Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Microstructure and mechanical properties of nanoscale Cu/(Ta50Nb25Mo25) multilayers

Nanoscale Cu/(Ta50Nb25Mo25) multilayers comprised of medium entropy alloy Ta50Nb25Mo25 and pure Cu are found to exhibit similar length-scale-dependent deformation mechanisms as metallic multilayers with elemental individual layers, i.e., confined layer slip at layer thickness of tens of nanometers and shear localization at several nanometers. The hardness of the nanoscale Cu/(Ta50Nb25Mo25) multilayers is higher as compared to the pure element FCC/BCC multilayers due to the extra solid solution strengthening contribution in the BCC layer. The synergy between the size effect and solid solution strengthening mechanism is discussed. In conclusion, this is an early report of the multi-component multilayers, which serves to provide directions for developing novel multilayer materials.

36 MATERIALS SCIENCE↗

Oxidation and embrittlement of Ti-6Al-2Sn-4Zr-2Mo alloy

A thermogravimetric analysis monitoring study has been conducted for Ti-6Al-2Sn-4Zr-2Mo in the 593-760 C range, with a view to its total oxidation kinetics in laboratory air. In addition, tensile elongation was obtained for selected foil specimens after their exposure to simulated Space Shuttle reentry conditions. The total weight gain with time exhibited two parabolic stages separated by a transient region which is the result of a simultaneous increase in the parabolic growth rate constant for the oxide and in oxygen solubility at the oxide-metal interface. A model for the total oxidation kinetics accounting for the two individual components (oxide growth and solid solution formation) is proposed; the activation energy for oxygen diffusion in the alpha-solid solution is shown to approximate the activation energy for the degradation of tensile elongation of the alloy in its foil gage condition.

Shenoy, R. N.↗

Survey of Portions of the Chromium-Cobalt-Nickel-Molybdenum Quaternary System at 1,200 Degrees C

A survey was made of portions of the chromium-cobalt-nickel-molybdenum quaternary system at 1,200 degrees c by means of microscopic and x-ray diffraction studies. Since the face-centered cubic (alpha) solid solutions form the matrix of almost all practically useful high-temperature alloys, the solid solubility limits of the quaternary alpha phase were determined up to 20 percent molybdenum. The component cobalt-nickel-molybdenum, chromium-cobalt-molybdenum, and chromium-nickel-molybdenum ternary systems were also studied. The survey of these systems was confined to the determination of the boundaries of the face-centered cubic (alpha) solid solutions and of the phases coexisting with alpha at 1,200 degrees c.

Rideout, Sheldon Paul↗

Synthesis and microstructure characterization of Ni-Cr-Co-Ti-V-Al high entropy alloy coating on Ti-6Al-4V substrate by laser surface alloying

Ni-Cr-Co-Ti-V-Al high-entropy alloy coating on Ti-6Al-4V was synthesized by laser surface alloying. The coating is composed of a B2 matrix and (Co, Ni)Ti{sub 2} compounds with few β-Ti phases. Focused ion beam technique was utilized to prepare TEM sample and TEM observations agree well with XRD and SEM results. The formation of HEA phases is due to high temperature and rapid cooling rate during laser surface alloying. The thermodynamic parameters, ΔH{sub mix}, ΔS{sub mix}and δ as well as Δχ, should be used to predict the formation of the BCC solid solution, but they are not the strict criteria. Especially when Δχ reaches a high value (≥ 10%), BCC HEA will be partially decomposed, leading to the formation of (Co, Ni)Ti{sub 2} compound phases. - Highlights: •Preparing HEA coating on Ti-6Al-4V by laser surface alloying is successful. •The synthesized HEA coating mainly consists of BCC HEA and (Co, Ni)Ti{sub 2} compounds. •FIB technology was used to prepare the sample for TEM analysis. • ΔH{sub mix}, ΔS{sub mix}and δ as well as Δχ, should be all used to predict the formation of solid solution.

