Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “routing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Cyclic (Alkyl)(amino)carbene Ligands Enable Cu‐Catalyzed Markovnikov Protoboration and Protosilylation of Terminal Alkynes: A Versatile Portal to Functionalized Alkenes**

Abstract Regioselective hydrofunctionalization of alkynes represents a straightforward route to access alkenyl boronate and silane building blocks. In previously reported catalytic systems, high selectivity is achieved with a limited scope of substrates and/or reagents, with general solutions lacking. Herein, we describe a selective copper‐catalyzed Markovnikov hydrofunctionalization of terminal alkynes that is facilitated by strongly donating cyclic (alkyl)(amino)carbene (CAAC) ligands. Using this method, both alkyl‐ and aryl‐substituted alkynes are coupled with a variety of boryl and silyl reagents with high α‐selectivity. The reaction is scalable, and the products are versatile intermediates that can participate in various downstream transformations. Preliminary mechanistic experiments shed light on the role of CAAC ligands in this process.

Gao, Yang↗
DOE OSTI2022

Perovskite Photocatalytic CO 2 Reduction or Photoredox Organic Transformation?

Abstract Metal‐halide perovskites have been explored as photocatalysts for CO 2 reduction. We report that perovskite photocatalytic CO 2 reduction in organic solvents is likely problematic. Instead, the detected products (i.e., CO) likely result from a photoredox organic transformation involving the solvent. Our observations have been validated using isotopic labeling experiments, band energy analysis, and new control experiments. We designed a typical perovskite photocatalytic setup in organic solvents that led to CO production of up to ≈1000 μmol g −1 h −1 . CO 2 reduction in organic solvents must be studied with extra care because photoredox organic transformations can produce orders of magnitude higher rate of CO or CH 4 than is typical for CO 2 reduction routes. Though CO 2 reduction is not likely to occur, in situ CO generation is extremely fast. Hence a suitable system can be established for challenging organic reactions that use CO as a feedstock but exploit the solvent as a CO surrogate.

San Martin, Jovan↗
DOE OSTI2022

Multiple Roles of Alkanethiolate‐Ligands in Direct Formation of H 2 O 2 over Pd Nanoparticles

Abstract Coadsorbed organic species including thiolates can promote direct synthesis of hydrogen peroxide from H 2 and O 2 over Pd particles. Here, density functional theory based kinetic modeling, augmented with activity measurements and vibrational spectroscopy are used to provide atomistic understanding of direct H 2 O 2 formation over alkylthiolate(RS) Pd. We find that the RS species are oxidized during reaction conditions yielding RSO 2 as the effective ligand. The RSO 2 ligand shows superior ability for proton transfer to the intermediate surface species OOH, which accelerates the formation of H 2 O 2 . The ligands promote the selectivity also by blocking sites for unselective water formation and by modifying the electronic structure of Pd. The work rationalizes observations of enhanced selectivity of direct H 2 O 2 formation over ligand‐funtionalized Pd nanoparticles and shows that engineering of organic surface modifiers can be used to promote desired hydrogen transfer routes.

Chen, Lin↗
DOE OSTI2022

Near‐Room‐Temperature Magnetoelectric Coupling via Spin Crossover in an Iron(II) Complex

Abstract Magnetoelectric coupling is achieved near room temperature in a spin crossover Fe II molecule‐based compound, [Fe(1bpp) 2 ](BF 4 ) 2 . Large atomic displacements resulting from Jahn–Teller distortions induce a change in the molecule dipole moment when switching between high‐spin and low‐spin states leading to a step‐wise change in the electric polarization and dielectric constant. For temperatures in the region of bistability, the changes in magnetic and electrical properties are induced with a remarkably low magnetic field of 3 T. This result represents a successful expansion of magnetoelectric spin crossovers towards ambient conditions. Moreover, the observed 0.3–0.4 mC m −2 changes in the H ‐induced electric polarization suggest that the high strength of the coupling obtained via this route is accessible not just at cryogenic temperatures but also near room temperature, a feature that is especially appealing in the light of practical applications.

