Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “product development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Recent developments in high purity niobium metal production at CBMM

CBMM is a global supplier of high quality niobium products including pure niobium, the focus of this paper. CBMM’s position has been consolidated over three decades of producing high purity niobium metal ingots. The company supplies, among other products, commercial and reactor grade niobium ingots. One of the main uses of CBMM’s ingots is for the manufacture of particle accelerators (superconducting radio frequency – SRF – cavities), where the purity and homogeneity of niobium metal is essentially important for good performance. CBMM constantly strives to improve process controls and product quality, and is currently implementing innovations in production, research and development to further improve ingot quality. The main aim is to reduce the content of interstitial elements, such as nitrogen (N), oxygen (O), carbon (C), and hydrogen (H), starting with the raw materials through the final step of ingot production. CBMM held the first trial to produce the world’s largest-diameter niobium ingot (as cast 535 mm). The results of this initial trial presented very low levels of interstitial impurities (N, O, C, H), allowing the achievement of residual resistivity ratio (RRR) values very close to 300 in a six-melt process in an electron beam furnace. These values were reached with 850 ppm of tantalum. SRF cavities will be produced with this material in order to study the effect of low impurities and high RRR on the Q factor and accelerating gradient.

43 PARTICLE ACCELERATORS↗

Lessons learned in deploying software estimation technology and tools

Developing a software product involves estimating various project parameters. This is typically done in the planning stages of the project when there is much uncertainty and very little information. Coming up with accurate estimates of effort, cost, schedule, and reliability is a critical problem faced by all software project managers. The use of estimation models and commercially available tools in conjunction with the best bottom-up estimates of software-development experts enhances the ability of a product development group to derive reasonable estimates of important project parameters. This paper describes the experience of the IBM Software Solutions (SWS) Toronto Laboratory in selecting software estimation models and tools and deploying their use to the laboratory's product development groups. It introduces the SLIM and COSTAR products, the software estimation tools selected for deployment to the product areas, and discusses the rationale for their selection. The paper also describes the mechanisms used for technology injection and tool deployment, and concludes with a discussion of important lessons learned in the technology and tool insertion process.

Panlilio-Yap, Nikki↗

Metabolic Engineering of Oleaginous Yeasts for Fatty Alcohol Production

To develop pathways for advanced biological upgrading of sugars to hydrocarbons, we are seeking biological approaches to produce high carbon efficiency intermediates amenable to separations and catalytic upgrading to hydrocarbon fuels. In this study, we successfully demonstrated fatty alcohol production by oleaginous yeasts Yarrowia lipolytica and Lipomyces starkeyi by expressing a bacteria-derived fatty acyl-CoA reductase (FAR). Moreover, we find higher extracellular distribution of fatty alcohols produced by FAR-expressing L. starkeyi strain as compared to Y. lipolytica strain, which would benefit the downstream product recovery process. In both oleaginous yeasts, long chain length saturated fatty alcohols were predominant, accounting for more than 85% of the total fatty alcohols produced. To the best of our knowledge, this is the first report of fatty alcohol production in L. starkeyi. Taken together, our work demonstrates that in addition to Y. lipolytica, L. starkeyi can also serve as a platform organism for production of fatty acid-derived biofuels and bioproducts via metabolic engineering. We believe strain and process development both will significantly contribute to our goal of producing scalable and cost-effective fatty alcohols from renewable biomass.

