Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “small projects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Thermodynamics of Minerals Stable near Earth's Surface

Project “Thermodynamics of Minerals Stable Near the Earth’s Surface” uses specialized calorimetric techniques to obtain new thermochemical data for solid phases of interest in the Earth’s “critical zone”, the near surface regions of the planet most directly affecting and affected by human activity. Major activity was in three areas: manganese oxide materials, aluminum clusters which are precursors to aluminum oxyhydroxide precipitates, and zeolites. All these classes of minerals are potential carriers of heavy metals and radionuclides in the environment, both within their crystal structures and as adsorbed layers or colloids. Their thermodynamic stability, as well as the sequence of stability of competing phases, governs the aqueous solubility of contaminants (and nutrients) in soil, groundwater, and sediments. The thermodynamics of these phases is strongly affected by particle size and crystallinity, since they often occur as very fine particles which do not coarsen in the near-surface environment. Many of these materials exhibit extensive polymorphism, multicomponent solid solution, and variable hydration states. Thus, one must define and systematize important thermodynamic variables, since one cannot make measurements on each and every possible phase, particle size, and composition. A major finding of the work on manganese oxides was labile water-induced oxidation-reduction reactions. These will be studied further by a combination of thermodynamic and synchrotron-based spectroscopic methods, the latter in collaboration with Peggy O’Day at UC Merced. The adsorption of other species, including simple organics, on such redox-active surfaces will also be investigated by a combination of thermochemical and spectroscopic studies. Studies of the energetics of water adsorption on mineral surfaces will be expanded to emphasize the adsorption of CO2 and small organic molecules, relevant to soil, groundwater, and the subsurface environment. Gas adsorption calorimetry, immersion calorimetry, and solution calorimetry will be combined with appropriate analytical and spectroscopic techniques to obtain a comprehensive picture of the interactions and their energetics. The evolution of aqueous aluminum clusters to form aluminum oxyhydroxide precipitates will be studied in detail by a combination of calorimetric and structural methods applied to aqueous samples aged at room temperature. The energetics of new classes of clusters will be explored. The project addresses several common themes relevant to the broad mission of the Department of Energy. Thermochemical data for minerals stable near the Earth’s surface, though still incomplete, are essential for understanding both natural and anthropogenic processes that affect our very existence on this planet. Such data contribute to the fundamental underpinning for mitigation and management strategies for the extraction and use of energy. Fundamental thermodynamic and mechanistic understanding is required to model processes ranging from heavy metal pollution to nuclear waste disposal to climate change.

58 GEOSCIENCES↗
DOE OSTI2021

Controlled Pyrolysis: A Robust Scalable Composite Recycling Technology

The reinforced composites industry is facing significant challenges in handling the scrap composite material from automobile manufacturing, the wind turbine industry, and others. The fibers in the material, whether they be carbon, glass, or other materials have commercial value if they can be recovered successfully. Successfully means the fibers are clean with no sizing or other binders and have adequate strength and physical properties that would allow them to be economically reprocessed into valuable product. The composites recycling project was an industry-collaborative effort to develop a composite recycling technology using controlled pyrolysis. Through the recycling of scrap and end-of-life (EOL) cured composite materials, this pilot study was intended to create a business case by realizing a cost-effective means for recycling EOL and production scrap composite materials, ultimately reducing the volume of composite materials destined for landfill. The project was led by the Institute for Advanced Composites Manufacturing Innovation (IACMI), the American Composites Manufacturers Association (ACMA), Oak Ridge National Laboratory (ORNL), Continental Structural Plastics (CSP) a Teijin Group Company, CHZ Technologies, and A. Schulman with support from Owens Corning, John Deere, General Electric (GE), Ashland LLC, and Plastics Europe (CEFIC). The team studied and tested CHZ Technologies’ controlled pyrolysis system, known as the Thermolyzer TM , which operates on a scalable basis to convert organic polymer materials into a clean synthesis gas and char containing the recoverable carbon and glass fiber reinforcement. The recoverable energy contained in the input polymers creates the synthesis gas that can be used to provide heat to the Thermolyzer TM primary reactor in a sustainable manner. That is, once the Thermolyzer TM is started with a small amount of external natural gas, the synthesis gas that is created from the polymers will continue to operate the burners so long as feedstock is supplied. The reinforcing fiber materials remaining in the solid phase char were separated and cleaned for re-use in other polymer systems based on the retained properties of the fibers. The study created reports (attached in the appendix) on the Mass and Energy Balances, syngas analytics, VOC assessment, yield analysis and other analytics necessary for a Techno-Economic Analysis (TEA) to quantify the economic impact of the recovery and sustainable re-use of the carbon and glass fibers. The process consisted of 4 steps: Selection of 4 samples of cured composite waste materials from project partners interested in materials recycling and recovering the reinforcing fibers for best case re-use. The materials included glass fiber (GF) polyester/vinyl ester automotive SMC from CSP, GF epoxy balsa/PVC foam wind blades from GE, carbon fiber (CF) epoxy wind blade laminated spar caps from GE, and GF/CF epoxy hybrid assembly from John Deere. Processing the waste composite samples into 1-2” shreds. Packaging the shredded composites into bulk sacks on international shipping pallets for shipment to KUG in Forst (Lausitz), Germany. Pyrolysis of the shredded composites under controlled conditions designed for each polymer system. Collecting samples of the gas and char for analysis. Shipping the char containing the CF/GF back to the US for the next steps of testing the fibers and developing protocols for sustainable re-use of the fibers in composite applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Composite resonances at a 10 TeV muon collider

