Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Crystal chemistry and optical investigations of the Cu{sub 2}Zn(Sn,Si)S{sub 4} series for photovoltaic applications

Different compounds in the Cu{sub 2}ZnSnS{sub 4}–Cu{sub 2}ZnSiS{sub 4} system have been prepared via ceramic route and structurally characterized via X-ray diffraction on powders and single crystals. Two solid solutions were identified along the Cu{sub 2}Zn(Sn,Si)S{sub 4} series. Namely, materials with Si-content x=Si/(Sn+Si) lower than 0.5 crystallize with the Cu{sub 2}ZnSnS{sub 4} kesterite structure type while materials with x higher than 0.8 adopt the Cu{sub 2}ZnSiS{sub 4} enargite structure type. In between, a miscibility gap occurs where the Cu{sub 2}ZnSn{sub 0.5}Si{sub 0.5}S{sub 4} and Cu{sub 2}ZnSn{sub 0.2}Si{sub 0.8}S{sub 4} compounds co-exist. The optical bandgap increases continuously with the Si content in the whole series. This opens up the possibility to fine tune the absorption threshold and to adjust it to 1.7 eV for x∼0.5, the optimum value for the top cell of tandem solar devises to achieve high photovoltaic conversion efficiency. - Graphical abstract: Two solid solutions have been pointed out in the Cu{sub 2}Zn(Sn{sub 1−x}Si{sub x})S{sub 4} series with the kesterite and the enargite type structures. - Highlights: • New compounds in Cu{sub 2}Zn(Sn,Si)S{sub 4} series have been prepared. • Two solid solutions Cu{sub 2}ZnSn{sub 1−x}Si{sub x}S{sub 4} were identified for x≤0.5 and x≥0.8. • In the miscibility gap 2 phases co-exist with kesterite and enargite structure types. • The optical bandgap increases continuously with the Si-content in the whole series. • These materials could be envisioned as absorber in thin-film solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio study of mechanical and thermal properties of GeTe-based and PbSe-based high-entropy chalcogenides

GeTe-based and PbSe-based high-entropy compounds have outstanding thermoelectric (TE) performance and crucial applications in mid and high temperatures. Recently, the optimization of TE performance of high-entropy compounds has been focused on reducing thermal conductivity by strengthening the phonon scattering process to improve TE performance. We report a first-principles investigation on nine GeTe-based high-entropy chalcogenide solid solutions constituted of eight metallic elements (Ag, Pb, Sb, Bi, Cu, Cd, Mn, and Sn) and 13 PbSe-based high-entropy chalcogenide solid solutions: Pb 0.99-y Sb 0.012 Sn y Se 1-2x Te x S x (x = 0.1, 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, and y = 0) and Pb 0.99-y Sb 0.012 Sn y Se 1-2x Te x S x (y = 0.05, 0.1, 0.15, 0.2, 0.25 and x = 0.25). We have investigated the mechanical properties focusing on Debye temperature (Θ D ), thermal conductivity (κ), Grüneisen parameter (γ α ), dominant phonon wavelength (λ dom ), and melting temperature (T m ). We find that the lattice thermal conductivity is significantly reduced when GeTe is alloyed into the following compositions: Ge 0.75 Sb 0.13 Pb 0.12 Te, Ge 0.61 Ag 0.11 Sb 0.13 Pb 0.12 Bi 0.01 Te, and Ge 0.61 Ag 0.11 Sb 0.13 Pb 0.12 Mn 0.05 Bi 0.01 Te. This reduction is due to the mass increase and strain fluctuations. The results also show that Ge 0.61 Ag 0.11 Sb 0.13 Pb 0.12 Bi 0.01 Te solid solution has the lowest Young’s modulus (30.362 GPa), bulk and shear moduli (18.626 and 12.359 GPa), average sound velocity (1653.128 m/sec), Debye temperature (151.689 K), lattice thermal conductivity (0.574 W.m –1 .K –1 ), dominant phonon wavelength (0.692 Å), and melting temperature (535.91 K). Moreover, Ge 0.61 Ag 0.11 Sb 0.13 Pb 0.12 Bi 0.01 Te has the highest Grüneisen parameter with a reduced and temperature-independent lattice thermal conductivity. The positive correlation between Θ D and κ is revealed. Alloying of PbSe-based high-entropy by Sb, Sn, Te, and S atoms at the Se and Pb sites resulted in much higher shear strains resulted in the reduction of phonon velocity, a reduced Θ D , and a lower lattice thermal conductivity.

