Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radar methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Remotely sensing wheat maturation with radar

The scattering properties of wheat were studied in the 8-18 GHz band as a function of frequency, polarization, incidence angle, and crop maturity. Supporting ground truth was collected at the time of measurement. The data indicate that the radar backscattering coefficient is sensitive to both radar system parameters and crop characteristics particularly at incidence angles near nadir. Linear regression analyses of the radar backscattering coefficient on both time and plant moisture content result in rather good correlation. Furthermore, by calculating the average time rate of change of the radar backscattering coefficient it is found that it undergoes rapid variations shortly before and after the wheat is harvested. Both of these analyses suggest methods for estimating wheat maturity and for monitoring the progress of harvest.

Bush, T. F.↗
NASA NTRS1982

Ionospheric correction for Seasat altimeter height measurement

Descriptions are given of the Faraday rotation technique used by Seasat to measure the ionosphere and the scheme employed in mapping the measurements to the spacecraft location, exploiting the fact that the effect of the ionosphere on signal speed, and therefore on Seasat radar altimeter measurements, is directly proportional to the columnar electron content of the ionosphere. The altimeter ionosphere correction is evaluated through comparison with independent methods, and it is demonstrated that the correction, whose total value can be on the order of 20 cm, is accurate to the 3-5 cm level.

Lorell, J.↗
NASA NTRS1988

An application of the WKBJ technique to the on-surface radiation condition

The on-surface radiation-condition method and the WKBJ method for approximating solutions to differential equations are used to derive an analytic formula for the surface currents on a two-dimensional perfectly conducting convex target. The currents are induced by an incident TE-polarized plane wave. The case of a circular cylinder is used to demonstrate the usefulness of the combined methods. It is shown that a two-term expansion yields good results for the surface currents and excellent results for the ensuing bistatic radar cross section.

Moore, Thomas G.↗
NASA NTRS1989

A laboratory investigation into microwave backscattering from sea ice

The sources of scattering of artificial sea ice were determined, backscatter measurements semi-quantitatively were compared with theoretical predictions, and inexpensive polarimetric radars were developed for sea ice backscatter studies. A brief review of the dielectric properties of sea ice and of commonly used surface and volume scattering theories is presented. A description is provided of the backscatter measurements performed and experimental techniques used. The development of inexpensive short-range polarimetric radars is discussed. The steps taken to add polarimetric capability to a simple FM-W radar are considered as are sample polarimetric phase measurements of the radar. Ice surface characterization data and techniques are discussed, including computation of surface rms height and correlation length and air bubble distribution statistics. A method is also presented of estimating the standard deviation of rms height and correlation length for cases of few data points. Comparisons were made of backscatter measurements and theory. It was determined that backscatter from an extremely smooth saline ice surface at C band cannot be attributed only to surface scatter. It was found that snow cover had a significant influence on backscatter from extremely smooth saline ice at C band.

Bredow, Jonathan W.↗
NASA NTRS1989

Polarization filtering of SAR data

A theoretical analysis of polarization filtering for the bistatic case is developed for optimum discrimination between two types of targets. The resulting method is half analytical and half numerical. Because it is based on the Stokes matrix representation, the targets of interest can be extended targets. The scattered field from such targets is partially polarized. This method is then applied to the monostatic case with numerical examples relying on the JPL (Jet Propulsion Laboratory) full-polarimetric L-band radar data. A matched filter to maximize the power ratio between urban and natural targets is developed. The results show that the same filter is optimal for both ocean and forest targets as natural targets.

Dubois, Pascale C.↗
NASA NTRS1992

LOP - Long-Term Orbit Predictor

Long-Term Orbit Preditor (LOP) trajectory-propagation computer program is useful tool in analysis of lifetime of orbiting spacecraft. Suitable for studying planetary-orbit missions with reconnaissance (flyby) and exploratory (mapping) trajectories. Includes sample data for study of drift cycle of geosynchronous station, strategy for radar mapping of Venus, frozen orbit about Mars, and orbit characterized by repeating ground trace. Executed faster than such programs based on Cowell's method. Written in FORTRAN 77.

