Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Integrated Multidisciplinary Optimization Objects

OpenMDAO is an open-source MDAO framework. It is used to develop an integrated analysis and design environment for engineering challenges. This Phase II project integrated additional modules and design tools into OpenMDAO to perform discipline-specific analysis across multiple flight regimes at varying levels of fidelity. It also showcased a refined system architecture that allows the system to be less customized to a specific configuration (i.e., system and configuration separation). By delivering a capable and validated MDAO system along with a set of example applications to be used as a template for future users, this work greatly expands NASA's high-fidelity, physics-based MDAO capabilities and enables the design of revolutionary vehicles in a cost-effective manner. This proposed work complements M4 Engineering's expertise in developing modeling and simulation toolsets that solve relevant subsonic, supersonic, and hypersonic demonstration applications.

Alston, Katherine↗
NASA NTRS2015

Development of an Ablative 3D Quartz / Cyanate Ester Composite for the Orion Spacecraft Compression Pad

With the successful flight test of the Orion Multipurpose Crew Vehicle last December, NASA is well on its way to sending humans into deep space with the goal of putting astronauts on Mars in the 2030s. Orion will receive some upgrades for its next launch in 2018 including a newly developed 3D Quartz Cyanate Ester composite material for the compression pad. The compression pads are 10-inches in diameter and 3-inches thick. The pucks are at 4 locations in the heat shield that serve as a part of the mechanism for holding the Crew and Service modules together during most mission phases prior to separation followed by Earth re-entry. Thus the compression pad has structural, aerothermal and thermal protection requirements.This paper describes the approach used for developing the new 3D composite, including continuous 3D weaving on an automated loom followed by resin transfer molding. Mechanical, thermal and arc jet testing of the 3D composite are also described.

Feldman, Jay↗
NASA NTRSDate not supplied

Airborne High Spectral Resolution Lidar Measurements of Aerosol Distributions and Properties During the NASA CAMP2Ex Mission

The NASA Clouds, Aerosols and Monsoon Processes-Philippines Experiment (CAMP2Ex) occurred during August-October, 2019,primarily over the ocean near the Philippines, including the ocean west of Luzon. CAMP2Ex attempts to characterize the role of anthropogenic and natural aerosol particles in modulating warm and mixed-phase precipitation in the maritime continent during the Southwest Monsoon. This mission is also examining relationships between spatial heterogeneity in the aerosol and cloud fields and radiative heating rates and studying the effects of aerosol concentration and composition on the microphysical properties of shallow cumulus and cumulus congestus clouds. Critical to the successful investigation of these objectives is profiling of aerosol, cloud and meteorological properties throughout the atmospheric column. For the CAMP2Ex experiment, we deployed the second generation NASA Langley airborne High Spectral Resolution Lidar (HSRL-2) on the NASA P-3 aircraft to obtain profile measurements of aerosol and thin cloud extinction and optical thickness via the HSRL technique at 355 and 532 nm, and of backscatter and depolarization at 355, 532, and 1064 nm. The HSRL technique allows for the independent measurement of extinction and backscatter without the need to assume modeled lidar ratios. Additional HSRL-2 data products include aerosol type, mixed layer depth, and range-resolved aerosol microphysical parameters. The HSRL measurements reveal the temporal, spatial, and vertical variability of aerosol optical properties over these locations. The HSRL-2 measured these backscatter, extinction, and depolarization profiles during all nineteen science flights and the transit flights to and from the aircraft operations base at Clark International Airport.In this presentation, we use these HSRL-2 measurements to show the horizontal and vertical distributions of aerosols in the CAMP2Ex operational area as well as provide insight into the optical and physical characteristics of these aerosols. We also discuss how these aerosols are distributed within and above the mixed layer.

aerosol↗
NASA NTRS1978

A 4.8 hour periodicity in the spectra of Cyg X-3

The X-ray spectra from three observations of the X-ray binary Cyg X-3 by the cosmic X-ray spectroscopy experiment on OSO can be represented by power-law continua with strong iron line emission. Comparisons of spectra taken within the same observation at various phases of the 4.8 hour period reveal a relative excess of low energy X-ray emission near zero phase (i.e. the minimum) of the 4.8 hour modulation. In addition, the centroid of the line emission is observed to vary in phase with the 4.8 hour cycle. The possibility of persistent thermal X-ray emission from material surrounding the binary system is introduced in an effort to account for the observed effects.

Becker, R. H.↗
NASA NTRS1978

A 4.8 hour periodicity in the spectra of Cygnus X-3

The X-ray binary Cyg X-3 has been observed on three occasions during 1975 and 1976 by the GSFC Cosmic X-Ray Spectroscopy Experiment on OSO 8. The X-ray spectra from all three observations can be represented by power-law continua with strong iron line emission. Comparisons of spectra taken within the same observation at various phases of the 4.8 hour period reveal a relative excess of low-energy X-ray emission near zero phase (i.e., the minimum) of the 4.8 hour modulation. In addition, the centroid of the line emission is observed to vary in phase with the 4.8 hour cycle. The possibility of persistent thermal X-ray emission from material surrounding the binary system is introduced in an effort to account for the observed effects.