74 ATOMIC AND MOLECULAR PHYSICS↗

Isothermal sections of the quasi-ternary systems Ag{sub 2}S(Se)–Ga{sub 2}S(Se){sub 3}–In{sub 2}S(Se){sub 3} at 820 K and the physical properties of the ternary phases Ga{sub 5.5}In{sub 4.5}S{sub 15}, Ga{sub 6}In{sub 4}Se{sub 15} and Ga{sub 5.5}In{sub 4.5}S{sub 15}:Er{sup 3+}, Ga{sub 6}In{sub 4}Se{sub 15}:Er{sup 3+}

Isothermal sections of the quasi-ternary systems Ag{sub 2}S(Se)–Ga{sub 2}S(Se){sub 3}–In{sub 2}S(Se){sub 3} at 820 K were compared. Along the 50 mol% Ag{sub 2}S(Se), both systems feature continuous solid solutions with the chalcopyrite structure. Along the 17 mol% Ag{sub 2}S(Se), the interactions at the AgIn{sub 5}S(Se){sub 8}–'AgGa{sub 5}S(Se){sub 8}' sections are different. In the Ag{sub 2}S–Ga{sub 2}S{sub 3}–In{sub 2}S{sub 3} system the existence of the layered phase AgGa{sub x}In{sub 5–x}S{sub 8}, 2.25≤x≤2.85, was confirmed (S.G. P6{sub 3}mc). The Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system features the formation of solid solution (up to 53 mol% Ga{sub 2}Se{sub 3}) based on AgIn{sub 5}Se{sub 8} (S.G. P-42m). Crystal structure, atomic coordinates were determined by powder diffraction method for samples from the homogeneity region of AgIn{sub 5}Se{sub 8}. Specific conductivities of the crystals Ga{sub 6}In{sub 4}Se{sub 15} (1.33·10{sup −6} Ω{sup −1} m{sup −1}), Ga{sub 5.94}In{sub 3.96}Er{sub 0.1}Se{sub 15} (3.17·10{sup −6} Ω{sup −1} m{sup −1}), Ga{sub 5.5}In{sub 4.5}S{sub 15} (7.94·10{sup −6} Ω{sup −1} m{sup −1}), Ga{sub 5.46}In{sub 4.47}Er{sub 0.07}S{sub 15} (1·10{sup −9} Ω{sup −1} m{sup −1}) were measured at room temperature. Optical absorption and photoconductivity spectra were recorded in the range 400–760 nm. The introduction of erbium leads to an increase in the absorption coefficient and to the appearance of absorption bands at 530, 660, 810, 980, 1530 nm. - Highlights: • Nature of solid solutions in Ag{sub 2}S(Se)–Ga{sub 2}S(Se){sub 3}–In{sub 2}S(Se){sub 3} (820 K) were discussed. • Crystal structures of ternary and quaternary compounds were discussed. • Specific conductivity, optical properties of four single crystals were measured. • Photoconductivity of the Ga{sub 5.5}In{sub 4.5}S{sub 15} in the range 400–760 nm were recorded.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of the introduction of oxide ion vacancies into cubic fluorite-type rare earth oxides on the NO decomposition catalysis

Cubic fluorite-type solid solutions based on Pr{sub 6}O{sub 11} and CeO{sub 2} were synthesized and oxide anion vacancies were intentionally introduced into the cubic fluorite-type lattice through the charge compensating mechanism by Mg{sup 2+} and/or Ca{sup 2+} doping into their lattices. The oxide anion vacancies bring about positive effect on NO decomposition catalysis. The reason for the increase in the catalytic activity was attributed to defect fluorite-type structures close to the C-type cubic one, because C-type cubic rare earth oxides, in which one-quarter of the oxygen atoms in the fluorite-type structure are removed, show high NO decomposition activity. In particular, the positive effect of the formation of oxide anion vacancies was significant for Pr{sub 6}O{sub 11} and its solid solutions, because the molar volume of Pr{sub 6}O{sub 11} is larger than that of CeO{sub 2}, and Pr{sub 6}O{sub 11} contains Pr{sup 3+} as well as Pr{sup 4+} and thereby a small amount of oxide anion vacancies exist inherently in the lattice. - Graphical abstract: Oxide anion vacancies intentionally introduced into the cubic fluorite-type lattice bring about positive effect on NO decomposition catalysis. - Highlights: • Cubic fluorite-type solid solutions were synthesized. • Oxide anion vacancies were intentionally introduced into the cubic fluorite-type lattice. • The oxide anion vacancies bring about positive effect on NO decomposition catalysis. • The activity was enhanced by making the structure close to the C-type cubic one.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cluster formula of Fe-containing Monel alloys with high corrosion-resistance

