Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sails”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Canopy reflectance models illustrate varying NDVI responses to change in high latitude ecosystems

Multiyear trends in Normalized Difference Vegetation Index (NDVI) have been used as metrics of high latitude ecosystem change based on the assumption that NDVI change is associated with ecological change, generally as changes in green vegetation amount (green leaf area index [LAI] or plant cover). Further, no change in NDVI is often interpreted as no change in these variables. Three canopy reflectance models including linear mixture model, the SAIL (Scattering from Arbitrarily Inclined Leaves) model, and the GeoSail model were used to simulate scenarios representing high latitude landscape NDVI responses to changes in LAI and plant cover. The simulations showed inconsistent NDVI responses. Clear increases in NDVI are generally associated with increases in LAI and plant cover. At higher values of LAI, the change in NDVI per unit change in LAI decreases, with very little change in spruce forest NDVI where crown cover is >50% and at the tundra–taiga ecotone with transitions from shrub tundra to spruce woodland. These lower responses may bias the interpretation of greening/browning trends in boreal forests. Variations in water or snow coverage were shown to produce outsized nonbiological NDVI responses. Inconsistencies in NDVI responses exemplify the need for care in the interpretation of NDVI change as a metric of high latitude ecosystem change, and that landscape characteristics in terms of the type of cover and its characteristics, such as the initial plant cover, must be taken into account in evaluating the significance of any observed NDVI trends.

Karl F Huemmrich↗
NASA NTRSDate not supplied

Ground-testing of One-way Ranging from a Lunar Beacon Demonstrator Payload (Lunar Node -1)

Similar to lighthouses providing navigation aids and awareness to ships sailing along the coast, in-situ navigation beacons can be used to provide redundancy, awareness, and improved onboard position knowledge for vehicles operating in and around the lunar sphere of influence. Lunar Node - 1 is a radio frequency navigation beacon that is manifested on Intuitive Machines' NOVA-C lunar lander flight in 2022 for operation during cruise and from a mid-latitude landing location. This payload utilizes commercial components developed for Low Earth Orbit applications and packages them into an integrated package to provide a navigation reference signal as part of a large lunar-centric navigation network. As part of its operations, Deep Space Network ground stations will operate as the notional "user" of this service, allowing for performance characterization, calibration, and operation of the beacon payload. This paper provides an overview of the payload, how its fits into a large concept of operations, and ground testing results. A specific focus is on ground testing of the payload with DSN ground receivers as part of RF Compatibility Testing. A primary goal of this testing was to characterize a pseudo-noise ranging code sequence generated by the payload. The results in this paper define the testing sequence, unique operational constraints with two-way ranging ground equipment, and applications of the ground-derived error model to predicted in-flight performance of the ranging code.

Evan Anzalone↗
NASA NTRSDate not supplied

Ground-Testing of One-Way Ranging from a Lunar Beacon Demonstrator Payload (Lunar Node -1)

Similar to lighthouses providing navigation aids and awareness to ships sailing along the coast, in-situ navigation beacons can be used to provide redundancy, awareness, and improved onboard position knowledge for vehicles operating in and around the lunar sphere of influence. Lunar Node - 1 is a radio frequency navigation beacon that is manifested on Intuitive Machines' NOVA-C lunar lander flight in 2022 for operation during cruise and from a mid-latitude landing location. This payload utilizes commercial components developed for Low Earth Orbit applications and packages them into an integrated package to provide a navigation reference signal as part of a large lunar-centric navigation network. As part of its operations, Deep Space Network ground stations will operate as the notional "user" of this service, allowing for performance characterization, calibration, and operation of the beacon payload. This paper provides an overview of the payload, how its fits into a large concept of operations, and ground testing results. A specific focus is on ground testing of the payload with DSN ground receivers as part of Radio Frequency (RF) Compatibility Testing. A primary goal of this testing was to characterize a pseudo-noise ranging code sequence generated by the payload. The results in this paper define the testing sequence, unique operational constraints with two-way ranging ground equipment, and applications of the ground-derived error model to predicted in-flight performance of the ranging code.

