SEARCH · Engineering Papers

Results for “phase pure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Effects of elevated temperature exposure on the residual stress state and microstructure of PVD Cr coatings on SiC investigated via in situ X-ray diffraction and transmission electron microscopy

Pure Cr coatings are being considered as corrosion-resistant layers for SiC-SiC f composite fuel cladding in light water reactors. The residual stress state and interdiffusion behavior of Cr coatings deposited on SiC substrates using bipolar high-power impulse magnetron sputtering (B-HiPIMS) and direct current impulse magnetron sputtering (DCMS) were studied using in situ X-ray diffraction experiments at 300 °C, 700 °C, and 1200 °C. After elevated temperature exposure, evolution of the coating microstructure and coating/substrate interdiffusion was characterized by transmission electron microscopy. The compressive residual stress of the dense B-HiPIMS coating at room temperature was gradually relieved at 300 °C, while the stress transitioned to a tensile state at 700 °C. Grain growth of the Cr coating and a Cr–SiC interdiffusion layer consisting of newly formed Cr–C and Cr–Si phases were observed in the B-HiPIMS coating after exposure at 700 °C. The phases in the interdiffusion layer were identified to be Cr 7 C 3 , Cr 3 Si, and Cr 5 Si 3 C x experimentally and by thermodynamic predictions. For the DCMS coating, however, changes in residual stress and microstructure at the elevated temperatures were limited by the inherent porosity and inhomogeneous structure of the as-deposited coating. At 1200 °C, both coating types interacted rapidly with the underlying SiC substrate in the early stages of the experiment. The results from this study suggest that the characteristics of the Cr coatings do not significantly change at the reactor operating temperature of 300 °C, while changes in microstructure and stress state are expected in off-normal conditions of 700 °C and 1200 °C. Finally the results from this study suggest the B-HiPIMS coating is best-suited as a protective coating for SiC fuel cladding.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Ab Initio Molecular Dynamics Insights into Stress Corrosion Cracking and Dissolution of Metal Oxides

Oxide phases such as α-Fe2O3 (hematite) and α-Al2O3 (corundum) are highly insoluble in water; however, subcritical crack growth has been observed in humidity nonetheless. Chemically induced bond breaking at the crack tip appears unlikely due to sterically hindered molecular transport. The molecular mechanics of a crack in corundum with a reactive force field reveal minimal lattice trapping, leading to bond breaking before sufficient space opens for water transport. To address this, we model a pre-built blunt crack with space for H2O molecule adsorption at the tip and show that it reduces fracture toughness by lowering the critical J-integral. Then, we explore stress-enhanced dissolution to understand the mechanism of crack tip blunting in the oxide/water system. Density functional theory combined with metadynamics was employed to describe atomic dissolution from flat hematite and corundum surfaces in pure water. Strain accelerates dissolution, stabilizing intermediate states with broken bonds before full atom detachment, while the free energy profile of unstrained surfaces is almost monotonic. The atomistic calculations provided input for a kinetic model, predicting the shape evolution of a blunt crack tip, which displays three distinct regimes: (i) dissolution primarily away from the tip, (ii) enhanced blunting near but not at the apex, and (iii) sharpening near the apex. The transition between regimes occurs at a low strain, highlighting the critical role of water in the subcritical crack growth of oxide scales, with dissolution as the fundamental microscopic mechanism behind this process.

Chemistry↗

DOE OSTI2022

Engineering an effective three-spin Hamiltonian in trapped-ion systems for applications in quantum simulation