The cluster-plus-glue-atom model is applied in the composition interpretation of Monel alloys. This model considers ideal atomic nearest neighbor configurations among the constituent elements and has been used in understanding compositions of complex alloys like quasicrystals, amorphous alloys, and cupronickels. According to this model, any structure can be expressed by cluster formula [cluster](glue atom){sub x}, x denoting the number of glue atoms matching one cluster. According to this model, two groups of experimental composition series [Fe{sub 1}Ni{sub 12}]Cu{sub x} and [Fe{sub y}Ni{sub 12}]Cu{sub 5} were designed which fell close to conventional Fe-containing Monel alloys. The designed alloys after solution treatment plus water quenching, are monolithic FCC Ni-based solid solutions. Among them, the [Fe{sub 1}Ni{sub 12}]Cu{sub 5} alloy has the highest corrosion resistance in simulated sea water, and its performance is superior to that of industrial Monel 400 alloy. - Highlights: Black-Right-Pointing-Pointer A stable solid solution model is proposed using our 'cluster-plus-glue-atom model'. Black-Right-Pointing-Pointer This model is used to develop Monel corrosion resistant alloys. Black-Right-Pointing-Pointer Single FCC structure is easily retained. Black-Right-Pointing-Pointer The alloys show good corrosion properties. Black-Right-Pointing-Pointer This work contributes to the general understanding of engineering alloys.

36 MATERIALS SCIENCE↗

Substitutions into the trigonal bipyramidal site of InGaCuO{sub 4}

Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized to understand the influence of the trigonal bipyramidal (TBP) crystallographic M{sup 3+}/Cu{sup 2+} site of the YbFe{sub 2}O{sub 4}-type structure through powder X-ray and neutron diffraction, dielectric and magnetism measurements. The addition of Mg{sup 2+} in the InGaCuO{sub 4} lattice results in a decrease of the dielectric constant, but the dielectric loss is not affected until the concentration of Mg{sup 2+} is above x=0.50. The shift in the diffraction peaks, and subsequently the change in the lattice parameters, cannot be exclusively explained by the change in ionic radii. These results show the first observation of the reduction in axial bond lengths for TBP Cu{sup 2+} in a YbFe{sub 2}O{sub 4}-type crystal lattice. - Graphical abstract: Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized and analyzed with powder X-ray and neutron diffraction, dielectric and magnetism measurements. A shift in the lattice parameters that cannot be explained by the change in ionic radii is addressed through a study of the trigonal bipyramidal site. Highlights: Black-Right-Pointing-Pointer Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized. Black-Right-Pointing-Pointer The observed dielectric properties decreased with the dilution of Cu{sup 2+}. Black-Right-Pointing-Pointer Antiferromagnetic interactions, without ordering, were observed in InGaCu{sub 1-x}Mg{sub x}O{sub 4}. Black-Right-Pointing-Pointer A reduction in the axial TBP bond lengths produced a large change in the c/a ratio. Black-Right-Pointing-Pointer Orbital overlap across the TBP layers greatly affected the observed properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Nanocrystalline SnO 2 –TiO 2 System‒Part II: Surface Energies and Thermodynamic Stability

The thermodynamic stability of nanocrystalline SnO 2 –TiO 2 solid solutions was studied experimentally. Microcalorimetry of water adsorption revealed a systematic decrease in the surface energy with increasing Ti 4+ content in the SnO 2 ‐rich compositions, consistent with previous reports of Ti 4+ segregation on the surface. The surface energy change was accompanied by an increase in the magnitude of the heat of water adsorption, also indicating a modification of the SnO 2 surface by Ti 4+ . Supporting the water adsorption data, calculations using high‐temperature oxide melt solution calorimetry data also suggest a decrease in the interface energies. A thermodynamic analysis showed that the observed surface energy decrease is responsible for an increase in the stability of solid solutions in the nanophase regime. Although a miscibility gap is expected in this system from bulk phase diagrams, the surface energy contribution modifies the bulk trend and promotes extensive solid solutions when the surface area is above a critical value dependent on the surface energy and the bulk enthalpy of mixing.

