is in the millimeter wave regime. The void detection limit with this system is around 0.5 inches in diameter by 0.2 inches high. With increased interest in other causes of foam loss following the flight of Discovery in July 2005, laser shearography was added to the techniques used for inspecting ET foam. The shearography method records a sheared image of a laser speckle pattern projected on a test part before And after some sort of excitation. The resultant fringe pattern allows the slope of the out of plane displacement to be measured. For crushed and delaminated foam applications, a non-contact air coupled acoustic force is used to excite the surface of the foam. Regions without defects tend to respond differently to the sound energy than do regions with defects, generating a map of the foam integrity. Foam crushed to a depth of about 0.1 inches is detectable with shearography even after it has relaxed to its original shape.

Richter, Joel↗

NASA NTRS1981

X-ray sources in globular clusters

The Einstein X-ray Observatory globular cluster observation program has completed a survey of 30 clusters, using the HRI detector. Preliminary results are reported for a more sensitive survey being conducted with the imaging proportional counter (IPC) of the satellite, which has found four possible new sources in the first 32 clusters observed. Also described are detailed studies of several luminous, globular cluster sources, including the X-ray burst from Terzan 2, and an effort is made to locate the X-ray sources with respect to cluster centers. Sources of systematic error, required optical studies of globular cluster structure, and the implications of the plausible binary systems for cluster core evolution are discussed.

Grindlay, J. E.↗

NASA NTRS1983

Acceleration and confinement of energetic particles in the 1980 June 7 solar flare

Pulsations with large amplitude and duration have been observed during the hard X-ray and microwave radio bursts associated with the 1980 June 7 solar flare. The high time resolution measurements of 20-800 keV X-rays were made with the X-ray spectrometers aboard the ISEE 3 and P78-1 spacecraft. The radio measurements, covering metric to microwave wavelengths, were made at the Nobeyama and Toyokawa observatories in Japan. The temporal evolution of the X-ray and radio spectra and the polarization and spatial structure of the microwave source have been examined. The following interpretation is found to be consistent with the observations: (1) the variations in the electron acceleration/injection spectrum are responsible for the observed variations in the hard X-ray and microwave emissions; (2) the locations of the hard X-ray and microwave sources are probably different, the X-ray source being located at a lower altitude.

Kane, S. R.↗