Owczarek, Magdalena↗
DOE OSTI2023

Solar‐Driven CO 2 Conversion via Optimized Photothermal Catalysis in a Lotus Pod Structure

Abstract Photothermal CO 2 reduction is one of the most promising routes to efficiently utilize solar energy for fuel production at high rates. However, this reaction is currently limited by underdeveloped catalysts with low photothermal conversion efficiency, insufficient exposure of active sites, low active material loading, and high material cost. Herein, we report a potassium‐modified carbon‐supported cobalt (K + −Co−C) catalyst mimicking the structure of a lotus pod that addresses these challenges. As a result of the designed lotus‐pod structure which features an efficient photothermal C substrate with hierarchical pores, an intimate Co/C interface with covalent bonding, and exposed Co catalytic sites with optimized CO binding strength, the K + −Co−C catalyst shows a record‐high photothermal CO 2 hydrogenation rate of 758 mmol g cat −1 h −1 (2871 mmol g Co −1 h −1 ) with a 99.8 % selectivity for CO, three orders of magnitude higher than typical photochemical CO 2 reduction reactions. We further demonstrate with this catalyst effective CO 2 conversion under natural sunlight one hour before sunset during the winter season, putting forward an important step towards practical solar fuel production.

Wang, Hongmin↗
DOE OSTI2023

Modular Functionalization of Metal‐Organic Frameworks for Nitrogen Recovery from Fresh Urine**

Abstract Nitrogen recovery from wastewater represents a sustainable route to recycle reactive nitrogen (Nr). It can reduce the demand of producing Nr from the energy‐extensive Haber‐Bosch process and lower the risk of causing eutrophication simultaneously. In this aspect, source‐separated fresh urine is an ideal source for nitrogen recovery given its ubiquity and high nitrogen contents. However, current techniques for nitrogen recovery from fresh urine require high energy input and are of low efficiencies because the recovery target, urea, is a challenge to separate. In this work, we developed a novel fresh urine nitrogen recovery treatment process based on modular functionalized metal–organic frameworks (MOFs). Specifically, we employed three distinct modification methods to MOF‐808 and developed robust functional materials for urea hydrolysis, ammonium adsorption, and ammonia monitoring. By integrating these functional materials into our newly developed nitrogen recovery treatment process, we achieved an average of 75 % total nitrogen reduction and 45 % nitrogen recovery with a 30‐minute treatment of synthetic fresh urine. The nitrogen recovery process developed in this work can serve as a sustainable and efficient nutrient management that is suitable for decentralized wastewater treatment. This work also provides a new perspective of implementing versatile advanced materials for water and wastewater treatment.

Guo, Lei↗
DOE OSTI2023

One Collision—Two Substituents: Gas–Phase Preparation of Xylenes under Single–Collision Conditions

The fundamental reaction pathways to the simplest dialkylsubstituted aromatics—xylenes (C 6 H 4 (CH 3 ) 2 )—in high-temperature combustion flames and in low-temperature extraterrestrial environments are still unknown, but critical to understand the chemistry and molecular mass growth processes in these extreme environments. Exploiting crossed molecular beam experiments augmented by state-of-the-art electronic structure and statistical calculations, this study uncovers a previously elusive, facile gas-phase synthesis of xylenes through an isomer-selective reaction of 1-propynyl (methylethynyl, CH 3 CC) with 2-methyl-1,3-butadiene (isoprene, C 5 H 8 ). The reaction dynamics are driven by a barrierless addition of the radical to the diene moiety of 2-methyl-1,3-butadiene followed by extensive isomerization (hydrogen shifts, cyclization) prior to unimolecular decomposition accompanied by aromatization via atomic hydrogen loss. This overall exoergic reaction affords a preparation of xylenes not only in high-temperature environments such as in combustion flames and around circumstellar envelopes of carbon-rich Asymptotic Giant Branch (AGB) stars, but also in low-temperature cold molecular clouds (10 K) and in hydrocarbon-rich atmospheres of planets and their moons such as Triton and Titan. Furthermore, our study established a hitherto unknown gas-phase route to xylenes and potentially more complex, disubstituted benzenes via a single collision event highlighting the significance of an alkyl-substituted ethynyl-mediated preparation of aromatic molecules in our Universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synergy of Oxygen Vacancies and Base Sites for Transfer Hydrogenation of Nitroarenes on Ceria Nanorods

Abstract CeO 2 nanorod based catalysts for the base‐free synthesis of azoxy‐aromatics via transfer hydrogenation of nitroarenes with ethanol as hydrogen donor have been synthesized and investigated. The oxygen vacancies (O v ) and base sites are critical for their excellent catalytic properties. The O v , i.e., undercoordinated Ce cations, serve as the sites to activate ethanol and nitroarenes by lowering the energy barrier to transfer hydrogen from α−C sp3 −H in ethanol to the nitro group coupling it to the redox reactions between Ce 3+ and Ce 4+ . At the same time, the base sites catalyze the condensation step to selectively produce azoxy‐aromatics. The catalytic route opens a much improved way to use non‐noble metal oxides without additives for the selective functional group reduction and coupling reactions.

