Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

In Situ Strategy of the 2011 Mars Science Laboratory to Investigate the Habitability of Ancient Mars

The ten science investigations of the 2011 Mars Science Laboratory (MSL) Rover named "Curiosity" seek to provide a quantitative assessment of habitability through chemical and geological measurements from a highly capable robotic' platform. This mission seeks to understand if the conditions for life on ancient Mars are preserved in the near-surface geochemical record. These substantial payload resources enabled by MSL's new entry descent and landing (EDL) system have allowed the inclusion of instrument types nevv to the Mars surface including those that can accept delivered sample from rocks and soils and perform a wide range of chemical, isotopic, and mineralogical analyses. The Chemistry and Mineralogy (CheMin) experiment that is located in the interior of the rover is a powder x-ray Diffraction (XRD) and X-ray Fluorescence (XRF) instrument that provides elemental and mineralogical information. The Sample Analysis at Mars (SAM) suite of instruments complements this experiment by analyzing the volatile component of identically processed samples and by analyzing atmospheric composition. Other MSL payload tools such as the Mast Camera (Mastcam) and the Chemistry & Camera (ChemCam) instruments are utilized to identify targets for interrogation first by the arm tools and subsequent ingestion into SAM and CheMin using the Sample Acquisition, Processing, and Handling (SA/SPaH) subsystem. The arm tools include the Mars Hand Lens Imager (MAHLI) and the Chemistry and Alpha Particle X-ray Spectrometer (APXX). The Dynamic Albedo of Neutrons (DAN) instrument provides subsurface identification of hydrogen such as that contained in hydrated minerals

Mahaffy, Paul R.↗
NASA NTRS2004

Microscopic and Metallurgical Aspects of the Space Shuttle Columbia Accident Investigation and Reconstruction

The Space Shuttle Columbia was descending for a landing at the Kennedy Space Center (KSC) on February 1, 2003. Approximately 20 minutes prior to touchdown, the Columbia began disintegrating over the western United States; the majority of debris eventually impacted in eastern Texas and western Louisiana. A monumental effort eventually recovered approximately 84,000 pieces of debris, approximately 38% of the Orbiter's original dry weight. The debris was transported to KSC, where the items were catalogued and evaluated. Critical areas of interest, such as the left and right leading edge surfaces and the underside of the ship, were placed upon a grid to aid in the reconstruction. Items of interest included metallic structures, reinforced carbon-carbon composites, and ceramic heat insulation tiles. Many of the leading edge elements had re-solidified metallic deposits spattered on them. These deposits became known as slag and were one of the main focuses of the investigation. In order to help determine the sequence of events inside the left wing during the accident, the slag's composition, layering order, and directionality of deposition were studied. A myriad of analytical tests were performed in an attempt to ascertain the compositional and depositional characteristics of selected slag deposits, including the ordering of deposited layers within each individual slag deposit harvested. Initially, Scanning Electron Microscopy and Energy Dispersive X-Ray Spectroscopy (SEM/EDX) were performed to quickly characterize the overall composition of individual slag deposits: SEM utilizes a narrowlyfocused high-energy electron beam impinging upon a specimen. The incident beam excites and liberates lower energy secondary electrons, which are detected and analyzed, providing a visual representation of the sample's surface topography. EDX also relies on an incident electron beam, except an EDX unit measures X-ray energies generated by the impinging beam. Each element generates a unique X-ray signature; the EDX detector measures these discreet energies. EDX actually penetrates approximately 2 microns into the bulk of the sample. However, random examination of various portions of slag, coupled with the semiquantitative nature of the SEM/EDX analysis, did not yield convincingly pertinent data. Therefore, X-ray dot mapping was conducted, which provided more understandable data, both in terms of slag layering and composition. An X-ray dot map is generated by performing numerous EDX scans for individual elements, then compiling the scans in a visual representation. Eventually, specimens consisting of not only the slag, but of the adjacent RCC substrate as well were cross-sectioned. X-Ray dot mapping of the materialographicallymounted and -polished cross- sections provided a visual representation of both the layering sequence and compositional characteristics of the slag. Contemporaneously, Electron Spectroscopy for Chemical Analysis/X-Ray Photoelectron Spectroscopy (ESCA/XPS) and powdered X-Ray Diffraction (XRD) were performed to further characterize the deposits and to attempt to identify what, if any, compounds were present. The ESCA/XPS analysis allowed the analyst to "sputter" into the sample with an electron gun, aiding in the identification of the layering sequence. XPS uses photons, rather than electrons, which impinge upon the surface of the sample. XPS measures the electrons emitted from within the first 5 nm of the sample's surface. The XRD measures the scatter angles of incident X-rays; the angle and intensity of scatter depend upon the crystalline structure of the pulverized sample. XRD is considered a qualitative rather than quantitative technique. ESCA/XPS revealed that the final layer to deposit was predominantly carbonaceous. XRD was successful in identifying specific compounds, such as Al 2O3, Al and/or Al3 21SiO47, mullite (3(Al2)O3 -SiO2), and nickel-aluminides. Eventually, Electron MicroProbe Analysis (EMPA) was conducted on the marialographically-prepared cross- sections of selected slag deposits. Microprobe combines SEM and Wavelength Dispersive X-Ray Spectroscopy (WDS), and, like EDX, uses a narrowly-focused high-energy electron beam impinging upon a specimen to elicit, in the case of EPMA, characteristic X-rays with specific wavelengths. This quantitative, analytical tool proved the most useful in determining depositional layering and composition of the slag deposits. This information was utilized in verifying the location of the breach in the left leading edge of the wing of the Columbia.