Trapped-ion quantum simulators, in analog and digital modes, are considered a primary candidate to achieve quantum advantage in quantum simulation and quantum computation. The underlying controlled ion–laser interactions induce all-to-all two-spin interactions via the collective modes of motion through Cirac–Zoller or Mølmer–Sørensen schemes, leading to effective two-spin Hamiltonians, as well as two-qubit entangling gates. In this work, the Mølmer–Sørensen scheme is extended to induce three-spin interactions via tailored first- and second-order spin–motion couplings. The scheme enables engineering single-, two-, and three-spin interactions, and can be tuned via an enhanced protocol to simulate purely three-spin dynamics. Analytical results for the effective evolution are presented, along with detailed numerical simulations of the full dynamics to support the accuracy and feasibility of the proposed scheme for near-term applications. With a focus on quantum simulation, the advantage of a direct analog implementation of three-spin dynamics is demonstrated via the example of matter-gauge interactions in the U(1) lattice gauge theory within the quantum link model. The mapping of degrees of freedom and strategies for scaling the three-spin scheme to larger systems, are detailed, along with a discussion of the expected outcome of the simulation of the quantum link model given realistic fidelities in the upcoming experiments. The applications of the three-spin scheme go beyond the lattice gauge theory example studied here and include studies of static and dynamical phase diagrams of strongly interacting condensed-matter systems modeled by two- and three-spin Hamiltonians.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Formation of Mn-rich interfacial phases in Co 2 Fe x Mn 1-x Si thin films

Here, we report the formation of Mn-rich regions at the interface of Co 2 Fe x Mn 1-x Si thin films grown on GaAs substrates by molecular beam epitaxy (MBE). Scanning transmission electron microscopy (STEM) with electron energy loss (EEL) spectrum imaging reveals that each interfacial region: (1) is 1–2 nm wide, (2) occurs irrespective of the Fe/Mn composition ratio and in both Co-rich and Co-poor films, and (3) displaces both Co and Fe indiscriminately. We also observe a Mn-depleted region in each film directly above each Mn-rich interfacial layer, roughly 3 nm in width in the x = 0 and x = 0.3 films, and 1 nm in the x = 0.7 (less Mn) film. We posit that growth energetics favor Mn diffusion to the interface even when there is no significant Ga interdiffusion into the epitaxial film. Element-specific X-ray magnetic circular dichroism (XMCD) measurements show larger Co, Fe, and Mn orbital to spin magnetic moment ratios compared to bulk values across the Co 2 Fe x Mn 1-x Si compositional range. The values lie between reported values for pure bulk and nanostructured Co, Fe, and Mn materials, corroborating the non-uniform, layered nature of the material on the nanoscale. Finally, SQUID magnetometry demonstrates that the films deviate from the Slater-Pauling rule for uniform films of both the expected and the measured composition. The results inform a need for care and increased scrutiny when forming Mn-based magnetic thin films on III-V semiconductors like GaAs, particularly when films are on the order of 5 nm or when interface composition is critical to spin transport or other device applications.

36 MATERIALS SCIENCE↗

DOE OSTI2024

The Mu2e crystal calorimeter

The Mu2e experiment at Fermilab will search for the charged-lepton flavour violating conversion of negative muons into electrons in the coulomb field of an Al nucleus, planning to reach a single event sensitivity of about $3\cdot10^{−17}$, four orders of magnitude beyond the current best limit.The conversion electron has a clear monoenergetic signature at 104.967 MeV, slightly below the muon rest mass, and will be identified by a complementary measurement carried out by a high-resolution tracker and an electromagnetic calorimeter (EMC). The calorimeter is composed of 1348 pure CsI crystals, each read by two custom UV-extended SiPMs, that are arranged in two annular disks. The EMC should achieve better than 10% energy resolution and 500 ps timing resolution for 100 MeV electrons and maintain extremely high levels of reliability and stability and in a harsh operating environment with high vacuum, 1 T B-field and radiation exposures up to 100 krad and $10^{12} \rm{n}_\rm{1MeVeq}/\rm{cm}^{2}$.The calorimeter technological choice, along with the design of the custom front-end electronics, cooling and mechanical systems were validated through an electron beam test on a large-scale 51-crystals prototype (Module-0) and extensive test campaigns that characterised and verified the performance of crystals, photodetectors, analogue and digital electronics. This included hardware stress tests and irradiation campaigns with neutrons, protons, and photons.The production and QC phases of all calorimeter components is completed apart for the digital electronics that has been revised for improving its resilience to SEU and SEL. A series of vertical slice tests with the final electronics is being carried out on the Module-0 at LNF along with the implementation and validation of the calibration procedures. The first disk has been assembled in 2022 while the second disk is under assembly at the moment of writing. Status of construction will be summarised, along with plans for commissioning and first calibration of the fully assembled disks.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2020