Miagava, Joice↗

Synthesis, structure and electrical properties of Cu{sub 3.21}Ti{sub 1.16}Nb{sub 2.63}O{sub 12} and the CuO{sub x}-TiO{sub 2}-Nb{sub 2}O{sub 5} pseudoternary phase diagram

Subsolidus phase relations in the CuO{sub x}-TiO{sub 2}-Nb{sub 2}O{sub 5} system were determined at 935 deg. C. The phase diagram contains one new phase, Cu{sub 3.21}Ti{sub 1.16}Nb{sub 2.63}O{sub 12} (CTNO) and one rutile-structured solid solution series, Ti{sub 1-3x}Cu{sub x}Nb{sub 2x}O{sub 2}: 0<x<0.2335 (35). The crystal structure of CTNO is similar to that of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) with square planar Cu{sup 2+} but with A site vacancies and a disordered mixture of Cu{sup +}, Ti{sup 4+} and Nb{sup 5+} on the octahedral sites. It is a modest semiconductor with relative permittivity {approx}63 and displays non-Arrhenius conductivity behavior that is essentially temperature-independent at the lowest temperatures. - Graphical abstract: The CuO{sub x}-TiO{sub 2}-Nb{sub 2}O{sub 5} phase diagram was determined at 935 deg. C and contains one new phase, Cu{sub 3.21}Ti{sub 1.16}Nb{sub 2.63}O{sub 12}, pictured, a modest semiconductor with {epsilon}{sub r}{approx}63, and one rutile-structured solid solution series, Ti{sub 1-3x}Cu{sub x}Nb{sub 2x}O{sub 2}. Highlights: > Subsolidus phase relations in the CuO{sub x}-TiO{sub 2}-Nb{sub 2}O{sub 5} system were determined at 935 deg. C. > A new phase, Cu{sub 3.21}Ti{sub 1.16}Nb{sub 2.63}O{sub 12} (CTNO), was found with a CaCu{sub 3}Ti{sub 4}O{sub 12}-like crystal structure. > We discovered one rutile-structured solid solution series, Ti{sub 1-3x}Cu{sub x}Nb{sub 2x}O{sub 2}: 0<x<0.2335 (35). > CTNO has square planar Cu{sup 2+}, A site vacancies and Cu{sup +}, Ti{sup 4+} and Nb{sup 5+} disordered on octahedral sites. > CTNO is a modest semiconductor with relative permittivity {approx}63.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase stability and magnetic and electronic properties of a spark plasma sintered CoFe – P soft magnetic alloy

More efficient power conversion devices are able to transmit greater electrical power across larger distances to satisfy growing global electrical needs. A critical requirement to achieve more efficient power conversion are the soft magnetic materials used as core materials in transformers, inductors, and motors. To that effect it is well known that the use of non-equilibrium microstructures, which are, for example, nanocrystalline or consist of single phase solid solutions, can yield high saturation magnetic polarization and high electrical resistivity necessary for more efficient soft magnetic materials. In this work, we synthesized CoFe – P soft magnetic alloys containing nanocrystalline, single phase solid solution microstructures and studied the effect of a secondary intermetallic phase on the saturation magnetic polarization and electrical resistivity of the consolidated alloy. Single phase solid solution CoFe – P alloys were prepared through mechanically alloying metal powders and phase decomposition was observed after subsequent consolidation via spark plasma sintering (SPS) at various temperatures. The secondary intermetallic phase was identified as the orthorhombic (Co x Fe 1-x ) 2 P phase and the magnetic properties of the (Co x Fe 1-x ) 2 P intermetallic phase were found to be detrimental to the soft magnetic properties of the targeted CoFe – P alloy.