Kwok, Johnny H.↗
NASA NTRS1991

Time domain scattering and radar cross section calculations for a thin, coated perfectly conducting plate

Radar cross section (RCS) calculations for flat, perfectly conducting plates are readily available through the use of conventional frequency domain techniques such as the Method of Moments (MOM). However, if the plate is covered with a dielectric material that is relatively thick in comparison with the wavelength in the material, these frequency domain techniques become increasingly difficult to apply. We present the application of the Finite Difference Time Domain (FDTD) Technique to the problem of electromagnetic scattering and RCS calculations from a thin, perfectly conducting plate that is coated with a thick layer of lossless dielectric material. Both time domain and RCS calculations are presented and disclosed.

Luebbers, Raymond J.↗
NASA NTRS1991

Conical cut radar cross section calculations for a thin, perfectly conducting plate

Radar Cross Section (RCS) calculations for flat, perfectly conducting plates are readily available through the use of conventional frequency domain techniques such as the Method of Moments. However, if time domain scattering or wideband frequency domain results are desired, then the Finite Difference Time Domain (FDTD) technique is a suitable choice. In this paper, we present the application of the Finite Difference Time Domain (FDTD) technique to the problem of electromagnetic scattering and RCS calculations from a thin, perfectly conducting plate for a conical cut in the scattering angle phi. RCS calculations versus angle phi will be presented and discussed.

Luebbers, Raymond J.↗
NASA NTRS1991

Conical cut radar cross section calculations for a thin, perfectly conducting plate

Radar cross section (RCS) calculations for flat, perfectly conducting plates are readily available through the use of conventional frequency domain techniques such as the method of moments. However, if time domain scattering or wideband frequency domain results are desired, then the finite difference time domain (FDTD) technique is a suitable choice. We present the application of the FDTD technique to the problem of electromagnetic scattering and RCS calculations from a thin, perfectly conducting plate for a conical cut in the scattering angle phi. RCS calculations versus angle phi are presented and discussed.

Luebbers, Raymond J.↗
NASA NTRS1991

Time domain scattering and radar cross section calculations for a thin, coated perfectly conducting plate

Radar cross section (RCS) calculations for flat, perfectly conducting plates are readily available through the use of conventional frequency domain techniques such as the Method of Moments (MOM). However, if the plate is covered with a dielectric material that is relatively thick in comparison with the wavelength in the material, these frequency domain techniques become increasingly difficult to apply. The application is presented of the Finite Difference Time Domain (FDTD) technique to the problem of electromagnetic scattering and RCS calculations from a thin, perfectly conducting plate that is coated with a thick layer of lossless dielectric material. Both time domain and RCS calculations are presented and discussed.

Luebbers, Raymond J.↗
NASA NTRS1994

Estimation of the rain signal in the presence of large surface clutter

The principal limitation for the use of a spaceborne imaging SAR as a rain radar is the surface-clutter problem. Signals may be estimated in the presence of noise by averaging large numbers of independent samples. This method was applied to obtain an estimate of the rain echo by averaging a set of N(sub c) samples of the clutter in a separate measurement and subtracting the clutter estimate from the combined estimate. The number of samples required for successful estimation (within 10-20%) for off-vertical angles of incidence appears to be prohibitively large. However, by appropriately degrading the resolution in both range and azimuth, the required number of samples can be obtained. For vertical incidence, the number of samples required for successful estimation is reasonable. In estimating the clutter it was assumed that the surface echo is the same outside the rain volume as it is within the rain volume. This may be true for the forest echo, but for convective storms over the ocean the surface echo outside the rain volume is very different from that within. It is suggested that the experiment be performed with vertical incidence over forest to overcome this limitation.