Instability of an electron-plasma shear layer in an externally imposed strain flow

The E x B shear instability of a two-dimensional (2D) filament (i.e., a thin, rectangular strip perpendicular to the magnetic field) of magnetized pure electron plasma is investigated experimentally in the presence of an externally imposed strain flow. Data are acquired using a specialized Penning–Malmberg trap in which strain flows can be applied in 2D by biasing segmented electrodes surrounding the plasma. The E x B drift dynamics are well-described by the Drift-Poisson equations, which are isomorphic to the 2D Euler equations describing ideal fluids. Thus, the experimental results correspond to the Rayleigh instability of a shear layer in a 2D ideal fluid, where the electron density is analogous to the fluid vorticity. Shear layers are prepared by stretching initially axisymmetric electron vortices using a strong, applied strain flow. The data at early times are in quantitative agreement with a linear model which extends Rayleigh’s work to account for the influence of an external strain flow. In the presence of weak strain, the system approximately maintains a phase relationship that corresponds to an instantaneous Rayleigh eigenmode. The instability develops into the nonlinear regime later in time and at smaller spatial scales as the strain rate is increased. A secondary vortex pairing instability is observed, but it is suppressed when the strain-to-vorticity ratio exceeds roughly 0.025. In this way, vorticity transport perpendicular to the filament is diminished due to the applied strain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

The KLEVER survey: nitrogen abundances at z ~ 2 and probing the existence of a fundamental nitrogen relation

Here we present a comparison of the nitrogen-to-oxygen ratio (N/O) in 37 high-redshift galaxies at z ~ 2 taken from the KMOS Lensed Emission Lines and VElocity Review (KLEVER) Survey with a comparison sample of local galaxies, taken from the Sloan Digital Sky Survey (SDSS). The KLEVER sample shows only a mild enrichment in N/O of +0.1 dex when compared to local galaxies at a given gas-phase metallicity (O/H), but shows a depletion in N/O of –0.35 dex when compared at a fixed stellar mass (M * ). We find a strong anticorrelation in local galaxies between N/O and SFR in the M * –N/O plane, similar to the anticorrelation between O/H and SFR found in the mass–metallicity relation (MZR). We use this anticorrelation to construct a fundamental nitrogen relation (FNR), analogous to the fundamental metallicity relation (FMR). We find that KLEVER galaxies are consistent with both the FMR and the FNR. This suggests that the depletion of N/O in high-z galaxies when considered at a fixed M * is driven by the redshift evolution of the mass–metallicity relation in combination with a near redshift-invariant N/O–O/H relation. Furthermore, the existence of an fundamental nitrogen relation suggests that the mechanisms governing the fundamental metallicity relation must be probed by not only O/H, but also N/O, suggesting pure-pristine gas inflows are not the primary driver of the FMR, and other properties such as variations in galaxy age and star formation efficiency must be important.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Feedstock and Catalyst Impact on Bio-Oil Production and FCC Co-Processing to Fuels

NREL’s thermochemical biomass conversion research is focused on ex-situ upgrading of biomass fast-pyrolysis (FP) vapors as an efficient and economical route to completely biogenic pyrolysis-based fuel precursors, potential fuels, and value-added chemicals depending on catalyst choice and process conditions. In this approach, biomass vapors are generated via fast pyrolysis with destabilizing vapor components (char, inorganics, tar aerosols) removed by hot gas filtration to produce conditioned vapors more responsive to catalytic upgrading. A Davison Circulating Riser (DCR), a petroleum industry standard for fluidized catalytic cracking (FCC) catalyst evaluation, was coupled with a custom pyrolyzer system designed to produce consistent composition pyrolysis vapors as feed to the DCR. The coupled system is shown below (Figure 1). Pyrolysis vapors, derived from pure hardwood and softwood, were upgraded using commercially available and laboratory modified zeolite-based catalysts. Upgraded oils were analyzed via 31P and 13C NMR spectroscopy, GCxGC-TOF/MS, carbonyl and ultimate analysis (CHNO), and micro distillation to assess both oil chemistry and distillation behavior as they relate to catalyst and feedstock type for producing fungible hydrocarbon product liquids. Measured process parameters identified from technoeconomic process analysis included achieving oil oxygenate contents of 20% or less, carbon-conversion efficiencies of 30% or more, and catalyst coking rates of 10% or less. A proprietary modified zeolite catalyst from Johnson Matthey produced oils that met these requirements. Using the DCR equipped with a proprietary nozzle system, a second approach focused on reducing the carbon intensity of petroleum-derived hydrocarbon fuels by FCC co-processing these CFP oils with petroleum vacuum gas oil (VGO) to produce biogenic carbon containing fuels. The vapor-phase upgrading results demonstrated for the first time the feasibility of producing refinery-compatible hydrocarbon fuel intermediates entirely from biomass-derived fast-pyrolysis vapors using an industry-accepted DCR system for catalytic upgrading. The co-processing results demonstrated the feasibility of using CFP oils with VGO feeds in FCC refinery operations to produce biogenic carbon containing fuels.