We investigate the reach for resonances of the composite Higgs models at a 10 TeV μ + μ – collider with up to 10 ab –1 luminosity. The strong dynamics sector is modeled by the minimal coset SO(5)/SO(4), where vector resonances are in (3, 1) of SO(4) and fermions are in (2, 2). Various production and decay channels are studied. For the spin-1 resonances, the projections are made based on the radiative return and vector boson fusion production channels. The muon collider can cover most of the kinematically allowed mass range and can measure the coupling gρ to percent level. For the fermionic resonances (i.e. the top partners), pair production easily covers the resonance mass below 5 TeV, while single production extends the reach to 6 TeV for a small ξ = 0.015.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Utilizing Essential Symmetry Breaking in Auxiliary-Field Quantum Monte Carlo: Application to the Spin Gaps of the C 36 Fullerene and an Iron Porphyrin Model Complex

We present three distinct examples where phaseless auxiliary-field quantum Monte Carlo (ph-AFQMC) can be reliably performed with a single-determinant trial wave function with essential symmetry breaking. Essential symmetry breaking was first introduced by Lee and Head-Gordon [ Phys. Chem. Chem. Phys. 2019, 21, 4763-4778, 10.1039/C8CP07613H]. We utilized essential complex and time-reversal symmetry breaking with ph-AFQMC to compute the triplet–singlet energy gap in the TS12 set. We found statistically better performance of ph-AFQMC with complex-restricted orbitals than with spin-unrestricted orbitals. We then showed the utilization of essential spin symmetry breaking when computing the singlet–triplet gap of a known biradicaloid, C 36 . ph-AFQMC with spin-unrestricted Hartree–Fock (ph-AFQMC+UHF) fails catastrophically even with spin-projection and predicts no biradicaloid character. With approximate Brueckner orbitals obtained from regularized orbital-optimized second-order Møller–Plesset perturbation theory (κ-OOMP2), ph-AFQMC quantitatively captures strong biradicaloid character of C 36 . Lastly, we applied ph-AFQMC to the computation of the quintet–triplet gap in a model iron porphyrin complex where brute-force methods with a small active space fail to capture the triplet ground state. We show unambiguously that neither triplet nor quintet is strongly correlated using UHF, κ-OOMP2, and coupled-cluster with singles and doubles (CCSD) performed on UHF and κ-OOMP2 orbitals. There is no essential symmetry breaking in this problem. By virtue of this, we were able to perform UHF+ph-AFQMC reliably with a cc-pVTZ basis set and predicted a triplet ground state for this model geometry. The largest ph-AFQMC in this work correlated 186 electrons in 956 orbitals. Our work highlights the utility, scalability, and accuracy of ph-AFQMC with a single-determinant trial wave function with essential symmetry breaking for systems mainly dominated by dynamical correlation with little static correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Subglacial Discharge Effects on Antarctic Ice‐Shelf Basal Melt and the Southern Ocean in a Global, Coupled Ocean—Sea‐Ice Model