Evan J Anzalone↗
NASA NTRS2020

Using Reinforcement Learning to Design Missed Thrust Resilient Trajectories

From ion thrusters to solar sails, spacecraft continue to adopt new and more efficient forms of propulsion. As these low-thrust propulsion meth- ods have become more prevalent, new challenges have arisen. Depending on the mission, low-thrust propulsion elements may need to thrust con- tinuously for days/months. During these thrusting periods, external fac- tors, such as a micro-meteoroid impact or a software glitch, may cause the spacecraft to prematurely cease its thrust stage. Half of all deep space missions enter a safe mode where they cannot thrust every four months. These missed thrust events can result in the complete loss of a space- craft for time-dependent trajectories like planetary rendezvous. This paper demonstrates how neural networks, trained using reinforcement learning, can autonomously correct for missed thrust events during an interplanetary trajectory.

Laipert, Frank E.↗
NASA NTRSDate not supplied

Mission Operations, Cubed: NASA Marshall Operations Support for SmallSats

SmallSats have come a long way since the Huntsville Operations Support Center (HOSC) at NASA’s Marshall Space Flight Center supported its first “minisatellite” mission in 2010. And just as SmallSats themselves have evolved in those 12 years, so too has the HOSC’s mission support for SmallSats. Marshall Space Flight Center has a long history with payload and mission operations, including support for the Apollo missions to the moon, the Space Shuttle program, and 21 years of continuous around-the-clock science operations support for research aboard the International Space Station. Today, the HOSC is a multi-tenant facility, supporting not only ISS, but also NASA’s Commercial Crew program, the Space Launch System, the Hubble and Chandra observatories and others – including multiple SmallSat missions. Two SmallSat solar sail missions will be among those taking advantage of the HOSC’s resources for planning, training for and executing mission operations – the Near Earth Asteroid (NEA) Scout and Solar Cruiser missions. One of 10 6U CubeSats manifest on the Artemis I launch of NASA’s Space Launch System rocket this year, NEA Scout’s three-year mission will be supported through a more traditional operations concept, with a dedicated Flight Controller staff operating within the HOSC. Scheduled to launch as part of the Interstellar Mapping and Acceleration Probe (IMAP) in February 2025, Solar Cruiser’s 11-month mission will take a next-generation approach to operations by utilizing a multi-mission flight controller concept, as well as Marshall’s Telescience Resource Kit (TreK). TreK provides a suite of software applications and libraries that allow the Mission Operations Center to serve as an in-house ground system which incorporates remote and automation capability options for engineers and scientists. This presentation will compare the approaches the HOSC will use to support these two missions as a way of demonstrating the array of options NASA MSFC offers for operations support for CubeSat and SmallSat missions.