Yuan, Ziliang↗
DOE OSTI2024

Chloride and Hydride Transfer as Keys to Catalytic Upcycling of Polyethylene into Liquid Alkanes

Abstract Transforming polyolefin waste into liquid alkanes through tandem cracking‐alkylation reactions catalyzed by Lewis‐acid chlorides offers an efficient route for single‐step plastic upcycling. Lewis acids in dichloromethane establish a polar environment that stabilizes carbenium ion intermediates and catalyzes hydride transfer, enabling breaking of polyethylene C−C bonds and forming C−C bonds in alkylation. Here, we show that efficient and selective deconstruction of low‐density polyethylene (LDPE) to liquid alkanes is achieved with anhydrous aluminum chloride (AlCl 3 ) and gallium chloride (GaCl 3 ). Already at 60 °C, complete LDPE conversion was achieved, while maintaining the selectivity for gasoline‐range liquid alkanes over 70 %. AlCl 3 showed an exceptional conversion rate of 5000 , surpassing other Lewis acid catalysts by two orders of magnitude. Through kinetic and mechanistic studies, we show that the rates of LDPE conversion do not correlate directly with the intrinsic strength of the Lewis acids or steric constraints that may limit the polymer to access the Lewis acid sites. Instead, the rates for the tandem processes of cracking and alkylation are primarily governed by the rates of initiation of carbenium ions and the subsequent intermolecular hydride transfer. Both jointly control the relative rates of cracking and alkylation, thereby determining the overall conversion and selectivity.

Zhang, Wei↗
DOE OSTI2024

Polysilaketals: High‐Performance Polyether‐Based Electrolytes with Tunable Disubstituted Silane Linkers

Abstract Polymer electrolytes exhibit higher energy density and improved safety in lithium‐ion batteries relative to traditionally used liquid electrolytes but are currently limited by their lower electrochemical performance. Aiming to access polymer electrolytes with competitive electrochemical properties, we developed the anionic ring‐opening polymerization (AROP) of cyclic silaketals to synthesize amorphous silicon‐containing polyether‐based electrolytes with varying substituent bulk of the general formula [OSi(R) 2 (CH 2 CH 2 O) 2 ] n (R=alkyl, phenyl). As opposed to previously reported uncontrolled polycondensation routes toward low molecular weight polysilaketals, AROP allows access to targeted molecular weights above the entanglement threshold of the polymers. The polysilaketal with the lowest steric bulk (P(OSi Me,Me ‐2EO)) exceeds the conductivity of poly(ethylene oxide) (PEO), a leading polymer electrolyte. To the best of our knowledge, this is the first solid polymer electrolyte to achieve this benchmark. Steric bulk in polysilaketals was found to impart stability and two bulkier polysilaketals, P(OSi Et,Et ‐2EO) and P(OSi Me,Ph ‐2EO), exhibited higher current fractions than PEO over a wide range of salt loadings. Moreover, the efficacy of P(OSi Et,Et ‐2EO) was competitive with that of PEO. Taken together, the tunable and competitive electrochemical properties of polysilaketals validate the systematic incorporation of silyl groups as a strategy to access high performance polymer electrolytes.

Rugh, Haley J.↗
DOE OSTI2025

Sequential Infiltration Synthesis of Cadmium Sulfide Discrete Atom Clusters

Abstract Exposure of soft material templates to alternating volatile chemical precursors can produce inorganic deposition within the permeable template (e.g. a polymer thin film) in a process akin to atomic layer deposition (ALD). While such sequential infiltration synthesis (SIS) processes have now been demonstrated for many metal oxides, we report an SIS process for a transition metal sulfide – CdS. Gas phase dimethyl cadmium and hydrogen sulfide precursors infiltrated into poly(4‐vinylpyridine) thin films result in the 3D‐nucleation of clusters consistent with a cubane‐type Cd 4 S 4 core that are variably terminated with methyl, thiol and hydroxy capping ligands. First principles models and simulation of few‐atom Cd‐based clusters are consistent with electronic and vibrational spectroscopy and grazing‐incidence total X‐ray scattering measurements of 3D‐cluster‐arrays synthesized at 80 °C. The direct synthesis of few‐atom transition metal sulfide clusters within polymer thin films will provide a versatile new route to precision architectures for light‐absorbing materials including solar energy harvesting and conversion applications.