09 BIOMASS FUELS↗

Regional Geology Capstone Report for the Midwestern Regional Carbon Sequestration Partnership (Volume V)

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. The MRCSP regional geology Capstone report summarizes the regional characterization of geologic storage subtasks performed under MRCSP Phase III. The regional characterization work was completed by the state geological surveys of Delaware, Indiana, Kentucky, Maryland, New York, Ohio, Pennsylvania, and West Virginia along with Western Michigan University and Rutgers University. Building on the Phases I and II, the Phase III research was focused on key research topics identified in previous MRCSP efforts: [1] Regional Geologic Cross Sections for Potential Storage and Containment Zones; [2] Appalachian Basin: Enhanced Recovery Opportunities; [3] Michigan Basin: Assessment of Enhanced Oil Recovery Using Carbon Dioxide in Silurian Pinnacle Reefs; [4] Mid-Atlantic Coastal Plain and Adjacent Offshore Region: Characterization of Carbon Storage Targets; [5] Ordovician-Cambrian Units: Hierarchical Evaluation of Geologic Carbon Storage Resource Estimates; [6] Upper Silurian to Middle Devonian Strata of Ohio: Structural Characterization of Potential CO 2 Reservoirs and Adjacent Strata; [7] Triassic Rift Basins: Preliminary Study of Long-Term CO 2 Storage Potential Together, the regional characterization effort developed useful products to support project developers, policy makers and other stakeholders in the MRCSP region seeking to understand where potential storage exists relative to large stationary sources of CO 2 emissions.

01 COAL, LIGNITE, AND PEAT↗

Charged particle and magnetic field research in space

Research completed and in progress is described, related publications and reports are listed, and abstracts of papers and talks on results of the research are given. The charged particle research centered on OGO-5 and OGO-6 electron spectrometer data, and theoretical radiation belt studies. Work on the ATS-1 magnetometer project included development of production data reduction programs, development of spectral analysis procedures, and scientific studies of ULF waves at synchronous orbit. The magnetic fields research also included work on the Mariner project and theoretical studies on the solar wind.

Source record↗

Middle management of research

The role of the middle manager in a research organization is discussed. The middle manager serves as a liaison between upper management and researchers to assure that individual research projects manifest the goals of the organization. The author draws on his long experience in this role to describe management practices that have proven successful. A general discussion is presented of the makeup of a research environment, derived from a study of a division involved in aerospace research and development (R and D). The study emphasized the importance of planning and management style in producing an attractive environment. Management practices are described, which include goal setting, planning, staffing, reviewing and evaluating, and rewarding. The importance of selecting and defining an appropriate research area is discussed. It is emphasized that in relating to the staff the middle manager must cultivate the human side of supervision, develop the art of delegating responsibility, judiciously select facilities, and provide recognition and meaningful rewards to develop a productive research staff. The development of the staff is probably the most important and challenging role of the manager.

Graham, Robert W.↗

TOPEX/Poseidon precision orbit determination production and expert system

TOPEX/Poseidon (T/P) is a joint mission between NASA and the Centre National d'Etudes Spatiales (CNES), the French Space Agency. The TOPEX/Poseidon Precision Orbit Determination Production System (PODPS) was developed at Goddard Space Flight Center (NASA/GSFC) to produce the absolute orbital reference required to support the fundamental ocean science goals of this satellite altimeter mission within NASA. The orbital trajectory for T/P is required to have a RMS accuracy of 13 centimeters in its radial component. This requirement is based on the effective use of the satellite altimetry for the isolation of absolute long-wavelength ocean topography important for monitoring global changes in the ocean circulation system. This orbit modeling requirement is at an unprecedented accuracy level for this type of satellite. In order to routinely produce and evaluate these orbits, GSFC has developed a production and supporting expert system. The PODPS is a menu driven system allowing routine importation and processing of tracking data for orbit determination, and an evaluation of the quality of the orbit so produced through a progressive series of tests. Phase 1 of the expert system grades the orbit and displays test results. Later phases undergoing implementation, will prescribe corrective actions when unsatisfactory results are seen. This paper describes the design and implementation of this orbit determination production system and the basis for its orbit accuracy assessment within the expert system.