Subglacial freshwater from beneath Antarctica enters the ocean at depth, enhancing ice-shelf melting and affecting Southern Ocean properties. To study these effects in an Antarctic-wide context, we use a continental-scale subglacial hydrology model that calculates grounding line freshwater flux for a global, coupled ocean—sea-ice model. We find that subglacial discharge impacts melt rates primarily through continental shelf temperature modification, contrasting with findings from regional studies that do not permit large-scale adjustments. The consequence is that Antarctic melt rates scale with subglacial discharge more strongly than inferred from regional studies. We also find that the addition of buoyancy at depth facilitates heat upwelling to the surface, resulting in higher sea ice volume downstream of cold ice shelves and lower sea ice volume downstream of warm ice shelves. This highlights the drawbacks of simplifications in previous global studies that deposit Antarctic meltwater at the ocean surface and find uniform ocean surface cooling and sea-ice growth. While the patterns we find are robust, we conclude that the addition of subglacial discharge at present-day rates has a small effect on basal melt rates, hydrography, and sea ice. However, stronger discharge can have significant effects and can even accelerate a shift from low to high melting for ice shelves close to such a tipping point. Finally, the importance of feedbacks between enhanced cavity overturning and continental shelf conditions poses a complication for parameterizing subglacial discharge effects on melting for ice-sheet projections that do not include a coupled ocean component.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Evaluating the Limits of QAOA Parameter Transfer at High-Rounds on Sparse Ising Models With Geometrically Local Cubic Terms

The emergent practical applicability of the Quantum Approximate Optimization Algorithm (QAOA) for approximate combinatorial optimization is a subject of considerable interest. One of the primary limitations of QAOA is the task of finding a set of good parameters, which is usually done using a variational optimization loop. Parameter transfer, or parameter concentration, is a phenomenon where QAOA angles trained on problem instances that are self-similar tend to perform well for other problem instances from that similar class. This suggests a potentially highly efficient and scalable non-variational learning method for QAOA angle finding. In this work, we systematically study QAOA parameter transferability from small problem sizes (16 and 27 decision variables) onto large problem instances (up to 156 qubits) for heavy-hex graph Ising models with geometrically local higher order terms using the Julia based QAOA simulation tool \texttt{JuliQAOA} to perform classical angle finding for up to $49$ QAOA layers ($p$). Parameter transfer of the fixed angles is validated using a combination of full statevector, Projected Entangled Pair States (PEPS), Matrix Product State (MPS), and LOWESA numerical simulations. We find that the QAOA parameter transfer from single instances applied to other (unseen) problem instances does not in general provide monotonically improving performance as a function of $p$ - there are many cases where the performance temporarily decreases as a function of $p$ - but despite this the transferred angles have a general trend of improved expectation value as the QAOA depth increases, in many cases converging close to the true ground-state energy of the $100+$ qubit instances. We also sample the hardware-compatible Ising models using the ensemble of transfer-learned QAOA parameters on several superconducting qubit IBM Quantum processors with 127, 133, and 156 qubits. We find continuous solution quality improvement of the hardware-compatible QAOA circuits run on the IBM NISQ processors up to $p=5$ on \texttt{ibm\_fez}, up to $p=9$ on \texttt{ibm\_torino}, and up to $p=10$ on \texttt{ibm\_pittsburgh}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Almost medium-free measurement of the Hoyle state direct-decay component with a TPC

The structure of the Hoyle state, a highly α -clustered state at 7.65 MeV in 12 C, has long been the subject of debate. Understanding if the system comprises of three weakly interacting α particles in the 0s orbital, known as an α-condensate state, is possible by studying the decay branches of the Hoyle state. The direct decay of the Hoyle state into three α particles, rather than through the 8 Be ground state, can be identified by studying the energy partition of the three α particles arising from the decay. This paper provides details on the breakup mechanism of the Hoyle stating using a new experimental technique. Method: By using β-delayed charged-particle spectroscopy of 12 N using the Texas active target time-projection chamber, a high-sensitivity measurement of the direct 3α decay ratio can be performed without contributions from pileup events. A Bayesian approach to understanding the contribution of the direct components via a likelihood function shows that the direct component is <0.043% at the 95% confidence level. This value is in agreement with several other studies, and, here, we can demonstrate that a small nonsequential component with a decay fraction of about 10 –4 is most likely. Here, the measurement of the non-sequential component of the Hoyle state decay is performed in an almost medium-free reaction for the first time. The derived upper limit is in agreement with previous studies and demonstrates sensitivity to the absolute branching ratio. Further experimental studies would need to be combined with robust microscopic theoretical understanding of the decay dynamics to provide additional insight into the idea of the Hoyle state as an α condensate.

