Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Lepton scattering from Ar 40 and Ti 48 in the quasielastic peak region

Neutron and proton spectral functions of 40 Ar, 40 Ca, and 48 Ti isotopes are computed using the ab initio self-consistent Green's function approach. The resulting radii and charge distributions are in good agreement with available experimental data. The spectral functions of Ar and Ti are then utilized to calculate inclusive (e,e') cross sections within a factorization scheme and are found to correctly reproduce the recent Jefferson Lab measurements. Based on these successful agreements, the weak charged and neutral current double-differential cross sections for neutrino- 40 Ar scattering are predicted in the quasielastic region. Finally, results obtained by replacing the (experimentally inaccessible) neutron spectral distribution of 40 Ar with the (experimentally accessible) proton distribution of 48 Ti are compared and the accuracy of this approximation is assessed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Parity-violating inelastic electron-proton scattering at low Q 2 above the resonance region

We report the measurement of the parity-violating asymmetry for the inelastic scattering of electrons from the proton, at $Q^2 = 0.082$ GeV$^2$ and $ W = 2.23$ GeV, above the resonance region. The result $A_{\rm Inel} = - 13.5 \pm 2.0 ({\rm stat}) \pm 3.9 ({\rm syst})$ ppm agrees with theoretical calculations, and helps to validate the modeling of the $\gamma Z$ interference structure functions $F_1^{\gamma Z}$ and $F_2^{\gamma Z}$ used in those calculations, which are also used for determination of the two-boson exchange box diagram ($\Box_{\gamma Z}$) contribution to parity-violating elastic scattering measurements. A positive parity-violating asymmetry for inclusive $\pi^-$ production was observed, as well as positive beam-normal single-spin asymmetry for scattered electrons and a negative beam-normal single-spin asymmetry for inclusive $\pi^-$ production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Measurement of R = σ L / σ T and the separated longitudinal and transverse structure functions in the nucleon-resonance region

Here we report on a detailed study of longitudinal strength in the nucleon resonance region, presenting new results from inclusive electron-proton cross sections measured at Jefferson Lab Hall C in the four-momentum transfer range 0.2 < Q 2 < 5.5 GeV 2 . The data have been used to accurately perform over 170 Rosenbluth-type longitudinal/transverse separations. The precision R = $\sigma_{L} /\sigma _{T}$ data are presented here, along with the first separate values of the inelastic structure functions F 1 and F L in this regime. The resonance longitudinal component is found to be significant. With the new data, quark-hadron duality is observed above Q 2 = 1 GeV 2 in the separated structure functions independently.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Measurement of the J/ψ photoproduction cross section over the full near-threshold kinematic region

Here, we report the total and differential cross sections for $J/\psi$ photoproduction with the large acceptance GlueX spectrometer for photon beam energies from the threshold at 8.2 GeV up to 11.44 GeV and over the full kinematic range of momentum transfer squared, $t$. Such coverage facilitates the extrapolation of the differential cross sections to the forward ($t = 0$) point beyond the physical region. The forward cross section is used by many theoretical models and plays an important role in understanding $J/\psi$ photoproduction and its relation to the $J/\psi$-proton interaction. These measurements of $J/\psi$ photoproduction near threshold are also crucial inputs to theoretical models that are used to study important aspects of the gluon structure of the proton, such as the gluon Generalized Parton Distribution (GPD) of the proton, the mass radius of the proton, and the trace anomaly contribution to the proton mass. We observe possible structures in the total cross section energy dependence and find evidence for contributions beyond gluon exchange in the differential cross section close to threshold, both of which are consistent with contributions from open-charm intermediate states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Energy dependence of fission product yields in the second-chance fission region

An extensive dataset of cumulative fission product yields has been generated under a joint collaboration between Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and the Triangle Universities Nuclear Laboratory (TUNL). The energy dependence of the cumulative yield for a select number of high-yield fission products has been measured using quasimonoenergetic neutrons with energies between 5.5 and 11.0 MeV. This is in addition to previously published data covering 0.5–4.5 and 14.8 MeV. The absolute number of fissions was determined during the irradiation period using dual-fission ionization chambers, and the fission products were measured postactivation by whole target γ-ray spectroscopy. Here this paper presents the absolute cumulative fission product yields as a function of incident neutron energy from the neutron-induced fission of 235 U, 238 U, and 239 Pu isotopes at four incident energies in the second-chance fission region and compares them with existing literature values. Corrections relevant to this collaboration's previously published data are also discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Renormalization scale setting for heavy quark pair production in $e^+e^–$ annihilation near the threshold region