Putney, Barbara↗

Near infrared spectral imaging of explosives using a tunable laser source

Diffuse reflectance near infrared hyperspectral imaging is an important analytical tool for a wide variety of industries, including agriculture consumer products, chemical and pharmaceutical development and production. Using this technique as a method for the standoff detection of explosive particles is presented and discussed. The detection of the particles is based on the diffuse reflectance of light from the particle in the near infrared wavelength range where CH, NH, OH vibrational overtones and combination bands are prominent. The imaging system is a NIR focal plane array camera with a tunable OPO/laser system as the illumination source. The OPO is programmed to scan over a wide spectral range in the NIR and the camera is synchronized to record the light reflected from the target for each wavelength. The spectral resolution of this system is significantly higher than that of hyperspectral systems that incorporate filters or dispersive elements. The data acquisition is very fast and the entire hyperspectral cube can be collected in seconds. A comparison of data collected with the OPO system to data obtained with a broadband light source with LCTF filters is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temporal nitrogen dynamics in intensively managed loblolly pine early stand development

Forest production is strongly dependent on nutrient uptake; however, sustainable management of intensively managed plantations requires an improved understanding of this relationship when fertilization occurs frequently across short rotations. Here, we studied temporal nitrogen (N) concentration ([N]) and content (Nc) dynamics under different silvicultural practices (herbicide, fertilization, and planting density) throughout early loblolly pine (Pinus taeda) stand development (5 years). We describe relationships of [N] and Nc of different stand components (foliage, branches, stem, roots, and competing vegetation) with carbon and biomass. Our results demonstrate that [N] of perennial loblolly tissues do not respond to silvicultural practices and progressively decrease through development. While foliar [N] was most responsive to resource availability, it was not consistent across time. Controlling competing vegetation was crucial to promote the use of site resources by the crop tree and increased loblolly Nc by >500%. However, increased N uptake and expedited growth is dependent upon fertilization early in stand development. At age 5, herbicide plus reduced and full fertilization rates exhibited similar aboveground Nc, which was 32% higher than with herbicide only. Increasing planting density resulted in increased above- and belowground loblolly Nc; however, increases in Nc were not proportional with increases in planting density. Net primary productivity and N uptake were linearly related, but age/development strongly controlled N use efficiency. Our study helps to understand complex relationships between N, biomass, and silvicultural practices during early stand development and demonstrates that temporal evaluation of nutrient dynamics is crucial to better understand loblolly pine growth, carbon sequestration potential, and to inform sustainable silvicultural practices across short rotations.

54 ENVIRONMENTAL SCIENCES↗

Managing Plant Microbiomes for Sustainable Biofuel Production

The development of environmentally sustainable, economical, and reliable sources of energy is one of the great challenges of the 21st century. Large-scale cultivation of cellulosic feedstock crops (henceforth, bioenergy crops) is considered one of the most promising renewable sources for liquid transportation fuels. However, the mandate to develop a viable cellulosic bioenergy industry is accompanied by an equally urgent mandate to deliver not only cheap reliable biomass but also ecosystem benefits, including efficient use of water, nitrogen, and phosphorous; restored soil health; and net negative carbon emissions. Thus, sustainable bioenergy crop production may involve new agricultural practices or feedstocks and should be reliable, cost effective, and minimal input, without displacing crops currently grown for food production on fertile land. In this editorial perspective for the Phytobiomes Journal Focus Issue on Phytobiomes of Bioenergy Crops and Agroecosystems, we consider the microbiomes associated with bioenergy crops, the effects beneficial microbes have on their hosts, and potential ecosystem impacts of these interactions. We also address outstanding questions, major advances, and emerging biotechnological strategies to design and manipulate bioenergy crop microbiomes. This approach could simultaneously increase crop yields and provide important ecosystem services for a sustainable energy future.

09 BIOMASS FUELS↗

Development of a sensor for polypropylene degradation products.