36 MATERIALS SCIENCE↗

Dissolution of Used Nuclear Fuel using a TBP/n-paraffin Solvent

The complete recycle of used nuclear fuel (UNF) is desirable to recover the energy value from the remaining U and the higher actinides produced during fuel irradiation; however, the construction of a large-scale reprocessing facility is prohibitively expensive. A simplified flowsheet with a reduced equipment footprint is needed to improve the economic viability. To address this issue, we evaluated a hybrid process which combines the dissolution of UNF pretreated (oxidized) for tritium removal in a tributyl phosphate (TBP) solvent with the solvent extraction cycles required for recovery of the actinide and lanthanide elements. To demonstrate the feasibility of the hybrid process, we prepared actinide solid solutions containing selected fission product elements as surrogates for pretreated, irradiated light water reactor fuel. The distribution of the actinide and fission product elements was measured between the solvent and residual solids to determine dissolution efficiencies. Dissolution of the solid solutions in the TBP solvent was effective for the recovery of both the actinide and lanthanide elements. An increase in the TBP concentration and temperature improved the dissolution efficiencies for these elements. Two-stage dissolutions were successfully used to recover nearly all the actinides and most of the lanthanides from the solid solutions. Our data indicate that most of the fission products generated during fuel irradiation except for the lanthanides and Tc (based on data for Re) would remain in the undissolved solids. The Am/Cm, lanthanides, and other fission product are easily scrubbed from the solvent by contact with nitric acid generating a pure U/Np/Pu stream.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Resorption of Ca{sub 3–} {sub x}M{sub 2x}(PO{sub 4}){sub 2} (M = Na, K) Calcium Phosphate Bioceramics in Model Solutions

The resorbability of bioceramics in the Ca{sub 3}(PO{sub 4}){sub 2}–CaNaPO{sub 4}–CaKPO{sub 4} system is evaluated in an approach involving thermodynamic assessment of solubility and investigation of the dissolution kinetics in model media, in particular in citric acid solutions. Thermodynamic calculation indicates high solubility of the Ca{sub 5}Na{sub 2}(PO{sub 4}){sub 4}, α-CaМPO{sub 4}, β-CaKPO{sub 4}, and β-СаK{sub 0.6}Na{sub 0.4}PO{sub 4} phases. Investigation of the dissolution kinetics of ceramics has made it possible to identify two distinct types of behavior of resorbable materials in weakly acidic solutions: with fast resorption kinetics in the case of the phases based on nagelschmidtite solid solutions and α-CaМPO{sub 4} disordered high-temperature solid solutions, and with a nearly constant, relatively low dissolution rate and a high solubility limit in the case of β-СaK{sub 1–} {sub x}Na{sub x}-based phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Degradation of electrical resistivity of tungsten following shielded neutron irradiation

A major challenge for heat transfer in nuclear materials is to ensure thermal mobility after high amounts of neutron irradiation. Tungsten is widely selected as a heat transfer material in fusion reactors. In metals, thermal conductivity is dominated by electrons’ ability to transfer energy. Neutron irradiation generates point defects, clusters, and solid transmutation (e.g.rhenium and osmium in tungsten), which inhibit electron motion. The purpose of this work is to quantify the irradiation-induced change in electron mobility and deconvolute transmutation and microstructural effects on observed changes to electron mobility. Single and polycrystalline tungsten were fast neutron irradiated in the High Flux Isotope Reactor at Oak Ridge National Laboratory to doses between 0.2 and 0.7 displacements per atom (dpa) and temperatures from 500 °C to 1000 °C. Grain growth was observed in all samples. Microstructure and transmutation were quantified. The geometric orientation of samples with elongated grains has been shown to affect electrical resistivity. A mathematical model was developed and used to deconvolute solid-solution transmutation, grain, and temperature-dependent lattice effects on resistivity. At ~0.4 dpa at ~590 °C, the combined resistivity degradation due to voids, vacancies, interstitials, and dislocations is estimated to be greater than the contribution from solid solution Re transmutation, which is greater than the contribution from grain boundaries. At doses of ~0.7 dpa at ~750 °C, solid solution Re contributions are greater than all other effects combined. As a result, this work establishes a basis to predict the effects of irradiation temperature and transmutation on thermal properties of tungsten and highlights the importance of irradiation temperature.