6 ≤ A ≤ 19↗
DOE OSTI2023

AmeriFlux FLUXNET-1F CA-MA3 Manitoba Agricultural Site 3

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site CA-MA3 Manitoba Agricultural Site 3. This is the FLUXNET version of the carbon flux data for the site CA-MA3 Manitoba Agricultural Site 3 produced by applying the standard ONEFlux (1F) software. Site Description - This field has been in perennial forages (grass (timothy, fescue, brome) with small amount of legume) for several decades. Field size = 40 ha. Hay was harvested once each year. Cattle were placed in the field each autumn to graze. See Table 1 in Taylor et al (2013) describing site management practices.

Amiro, Brian↗
DOE OSTI2021

Hydrothermal Liquid Recovery of Rare Earth Elements and Critical Materials

This project demonstrated the technical viability of using tunable hydrothermal liquid (HTL) solutions to recover valuable minerals from a range of source materials. The effort focused upon rare earth elements (REE) and other minerals critical to the industrial security of the United States. This effort demonstrated, for the first time, that s, supercritical water (SCW) in particular, can: Extract critical and valuable minerals from a range of matrices ranging from rock ore to biomass; The process can be used to recover a wide range of minerals; This novel extraction chemistry can be cheap, simple, and nontoxic/”green”: The chemical extraction uses water, the cheapest industrial acid (sulfuric), and simple salts (i.e. sodium sulfate). However, other acids, salts, and additives could be used as appropriate. This Laboratory Directed Research and Development (LDRD) project identified that the process is complex with many interacting factors, but the benefits are significant if the complexities can be resolved. Challenges remain in the development of this technology and are described in this report. However, the results are positive, and commercial partners have already expressed interest. In summary, a novel, green, inexpensive mineral extraction process has been developed and demonstrated in a small batch reactor system. The effort provided information for an invention disclosure, proposal to DOE, and will support future business development efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Progress Toward the First Search for Bound Neutron Oscillation into Antineutron in a Liquid Argon TPC

This note presents current progress for a neutron-antineutron oscillation ($n–\overline{n}$) search in MicroBooNE paving the way for the first search analysis of such process in a Liquid Argon Time Projection Chamber (LArTPC). Convolutional Neural Network (CNN) and Boosted Decision Tree (BDT) algorithms were used to select signal $n–\overline{n}$ events over cosmogenic backgrounds. The CNN-only, BDT-only, and the combined (CNN+BDT) methods were demonstrated on the Monte-Carlo signal and background events. Validation of the CNNonly and the BDT-only methods was carried out on a small dataset of MicroBooNE Run1 off-beam data, setting the starting point toward further improvement of the analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

In-Conduit Hydropower for Public Water Supply Systems: Development Challenges and Costs

Conduit hydropower leverages existing water infrastructure to provide energy solutions, though deployment has been slow. A 2022 US Department of Energy (DOE)–funded report led by Oak Ridge National Laboratory (ORNL) summarizes a reconnaissance-level study of hydropower potential at national conduits (Kao et al., 2022). The report includes power and energy estimates across three major sectors of conduit hydropower potential: municipal, agricultural, and industrial. Water resources include public water supply systems (municipal and industrial), irrigation canal systems (agricultural), thermoelectric cooling systems (industrial), and wastewater systems (municipal and industrial). In total, 1.41 GW of power potential was estimated nationwide. Subsequently, DOE has funded ORNL through the Conduit Hydropower Engineering, Evaluation, and Technology Acceleration project (CHEETA) to improve deployment potential for conduit hydropower. Work thus far has focused on “in-conduit” hydropower (ICH)—or “in-pipe” hydropower—for public water supply systems, though the project is planning to cover conduit hydropower more broadly. The timeline of ORNL’s conduit hydropower related research and development (R&D) is shown in Figure 1. The results of CHEETA should benefit the hydropower industry by providing insights into costs, barriers, and other considerations that impact project development. The hydropower industry and municipal/industrial conduit stakeholders will use the output to inform development decisions and advance low-impact hydropower growth in the US.