36 MATERIALS SCIENCE↗

Composition and microstructure of zirconium and hafnium germanates obtained by different chemical routes

The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. The products were characterized using high-temperature X-ray diffraction analysis (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and thermal (TG/DTA) analysis. To investigate the phase composition and stoichiometry of compounds the unit cell parameters were refined by full-profile Rietveld XRD analysis. The morphology of products and its evolution during high-temperature treatment was examined by SEM analysis. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. The ceramic route requires a multi-stage high-temperature treatment to obtain zirconium and hafnium germanates of 95% purity or more. Also, there are strong diffusion limitations to obtain hafnium germanate Hf{sub 3}GeO{sub 8} by ceramic route. On the contrary, the co-precipitation route leads to the formation of nanocrystalline single phase germanates of stoichiometric composition at a relatively low temperatures (less than 1000 °C). The results of quantitative XRD analysis showed the hafnium germanates are stoichiometric compounds in contrast to zirconium germanates that form a set of solid solutions. This distinction may be related to the difference in the ion radii of Zr and Hf. - Graphical abstract: The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. Display Omitted - Highlights: • Zr and Hf germanates were synthesized by ceramic and co-precipitation routes. • The morphology of products depends on the synthesis parameters. • Zirconium germanates forms a set of solid solutions. • Hafnium germanates are stoichiometric compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compatibility of hydrogarnet, Ca{sub 3}Al{sub 2}(SiO{sub 4}){sub x}(OH){sub 4(3−x)}, with sulfate and carbonate-bearing cement phases: 5–85 °C

The stable existence of hydrogarnet in Portland cement compositions cured at temperatures below 55 °C has long been predicted from application of equilibrium thermodynamics. However hydrogarnet is not often reported in hydrated commercial Portland cements. The substitutions (SO{sub 4}–CO{sub 3}–OH) in AFm have previously been shown to stabilise AFm to higher temperatures and raise the temperature at which AFm converts to Si-free hydrogarnet, C{sub 3}AH{sub 6}. But unanswered question remains about the compatibility of AFm and AFm solid solutions with Si-substituted hydrogarnet, Ca{sub 3}Al{sub 2}(SiO{sub 4}){sub x}(OH){sub 4(3} {sub −} {sub x)}. Phase relations of C{sub 3}AH{sub 6} and Ca{sub 3}Al{sub 2}(SiO{sub 4}){sub x}(OH){sub 4(3} {sub −} {sub x)} at sulfate and carbonate activities conditioned respectively by (gypsum and SO{sub 4}-AFt) and (calcite and CO{sub 3}-AFt) have been determined experimentally in the range 5–85 °C. The results confirm the instability of Si-free hydrogarnet with carbonate and sulfate-bearing cement phases, but do indicate that a range of silica-substituted hydrogarnet solid solutions are stable under conditions likely to be encountered in blended cement systems.

36 MATERIALS SCIENCE↗

Thermoelectric transport properties of polycrystalline SnSe alloyed with PbSe

Single-crystal SnSe has been found to exhibit exceptional thermoelectric performance, but the efficiency of polycrystalline samples is still far from satisfactory. In this paper, with an intention to effectively suppress heat conduction and minimally affect hole transport, we alloyed p-type polycrystalline SnSe with PbSe. Single-phase Sn 1-x Pb x Se solid solutions were formed up to x ≈ 0.12. The lattice thermal conductivity was reduced from 1.4 to 0.85 W m -1 K -1 by 12 at. % PbSe alloying due to strain and mass fluctuations. Interestingly, the Seebeck coefficient and carrier concentration were nearly unchanged by Pb substitution, indicating a constant effective mass and an undisrupted valence band maximum. A peak figure of merit (ZT) of 0.85 at 800 K was obtained in the x = 0 sample, and relatively high performance was also achieved in solid solutions. Finally, a concise model was developed involving multiple carrier scattering mechanisms, capturing the dependence of the mobility on composition and temperature.