36 MATERIALS SCIENCE↗

Next neighbors effect along the Ca–Sr–Ba-åkermanite join: Long-range vs. short-range structural features

An original approach has been developed herein to explore the correlations between short- and long-range structural properties of solid solutions. X-ray diffraction (XRD) and electronic absorption spectroscopy (EAS) data were combined on a (Ca,Sr,Ba){sub 2}(Mg{sub 0.7}Co{sub 0.3})Si{sub 2}O{sub 7} join to determine average and local distances, respectively. Instead of varying the EAS-active ion concentration along the join, as has commonly been performed in previous studies, the constant replacement of Mg{sup 2+} by a minimal fraction of a similar size cation (Co{sup 2+}) has been used to assess the effects of varying second-nearest neighbor cations (Ca, Sr, Ba) on the local distances of the first shell. A comparison between doped and un-doped series has shown that, although the overall symmetry of the Co-centered T1-site was retained, greater relaxation occurs at the CoO{sub 4} tetrahedra which become increasingly large and more distorted than the MgO{sub 4} tetrahedra. This is indicated by an increase in both the quadratic elongation (λ{sub T1}) and the bond angle variance (σ{sup 2}{sub T1}) distortion indices, as the whole structure expands due to an increase in size in the second-nearest neighbors. This behavior highlights the effect of the different electronic configurations of Co{sup 2+} (3d{sup 7}) and Mg{sup 2+} (2p{sup 6}) in spite of their very similar ionic size. Furthermore, although the overall symmetry of the Co-centered T1-site is retained, relatively limited (<10 deg) angular variations in O–Co{sup 2+}–O occur along the solid solution series and large changes are found in molar absorption coefficients showing that EAS Co{sup 2+}-bands are highly sensitive to change in the local structure. - Graphical abstract: Average (Mg–O) vs. local (Co–O{sub local}) tetrahedral bond distances in function of the average X cation radius in the (Ca,Sr,Ba){sub 2}(Mg{sub 0.7}Co{sub 0.3})Si{sub 2}O{sub 7} join. - Highlights: • New method to assess short- vs. long-range properties of non-ideal solid solutions. • Constant Co{sup 2+}-for-Mg replacement turns the Ca–Sr–Ba-åkermanite join EAS-active. • Co→Mg substitution does not produce any alteration in the average structure. • Relaxation around Co-tetrahedra scales with second-nearest neighbor cation radius. • Different electronic configurations of Co and Mg cause different local structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal chemistry and phase equilibria of the CaO-½Ho 2 O 3 -CoO z system at 885 °C in air

Ini this work, the phase equilibrium diagram of the CaO-½Ho 2 O 3 -CoO z system was determined at 885 °C in air. This diagram offers compatibility relationships in the ternary oxide system that are essential for processing and for the understanding of properties of several thermoelectric phases in the system. Four three-phase regions and three solid solution tie-line regions were determined in the CaO-½Ho 2 O 3 -CoO z system. In the CaO-Ho 2 O 3 system, while a small solid solution region was identified for (Ho 1-x Ca x )O (3-z)/2 (0 ≤x ≤ 0.14), Ho was not present in the Ca site of CaO. Neither the reported Ho2CoO4 phase in the Ho 2 O-CoO z system nor the Ca-doped (Ho 1+x Ca1-x)CoO 4-z phase was present at 885 °C. No solid solution of the distorted perovskite, (Ho 1-x Cax)CoO 3-z , was established at this temperature. The CaO-CoO z system consists of two calcium cobaltate thermoelectric compounds. The 2D thermoelectric oxide, (Ca 3-x Ho x )Co 4 O 9-z (0 ≤x ≤ 0.5), has a misfit layered structure, and the 1D Ca 3 Co 2 O 6 consists of chains of alternating CoO 6 trigonal prisms and CoO 6 octahedra. Ca 3 Co 2 O 6 was found to be a stoichiometric compound. A comparison of the phase diagrams of the CaO -½ R 2 O 3 -CoO z (R = La, Nd, Eu, and Ho) systems is given.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metastability in the MgAl 2 O 4 -Al 2 O 3 System

Aluminum oxide must take a spinel form ( γ-Al 2 O 3 ) at elevated temperatures in order for extensive solid solution to form between MgAl 2 O 4 and α-Al 2 O 3 . The solvus line between MgAl 2 O 4 and Al 2 O 3 has been defined at 79.6 wt% Al 2 O 3 at 1500°C, 83.0 wt% Al 2 O 3 at 1600°C, and 86.5 wt% Al 2 O 3 at 1700°C. A metastable region has been defined at temperatures up to 1700°C which could have significant implications for material processing and properties. Additionally, initial processing could have major implications on final chemistry. The spinel solid solution region has been extended to form an infinite solid solution with Al 2 O 3 at elevated temperatures. A minimum in melting at 1975°C and a chemistry of 96 wt% Al 2 O 3 rather than a eutectic is present, resulting in no eutectic crystal formation during solidification.