This paper presents the development of a sensor to detect the oxidative and radiation induced degradation of polypropylene. Recently we have examined the use of crosslinked assemblies of nanoparticles as a chemiresistor-type sensor for the degradation products. We have developed a simple method that uses a siloxane matrix to fabricate a chemiresistor-type sensor that minimizes the swelling transduction mechanism while optimizing the change in dielectric response. These sensors were exposed with the use of a gas chromatography system to three previously identified polypropylene degradation products including 4-methyl-2-pentanone, acetone, and 2-pentanone. The limits of detection 210 ppb for 4-methy-2-pentanone, 575 ppb for 2-pentanone, and the LoD was unable to be determined for acetone due to incomplete separation from the carbon disulfide carrier.

36 MATERIALS SCIENCE↗

Incorporation of Viral RNA Elements for Increased mRNA Stability Within Mammalian Cells to Prolong Nanobody Production

The development of protein-based pharmaceuticals has taken place for years, often finding roadblocks relevant to in vitro biomanufacturing, drug delivery, and drug half-life. Industrial and national laboratory focus has now shifted to messenger RNA (mRNA)-based pharmaceuticals, as mRNA can be manufactured and delivered more easily, and can lead to direct intracellular protein production. Artificial stabilization of the naturally transient mRNA is needed to prolong protein production by recipient cells. Incorporation of viral genome elements known as exoribonuclease-resistant RNA (xrRNA) should allow for this stabilization. To evaluate the effects of xrRNA on mRNA stability, fluorescent proteins are encoded within the mRNA of interest for easier detection through immunocytochemistry, microplate reader screening, and high-content confocal microscopy. As seen with the Pfizer and Moderna COVID 19 vaccines, mRNA-based medical countermeasures can be powerful tools in service of public health and biodefense, and our work to improve mRNA stability should further enhance this promising new approach to medicine.

59 BASIC BIOLOGICAL SCIENCES↗

Application of high-resolution time-of-flight chemical ionization mass spectrometry measurements to estimate volatility distributions of α-pinene and naphthalene oxidation products

Recent developments in high-resolution time-of-flight chemical ionization mass spectrometry (HR-ToF-CIMS) have made it possible to directly detect atmospheric organic compounds in real time with high sensitivity and with little or no fragmentation, including low-volatility, highly oxygenated organic vapors that are precursors to secondary organic aerosol formation. Here, using ions identified by high-resolution spectra from an HR-ToF-CIMS with acetate reagent ion chemistry, we develop an algorithm to estimate the vapor pressures of measured organic acids. The algorithm uses identified ion formulas and calculated double bond equivalencies, information unavailable in quadrupole CIMS technology, as constraints for the number of possible oxygen-containing functional groups. The algorithm is tested with acetate chemical ionization mass spectrometry (acetate-CIMS) spectra of O 3 and OH oxidation products of α-pinene and naphthalene formed in a flow reactor with integrated OH exposures ranged from 1.2 × 10 11 to 9.7 × 10 11 molec s cm −3 , corresponding to approximately 1.0 to 7.5 days of equivalent atmospheric oxidation. Measured gas-phase organic acids are similar to those previously observed in environmental chamber studies. For both precursors, we find that acetate-CIMS spectra capture both functionalization (oxygen addition) and fragmentation (carbon loss) as a function of OH exposure. The level of fragmentation is observed to increase with increased oxidation. The predicted condensed-phase secondary organic aerosol (SOA) average acid yields and O/C and H/C ratios agree within uncertainties with previous chamber and flow reactor measurements and ambient CIMS results. While acetate reagent ion chemistry is used to selectively measure organic acids, in principle this method can be applied to additional reagent ion chemistries depending on the application.