36 MATERIALS SCIENCE↗

Mixed sodium nickel-manganese sulfates: Crystal structure relationships between hydrates and anhydrous salts

The present contribution provides new structural and spectroscopic data on the formation of solid solutions between hydrated and dehydrated sulfate salts of sodium-nickel and sodium-manganese in a whole concentration range: Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·yH{sub 2}O, 0≤ x≤1.0. Using powder XRD, electron paramagnetic resonance spectroscopy (EPR), IR and Raman spectroscopy it has been found that double sodium-nickel and sodium-manganese salts form solid solutions Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·4H{sub 2}O with a blödite-type of structure within a broad concentration range of 0≤x≤0.49, while the manganese rich compositions Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·2H{sub 2}O (0.97≤x≤1.0) crystallize in the kröhnkite-type of structure. The Ni-based blödites Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·4H{sub 2}O dehydrate between 140 and 260 °C into anhydrous salts Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}, 0≤ x≤0.44, with a structure where Ni{sub 1−x}Mn{sub x}O{sub 6} octahedra are bridged into pairs by edge- and corner sharing SO{sub 4}{sup 2−} groups. Both TEM and EPR methods show that the Ni{sup 2+} and Mn{sup 2+} ions are homogenously distributed over three crystallographic positions of the large monoclinic cell. The dehydration of the kröhnkite phase Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·2H{sub 2}O yields the alluaudite phase Na{sub 2+δ}Mn{sub 2-δ/2}(SO{sub 4}){sub 3}, where the Na-to-Mn ratio decreases and all Ni{sup 2+} dopants are released from the structure. The process of the dehydration is discussed in terms of structural aspects taking into account the distortion degree of the Ni,MnO{sub 6} and SO{sub 4} polyhedra. - Graphical abstract: Thermal dehydration of the blödite phase Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·4H{sub 2}O (0≤ x≤0.49) yields nickel-manganese sulfates Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2} (0≤ x≤0.44) with a large monoclinic cell, while the alluaudite phase Na{sub 2+δ}Mn{sub 2-δ/2}(SO{sub 4}){sub 3} is obtained from the kröhnkite phase Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·2H{sub 2}O (0.97≤x≤1.0). - Highlights: • Blödite phases accommodate Mn{sup 2+} ions. • Blödite structure is transformed to a super-cell structure. • The kröhnkite phase accommodates only limited amounts of Ni{sup 2+} ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Electrical Properties of a Fluorite-Like Nd{sub 5}Mo{sub 3}O{sub 16} Compound with Partial Substitution of Molybdenum by Tungsten, Niobium, or Vanadium

The phase formation of Nd{sub 5}Mo{sub 3–x}W{sub x}O{sub 16.5}, Nd{sub 5}Mo{sub 3–x}Nb{sub x}O{sub 16.5–х/2}, and Nd{sub 5}Mo{sub 3–x}V{sub x}O{sub 16.5–х/2} solid solutions based on a fluorite-like Nd{sub 5}Mo{sub 3}O{sub 16.5} compound (mixed conductor with interstitial oxygen conductivity) has been studied. The electrical conductivity of doped compounds obeys the Arrhenius law and, at a low impurity content, is as high as 0.03–0.08 S/cm at 800°C. Substitution of Mo{sup 6+} cations by V{sup 5+} and Nb{sup 5+} cations reduces the interstitial oxygen content, which causes a decrease in the solid-solution electrical conductivity by 1–2 orders of magnitude and a decrease in the cubic unit-cell parameter. A wide diffuse anomaly with a maximum of about 1500–4000 has been observed in the temperature dependence of the permittivity for all single-crystal and polycrystalline samples in the range of 300–900°C.