13 HYDRO ENERGY↗
DOE OSTI2022

Investigations on a fuzzy process: effect of diffusion on calibration and particle identification in Liquid Argon Time Projection Chambers

Ionization electron diffusion in Liquid Argon Time Projection Chambers (LArTPCs) has typically been considered at the detector design stage, but little attention has been given to its effects on calibration and particle identification. We use a GEANT4-based simulation to study how diffusion impacts these techniques, and give consideration to how this effect is simulated. We find that diffusion can cause a drift-dependent bias to both the median and Most Probable Value (MPV) of dQ/dx distributions. The bias is estimated to be ~2.5% (median) and ~5.0% (MPV) for typical maximum drift times in currently running LArTPCs before adding detector specific considerations such as electric field non-uniformities. This information indicates that these metrics should not be used for calibration without care, contrary to the conventional wisdom. The impact of diffusion on the ability of LArTPCs to separate muons and protons is small, and not expected to pose any problems in future detectors. Diffusion may however be a significant source of systematic uncertainty when separating particles of more similar masses (muons and pions, kaons and protons). Separation of such populations may be improved by implementation of a drift-time dependent particle identification.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Temperature-dependent model of helium bubble expansion and bursting in tungsten

Continuum-scale models that can reliably predict the behavior of helium in tungsten are of interest to the fusion community due to the projected impact of these materials on fusion reactor operation. In this work, we perform molecular dynamics simulations of spherical helium bubbles of various sizes in tungsten at different temperatures and depths with the goal of determining a mathematical model of the pressure and density at which the bubbles initially expand or burst as a function of depth, size, temperature, and surface orientation. The bubbles are small enough that their loop-punching pressures cannot be accurately predicted with continuum mechanics, and their expansion behavior is important, as it appears to cause many of the features observed on helium-irradiated tungsten surfaces. We vary the temperature, bubble size, bubble depth, and surface orientation in each case, recording the bubble pressure and density that result in bubble expansion. An exponential function with three adjustable parameters is found to fit the results well; the parameters that best fit our results are provided.

36 MATERIALS SCIENCE↗
DOE OSTI2024

An uncertain future change in aridity over the tropics

Abstract An ensemble of climate models from phase six of the Coupled Model Intercomparison Project shows that temperature and potential evapotranspiration (PET) are projected to increase globally towards the end of the 21st century. However, climate models show a spatially heterogeneous change in precipitation over the tropics. Consequently, future changes in aridity (a measure of water availability) are complex and location-dependent. We assess future changes in aridity using three climate models and several single-forcing experiments. Near-term (2021–2040) changes in aridity are small, and we focus instead on its long-term (2081–2100) changes. We show that the increase in greenhouse gases (GHG) primarily explains the spatial pattern, magnitude and ensemble spread of the long-term future changes in aridity. On this timescale, the effects of changes in emissions of anthropogenic aerosols are moderate compared to the effects of increases in atmospheric GHG concentrations. Model diversity in the responses to GHG concentration is large over northern Africa and North and South America. We suggest the large uncertainty is due to differences between models in simulating the effects of an increase in GHG concentrations on surface air temperature over the North Atlantic Ocean, on the interhemispheric temperature gradient, and on PET over North and South America.

Environmental Sciences & Ecology↗
DOE OSTI2023

Triply-resonant sum frequency conversion with gallium phosphide ring resonators

We demonstrate quasi-phase matched, triply-resonant sum frequency conversion in 10.6-µm-diameter integrated gallium phosphide ring resonators. A small-signal, waveguide-to-waveguide power conversion efficiency of 8 ± 1.1%/mW; is measured for conversion from telecom (1536 nm) and near infrared (1117 nm) to visible (647 nm) wavelengths with an absolute power conversion efficiency of 6.3 ± 0.6%; measured at saturation pump power. For the complementary difference frequency generation process, a single photon conversion efficiency of 7.2%/mW from visible to telecom is projected for resonators with optimized coupling. Efficient conversion from visible to telecom will facilitate long-distance transmission of spin-entangled photons from solid-state emitters such as the diamond NV center, allowing long-distance entanglement for quantum networks.