bio-oil↗

DOE OSTI2024

DFT Analysis of the Binding of Rare Earth Nitrates at Internal and External Surfaces of MCM-22

MCM-22-type zeolites constitute a well-characterized tunable class of aluminosilicates suitable for elucidating the fundamental aspects of the binding of rare earth elements (REEs) in layered materials. Starting from the pure silica version ITQ-1 with a unit cell of Si 72 O 144 , a model for periodic bulk crystalline MCM-22 with a finite Al concentration is provided by replacing a Si atom with an Al atom in the unit cell at suitable tetrahedral sites near an internal pore surface. Then, a H atom is added to an O atom bridging Si and Al atoms to create a Brønsted acid site (BAS). There are no internal silanol groups in this bulk model. To generate a model for an external surface, we adopt the fully hydroxylated surface structure of a layer within the ITQ-1 precursor with two silanols per lateral unit cell. A BAS on the external surface can be generated by replacing a near-surface Si atom with an Al atom and adding a H atom, as above. The strength of binding at a BAS of REE, X, taken to be present in the solution phase as nitrates, is determined from the energy change in the reaction X(NO 3 ) 3 + ≡Si–{OH}–Al≡ → ≡Si–{OX(NO 3 ) 2 }–Al≡+ HNO 3 . The strength of binding at the silanols is determined similarly. Binding energies are determined from two approaches. The first performs periodic plane-wave density functional theory (DFT) total energy analysis for an entire unit cell of MCM-22. The second utilizes cluster models capturing the local environment of REE binding sites and performs DFT analysis with localized basis sets. The two approaches yield consistent results for Nd, revealing similarly strong binding at either an external or internal BAS, but much weaker binding at a silanol site. This is consistent with the picture deduced from recent experiments. Here, we also comment on binding at Al-bridged siloxane sites, which have been suggested as alternative binding sites to BAS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Geometric entropies and their Hamiltonian flows

In holographic theories, the Hubeny-Rangamani-Takayanagi (HRT) area operator plays a key role in our understanding of the emergence of semiclassical Einstein-Hilbert gravity. When higher derivative corrections are included, the role of the area is instead played by a more general functional known as the geometric entropy. It is thus of interest to understand the flow generated by the geometric entropy on the classical phase space. In particular, the fact that the associated flow in Einstein-Hilbert or Jackiw-Teitelboim (JT) gravity induces a relative boost between the left and right entanglement wedges is deeply related to the fact that gravitational dressing promotes the von Neumann algebra of local fields in each wedge to type II. This relative boost is known as a boundary-condition-preserving (BCP) kink-transformation. In a general theory of gravity (with arbitrary higher-derivative terms), it is straightforward to show that the flow continues to take the above geometric form when acting on a spacetime where the HRT surface is the bifurcation surface of a Killing horizon. However, the form of the flow on other spacetimes is less clear. In this paper, we use the manifestly-covariant Peierls bracket to explore such flows in two-dimensional theories of JT gravity coupled to matter fields with higher derivative interactions. The results no longer take a purely geometric form and, instead, demonstrate new features that should be expected of such flows in general higher derivative theories. We also show how to obtain the above flows using Poisson brackets.