36 MATERIALS SCIENCE↗

Structure, microstructure and infrared studies of Ba{sub 0.06}(Na{sub 1/2}Bi{sub 1/2}){sub 0.94}TiO{sub 3}-NaNbO{sub 3} ceramics

Lead-free solid solutions (1-x)Ba{sub 0.06}(Na{sub 1/2}Bi{sub 1/2}){sub 0.94}TiO{sub 3}-xNaNbO{sub 3} (0 ≤ x ≤ 1.0) were prepared by conventional ceramic fabrication technique. X-ray diffraction and Rietveld refinement analyses of these ceramics were carried out using X’Pert HighScore Plus software to determine the crystal symmetry, space group and unit cell dimensions. Rietveld refinement revealed that NaNbO{sub 3} with orthorhombic structure was completely diffused into Ba{sub 0.06}(Na{sub 1/2}Bi{sub 1/2}){sub 0.94}TiO{sub 3} lattice having the rhombohedral-tetragonal symmetry. EDS and SEM studies were carried out in order to evaluate the quality and purity of the compounds. SEM images showed a change in grain shape with the increase of NaNbO{sub 3} content. FTIR spectra confirmed the formation of solid solution.

36 MATERIALS SCIENCE↗

The solubility and site preference of Fe{sup 3+} in Li{sub 7−3x}Fe{sub x}La{sub 3}Zr{sub 2}O{sub 12} garnets

A series of Fe{sup 3+}-bearing Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} (LLZO) garnets was synthesized using solid-state synthesis methods. The synthetic products were characterized compositionally using electron microprobe analysis and inductively coupled plasma optical emission spectroscopy (ICP-OES) and structurally using X-ray powder diffraction and {sup 57}Fe Mössbauer spectroscopy. A maximum of about 0.25 Fe{sup 3+} pfu could be incorporated in Li{sub 7−3x}Fe{sub x}La{sub 3}Zr{sub 2}O{sub 12} garnet solid solutions. At Fe{sup 3+} concentrations lower than about 0.16 pfu, both tetragonal and cubic garnets were obtained in the synthesis experiments. X-ray powder diffraction analysis showed only a garnet phase for syntheses with starting materials having intended Fe{sup 3+} contents lower than 0.52 Fe{sup 3+} pfu. Back-scattered electron images made with an electron microprobe also showed no phase other than garnet for these compositions. The lattice parameter, a{sub 0}, for all solid-solution garnets is similar with a value of a{sub 0}≈12.98 Å regardless of the amount of Fe{sup 3+}. {sup 57}Fe Mössbauer spectroscopic measurements indicate the presence of poorly- or nano-crystalline FeLaO{sub 3} in syntheses with Fe{sup 3+} contents greater than 0.16 Fe{sup 3+} pfu. The composition of different phase pure Li{sub 7−3x}Fe{sub x}La{sub 3}Zr{sub 2}O{sub 12} garnets, as determined by electron microprobe (Fe, La, Zr) and ICP-OES (Li) measurements, give Li{sub 6.89}Fe{sub 0.03}La{sub 3.05}Zr{sub 2.01}O{sub 12}, Li{sub 6.66}Fe{sub 0.06}La{sub 3.06}Zr{sub 2.01}O{sub 12}, Li{sub 6.54}Fe{sub 0.12}La{sub 3.01}Zr{sub 1.98}O{sub 12}, and Li{sub 6.19}Fe{sub 0.19}La{sub 3.02}Zr{sub 2.04}O{sub 12}. The {sup 57}Fe Mössbauer spectrum of cubic Li{sub 6.54}Fe{sub 0.12}La{sub 3.01}Zr{sub 1.98}O{sub 12} garnet indicates that most Fe{sup 3+} occurs at the special crystallographic 24d position, which is the standard tetrahedrally coordinated site in garnet. Fe{sup 3+} in smaller amounts occurs at a general 96h site, which is only present for certain Li-oxide garnets, and in Li{sub 6.54}Fe{sub 0.12}La{sub 3.01}Zr{sub 1.98}O{sub 12} this Fe{sup 3+} has a distorted 4-fold coordination. - Graphical abstract: Cubic nominally Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} (LLZO) garnet is a promising candidate to be used as a solid electrolyte in Li-ion batteries. A series of Fe{sup 3+}-bearing LLZO garnets was synthesized and characterized compositionally and structurally. {sup 57}Mössbauer measurements were made to determine where Fe is incorporated in the crystal structure. X-ray diffraction, electron microprobe, ICP-OES and {sup 57}Mössbauer measurements are needed to obtain a full description of the synthetic products, some of which contain small amounts of nano- or poorly crystalline FeLaO{sub 3}. - Highlights: • A series of Fe{sup 3+}-bearing Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} (LLZO) garnets was synthesized and characterized compositionally and structurally. • {sup 57}Mössbauer measurements were made to determine where Fe is incorporated in the crystal structure. • Most Fe{sup 3+} substitutes for Li{sup +} in LLZO at the 24d and 96h sites in the cubic phase (Ia-3d). • No more than about 0.25 Fe{sup 3+} pfu can be incorporated into the LLZO garnet structure. • X-ray powder diffractions measurements indicate the presence of both cubic and tetragonal garnets phases in some syntheses. • The probable presence of small amounts of poorly or nano-crystalline FeLaO3 can only be identified by Mössbauer spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenation properties of Li{sub x}Sr{sub 1−x}AlSi studied by quantum-chemical methods (0≤x≤1) and in-situ neutron powder diffraction (x=1)