Darren S Wallace↗
NASA NTRSDate not supplied

Design Development of a Stable, Lightweight, Tall and Self-Deploying Lunar Tower

Deployable composite booms with spaceflight heritage are being investigated at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) and the Massachusetts Institute of Technology (MIT) Space Resources Workshop for their potential to be vertically deployed in the lunar gravity field, in support of the NASA Artemis campaign. This paper reports new design development results—after the original presentation at the NASA 2020 BIG Idea Challenge—for a 16.5-meter-tall, compact, self-deploying composite tower intended to support the exploration of lunar permanently shadowed regions by nearby robotic assets or humans. Possible applications include vertical solar arrays and the provision of elevated lines-of-sight to science or engineering payloads, in support of nearby targets operating in areas of interest that may be hard to reach. Useful elevated payloads include radio repeaters, remote sensing and imaging, navigation and power beaming systems. However, while these lightweight rollable booms have an excellent height to mass ratio, they typically exhibit axial curvature upon deployment resulting in appreciable lateral dead-load deflection of the tip mass relative to the tower base. This static deflection increases with tower height and tip mass, not only constraining the value delivered by the tower but also endangering its integrity. To develop a competitive, lightweight deployable composite boom tower, a capability to correct static deflections during and after deployment will be required. In this paper, a deployable guy wire stability system will be presented for the MIT / LaRC self-erecting composite boom lunar tower that provides real time measurements, maintains tension both actively (during deployment) and passively (post-deployment), and can serve as a reconfigurable platform to test and trade alternative stability system configurations, such as with added spreaders inspired by sailing boat masts. Using a calibrated photogrammetry system, the natural lateral deflection of the boom tip relative to the boom base at different deployed heights was recorded for different configurations. With real-time force measurements it was found that tensioned guy wires can significantly reduce the static tip deflection of a deployable composite boom under dead load and can dampen a dynamic oscillation in under a minute. It was also found that control authority is greatest where it is needed most, i.e., for the lever arm closest to being opposite the direction of deflection. For a tower height of at least 11 m and spreader length of at least 60 cm, a solution of differential tension in all three arms exists and, in principle, provides sufficient control authority to correct or significantly reduce boom tip deflections. Notably, natural deflections occur almost entirely normal to the seams of the boom cross-section, but the natural boom tip lateral deflection under dead load upon deployment was approximately 5% of boom deployed length, exceeding the manufacturing acceptance specification of 1%. Ongoing and future work includes the further investigation towards mitigating manufacture-caused lateral deflection, trading of alternative guy wire system designs, as well as the design development of a second-generation tower incorporating a more capable boom design with the learnings from the proof-of-concept system presented here.

deployable composite boom↗
NASA NTRSDate not supplied

Low Energy Ionizing Radiation and Plasma Contributions to Radiation Dose in Materials at Sun-Earth Lagrange Points

- High energy radiation environments responsible for radiation damage to thick materials are well characterized and modeled: - Galactic cosmic rays — Badhwar-O’Neil 2020, CREME96, Nymmik - Solar particle events — Emission of Solar Protons, SAPPHIRE, JPL, King 1972 - Trapped radiation belts — AE8/AP8, AE9/AP9/IRENE - Low energy radiation environments responsible for radiation damage to thin materials relevant to Lagrange points and interplanetary missions have not been treated as comprehensively to date: - Solar wind - Magnetosheath - Magnetotail - Concern to spacecraft design and operations is radiation damage to surfaces and thin materials with mission critical applications on exterior of spacecraft - Applications: thermal control coatings, sunshields, multilayer insulation, optical thin film coatings, solar sails, thermo-optical properties of space exposed materials - Damage processes: radiation degradation (total dose), light ion sputtering, proton blistering of soft metals, modification of optical properties (α/ε), modification of charging properties (SEY, surface conductivity)

Joseph I. Minow↗
NASA NTRS2023

Space Weather Investigation Frontier (SWIFT)

The Space Weather Investigation Frontier (SWIFT) mission will aim at making major discoveries on the three-dimensional structure and dynamics of heliospheric structures that drive space weather. The focus will be on Interplanetary Coronal Mass Ejections (ICMEs) that originate from massive expulsions of plasma and magnetic flux from the solar corona. They cause the largest geomagnetic storms and solar energetic particle events, threatening to endanger life and disrupt technology on Earth and in space. A big current problem, both regarding fundamental solar-terrestrial physics and space weather, is that we do not yet understand spatial characteristics and temporal evolution of ICMEs and that the existing remote-sensing and in-situ observatories are not suited for resolving multi-layered and evolutionary structures in these massive storm drivers. Here, we propose a groundbreaking mission concept study using solar sail technology that, for the first time, will make continuous, in-situ multi-point observations along the Sun-Earth line beyond the Lagrange point L1 (sub-L1). This unique position, in combination with L1 assets, will allow distinguishing between local and global processes, spatial characteristics, temporal evolution, and particle energization mechanisms related to ICMEs. In addition, measurements of the magnetic field in earthbound ICMEs and their sub-structures from the SWIFT location will double the current forecasting lead-times from L1. This concept also paves the way for missions with increasingly longer forecasting lead-times, addressing NASA and NOAA’s space weather goals, as set forth by the Decadal Survey. The objective of this communication is to inform the community of the ongoing effort, including plans to further develop the mission concept, supported by the Heliophysics Flight Opportunities Studies (HFOS) program under NASA’s Research Opportunities in Space and Earth Sciences (ROSES).