AdS-CFT correspondence↗

DOE OSTI2022

Role of chemical disorder on radiation-induced defect production and damage evolution in NiFeCoCr

Understanding chemical disorder in many concentrated solid solution alloys (CSAs) at the levels of electrons and atoms has attracted increasing attention as a path forward to reveal and identify underlying mechanisms for extraordinary mechanical properties and improved radiation tolerance. Single-phase NiFeCoCr CSA is a common base for many high-entropy alloys (HEAs) that have shown improved mechanical strength and radiation tolerance. In this study, defect production and damage evolution in NiFeCoCr under ion irradiation at room temperature to dose over 20 dpa are determined using ion channeling technique along both <100> and <110> directions utilizing multiple probing beam energies. The results obtained from the multi-axial and multi-energy channeling analysis are compared with those previously obtained for Ni crystals irradiated under similar conditions. The influence of chemical complexity on defect production and clustering at early-stage under room temperature irradiation up to dose of 1 dpa is discussed based on positron annihilation spectroscopy results. Defect structure evaluation in Ni and NiFeCoCr is also discussed based on transmission electron microscopy results over a prolonged irradiation at both room and elevated temperatures. Compared with chemically complex NiFeCoCr, larger dislocation loops thus less lattice strain are expected to form in pure Ni. Moreover, the role of chemical disorder in this CSA is also investigated based on ab initio calculations using large supercells. Finally, to understand the impact of chemical complexity effect on defect structure evolution, this integrated research effort attempts to link the relatively large charge redistribution due to difference in valence electron counts resulting from alloying different 3d transition metal elements, moderate lattice distortion arising from similar adaptable atomic size, and notable suppressed or delayed damage evolution in NiFeCoCr.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Elucidating the role of earth alkaline doping in perovskite-based methane dry reforming catalysts

To elucidate the role of earth alkaline doping in perovskite-based dry reforming of methane (DRM) catalysts, we embarked on a comparative and exemplary study of a Ni-based Sm perovskite with and without Sr doping. While the Sr-doped material appears as a structure-pure Sm 1.5 Sr 0.5 NiO 4 Ruddlesden Popper structure, the undoped material is a NiO/monoclinic Sm 2 O 3 composite. Hydrogen pre-reduction or direct activation in the DRM mixture in all cases yields either active Ni/Sm 2 O 3 or Ni/Sm 2 O 3 /SrCO 3 materials, with albeit different short-term stability and deactivation behavior. The much smaller Ni particle size after hydrogen reduction of Sm 1.5 Sr 0.5 NiO 4 , and of generally all undoped materials stabilizes the short and long-term DRM activity. Carbon dioxide reactivity manifests itself in the direct formation of SrCO 3 in the case of Sm 1.5 Sr 0.5 NiO 4 , which is dominant at high temperatures. For Sm 1.5 Sr 0.5 NiO 4 , the CO : H 2 ratio exceeds 1 at these temperatures, which is attributed to faster direct carbon dioxide conversion to SrCO 3 without catalytic DRM reactivity. As no Sm 2 O 2 CO 3 surface or bulk phase as a result of carbon dioxide activation was observed for any material – in contrast to La 2 O 2 CO 3 – we suggest that oxy-carbonate formation plays only a minor role for DRM reactivity. Rather, we identify surface graphitic carbon as the potentially reactive intermediate. Graphitic carbon has already been shown as a crucial reaction intermediate in metal-oxide DRM catalysts and appears both for Sm 1.5 Sr 0.5 NiO 4 and NiO/monoclinic Sm 2 O 3 after reaction as crystalline structure. It is significantly more pronounced for the latter due to the higher amount of oxygen-deficient monoclinic Sm 2 O 3 facilitating carbon dioxide activation. Despite the often reported beneficial role of earth alkaline dopants in DRM catalysis, we show that the situation is more complex. In our studies, the detrimental role of earth alkaline doping manifests itself in the exclusive formation of the sole stable carbonated species and a general destabilization of the Ni/monoclinic Sm 2 O 3 interface by favoring Ni particle sintering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Direct Simulations of H–He Mixtures at Planetary Interior Conditions: Demixing, Insulator–Metal Transition and Miscibility Boundaries