In-situ neutron powder diffraction studies of the Half-Heusler phase LiAlSi under high deuterium pressures and first principle calculations of solid solutions of Li{sub x}Sr{sub 1−x}AlSi and their hydrides Li{sub x}Sr{sub 1−x}AlSiH were carried out. In contrast to an earlier study, there is no experimental evidence for hydrogen (deuterium) uptake up to gas pressures of 15 MPa and temperatures of 550 °C. Instead a slow decomposition reaction according to LiAlSi+1/2H{sub 2}=LiH+Al+Si was found by in-situ neutron powder diffraction. Theoretical calculations by DFT methods on hypothetical solid solutions of Li{sub x}Sr{sub 1−x}AlSi show the LiAlSi type to be the energetically most stable structure for 0.7<x and the SrAlSi type structure for lower values of x. Hydrides Li{sub x}Sr{sub 1−x}AlSiH favor the SrAlSiH type for all values of x instead of the structure proposed earlier with hydrogen occupying tetrahedral voids in a LiAlSi structure. As an alternative for a cubic structure for LiAlSiH, we suggest the existence of LiAlSiH in the trigonal SrAlSiH type structure and it might be a candidate worthwhile to be considered for preparative work. - Graphical abstract: In-situ neutron powder diffraction of LiAlSi under high D{sub 2} pressure. - Highlights: • In-situ neutron powder diffraction of LiAlSi under high D{sub 2} pressure was carried out. • LiAlSi decomposes according to LiAlSi + ½ H{sub 2} = LiH + Al + Si. • Mixed crystals Li{sub x}Sr{sub 1-x}AlSi and LixSr{sub 1-x}AlSiH were studied theoretically.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure detection of Mg-Zi-Ti-Si amorphous composite coating prepared by SMAT

Highlights: • The Mg-Zn-Ti-Si amorphous composite coating was prepared on Mg alloy via SMAT. • Except for amorphous portion, the phases of coating include Zn, Mg{sub 7}Zn{sub 3}, and Si. • The coating was thick and rough but it was well combined with the matrix. • During SMAT, the matrix surface was also strengthened because of solid-solution and grain refinement. - Abstract: The Mg-Zn-Ti-Si coating was prepared on Mg alloy through surface mechanical attrition treatment (SMAT) which was simple and low-cost. The microstructure and phase composition of coating were detected through a scanning electron microscope (SEM), an X-ray diffractometer (XRD) and a high resolution transmission electron microscope (HRTEM). The results demonstrated that the layer thickness, which depended on the rotation speed, was 20–80 μm. Although the coating was rough, it was well combined with the matrix. The XRD pattern and HRTEM image analysis demonstrated that the coating contained both amorphous and crystalline phases (Zn, Mg{sub 7}Zn{sub 3} and Si). The process also led to matrix surface strengthening; the mechanisms are solid solution and grain refinement.