Ahamad, Atiq↗
NASA NTRS1995

User's manual for CBS3DS, version 1.0

CBS3DS is a computer code written in FORTRAN 77 to compute the backscattering radar cross section of cavity backed apertures in infinite ground plane and slots in thick infinite ground plane. CBS3DS implements the hybrid Finite Element Method (FEM) and Method of Moments (MoM) techniques. This code uses the tetrahedral elements, with vector edge basis functions for FEM in the volume of the cavity/slot and the triangular elements with the basis functions for MoM at the apertures. By virtue of FEM, this code can handle any arbitrarily shaped three-dimensional cavities filled with inhomogeneous lossy materials; due to MoM, the apertures can be of any arbitrary shape. The User's Manual is written to make the user acquainted with the operation of the code. The user is assumed to be familiar with the FORTRAN 77 language and the operating environment of the computer the code is intended to run.

Reddy, C. J.↗
NASA NTRS1999

Ice Flow in the North East Greenland Ice Stream

Early observations with ERS-1 SAR image data revealed a large ice stream in North East Greenland (Fahnestock 1993). The ice stream has a number of the characteristics of the more closely studied ice streams in Antarctica, including its large size and gross geometry. The onset of rapid flow close to the ice divide and the evolution of its flow pattern, however, make this ice stream unique. These features can be seen in the balance velocities for the ice stream (Joughin 1997) and its outlets. The ice stream is identifiable for more than 700 km, making it much longer than any other flow feature in Greenland. Our research goals are to gain a greater understanding of the ice flow in the northeast Greenland ice stream and its outlet glaciers in order to assess their impact on the past, present, and future mass balance of the ice sheet. We will accomplish these goals using a combination of remotely sensed data and ice sheet models. We are using satellite radar interferometry data to produce a complete maps of velocity and topography over the entire ice stream. We are in the process of developing methods to use these data in conjunction with existing ice sheet models similar to those that have been used to improve understanding of the mechanics of flow in Antarctic ice streams.

Joughin, Ian↗
NASA NTRS2002

Characteristics of Vertical Profiles of Reflectivity and Doppler Derived From TRMM Field Campaigns

The TRMM Precipitation Radar (PR) measures the vertical profile of reflectivity from which the surface rain rate is estimated after attenuation corrections in the 2A21 algorithm. Characteristics of the vertical reflectivity profile is important for various reasons ranging from scientific to instrument algorithms. It is well known that different types of precipitation such as stratiform or convection, have different heating profiles. The vertical profile of reflectivity can provide information on precipitation classification. The vertical reflectivity structure also provides information on precipitation processes such as growth and aggregation. In terms of TRMM algorithms, an independent estimate of the vertical profiles are also extremely important since the PR returns can be attenuated in the rain layer near the surface. Corrections for attenuation are required in the lowest few kilometers, necessitating some assumptions about the rain size distributions and the reflectivity profile below the lowest measurement unaffected by the surface return. Furthermore, some assumptions about the vertical reflectivity profile are required for Ground Validation (GV) radars, since their lowest scan may be 1 or more kilometers above the surface. Statistics on the vertical reflectivity and Doppler structure are presented from the ER-2 Doppler Radar (EDOP) which participated in several TRMM field campaigns (TEFLUN-A, TEFLUN-B, and LBA) and CAMEX-3. The ER-2 aircraft overflew diverse precipitation types during these campaigns. EDOP is an X-band (9.6 GHz) radar for which returns are less attenuated than at the TRMM PR frequency. The EDOP profiles are first corrected for attenuation using the SRT method. The data from all the ER-2 campaigns are then classified by type (convection, stratiform, and other) and then statistics were performed on the vertical reflectivity and Doppler profiles in the form of CFAD's. These CFADs are compared and discussed. The computed CFAD's indicate significant differences as a function of precipitation type and location (hurricane versus non-hurricane, Brazil versus Florida). The implications of these profiles will be discussed.