McDaniels, Steven J.↗
NASA NTRS2011

Visible and Near-IR Reflectance Spectra of Smectite Acquired Under Dry Conditions for Interpretation of Martian Surface Mineralogy

Visible and near-IR (VNIR) spectra from the MEx OMEGA and the MRO CRISM hyper-spectral imaging instruments have spectral features associated with the H2O molecule and M OH functional groups (M = Mg, Fe, Al, and Si). Mineralogical assignments of martian spectral features are made on the basis of laboratory VNIR spectra, which were often acquired under ambient (humid) conditions. Smectites like nontronite, saponite, and montmorillionite have interlayer H2O that is exchangeable with their environment, and we have acquired smectite reflectance spectra under dry environmental conditions for interpretation of martian surface mineralogy. We also obtained chemical, Moessbauer (MB), powder X-ray diffraction (XRD), and thermogravimetric (TG) data to understand variations in spectral properties. VNIR spectra were recorded in humid lab air at 25-35C, in a dynamic dry N2 atmosphere (50-150 ppmv H2O) after exposing the smectite samples (5 nontronites, 3 montmorillionites, and 1 saponite) to that atmosphere for up to approximately l000 hr each at 25-35C, approximately 105C, and approximately 215C, and after re-exposure to humid lab air. Heating at 105C and 215C for approximately 1000 hr is taken as a surrogate for geologic time scales at lower temperatures. Upon exposure to dry N2, the position and intensity of spectral features associated with M-OH were relatively insensitive to the dry environment, and the spectral features associated with H2O (e.g., approximately 1.90 micrometers) decreased in intensity and are sometimes not detectable by the end of the 215C heating step. The position and intensity of H2O spectral features recovered upon re-exposure to lab air. XRD data show interlayer collapse for the nontronites and Namontmorillionites, with the interlayer remaining collapsed for the latter after re-exposure to lab air. The interlayer did not collapse for the saponite and Ca-montmorillionite. TG data show that the concentration of H2O derived from structural OH was invariant to the dry N2 treatment for saponite and the montmorillionites, but the nontronites had additional structural OH after treatment. Upon exposure to dry N2, the VNIR spectra also acquired a red slope with decreasing albedo between approximately 0.4 and approximately 2.0 micrometers. The magnitude of the effects covaries with exposure time to dry N2 and heating temperature. Upon re-exposure to lab air, the slope and albedo do not completely recover to pre-exposure values. MB data show that these effects do not result from partial reduction of ferric to ferrous iron, and TG data show they do not result from loss of structural OH. Possible explanations include formation of small clusters of (superparamagnetic) ferric oxide and reduced smectite crystallinity. The difference in spectral properties between spectra acquired in humid lab air and under dry conditions are consequential for interpretation of CRISM and OMEGA spectra. For example, nontronite by itself and not nontronite plus ferrihydrite can account for the red spectral slope in martian spectra where nontronite is indicated by the Fe-OH spectral features.