Accurate knowledge of the electrical and thermal conductivities and structural properties of hydrogen–helium mixtures under thermodynamic conditions within and beyond the immiscibility range is very important to predict the thermal evolution and internal structure of gas giant planets like Jupiter and Saturn. Here, we propose a novel method to determine the immiscibility boundary accurately without the need for free energy calculations, while providing consistent insights into structural and transport properties of mixtures. We show with direct large-scale ab initio simulations that the insulator–metal transition (IMT) of the hydrogen subsystem is strongly affected by an admixture with a small fraction of helium and occurs at temperatures significantly higher than those of pure hydrogen. At pressures below 150 GPa, the IMT boundary is not related anymore to the H 2 subsystem dissociation, the system remains insulating even after the full dissociation of H 2 molecules and its transition to an H–He mixture. The offset of the IMT in the H–He mixture relative to the dissociation region in the hydrogen subsystem and the significant reduction of static electrical and thermal conductivity by a factor between two and a few thousand relative to pure hydrogen found in mixtures have consequences for Jupiter and Saturn’s thermal evolution, internal structure, and dynamo action, affecting a large fraction of the interior of both planets.

Helium↗

DOE OSTI2021

An automated multi-component gas adsorption system (MC GAS)

The knowledge gap on adsorption of complex mixtures in the literature relative to single component data represents a persistent obstacle to developing accurate process models for adsorption separations. The collection of mixed gas adsorption data is an imminent need for improved understanding of the behavior of adsorbent systems in these diverse adsorption applications. Current approaches to understanding mixture adsorption using predictive theories based on pure component adsorption experiments often fail to capture the behavior of more complex, non-ideal systems. In this work, we present an automated volumetric instrument for the measurement of mixed gas adsorption isotherms. This instrument was validated by comparison to other in-house instruments and data available in the literature, and the binary adsorption measurements were found to be thermodynamically consistent. The automation of this instrument allows for rapid collection of high-quality mixture adsorption data.

47 OTHER INSTRUMENTATION↗

DOE OSTI2022

Optical properties of Mo and amorphous MoOx, and application to antireflection coatings for metals

To form antireflection (AR) coatings to hide metal architecture in display technologies, we deposited thin films of metal Mo and oxide MoOx by sputtering targets of various compositions using pure Ar sputter gas. The optical constants [n,k] of these samples were measured by the direct numerical solution of reflectance and transmittance at each wavelength point measured. We find that 50 nm films are uniform in the growth direction, but for thicker 100 nm samples, evidence exists for nonuniform growth, where the top 20 nm appears to be metal rich. From these [n,k], negative Tauc bandgap energies show these oxides are semi-metals. We then identified the specific composition (x) that optimizes the AR response for a host of metals (Al, Cu, Ag, Au). Finally, two methods were used to understand why these MoOx materials function well as AR media, including (i) using phasor rays and (ii) developing a universal expression for the AR condition that applies to both dielectric and metal substrates. In (i), we find two characteristics for AR of metals: (a) its optical thickness should be roughly π3, not the π2 for dielectrics, since for MoOx, their [r^ij,t^ij] Fresnel phases differ from the usual [180°, 0°] of dielectrics; and (b) the medium incorporates a k-dominant strategy whose function is to absorb the energy that is reflected at the AR/metal interface. In (ii), the universal AR condition is found to be r^01+r^12z^=0. For dielectrics, this reduces to the well-known nAR=nairnsub condition. However, for metals, a concise analytic expression is lacking since this expression is highly nonlinear but is easily solved by numerical methods.