Heavy fermion pair production in e + e – annihilation is a fundamental process in hadron physics and is of considerable interest for various phenomena. In this paper, we will apply the principle of maximum conformality (PMC) to provide a comprehensive analysis of these processes. The PMC provides a systematic, unambiguous method for determining the renormalization scales of the QCD coupling constant for single-scale and multiple-scale applications. The resulting predictions eliminate any renormalization scheme-and-scale ambiguities, eliminate the factorial renormalon divergences, and are consistent with the requirements of the renormalization group. It is remarkable that two distinctly different scales are determined by using the PMC for heavy fermion pair production near the threshold region. One scale is the order of the fermion mass m f , which enters the hard virtual corrections, and the other scale is of order v m f , where v is the quark velocity, which enters the Coulomb rescattering amplitude. The PMC scales yield the correct physical behavior and reflect the virtuality of the propagating gluons (photons) for the QCD (QED) processes. Moreover, we demonstrate the consistency of PMC scale setting from QCD to QED. Perfect agreement between the Abelian unambiguous Gell-Mann-Low and the PMC scale-setting methods in the limit of zero number of colors is demonstrated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Right-handed slepton bulk region for dark matter in generalized no-scale F -SU(5) with effective supernatural supersymmetry

We propose generalized no-scale supergravity, the simplest scenario for effective supernatural supersymmetry, naturally solving the supersymmetry electroweak fine-tuning problem and including natural dark matter. A light right-handed slepton bulk region is realized in F -SU(5) and the phenomenological minimal supersymmetric standard model. The bulk may be beyond the LHC reach, although it can be probed at the 1000-day LUX-ZEPLIN, Future Circular Collider at CERN, Circular Electron-Positron Collider, and Hyper-Kamiokande. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2024

Timelike meson form factors beyond the elastic region from lattice QCD

We present a calculation of the vector-isovector timelike form factors of the pion and the kaon using lattice quantum chromodynamics. We calculate two-point correlation functions with m π ∼ 280 MeV , extracting both the finite-volume spectrum and matrix elements for these states created from the vacuum by a vector current. After determining the coupled-channel π π , K K ¯ scattering amplitudes, we perform the necessary correction for the significant finite-volume effects present in the current matrix elements, leading to the timelike form factors. We find these to be dominated by the presence of the ρ resonance, and we extract its decay constant by an analytic continuation of the amplitudes to the resonance pole. In addition, the spacelike pion form factor is determined on the same lattice configurations, and a dispersive parametrization is used to simultaneously describe the spacelike and elastic timelike regions. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Energy Flux Densities near the Electron Dissipation Region in Asymmetric Magnetopause Reconnection

Magnetic reconnection is of fundamental importance to plasmas because of its role in releasing and repartitioning stored magnetic energy. Previous results suggest that this energy is predominantly released as ion enthalpy flux along the reconnection outflow. Using Magnetospheric Multiscale data we find the existence of very significant electron energy flux densities in the vicinity of the magnetopause electron dissipation region, orthogonal to the ion energy outflow. Finally, these may significantly impact models of electron transport, wave generation, and particle acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

First Measurement of Λ Electroproduction off Nuclei in the Current and Target Fragmentation Regions

Here, we report results of Λ hyperon production in semi-inclusive deep-inelastic scattering off deuterium, carbon, iron, and lead targets obtained with the CLAS detector and the Continuous Electron Beam Accelerator Facility 5.014 GeV electron beam. These results represent the first measurements of the Λ multiplicity ratio and transverse momentum broadening as a function of the energy fraction (z) in the current and target fragmentation regions. The multiplicity ratio exhibits a strong suppression at high z and an enhancement at low z. The measured transverse momentum broadening is an order of magnitude greater than that seen for light mesons. This indicates that the propagating entity interacts very strongly with the nuclear medium, which suggests that propagation of diquark configurations in the nuclear medium takes place at least part of the time, even at high z. The trends of these results are qualitatively described by the Giessen Boltzmann-Uehling-Uhlenbeck transport model, particularly for the multiplicity ratios. These observations will potentially open a new era of studies of the structure of the nucleon as well as of strange baryons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Nuclear Modification Factor of Neutral Pions in the Forward and Backward Regions in p - Pb Collisions