Jayaweera, Nuwanthaka P. [Material Science Divisio↗
DOE OSTI2025

Protein–Protein Complex Stability Controls Substrate Scope in a β‐Ketoacyl‐ACP Reductase Specific for Medium Chains

Assembly-line enzymes carry out multistep synthesis of important metabolites by using acyl carrier proteins (ACPs) to shuttle intermediates along defined sequences of active sites. Despite longstanding interest in reprogramming these systems for metabolic engineering and biosynthetic chemistry, the mechanisms underlying their reaction order remain poorly understood and difficult to control. In this work, we describe a β-ketoacyl-ACP reductase from Pseudomonas putida (PpFabG4) with an unusual selectivity for medium chains and use it to explore the molecular basis of substrate specificity in enzymes that pull intermediates from fatty acid synthesis, a common route to specialized products. X-ray crystallography shows no obvious barriers to short-chain binding. Molecular simulations and supporting mutational analyses indicate that substrate preference arises instead from a weak enzyme–ACP interaction that is stabilized by medium acyl chains but not by short chains. Indeed, mutations that strengthen this interaction for PpFabG4 or weaken it for EcFabG, an Escherichia coli β-ketoacyl-ACP reductase with a broad substrate specificity, can enhance or reduce activity on short-chain substrates by over 100-fold. Our findings show how the stability of enzyme-ACP interactions can control substrate scope in promiscuous enzymes and guide the exchange of intermediates between (and within) assembly-line systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Twisted Tin‐Chloride Perovskite Single‐Crystal Heterostructures

Self-assembly affords simpler synthetic routes to heterostructures compared with manual layer-by-layer stacking, yet controlling interlayer twist angles in a bulk solid remains an outstanding challenge. We report two new single-crystal heterostructures: (Sn 2 Cl 2 )(CYS) 2 SnCl 4 (CYS = + NH 3 (CH 2 ) 2 S – ; Sn_CYS) and (Sn 2 Cl 2 )(SeCYS) 2 SnCl 4 (SeCYS = + NH 3 (CH 2 ) 2 Se – ; Sn_SeCYS) synthesized in solution, with alternating perovskite and intergrowth layers. Notably, compared to the recently reported lead analog, (Pb 2 Cl 2 )(CYS) 2 PbCl 4 (Pb_CYS), the tin heterostructures feature a twist between the perovskite and intergrowth layers. We trace this twist to local distortions at the Sn centers, which change the interfacial lattice-matching requirements compared to those of the Pb analog. Electronic band structure calculations show that the striking differences in the relative energies of perovskite- and intergrowth-derived bands in Sn_CYS and Pb_CYS arise from structural and not compositional differences. The structural anisotropy of Sn_CYS is also reflected in a large in-plane photoluminescence linear anisotropy ratio. Interfacial strain further affords differential incorporation of Pb into the perovskite and intergrowth layers of the Sn heterostructures, resulting in redshifted optical absorption onsets. Thus, we posit that local structural distortions may be exploited to manipulate the twist angle and interfacial strain in bulk heterostructures, providing a new handle for tuning the band alignments of bulk quantum-well electronic structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

A Unified Mechanism on the Formation of Acenes, Helicenes, and Phenacenes in the Gas Phase

A unified low-temperature reaction mechanism on the formation of acenes, phenacenes, and helicenes—polycyclic aromatic hydrocarbons (PAHs) that are distinct via the linear, zigzag, and ortho-condensed arrangements of fused benzene rings—is illustrated. This mechanism is mediated through a barrierless, vinylacetylene mediated gas-phase chemistry utilizing tetracene, [4]phenacene, and [4]helicene as benchmarks contesting established ideas that molecular mass growth processes to PAHs transpire at elevated temperatures. This mechanism opens up an isomer-selective route to aromatic structures involving submerged reaction barriers, resonantly stabilized free-radical intermediates, and systematic ring annulation potentially yielding molecular wires along with racemic mixtures of helicenes in deep space. Thus, connecting helicene templates to the Origins of Life ultimately changes our hypothesis on interstellar carbon chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