M. Akhavan-Tafti↗
NASA NTRSDate not supplied

Experimental Setup for Mechanically Testing Subscale Triangular, Rollable, and Collapsible Deployable Composite Booms

High-strain composite deployable space structures are used for space infrastructure and science applications such as solar array supports, antennae, camera masts, and lightweight structures supporting solar sailing propulsion ele-ments. Triangular, Rollable, and Collapsible (TRAC) deployable composite booms are one example of a high-strain composite deployable structure and were studied using novel experimental test and characterization methods developed under the Gravity Offloading and Analysis of Long Imperfection-sensitive Ele-ments (GOALIE) project. In the present work, a subscale 7-m-long TRAC boom was suspended vertically to orient gravity along the length of the boom. By ori-enting vertically, highly nonlinear and unstable behavior often encountered dur-ing horizontally oriented gravity offload testing of similar structures was reduced. Pretest analytical predictions of TRAC booms indicated three unique failure modes, loads, and locations for three unique loading cases of in-plane bending, out-of-plane bending, and axial compression. To investigate the predicted behav-ior, an experimental test was set up to impart mechanical loads to a subscale TRAC boom. The experimental setup, loading cases, and instrumentation used to characterize the mechanical response of a subscale TRAC boom are described in this paper.

High-strain composites↗
NASA NTRSDate not supplied

NASA Small Spacecraft Technology Program: Space Technology Mission Directorate

NASA's Small Spacecraft Technology Program expands the ability to execute unique missions through rapid development and demonstration of capabilities for small spacecraft applicable to exploration, science and the commercial space sector. This presentation provides information on three technology demonstration missions currently on orbit or in development to include Starling, the Advanced Composite Solar Sail System, and DiskSat.

Roger C Hunter↗
NASA NTRSDate not supplied

Using DIC for Long Slender Structures

High-strain composite deployable structures have been developed for systems such as solar arrays, camera masts or solar sailing propulsion elements. Composite booms in such applications are often flattened and then rolled into a small footprint for low-packaged volume and are then deployed in space. There is a need to obtain deformation for long, slender composite booms on earth through gravity offloading by suspending them vertically and applying distal end (tip) loads. Three-dimensional digital image correlation (3D-DIC), along with other measurement techniques, were used to obtain strain and displacement along the length of a 7.5 m subscale composite Triangular, Rollable, and Collapsible (TRAC) boom in preparation for full scale testing of a 30 m boom. However, incorporating 3D-DIC as a primary measurement tool on long, slender, high-aspect-ratio boom structures presents significant challenges. Challenges include small correlated area due to high aspect ratio, limited standoff distance due to size of test area, coordinate system alignment of multiple camera systems along the length of the boom, nodal mesh extraction for adequate test/analysis correlation, as well as measurement comparison between DIC and other instrumentation used such as fiber optic strain sensing (FOSS) and laser displacement tracking. The contents of the proposed paper will focus on techniques and methods for overcoming the previously mentioned challenges associated with applying 3D-DIC to long, slender boom structures. Results from subscale test along with lessons learned will be discussed.