The nuclear modification factor of neutral pions is measured in proton-lead collisions collected at a center-of-mass energy per nucleon of 8.16 TeV with the LHCb detector. The π 0 production cross section is measured differentially in transverse momentum (p T ) for 1.5 < p Τ < 10.0 GeV and in center-of-mass pseudorapidity (η c.m. ) regions 2.5 < η c.m. < 3.5 (forward) and -4.0 < η c.m .< -3.0 (backward) defined relative to the proton beam direction. The forward measurement shows a sizable suppression of π 0 production, while the backward measurement shows the first evidence of π 0 enhancement in proton-lead collisions at the LHC. Together, these measurements provide precise constraints on models of nuclear structure and particle production in high-energy nuclear collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Experimental Determination of 𝛼 Widths of 21 Ne Levels in the Region of Astrophysical Interest: New 17 O +𝛼 Reaction Rates and Impact on the Weak 𝑠 Process

The efficiency of the weak 𝑠 process in low-metallicity rotating massive stars depends strongly on the rates of the competing 17 O ⁡(𝛼,𝑛)⁢ 20 Ne and 17 O ⁡(𝛼,𝛾)⁢ 21 Ne reactions that determine the potency of the 16 O neutron poison. Their reaction rates are poorly known in the astrophysical energy range of interest for core helium burning in massive stars because of the lack of spectroscopic information (partial widths, spin parities) for the relevant states in the compound nucleus 21 Ne . In this Letter, we report on the first experimental determination of the 𝛼-particle spectroscopic factors and partial widths of these states using the 17 O ⁡( 7 Li, 𝑡)⁢ 21 Ne 𝛼-transfer reaction. With these the 17 O ⁡(𝛼, 𝑛)⁢ 20 Ne and 17 O ⁡(𝛼, 𝛾)⁢ 21 Ne reaction rates were evaluated with uncertainties reduced by a factor more than 3 with respect to previous evaluations and the present 17 O ⁡(𝛼, 𝑛)⁢ 20 Ne reaction rate is more than 20 times larger. Finally, the present (𝛼, 𝑛)/(𝛼, 𝛾) rate ratio favors neutron recycling and suggests an enhancement of the weak 𝑠 process in the Zr-Nd region by more than 1.5 dex in metal-poor rotating massive stars.

direct reactions↗
DOE OSTI2022

Real-time streaming tomographic reconstruction with on-demand data capturing and 3D zooming to regions of interest

Complex dynamic tomographic experiments at brilliant X-ray light sources require real-time feedback on the sample changes with respect to environmental conditions, selecting representative regions of interest for high-resolution scanning, and on-demand data saving mechanisms for storing only relevant projections acquired by fast area detectors and reducing data volumes. Here the implementation details of a 3D real-time imaging monitoring instrument, with zooming to a volume of interest with easy-to-use visualization via ImageJ , a tool familiar to most beamline users, is presented. The instrument relies on optimized data flow between the detector and processing machines and is implemented on commodity computers. The instrument has been developed at beamline 2-BM of the Advanced Photon Source, where the automatic lens changing mechanism for zooming is implemented with an Optique Peter microscope. Performance tests demonstrate the ability to process more than 3 GB of projection data per second and generate real-time 3D zooming with different magnification. These new capabilities are essential for new APS Upgrade instruments such as the projection microscope under development at beamline 32-ID. The efficacy of the proposed instrument was demonstrated during an in situ tomographic experiment on ice and gas hydrate formation in porous samples.

3D zooming↗
DOE OSTI2024

Enhancing Grid Resilience during Wildfires in Socioeconomic Vulnerable Regions using Powered and Non-Powered Hydro Dams

In many regions around the world, wildfires have become a growing threat, exacerbated by factors such as climate change, droughts, and urban sprawl. These wildfires often wreak havoc on power infrastructure, leading to extended power outages, which can have devastating consequences for communities, especially in socioeconomically vulnerable areas. Ensuring grid resiliency in the face of these challenges is of paramount importance. One innovative approach to mitigating the impact of wildfires on the power grid is the utilization of hydropower facilities including both powered and non-powered hydro dams. While powered hydro dams along with additional infrastructure like energy storage and solar photovoltaic can provide resilience during wildfire-related outages, non-powered dams, originally constructed for purposes other than electricity generation, also offer a unique opportunity to bolster grid resilience. In this paper, we aim to explore the efficacy of hydro-dams in general to provide resiliency during wildfire-induced outages.