36 MATERIALS SCIENCE↗

Investigation of Interdiffusion Behavior in the Mo-Zr Binary System via Diffusion Couple Studies

Zirconium has recently garnered attention for use as a diffusion barrier between U–Mo metallic nuclear fuels and Al alloy cladding. In order to gain a fundamental understanding of the diffusional interactions, the interdiffusion behavior in the binary Mo–Zr system was investigated via solid-to-solid diffusion couples annealed in the temperature range of 750 to 1050 degrees C. A combination of scanning electron microscopy, X-ray energy dispersive spectroscopy, and electron probe microanalysis were used to examine the microstructure and concentration profiles across the interdiffusion zone. A large __-Zr (cI2) solid solution layer and a thin (approximately 1–2 um) layer of Mo2Zr (cF24) developed in all couples. Parabolic growth constants and concentration dependent interdiffusion coefficients were calculated for the Mo2Zr and Zr solid solution phases, respectively. The pre-exponential factor and activation energy for growth of the Mo2Zr phase were determined to be approximately 6.5 × 10- 15 m2/s and 90 kJ/mol, respectively. The interdiffusion coefficient in ___-Zr solid solution decreased with an increase in Mo concentration. Both the pre-exponential factors (2 × 10- 8 m2/s at 2 at.% Mo to near 5 × 10- 8 m2/s at 9 at.% Mo) and activation energies (140 kJ/mol at 2 at.% Mo to approximately 155 kJ/mol at 9 at.% Mo) of interdiffusion coefficients were determined to increase with an increase in Mo concentration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Single-Step Synthesis of FeSO 4 F 1-y OH y (0 ≤ y ≤ 1) Positive Electrodes for Li-Based Batteries

The recent discovery of electrochemical activity at 3.6 V vs Li + /Li 0 in LiFeSO 4 F has generated widespread research activity in this new family of fluorosulfate electrode materials aiming at either increasing the Fe 3+ /Fe 2+ redox potential, searching for new active members, or extending this family to hydroxyl-fluorosulfates. Here we present a new low temperature single step synthesis of FeSO 4 F 1-y OH y phases using FeF 3 and Fe 2 (SO 4 ) 3 ∙ nH 2 O as precursors. Using thorough chemical analytical techniques to test for F - content in conjunction with Moessbauer measurements, we demonstrate the existence of a limited solid solution (0.35 < y < 1) within this system. Members pertaining to this solid solution have a redox activity ranging from 3.2 to 3.6 V vs Li + /Li 0 and show sustained reversible capacity retention of 130 mAh/g which makes them potentially interesting for Li-based polymer batteries. We demonstrate that the Li-insertion-deinsertion mechanism depends markedly on the sample F - content by using joint in situ XRD and Moessbauer spectroscopy. Moreover, we show the versatility of our synthetic approach by extending it to the elaboration of Fe 1-z M z SO 4 F 1-y OH y phases with M = Ti and V.

25 ENERGY STORAGE↗

Sustainable solutions for solid waste management in Southeast Asian countries

Human activities generate waste and the amounts tend to increase as the demand for quality of life increases. Today's rate in the Southeast Asian Nations (ASEANs) is alarming, posing a challenge to governments regarding environmental pollution in the recent years. The expectation is that eventually waste treatment and waste prevention approaches will develop towards sustainable waste management solutions. This expectation is for instance reflected in the term 'zero emission systems'. The concept of zero emissions can be applied successfully with today's technical possibilities in the agro-based processing industry. First, the state-of-the-art of waste management in Southeast Asian countries will be outlined in this paper, followed by waste generation rates, sources, and composition, as well as future trends of waste. Further on, solutions for solid waste management will be reviewed in the discussions of sustainable waste management. The paper emphasizes the concept of waste prevention through utilization of all wastes as process inputs, leading to the possibility of creating an ecosystem in a loop of materials. Also, a case study, focusing on the citrus processing industry, is displayed to illustrate the application of the aggregated material input-output model in a widespread processing industry in ASEAN. The model can be shown as a closed cluster, which permits an identification of opportunities for reducing environmental impacts at the process level in the food processing industry. Throughout the discussion in this paper, the utilization of renewable energy and economic aspects are considered to adapt to environmental and economic issues and the aim of eco-efficiency. Additionally, the opportunities and constraints of waste management will be discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