Deployable Boom↗
NASA NTRSDate not supplied

NASA Small Spacecraft Technology Program: Select Technology Demonstration Missions

NASA's Small Spacecraft Technology Program expands the ability to execute unique missions through rapid development and demonstration of capabilities for small spacecraft applicable to exploration, science and the commercial space sector. This presentation provides information on three technology demonstration missions currently on orbit or in development to include Starling, the Advanced Composite Solar Sail System, and DiskSat.

Roger C Hunter↗
NASA NTRSDate not supplied

Experimental Setup for Mechanically Testing Subscale Triangular, Rollable, and Collapsible Deployable Composite Booms

High-strain composite deployable space structures are used for space infrastructure and science applications such as solar array supports, antennae, camera masts, and lightweight structures supporting solar sailing propulsion elements. Triangular, Rollable, and Collapsible (TRAC) deployable composite booms are one example of a high-strain composite deployable structure and were studied using novel experimental test and characterization methods developed under the Gravity Offloading and Analysis of Long Imperfection-sensitive Elements (GOALIE) project. In the present work, a subscale 7-m-long TRAC boom was suspended vertically to orient gravity along the length of the boom. By orienting vertically, highly nonlinear and unstable behavior often encountered during horizontally oriented gravity offload testing of similar structures was reduced. Pretest analytical predictions of TRAC booms indicated three unique failure modes, loads, and locations for three unique loading cases of in-plane bending, out-of-plane bending, and axial compression. To investigate the predicted behavior, an experimental test was set up to impart mechanical loads to a subscale TRAC boom. The experimental setup, loading cases, and instrumentation used to characterize the mechanical response of a subscale TRAC boom are described in this paper.

Experimental testing↗
NASA NTRSDate not supplied

NASA Small Spacecraft Technology Program: Overview and Select Technology Demonstration Missions

NASA's Small Spacecraft Technology Program expands the ability to execute unique missions through rapid development and demonstration of capabilities for small spacecraft applicable to exploration, science and the commercial space sector. This presentation provides information on three technology demonstration missions currently on orbit or in development to include Starling, the Advanced Composite Solar Sail System, and DiskSat. Information on the program's University SmallSat Technology Partnerships initiative will also be provided.

Roger C. Hunter↗
NASA NTRSDate not supplied

NASA Small Spacecraft & Distributed Systems: Overview and Select Technology Demonstration Missions

NASA's Small Spacecraft Technology Program expands the ability to execute unique missions through rapid development and demonstration of capabilities for small spacecraft applicable to exploration, science and the commercial space sector. This presentation provides information on three technology demonstration missions currently on orbit or in development to include Starling, the Advanced Composite Solar Sail System, and DiskSat. Information on the program's University SmallSat Technology Partnerships initiative will also be provided.

Roger C. Hunter↗
DOE OSTI2022

Super-Large-Scale Hierarchically Porous Films Based on Self-Assembled Eye-Like Air Pores for High-Performance Daytime Radiative Cooling

Metal-free polymer daytime radiative cooling coatings with hierarchical eye-like air pores are proposed and fabricated with a super-large-scale film-stretching method. The hierarchically porous film (HPF) can be further coated with polymethyl methacrylate (PMMA) micro-hemispheres, forming coated HPF (cHPF), which do not dramatically change the optical or thermal properties. The cHPF is slightly better with a lower solar absorptivity (2.4%) and a higher thermal emissivity over the atmospheric transparency window (90.1%). The low solar absorptivity is due to the strong scattering of the hierarchical eye-like air pores, while the molecular vibrations and the focusing effect of the PMMA micro-hemispheres contribute to the high emissivity. Further, an average mid-day temperature reduction of 7.92 °C is achieved relative to the air temperature, and the average cooling power reaches 116.0 W m -2 , which are much better than the cooling performances of the commercial cooling cushion. During the day, the cHPF-covered simulated building is up to 6.47 and 4.84 °C cooler than the ambient and the white painted counterpart, respectively. The film is durable and resistant to chemical etching, and very promising to use globally, especially in warm and tropical regions.

36 MATERIALS SCIENCE↗