Wildfires, Resilience, Grid Resiliency, Hydropower↗
DOE OSTI2023

Real-Time Regional PV Spinning Reserve Estimator with AGC Look-Ahead Windows

Curtailed PV generation is a zero-marginal cost spinning reserve that can be used for a number of active power control services. However, unlike the traditional spinning reserve providers, i.e., fossil-fueled generators, who have well-defined operating characteristics, e.g., available headroom or potential high limit (PHL), PV plants have by nature variable and uncertain operating characteristics. To ensure the effective coordination between PV plants and the system operator during an active power control event, accurate forecasts of the PV PHL are essential. A novel reference-control grouping based scaling method has been proposed by NREL to estimate the PV PHL in real-time. This work further enhances the methodology by: 1) improving the model accuracy through machine learning; 2) considering look-ahead windows introduced by the computation and communication latencies; 3) applying the method to regional spinning reserve estimation. A significant performance improvement, over 99% of estimation error reduction, has been observed based on real-world data collected by CAISO and PV plant operators.

potential high limit↗
DOE OSTI2025

Structural Analysis of Multilayer Tapered Canted-Cosine-Theta Superconducting Magnet for the Interaction Region of Electron Ion Collider

The electron ion collider (EIC) will collide high energy and highly polarized hadron and electron beams with luminosities up to 10 34 cm -2 s -1 . The magnet designs at the interaction region (IR) are challenging due to the close proximity of the hadron and electron beams. A canted cosine theta (CCT) quadrupole magnet was designed due to the space restrictions at the IR. The CCT magnet has a tapered aperture, which allows higher gradients at the interaction point (IP) side of the magnet. The tapered geometry makes the magnet not symmetrical along the axial direction. In conclusion, to validate the design in terms of the mechanical strength and the allowed deformations, a detailed structural mechanical analysis for the tapered CCT quadrupole magnet has been carried out using the finite element method (FEM) considering both the shrinking due to cool down and the electromagnetic force on the conductors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Design and Construction of a Prototype B1pF Large Aperture Rutherford Cable Superconducting Magnet for the EIC Interaction Region

Brookhaven National Laboratory (BNL) was chosen to host the international Electron-Ion Collider (EIC), which will collide high energy and highly polarized hadron and electron beams with a center of mass energy up to 140 GeV. The Interaction Region (IR) requires several large aperture, relatively high field superconducting dipole and quadrupole magnets, some of which are very closely spaced. B1pF is a large aperture (300 mm coil ID), medium field (4.2 T), 3 meter long superconducting dipole magnet. Its size is larger than the largest superconducting magnet in the RHIC accelerator (180 mm DX dipole, 4.2 T, 3.7 m long). As such, B1pF was chosen as the representative magnet to be prototyped to demonstrate the technological choice, design and construction details. Here, this paper describes the analyses and considerations which informed both the magnet and magnet tooling designs. This paper will summarize the construction results so far, in particular the plan for novel coil winding tooling and the test coil winding & curing program that was carried out prior to coil and magnet construction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Serpentine Magnet Designs for the Interaction Region of the Electron-Ion Collider (EIC)

The Electron-Ion Collider (EIC), hosted by Brookhaven National Laboratory, is designed to deliver a peak luminosity of 1 × 10 34 cm −2 sec −1 . The interaction region (IR) of the EIC imposes several constraints in terms of field quality, aperture, and spatial layout, which necessitates the development of several unique superconducting serpentine direct wind magnets. These magnets are constructed using either a single strand or a small-diameter 6-around-1 NbTi cable, presenting unique challenges for design and optimization. This paper introduces a new computational code specifically developed to streamline and integrate the design process for these magnets, enabling faster design iterations while addressing their complex requirements. Here, in this paper, we first introduce the code, which builds on established electromagnetic fundamentals. The code incorporates tools for optimizing winding patterns and for correcting magnetic multipoles; additionally, it interfaces with established magnet design software. We also present the design of several serpentine magnets for the EIC IR, demonstrating the code’s capability to deliver precise and efficient solutions. These designs highlight the code’s ability to accelerate the development cycle, ensuring the serpentine magnets meet the demanding specifications of the EIC project.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