Morris, Richard V.↗
NASA NTRS2018

Investigation of Alpha Silicon Carbide / Carbon Fiber Proposed (2H & 6H-SiC) / C

A commercially available alpha silicon carbide coated carbon 12k fiber tow was subjected to rigorous inspection and testing. The pyrolized polyacrylonitrile (PAN) fiber had gone through a conversion process that resulted in a thin layer of SiC forming on the exterior of the fiber. The fibers? surface was characterized by x-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and scanning electron microscopy (SEM). Powdered x-ray diffraction (XRD) examined the bulk material properties. Transmission electron microscopy (TEM) coupled with energy-dispersive X-ray spectroscopy (EDS) examined the crystallinity of the SiC. A number of pristine samples were used to determine elongation rate and tensile strength.

Trunek, Andrew↗
NASA NTRS2020

Thermal Analysis, Compressibility, and Decomposition of Synthetic Bastnäsite-(La) to Lanthanum Oxyfluoride

Understanding basic material properties of rare earth element (REE) bearing minerals such as their phase stability and equations of state can assist in understanding how economically viable deposits might form. Bastnäsite is the most commonly mined REE bearing mineral. We synthesized the lanthanum-fluoride end member, bastnäsite-(La) (LaCO3F), and investigated its thermal behavior and decomposition products from 298 K to 1173 K under ambient pressure conditions through thermogravimetric analysis, differential scanning calorimetry, evolved gas analysis, and high temperature powder X-ray diffraction. We also investigated the compressibility of bastnäsite-(La) via single crystal X-ray diffraction in diamond anvil cells at an ambient temperature up to 11.3 GPa and from 4.9 GPa to 7.7 GPa up to 673 K. At ambient pressure, bastnäsite-(La) was stable up to 598 K in air, where it decomposed into CO2 and tetragonal γ-LaOF. Above 948 K, cubic α-LaOF is stable. High temperature X-ray diffraction data were used to fit the Fei thermal equation of state and the thermal expansion coefficient α(sub 298) for all three materials. Bastnäsite-(La) was fit from 298 K to 723 K with V(sub 0) = 439.82 Å(exp 3), α(sub 298) = 4.32 × 10(exp -5) K(exp -1), a(sub 0) = −1.68 × 10(exp -5) K(exp -1), a(sub 1) = 8.34 × 10(exp -8) K(exp -1), and a(sub 2) = 3.126 K(exp -1). Tetragonal γ-LaOF was fit from 723 K to 948 K with V(sub 0) = 96.51 Å(exp 3), α(sub 298) = 2.95×10(exp -4) K(exp -1), a(sub 0) = −2.41×10(exp -5) K(exp -1), a(sub 1) = 2.42×10(exp -7) K(exp -1), and a(sub 2) = 41.147 K(exp -1). Cubic α-LaOF was fit from 973 K to 1123 K with V(sub 0) = 190.71 Å(exp 3), α(sub 298) = −1.12×10(exp -5) K(exp -1), a(sub 0) = 2.36×10(exp -4) K(exp -1), a(sub 1) = −1.73 × 10(exp -7) K(exp -1), and a(sub 2) = −17.362 K(exp -1). An ambient temperature third order Birch–Murnaghan equation of state was fit with V(sub 0) = 439.82 Å(exp 3), K(sub 0) = 105 GPa, and K’ = 5.58.