NaGaS 2 - an Elusive Layered Compound with Dynamic Water Absorption and Wide-Ranging Ion Exchange Properties

Most ternary sulfides belonging to the MGaS 2 structure-type have been known for many years and are well-characterized. Surprisingly, there have been no reports of the NaGaS 2 composition, which contains Na, a monovalent cation slightly larger in size than Li, found in LiGaS 2 , a compound known for its non-linear optical properties. Herein we demonstrate for the first time that the unique reversible water absorption in NaGaS 2 has resulted in its absence from the literature due to the difficulties that one encounters when characterizing this compound by SC XRD. The layered structure of this compound coupled with uniquely easy migration of water molecules between the layers allows for ion exchange with 3d and 5f metal cations. We established that some cations, e.g. Ni 2+ , facilitate exfoliation of the layers, providing a facile synthetic route to a new class of 2D chalcogenide materials and, in addition, demonstrating that NaGaS 2 can readily uptake uranyl species from aqueous solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Free-Radical Prompted Barrierless Gas-Phase Synthesis of Pentacene

A representative, low-temperature gas-phase reaction mechanism synthesizing polyacenes via ring annulation exemplified by the formation of pentacene (C 22 H 14 ) along with its benzo[ a ]tetracene isomer (C 22 H 14 ) is unraveled by probing the elementary reaction of the 2-tetracenyl radical (C 18 H 11 . ) with vinylacetylene (C 4 H 4 ). The pathway to pentacene—a prototype polyacene and a fundamental molecular building block in graphenes, fullerenes, and carbon nanotubes—is facilitated by a barrierless, vinylacetylene mediated gas-phase process thus disputing conventional hypotheses that synthesis of polycyclic aromatic hydrocarbons (PAHs) solely proceeds at elevated temperatures. This low-temperature pathway can launch isomer-selective routes to aromatic structures through submerged reaction barriers, resonantly stabilized free-radical intermediates, and methodical ring annulation in deep space eventually changing our perception about the chemistry of carbon in our universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cation Additive Enabled Rechargeable LiOH-Based Lithium–Oxygen Batteries

Lithium-oxygen (Li-O 2 ) batteries have attracted extensive research interest due to their high energy density. Other than Li 2 O 2 (a typical discharge product in Li-O 2 batteries), LiOH has proved to be electrochemically active as an alternative product. Here we report a simple strategy to achieve a reversible LiOH-based Li-O 2 battery by using a cation additive, sodium ions, to the lithium electrolyte. Without redox mediators in the cell, LiOH is detected as the sole discharge product and it charges at a low charge potential of 3.4 V. A solution-based reaction route is proposed, showing that the competing solvation environment of the catalyst and Li+ leads to LiOH precipitation at the cathode. It is critical to tune the cell chemistry of Li-O 2 batteries by designing a simple system to promote LiOH formation/decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ligand Protonation Triggers H 2 Release from a Dinickel Dihydride Complex to Give a Doubly “T”-Shaped Dinickel(I) Metallodiradical

The dinickel(II) dihydride complex (1 K ) ofapyrazolate-based compartmental ligand with b-diketiminato (nacnac) chelate arms (L - ), providing two pincer-type {N 3 } binding pockets, has been reported to readily eliminate H 2 and to serve as a masked dinickel(I) species. Discrete dinickel(I) complexes (2 Na , 2 K ) of L - are now synthesized via a direct reduction route. They feature two adjacent T-shaped metalloradicals that are antiferromagnetically coupled, giving an S = 0 ground state. The two singly occupied local d x 2 -y 2 type magnetic orbitals are oriented into the bimetallic cleft, enabling metal–metal cooperative 2 e - substrate reductions as shown by the rapid reaction with H 2 or O 2 . X-ray crystallography reveals distinctly different positions of the K + in 1 K and 2 K , suggesting a stabilizing interaction of K + with the dihydride unit in 1 K . H 2 release from 1 K is triggered by peripheral g-C protonation at the nacnac subunits, which DFT calculations show lowers the barrier for reductive H 2 elimination from the bimetallic cleft.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