42 ENGINEERING↗
DOE OSTI2023

Modification of CO 2 /H 2 O selectivity of polymer for carbon capture materials

Today, the atmospheric carbon dioxide (CO 2 ) concentration is 421ppm, over one hundred ppm higher than it was at any point in the last 800,000 years (NASA, 2023). Multiple strategies are necessary to reduce the presence of carbon dioxide in the atmosphere. Besides limiting CO 2 output, carbon capture technology is essential to reduce the overall amount of CO 2 . The Microencapsulated CO 2 Sorbents (MECS) team at Lawrence Livermore National laboratory has developed technologies that can capture CO 2 inside microcapsules, where it can be temporarily stored and later released. In 2017, the commercial potential of these microcapsules was recognized. The brewing industry only requires about one third of the CO 2 it releases for carbonization and packaging, which Congwang Ye and Lionel Keene learned when they met with leaders of small breweries in Colorado to discuss employing carbon capture microcapsules in their processes to reduce their carbon footprint and production costs (Thomas, 2017). The breweries were interested in the technology, but the existing microcapsules require hydration, which is an expensive process for small brewers. In order to develop the microcapsules so they can be commercialized, it is essential to reduce their water loss to improve efficiency and reduce costs for the customers. One method to resolve this issue is to alter the membrane formulation by adding a material that is known to be hydrophobic to decrease the water permeability of the entire membrane. The goal of this project was to study the effect of dispersing a nanomaterial in the polymer membrane shells of microcapsules on the water vapor and carbon dioxide permeability of the membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Constraints on cosmology and baryonic feedback with joint analysis of Dark Energy Survey Year 3 lensing data and ACT DR6 thermal Sunyaev-Zel'dovich effect observations

We present a joint analysis of weak gravitational lensing (shear) data obtained from the first three years of observations by the Dark Energy Survey and thermal Sunyaev-Zel'dovich (tSZ) effect measurements from a combination of Atacama Cosmology Telescope (ACT) and Planck data. A combined analysis of shear (which traces the projected mass) with the tSZ effect (which traces the projected gas pressure) can jointly probe both the distribution of matter and the thermodynamic state of the gas, accounting for the correlated effects of baryonic feedback on both observables. We detect the shear$~\times~$tSZ cross-correlation at a 21$\sigma$ significance, the highest to date, after minimizing the bias from cosmic infrared background leakage in the tSZ map. By jointly modeling the small-scale shear auto-correlation and the shear$~\times~$tSZ cross-correlation, we obtain $S_8 = 0.811^{+0.015}_{-0.012}$ and $\Omega_{\rm m} = 0.263^{+0.023}_{-0.030}$, results consistent with primary CMB analyses from Planck and P-ACT. We find evidence for reduced thermal gas pressure in dark matter halos with masses $M < 10^{14} \, M_{\odot}/h$, supporting predictions of enhanced feedback from active galactic nuclei on gas thermodynamics. A comparison of the inferred matter power suppression reveals a $2-4\sigma$ tension with hydrodynamical simulations that implement mild baryonic feedback, as our constraints prefer a stronger suppression. Finally, we investigate biases from cosmic infrared background leakage in the tSZ-shear cross-correlation measurements, employing mitigation techniques to ensure a robust inference. Our code is publicly available on GitHub.

Pandey, S. [Johns Hopkins U.; Columbia U.] (ORCID:↗
DOE OSTI2021

Mechanical Design Progress of the In Situ Nanoprobe Instrument for APS-U

The In Situ Nanoprobe (ISN, 19-ID) beamline will be a new best-in-class long beamline to be constructed as part of the Advanced Photon Source Upgrade (APS-U) project [1, 2]. To achieve long working distance at high spatial resolution, the ISN instrument will be positioned 210 m downstream of the x-ray source, in a dedicated satellite building, currently under construction [3]. The ISN instrument will use a nano-focusing Kirkpatrick-Baez (K-B) mirror system, which will focus hard x-rays to a focal spot as small as 20 nm, with a large working distance of 61 mm. The large working distance provides space for various in situ sample cells for x-ray fluorescence tomography and ptychographic 3D imaging, allows the use of a separate, independent vacuum chambers for the optics and sample, and provides the flexibility to run experiments in vacuum or at ambient pressure. A consequence of the small spot size and large working distance are stringent requirements for high angular stability of the K-B mirrors (5 nrad V-mirror and 16 nrad H-mirror) and high relative stability be-tween focus spot and sample (4 nmRMS). Additional features include fly-scanning up to 2 kg mass, sample plus in situ cell, at 1 mm/s in vertical and/or horizontal directions over an area of 10 mm x 10 mm. Environmental capabili-ties will include heating and cooling, flow of fluids and applied fields, as required for electrochemistry and flow of gases at high temperature for catalysis. To achieve these capabilities and precise requirements we have used precision engineering fundamentals to guide the design process.

Kearney, Steven P.↗