Bastnäsite↗
NASA NTRSDate not supplied

TEM and XRD Investigation of Impact Glass Alteration Products: Amorphous Materials, Phyllosilicates and Everything in Between

Impact cratering is one of the most ubiquitous geologic processes shaping the surface of all solid bodies in our solar system. Impacts are also a major source of clay minerals and poorly crystalline, clay-like materials on Earth and Mars[1,2].These phyllosilicates and related clay-like phases comprise an incredibly complex group of materials, and their characterization, even in controlled laboratory settings, remains a challenging endeavor. The nature and origin of clay minerals and amorphous materials on Mars, which form a major component (~20-70 wt %) of rock and soil samples in Gale Crater as determined by the CheMin instrument on Curiosity, have remained ambiguous[3]. These amorphous phases likely fall on a spectrum between pristine volcanic and/or impact-produced primary materials and clay minerals and related phases formed from aqueous alteration. Amorphous materials are common weathering products in terrestrial sediments, soils, and paleosols [e.g., 4,5].Primary impact materials (glass, melt rocks)are comparable in some ways to those generated volcanically [6], and so it may be possible that an amorphous component is preserved within altered impactites. There are hundreds of thousands of impact craters on Mars, and Curiosity and Perseverance are currently exploring ancient impact craters. We hypothesize that the sediments and lithologies in Gale and Jezero Craters and elsewhere contain altered impact products; it is therefore important to better understand the composition and structure of these materials. Here we present the first results from a study characterizing materials produced from impact glass alteration–clay minerals, poorly crystalline/amorphous materials–in terrestrial craters using Transmission Electron Microscopy (TEM), powder X-ray diffraction (pXRD)and chemical (EDS) analysis.

Impact crater↗
NASA NTRS2022

Effect of Ni2+, Zn2+, and Co2+ on green rust transformation to magnetite

In this study, we investigated Ni2+, Zn2+, and Co2+ mineralogical incorporation and its effect on green rust transformation to magnetite. Mineral transformation experiments were conducted by heating green rust suspensions at 85 °C in the presence of Ni2+, Zn2+, or Co2+ under strict anoxic conditions. Transmission electron microscopy and powder X-ray diffraction showed the conversion of hexagonal green rust platelets to fine grained cubic magnetite crystals. The addition of Ni2+, Zn2+, and Co2+ resulted in faster rates of mineral transformation. The conversion of green rust to magnetite was concurrent to significant increases in metal uptake, demonstrating a strong affinity for metal sorption/ co-precipitation by magnetite. Dissolution ratio curves showed that Ni2+, Zn2+, and Co2+ cations were incorporated into the mineral structure during magnetite crystal growth. The results indicate that the transformation of green rust to magnetite is accelerated by metal impurities, and that magnetite is a highly effective scavenger of trace metals during mineral transformation. The implications for using diagenetic magnetite from green rust precursors as paleoproxies of Precambrian ocean chemistry are discussed.

Hydrosulfate green rust↗
DOE OSTI2024

LDRD poster - Identifying the speciation of salt-based actinides in the presence of contaminants