36 MATERIALS SCIENCE↗

Defects clustering and ordering in di- and trivalently doped ceria

Graphical abstract: Display Omitted Highlights: ► Defect structures in trivalently and divalently doped ceria has been elucidated. ► Dumbbell structure is a universal basic vacancy structure in fluorite oxides. ► Electrostatic attraction dominates elastic interaction in doped ceria. ► Provide a physical picture of conductivity behavior in aliovalently doped ceria. -- Abstract: The formation and growth of defect clusters in CeO{sub 2}-M{sub 2}O{sub 3} (M = La{sup 3+}, Pr{sup 3+}, Sm{sup 3+}, Gd{sup 3+}, Dy{sup 3+}, Y{sup 3+}, Yb{sup 3+}) and CeO{sub 2}-DO (N = Cd{sup 2+}, Ca{sup 2+}, Sr{sup 2+}, Ba{sup 2+}) binary solid solutions have been comparatively studied by atomistic simulations based on energy minimization of atomic interactions. The calculation ensemble, including both divalent and trivalent dopants, shows a similar energetic tendency for defect species (dopants and associated oxygen vacancies) to aggregate and grow. The dumbbell structure has been verified as a universal vacancy structure in oxygen deficient fluorite lattice. Nevertheless, it also demonstrates different tendencies of dopant–vacancy associations that depend on dopant valence and radius. The dopant is site-selective in trivalent defect clusters correlated with dopant size. While in divalent solid solutions, clusters adopt similar dopant–vacancy locations. Furthermore, all clusters in divalently doped ceria have stronger dopant–vacancy associations/interactions compared to those in trivalent ones. As a consequence, the correlation of the dopant size as well as valence effects on oxygen-ion conductivity has been illustrated based on an ordered defect cluster model. This study thereby offers insight into the physical picture of ionic conductivity behavior experimentally obtained in aliovalently doped ceria.

36 MATERIALS SCIENCE↗

Effect of W6+ dopant on the morphology and luminescence properties of NaLa(MoO4)2: Eu3+ phosphors

Highlights: • NaLa(W{sub x}Mo{sub 1−x}O{sub 4}){sub 2}: Eu{sup 3+} with various shapes were synthesized via hydrothermal method. • No structural modifier or organic solvents were used. • Morphology and luminescence properties were manipulated by mole ratio of W/Mo. • NaLa(W{sub x}Mo{sub 1−x}O{sub 4}){sub 2}:Eu{sup 3+} was brighter than that of Com-Y{sub 2}O{sub 3}: Eu{sup 3+}. - Abstract: W{sup 6+} dopant on the NaLa(MoO{sub 4}){sub 2}:Eu{sup 3+} solid solution phosphors with various shapes have been synthesized via the hydrothermal method without using any structural modifier and organic solvents. The morphology and luminescence properties of W{sup 6+} doped NaLa(MoO{sub 4}){sub 2}:Eu{sup 3+} phosphors are obtained and characterized by SEM and PL/PLE spectra. Both morphology and luminescence properties are considered to manipulate by the mole ratio of W/Mo. By increasing the W{sup 6+} amount, particle shapes are changed from rice-shaped particles to spindle-shaped, cocoon-shaped, then to layers of octahedron-shaped. Under UV light excitation, all samples show bright red light due to the characteristic 4f-4f transitions of Eu{sup 3+}. Tungstate and molybdate phosphors have higher luminescence intensity than that of tungstate and molybdate solid solution phosphors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of boron addition on the deformation behavior and microstructure of β-solidify TiAl alloys