54 ENVIRONMENTAL SCIENCES↗

Orthogonal decomposition as a design tool: With application to a mixing impeller

Digital manufacturing eliminates the expense and time required to develop custom products. By utilizing this technology, designers can quickly create a customized product specifically for their performance needs. But the timescale and expense from the engineering design workflows used to develop these customized products have not been adapted from the workflows used in mass production. In many cases these customized designs build upon already successful mass-produced products that were developed using conventional engineering design workflows. Many times as part of this conventional design process significant time is spent creating and validating high fidelity models that accurately predict the performance of the final design. These existing validated high fidelity models used for the mass-produced design can be reused for analysis and design of unknown products. This thesis explores the integration of reduced order modeling and detailed analysis into the engineering design workflow developing a customized design using digital manufacturing. Specifically, detailed analysis is coupled with proper orthogonal decomposition to enable the exploration of the design space while simultaneously shaping the model representing the design. This revised workflow is examined using the design of a laboratory scale overhead mixer impeller. The case study presented here is compared with the design of the Kar Dynamic Mixer impeller developed by The Dow Chemical Company. The result of which is a customized design for a refined set of operating conditions with improved performance.

20 FOSSIL-FUELED POWER PLANTS↗

Development of Innovative Radioactive Isotope Production Techniques at the Pennsylvania State University Radiation Science and Engineering Center

The Penn State Breazeale Nuclear Reactor (PSBR) at the Radiation Science and Engineering Center (RSEC) has produced radioisotopes for research and commercial purposes since 1956. With the rebirth of the radiochemistry education and research program at the RSEC, the Center stands poised to produce a variety of radioisotopes for research and industrial work that is in line with the mission of the DOE Office of Science, Office of Nuclear Physics, Isotope Development and Production Research and Application Program. The RSEC received funding from the Office of Science in 2010 to improve production techniques and develop new capabilities. Under this program, we improved our existing techniques to provide four radioisotopes (Mn-56, Br-82, Na-24, and Ar-41) to researchers and industry in a safe and efficient manner. The RSEC is also working to develop new innovative techniques to provide isotopes in short supply to researchers and others in the scientific community, specifically Cu-64 and Cu-67. Improving our existing radioisotopes production techniques and investigating new and innovative methods are two of the main initiatives of the radiochemistry research program at the RSEC.

07 ISOTOPE AND RADIATION SOURCES↗

Spinoff from Space Fuel

In 1963, under contract with NASA, Air Products and Chemicals, Inc. built a 32 1/2 ton-a-day plant to meet the soaring demand for liquid hydrogen created by the Apollo missions and J-2 ground testing. Air Product's experience in government research, development and production of liquid hydrogen served as the springboard for a broad variety of practical, Earth-use applications. Today, liquid hydrogen is widely used among many industries including petroleum refineries in gasoline production and chemical and pharmaceutical firms in the manufacturing of fertilizers and drugs. New commercial applications are growing at the rate of about ten percent per year. Input from government research, Air Product's own technology development, and the large space program requirements combined to make the company the prime manufacturer of liquid hydrogen and enabled them to add a new 30-ton plant near New Orleans.

Source record↗

Integrated Use of Maize Bran Residue for One-Step Phosphate Bio-Fertilizer Production

The development of bio-fertilizer inoculants is important and desirable. Two phosphate-solubilizing Bacillus subtilis strains were inoculated onto maize bran residue (MBR), which was used as bio-fertilizer carrier and a primary source of nutrients in a medium used for semi-solid fermentation. Water holding capacity, swelling capacity, scanning electron microscopy, and shelf-life assays demonstrated that ground MBR had satisfactory properties for a bio-fertilizer carrier. The maximal soluble phosphorus (P) reached 642.7 ± 0.43 mg l{sup −1} in an orthogonal test under the following optimal conditions: a pH of 7.0, a cultivation temperature of 31 °C, a medium water content of 160%, and a filling capacity of 500 g l{sup −1}. The bio-fertilizer produced by MBR improved the growth of wheat (Triticum aestivum L.) and Chinese cabbage (Brassica rapa pekinensis) with respect to plant height (by up to 18.36%) and the lengths of roots (by up to 34.03%, 27.22%, separately) in a pot experiment. This study integrated the production and storage of a bio-fertilizer to realize the one-step production of a solid bio-fertilizer using MBR.

60 APPLIED LIFE SCIENCES↗