Molten salt reactors (MSRs) are among the most promising Generation IV nuclear reactors. The salts used in these reactors exhibit a high affinity for moisture and oxygen, and heating does not eliminate the oxides that are formed. Additionally, due to the high operating temperatures, reactor parts experience pronounced corrosion, and the resulting corrosion products integrate into the fuel salt system. It is hypothesized that the speciation of f-elements in molten salts would change in the presence of oxides and corrosion products. These changes in local structure can alter the rheological properties, which are critical to the operational and safety parameters of the reactors. Therefore, an in-depth understanding of how corrosion products influence lanthanide/actinide speciation is crucial. To test this hypothesis, lanthanides (as surrogates for actinides) and actinide chlorides were mixed with oxides (such as nickel oxide and lithium oxide) and/or corrosion products (e.g., nickel chloride) and reacted in molten salts. The resulting phases were analyzed using techniques such as powder X-ray diffraction, Raman spectroscopy, UV-Visible spectroscopy, and nuclear magnetic resonance spectroscopy. In the presence of oxides, due to the high oxophilicity of f-elements, these elements capture oxygen from the oxides, forming lanthanide/actinide oxide or oxychloride phases. Specifically, with cerium chloride, the introduction of lithium oxide to the formation of various final products depending on the oxide concentration. At lower oxide concentrations, cerium oxychloride (CeOCl) in the +3 oxidation state was observed, while an increase in the oxide concentration led to the formation of cerium dioxide (CeO2), where cerium is in the +4 oxidation state. In contrast, with nickel oxide, CeOCl formation was consistently observed, regardless of the oxide concentration. This project successfully determined that the speciation of f-elements change in the presence of oxides and different oxides in molten salts result in different final products. When the influence of nickel chloride was examined, changes in f-element speciation were not observed. However, it reacted with lithium chloride to generate a lithium-nickel-chloride (Li6NiCl8) phase, which was also observed when nickel oxide was reacted. Computational models were developed to simulate the phases anticipated under experimental conditions.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2023

Uniaxial stress increases layer stacking disorder in calcium silicate hydrates with low calcium content

The long-term stress response of concrete is controlled by the intergrain and intragrain interactions of calcium-silicate-hydrates (C-S-H), nanocrystalline forms of tobermorites. To investigate both types of interactions, we examined the deviatoric stress response of 11 Å tobermorite powder with X-ray diffraction, finding that its layer stacking (i.e., sliding) disorder significantly increases. A similar experiment was performed on nanocrystalline C-S-H powders before and after applying a 360 MPa uniaxial stress. Layer stacking disorder (in the form of intragrain deformation) increases when there is low water content and when the basal spacing is large. We also find that grains with a smaller thickness-to-diameter aspect ratio are first to develop preferred orientation (in the form of intergrain sliding), facilitated by gel water. Furthermore, these findings show that intragrain deformations in C-S-H can occur at relatively low stresses and provide insights into the creep mechanism of C-S-H.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Neutron and X-ray diffraction of plasma-sprayed zirconia-yttria thermal barrier coatings

ZrO2-7.8mol. pct. YO1.5, a fused powder, and ZrO2-8.7mol. pct. YO1.5, a prereacted powder, were plasma-sprayed onto steel substrates. Neutron diffraction and X-ray diffraction of the as-received powder, the powder plasma sprayed into water, as-sprayed coatings, and coatings heat-treated for 10 and 100 h were carried out to study phase transformations and ordering of the oxygen ions on the oxygen sublattice. The as-received fused powder has a much lower monoclinic percentage than does the pre-reacted powder, this resulting in a much lower monoclinic percentage in the coating. Heat treatment increases the percentages of the cubic and monoclinic phases, while decreasing the tetragonal content. An ordered tetragonal phase is detected by the presence of extra neutron diffraction peaks. These phase transformations and ordering will result in volume changes. The implications of these transformations on the performance of partially stabilized zirconia thermal barrier coatings is discussed.

Shankar, N. R.↗
DOE OSTI2025

Support of Adhesion Mechanisms in Al 2 O 3 Aerosol Deposition Through Laser-Induced Particle Impact Testing

Aerosol deposition (AD) is a kinetic spray process capable of depositing ceramic coatings at room temperature, but AD process development is generally a laborious exploration of a large process parameter space. Here, this paper presents a case study investigating whether laser-induced particle impact testing (LIPIT) could be applied to expedite development of an alumina (Al 2 O 3 ) coating on nickel (Ni): Specifically, whether LIPIT measurements could predict critical velocities of adhesion on Ni and Al 2 O 3 , and the effect of ball milling the Al 2 O 3 powder. Because LIPIT has a diffraction-limited lower bound on imageable particle size, the usefulness of Al 2 O 3 powder agglomerates as a proxy for single particles was additionally studied. Overall, LIPIT measurements and AD sprays agreed that ball milling dramatically improves adhesion. Additionally, LIPIT measurements of critical velocity of adhesion of Al 2 O 3 powder agglomerates on Ni and Al 2 O 3 substrates (150 meters per second [m/s] and 250 m/s, respectively) quantitatively agreed with predictions from a previously published model based on picoindentation and molecular dynamics simulations. Together, these findings support the established hypothesis that Al 2 O 3 adheres via a dislocation-mediated mechanism in AD, that Al 2 O 3 powder agglomerates adhere as individual constituent particles rather than collectively, and that, for this case study, LIPIT measurements were predictive of AD process parameters.