Starr, David OC.↗
NASA NTRS2003

Uniting Space, Ground and Underwater Measurements for Improved Estimates of Rain Rate

Global precipitation is monitored from a variety of platforms including space-borne, ground- and ocean-based platforms. Intercomparisons of these observations are crucial to validating the measurements and providing confidence for each measurement technique. Probability distribution functions of rain rates are used to compare satellite and ground-based radar observations. A preferred adjustment technique for improving rain rate distribution estimates is identified using measurements from ground-based radar and radar and rain gauges within the coverage area of the radar. The underwater measurement of rainfall shows similarities to radar measurements, but with intermediate spatial resolution and high temporal resolution. Reconciling these different measurement techniques provides understanding and confidence for all of the methods.

Amitai, E.↗
NASA NTRS2011

Optimal Asteroid Mass Determination from Planetary Range Observations: A Study of a Simplified Test Model

Mars ranging observations are available over the past 10 years with an accuracy of a few meters. Such precise measurements of the Earth-Mars distance provide valuable constraints on the masses of the asteroids perturbing both planets. Today more than 30 asteroid masses have thus been estimated from planetary ranging data (see [1] and [2]). Obtaining unbiased mass estimations is nevertheless difficult. Various systematic errors can be introduced by imperfect reduction of spacecraft tracking observations to planetary ranging data. The large number of asteroids and the limited a priori knowledge of their masses is also an obstacle for parameter selection. Fitting in a model a mass of a negligible perturber, or on the contrary omitting a significant perturber, will induce important bias in determined asteroid masses. In this communication, we investigate a simplified version of the mass determination problem. Instead of planetary ranging observations from spacecraft or radar data, we consider synthetic ranging observations generated with the INPOP [2] ephemeris for a test model containing ~25000 asteroids. We then suggest a method for optimal parameter selection and estimation in this simplified framework.

asteroids↗
NASA NTRS2017

Meteor Shower Forecasting for Spacecraft Operations

Although sporadic meteoroids are a much greater hazard to spacecraft than shower meteoroids in general, meteor showers can significantly increase the risk of damage over short time periods. Because showers are brief, it is sometimes possible to mitigate the risk operationally, which requires accurate predictions of shower activity. NASA's Meteoroid Environment Office generates an annual meteor shower forecast that describes the variations in the near-Earth meteoroid flux produced by meteor showers, which presents the shower flux both in absolute terms and relative to the sporadic ux. The shower forecast incorporates model predictions of annual variations in shower activity and quotes fluxes to several limiting particle kinetic energies. In this work, we describe our forecasting methods, compare them to actual observations, and highlight recent improvements to the temporal pro les based on flux measurements from the Canadian Meteor Orbit Radar (CMOR).

Moorhead, Althea V.↗
NASA NTRS2021

Southwest Water Resources: Monitoring Surface Water Extents of Remote Stock Ponds in the Southwestern United States Using Earth Observing Systems for Enhanced Water Resources Management

Due to increasingly frequent and severe drought conditions in the southwestern US, land managers and livestock producers need to monitor stock ponds with increasing regularity. The ability to assess stock pond water levels with Earth observing satellite systems would enhance monitoring efforts of partners at the US Forest Service, Arizona Department of Game and Fish, and the Diablo Trust. This study employed Landsat 8 Operational Land Imager (OLI), Sentinel-1 C-band Synthetic Aperture Radar (C-SAR), and Sentinel-2 Multispectral Instrument (MSI) to monitor surface water extent for hundreds of critical stock ponds in Arizona. Using methods adapted from previously developed image processing workflows, this project conducted a time-series analysis to capture seasonal and interannual variations in surface water area between 2013 to 2021. In addition, end users can monitor the surface water extent of stock ponds through the developed Google Earth Engine software tool called Surface Water Identification and Forecasting Tool (SWIFT). SWIFT incorporates the Automated Water Extraction Index, Modified Normalized Difference Water Index, and Tasseled Cap-Wetness Index for optical imagery and the incidence angle, VV and VH polarization bands for Sentinel-1 imagery to detect small water bodies in the study area with an overall accuracy range of 88-93%. These tools will empower our partners to monitor the extents of water in their stock ponds remotely, enabling them to develop data-informed and sustainable management solutions for decades to come.

Rainey Aberle↗