Highlights: • Borides could promote the DRX formation to soften TiAl alloys. • Boron addition increases firstly and then stabilizes the deformation activate energy. • The stable region expands with boron increasing in processing maps. • The DRX critical strain increases firstly and then decreases with boron increasing. • DRX softening and strengthening from solid solution and borides influence deformation behavior. - Abstract: The effect of boron addition on the deformation behavior and microstructure of Ti-43Al-6Nb-1Mo -1Cr alloys have been studied in this paper. Boron addition would induce Ti{sub 2}Al(P6{sub 3}/mmc) phase with hexagonal structure formation on the interfaces between TiB and γ phase. TiB would be the obstacles for dislocations slipping and increase the stacking fault energy. Ti{sub 2}Al could also provide the chemical foundation for DRXed γ nucleation and disappear after thermal deformation. Both these two phase could promote DRXed grains nucleation to soften the alloys during thermal deformation. With the strengthen effect of boron solid solution and TiB obstacles, the microstructure evolution, phase transformation and deformation behavior are also discussed and concluded as follow.

36 MATERIALS SCIENCE↗

Ti{sub 2}AlN thin films synthesized by annealing of (Ti+Al)/AlN multilayers

Highlights: • Epitaxial thin films of the MAX phase Ti{sub 2}AlN are obtained by thermal annealing. • A new metastable (Ti,Al,N) solid solution with the structure of α-T is evidenced. • The formation of the MAX phase occurs at low temperature (600 °C). - Abstract: Single-phase Ti{sub 2}AlN thin films were obtained by annealing in vacuum of (Ti + Al)/AlN multilayers deposited at room temperature by magnetron sputtering onto single-crystalline (0001) 4H-SiC and (0001) Al{sub 2}O{sub 3} substrates. In-situ X-ray diffraction experiments combined with ex-situ cross-sectional transmission electron microscopy observations reveal that interdiffusion processes occur in the multilayer at a temperature of ∼400 °C leading to the formation of a (Ti, Al, N) solid solution, having the hexagonal structure of α-Ti, whereas the formation of Ti{sub 2}AlN occurs at 550–600 °C. Highly oriented (0002) Ti{sub 2}AlN thin films can be obtained after an annealing at 750 °C.

36 MATERIALS SCIENCE↗

Facile microwave synthesis of zirconium metal-organic framework thin films on gold and silicon and application to sensor functionalization

Zirconium-based metal-organic frameworks, including UiO-66 and related frameworks, have become the focus of considerable research in the area of chemical warfare agent (CWA) decontamination. However, little work has been reported exploring these metal-organic frameworks (MOFs) for CWA sensing applications. For many sensing approaches, the growth of high-quality thin films of the active material is required, and thin film growth methods must be compatible with complex device architectures. Several approaches to synthesize thin films of UiO-66 have been described but many of these existing methods are complex or time consuming. In this work, we describe the development of a simple and rapid microwave assisted synthesis of oriented UiO-66 thin films on unmodified silicon (Si) and gold (Au) substrates. Thin films of UiO-66 and UiO-66-NH 2 can be grown in as little as 2 min on gold substrates and 30 min on Si substrates. The film morphology and orientation are characterized and the effects of reaction time and temperature on thin film growth on Au are investigated. Both reaction time and temperature impact the overgrowth of protruding discrete crystallites in the thin film layer but, surprisingly, no strong correlation is observed between film thickness and reaction time or temperature. We also briefly describe the synthesis of Zr/Ce solid solution thin films of UiO-66 on Au and report the first synthesis of a solid solution thin film MOF. Finally, we demonstrate the utility of the microwave method for the facile functionalization of two sensor architectures, plasmonic nanohole arrays and microresonators, with UiO-66 thin films.

36 MATERIALS SCIENCE↗