Al2O3↗
DOE OSTI2025

Residual stress distribution in an additively manufactured complex structure by neutron diffraction measurement

Residual stress in an aerodynamically shaped Ni-based superalloy airfoil fabricated by laser powder bed fusion was measured by neutron diffraction. The experiment was conducted by considering the complex shape, implementing computer aided experiment planning, and automatic alignment at each rapid measurement. The 3-dimensional (3D) residual stress distribution in the airfoil is presented in this work, which lacks symmetry due to the complex geometry of the airfoil. In conclusion, the results provide theoretical thermal processing models a complete residual stress dataset of simulation validation on 3D shape complex structure.

Residual stress↗
DOE OSTI2024

Dipolar Spin Ice Regime Proximate to an All-In-All-Out Néel Ground State in the Dipolar-Octupolar Pyrochlore Ce 2 Sn 2 O 7

The dipolar-octupolar (DO) pyrochlores, R 2 M 2 O 7 ( R = Ce , Sm , Nd ), are key players in the search for realizable novel quantum spin liquid (QSL) states as a large parameter space within the DO pyrochlore phase diagram is theorized to host QSL states of both dipolar and octupolar nature. New single crystals and powders of Ce 2 Sn 2 O 7 , synthesized by hydrothermal techniques, present an opportunity for a new characterization of the exchange parameters in Ce 2 Sn 2 O 7 using the near-neighbor X Y Z model Hamiltonian associated with DO pyrochlores. Utilizing quantum numerical linked cluster expansion fits to heat capacity and magnetic susceptibility measurements, and classical Monte Carlo calculations to the diffuse neutron diffraction of the new hydrothermally grown Ce 2 Sn 2 O 7 samples, we place Ce 2 Sn 2 O 7 ’s ground state within the ordered dipolar all-in-all-out (AIAO) Néel phase, with quantum Monte Carlo calculations showing a transition to long-range order at temperatures below those accessed experimentally. Indeed, our new neutron diffraction measurements on the hydrothermally grown Ce 2 Sn 2 O 7 powders show a broad signal at low scattering wave vectors, reminiscent of a spin ice, in striking contrast from previous powder neutron diffraction on samples grown from solid-state synthesis, which found diffuse scattering at high scattering wave vectors associated with magnetic and suggested an octupolar quantum spin ice state. We conclude that new hydrothermally grown Ce 2 Sn 2 O 7 samples host a finite-temperature proximate dipolar spin ice phase, above the expected transition to AIAO Néel order. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Direct observations of shock-induced melting in a porous solid using time-resolved x-ray diffraction

Here in this work we provide direct evidence of shock-induced melting and associated kinetics in a porous solid (aluminum powder) using time-resolved x-ray diffraction. Unambiguous evidence of melting in 50% porous aluminum (Al) powder samples, shocked to peak pressures between ~13 - 19 GPa, was provided by the broadening of the Debye-Scherrer ring corresponding to the (111) peak. Shocked Al powder did not melt completely in any of our experiments within the durations of measurement. Incomplete (partial) melting of the powder, even after several hundreds of nanoseconds of shock loading, provides insights into thermal transport with Al powder particles under high-pressure dynamic loading. Such insights are quite valuable for developing well-constrained melting models and thermodynamic equations of state for porous Al and other porous solids relevant to planetary and materials science.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Highly Extensible X-ray Diffraction Toolkit