Tsu, David V. (ORCID:0000000295903418)↗

DOE OSTI2021

Modeling Subsurface Explosions Recorded on a Distributed Fiber Optic Sensor

Fiber optic distributed acoustic sensors (DAS) are becoming a widely used tool for seismic sensing. Here we examine recordings of two subsurface chemical explosions, DAG-1 and DAG-3, each of which was about one metric ton (TNT equivalent), that were recorded from a helical fiber installed in two boreholes 80 m away from the source location. Several clear phases including the initial P wave, a weak S wave, and a surface reflected P wave are observed on the helical DAS data. We estimate a velocity model using arrival times measured from the fiber. The DAS waveform data were compared with colocated accelerometers at specific depths in both frequency and time domains. Furthermore, the spectra of the DAS data matched spectra estimated from the accelerometer records. Comparisons of observed waveform shape between the accelerometer records and the fiber measurements (strain-rate) show reasonable agreement except for the data near the event depth. The DAS data and the accelerometer agreed in relative amplitudes but we had difficulties in matching absolute amplitudes, possibly due to errors in metadata. Synthetic strain-rate waveforms were calculated using a 2D wavenumber algorithm and matched the waveform shape and relative amplitudes. In general, DAS is effective at recording strong ground motions at high spatial density. Comparison of the synthetic seismograms with observed data indicate that the waveforms are not consistent with a pure isotropic explosion source and that the observed S waves originate from very near the source region.

58 GEOSCIENCES↗

DOE OSTI2023

Exploring the hardness and high-pressure behavior of osmium and ruthenium-doped rhenium diboride solid solutions

Rhenium diboride (ReB 2 ) exhibits high differential strain due to its puckered boron sheets that impede shear deformation. Here, we demonstrate the use of solid solution formation to enhance the Vickers hardness and differential strain of ReB 2 . ReB 2 -structured solid solutions (Re 0.98 Os 0.02 B 2 and Re 0.98 Ru 0.02 B 2 , noted as “ReOsB 2 ” and “ReRuB 2 ”) were synthesized via arc-melting from the pure elements. In-situ high-pressure radial x-ray diffraction was performed in the diamond anvil cell to study the incompressibility and lattice strain of ReOsB 2 and ReRuB 2 up to ~56 GPa. Both solid solutions exhibit higher incompressibility and differential strain than pure ReB 2 . However, while all lattice planes are strengthened by doping osmium (Os) into the ReB 2 structure, only the weakest ReB 2 lattice plane is enhanced with ruthenium (Ru). These results are in agreement with the Vickers hardness measurements of the two systems, where higher hardness was observed in ReOsB 2 . The combination of high-pressure studies with experimentally observed hardness data provides lattice specific information about the strengthening mechanisms behind the intrinsic hardness enhancement of the ReB 2 system.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Electronic structure and lattice dynamics of 1⁢𝑇−VSe 2 : Origin of the three-dimensional charge density wave

To characterize in detail the charge density wave (CDW) transition of 1⁢𝑇−VSe 2 , its electronic structure and lattice dynamics are comprehensively studied by means of x-ray diffraction, muon spectroscopy, angle resolved photoemission (ARPES), diffuse and inelastic x-ray scattering, and state-of-the-art first-principles density functional theory calculations. Resonant elastic x-ray scattering does not show any resonant enhancement at either V or Se, indicating that the CDW peak at the 𝐾 edges describes a purely structural modulation of the electronic ordering. ARPES experiments identify (i) a pseudogap at 𝑇 > 𝑇⁢ CDW , which leads to a depletion of the density of states in the ML-M'L' plane at 𝑇 < 𝑇⁢ CDW , and (ii) anomalies in the electronic dispersion reflecting a sizable impact of phonons on it. A diffuse scattering precursor, characteristic of soft phonons, is observed at room temperature (RT) and leads to the full collapse of the low-energy phonon (𝜔 1 ) with propagation vector (0.25 0 −0.3) r.l.u. Here, we show that the frequency and linewidth of this mode are anisotropic in momentum space, reflecting the momentum dependence of the electron-phonon interaction (EPI), hence demonstrating that the origin of the CDW is, to a much larger extent, due to the momentum dependent EPI with a small contribution from nesting. The pressure dependence of the 𝜔 1 soft mode remains nearly constant up to 13 GPa at RT, with only a modest softening before the transition to the high-pressure monoclinic C2/m phase. The wide set of experimental data is well captured by our state-of-the art first-principles anharmonic calculations with the inclusion of van der Waals corrections in the exchange-correlation functional. The comprehensive description of the electronic and dynamical properties of VSe 2 reported here adds important pieces of information to the understanding of the electronic modulations in the family of transition-metal dichalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