This code has been previous released as open source under LLNL-CODE-529294. The HEXRD program comprises a library of X-ray diffraction analysis tools and a stand-alone GUI application. While there are many software packages that provide similar capabilities, HEXRD was designed to provide an extremely flexible and extensible basis for describing a broad array of X-ray diffraction instruments; this includes both mono- and poly-chromatic modalities as well as poly- and single-crystal samples. The high-level objects include Material: an abstraction for defining crystalline materials, including unit cell parameters and anisotropic elastic moduli Imageseries: an interface for series of diffraction images containing one or more frames, including provisions for metadata. Instrument: an abstraction of an X-ray diffraction instrument including support for the definition of multiple detector elements as well as powder, Laue, and mono-chromatic single/multi-grain diffraction analysis modalities (including attendant calibration routines). The hexrdgui package is a standalone PySide2/Qt5 GUI built on top of hexrd. The 0.8.1 release includes various bug fixes as well as some new functionality in the GUI, including: o Enhancements to the import tools for LLNL diffraction instruemtns (PXRDIP and TARDIS) o The ability to save 1-d LeBail fits of integrated diffraction spectra.

Barton, NathanR.↗
DOE OSTI2025

In situ neutron and synchrotron diffraction of La0.9Sr0.1Co1-yFeyO3 (y=0, 0.25, 0.75, 1)

Powder La0.9Sr0.1Co1-yFeyO3 (y=0, 0.25, 0.75, 1) samples were probed via in situ neutron (POWGEN, Spallation Neutron Source, Oak Ridge National Laboratory) and synchrotron (11-BM, Advanced Photon Source, Argonne National Lab) diffraction cycling between methane and air at temperatures ranging from room temperature to 850 C. Mail in neutron data (POWGEN) was collected on the samples at room temperature and 10 K. Additionally, gas production under similar reaction conditions as the in situ diffraction as monitored by Gasboard 3100 (California State University, Fullerton) is also included.

catalysis↗
DOE OSTI2021

Influence of heterocyclic N-donors on the structural topologies and vibrational spectra of uranyl selenate phases

Uranyl (U(VI)O 2 2+ ) selenate compounds represent a well-studied family of structures with diverse structural arrays. Differences in the overall topology and bonding with the uranyl cation combined with additional intermolecular interactions can lead to variation in the resulting spectroscopic signals. Here, in the current study, we evaluated the structural chemistry and vibrational spectroscopy for uranyl selenates crystallized with heterocyclic N-donors. Five compounds ((C 4 H 12 N 2 )[(UO 2 )(SeO 4 ) 2 (H 2 O)]·H 2 O (USe_pip), (C 4 H 5 N 2 ) 2 [(UO 2 )(SeO 4 ) 2 (H 2 O)] (USe_pyrdz), (C 5 H 5 N) 2 [(UO 2 ) 2 (SeO 4 ) 3 (H 2 O)] ∙ 3H 2 O (USe_pyrmd), (H 3 O) 2 (C 4 H 5 N 2 ) 2 [(UO 2 ) 3 (SeO 4 ) 5 (H 2 O)]·H 2 O (USe_pyrz), and (C 5 H 6 N) 2 [(UO 2 ) 2 (SeO 4 ) 3 (H 2 O)] ∙ 3H 2 O (USe_pyr)) were characterized using X-ray diffraction (single-crystal and powder) and vibrational (Raman and IR) spectroscopy. Two one-dimensional (1-D) chain and three two-dimensional sheet (2-D) topologies were identified and classified based upon previous graphical representations. Overall, the arrangement of the heteroatoms could be linked to the hydrogen bonding network associated with the heterocycles and selenate anions. Vibrational spectra of the solid-state compounds were complex, with multiple bands associated with the uranyl cation, selenate anion, and heteroatoms. The ν 1 symmetric stretching band of the uranyl was relatively consistent across all compounds, whereas differences were observed for the ν 3 asymmetric band between the 1-D and 2-D structural topologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