Becker, R. H.↗
NASA NTRS1987

Galactic cosmic rays and anomalous components in the heliosphere

The progress made during 1983-1986 by U.S scientists on modulation of Galactic cosmic rays by the sun and on the origin, acceleration, and modulation of the anomalous components in the heliosphere is reviewed. In these years, simultaneous observations of modulation, covering a radial range from 1 to more than 30 AU and a heliospheric latitude range from 0 to greater than 20 deg, made it possible to investigate directly the dynamics and spatial scale of modulation during both the increasing and declining phases of solar activity and to make in situ correlations between changes in the interplanetary medium and changes in the modulation of cosmic rays. Particular attention is given to the use of the observations related to time-dependent modulation effects, curvature drifts, and anomalous components, as well as of the measurements of the cosmic-ray radial gradients and latitudinal intensity variations, in the modeling of solar modulation effects.

Mckibben, R. B.↗
NASA NTRS1979

Thermal and other tests of photovoltaic modules performed in natural sunlight

The nominal operating cell temperature (NOCT), an effective way to characterize the thermal performance of a photovoltaic module in natural sunlight, is developed. NOCT measurements for more than twenty different modules are presented. Changes in NOCT reflect changes in module design, residential roof mounting, and dirt accumulation. Other test results show that electrical performance is improved by cooling modules with water and by use of a phase change wax. Electrical degradation resulting from the marriage of photovoltaic and solar water heating modules is demonstrated. Cost-effectiveness of each of these techniques is evaluated.

Stultz, J. W.↗
NASA NTRS1989

Evidence for a high-mass white dwarf in nova V1500 Cygni 1975

Time-resolved spectroscopy of V1500 Cyg are presented from 1981, when the nebular lines from the nova ejecta had faded sufficiently to permit reliably radial velocity measurements on emission lines from the binary remnant. The spectra possess a typical AM Herculis signature. The wavelength region 3800-5100 A contains a number of strong lines, in particular the Balmer series and He II 4686 A. All lines show periodic velocity changes with the same period as the photometric variations. On the first night the lines are relatively weak and narrow, are in phase with the photometric cycle, and suffer extreme modulation; two months later they are strong and broad, are roughly 90 deg out of phase with the photometric cycle, and have relatively less variation in their line fluxes. These features support the suggestion that the remnant is an AM Her system. The observed radial velocity of the secondary is 193 + or - 9 km/s. Various constraints suggest that the magnetic white dwarf in this system has a mass over 0.9 solar.

Horne, Keith↗
NASA NTRS1991

Correction of magnetooptic device phase errors in optical correlators through filter design modifications

We address the problem of optical phase errors in an optical correlator introduced by the input and filter plane spatial light modulators. Specifically, we study a laboratory correlator with magnetooptic spatial light modulator (MOSLM) devices. We measure and characterize the phase errors, analyze their effects on the correlation process, and discuss a means of correction through a design modification of the binary phase-only optical filter function. The phase correction technique is found to produce correlation results close to those of an error-free correlator.

Downie, John D.↗
NASA NTRS2012

Quantum Limits of Space-to-Ground Optical Communications

For a pure loss channel, the ultimate capacity can be achieved with classical coherent states (i.e., ideal laser light): (1) Capacity-achieving receiver (measurement) is yet to be determined. (2) Heterodyne detection approaches the ultimate capacity at high mean photon numbers. (3) Photon-counting approaches the ultimate capacity at low mean photon numbers. A number of current technology limits drive the achievable performance of free-space communication links. Approaching fundamental limits in the bandwidth-limited regime: (1) Heterodyne detection with high-order coherent-state modulation approaches ultimate limits. SOA improvements to laser phase noise, adaptive optics systems for atmospheric transmission would help. (2) High-order intensity modulation and photon-counting can approach heterodyne detection within approximately a factor of 2. This may have advantages over coherent detection in the presence of turbulence. Approaching fundamental limits in the photon-limited regime (1) Low-duty cycle binary coherent-state modulation (OOK, PPM) approaches ultimate limits. SOA improvements to laser extinction ratio, receiver dark noise, jitter, and blocking would help. (2) In some link geometries (near field links) number-state transmission could improve over coherent-state transmission

laser communications↗
NASA NTRS1987

Method and apparatus for measuring minority carrier lifetime in a direct band-gap semiconductor

A direct band-gap semiconductor is exposed to intensity-modulated photon radiation having a characteristic energy at least as great as the energy gap of the semiconductor. This produces a time dependent concentration of excess charge carriers through the material, producing a luminescence signal modulated at the same frequency as the incident radiation but shifted in phase by an amount related to the lifetime of minority carriers. In a preferred embodiment, the phase shift of the luminescence signal is determined by transforming it to a modulated electrical signal and mixing the electrical signal with a reference signal modulated at the same frequency and having a phase which is known relative to the incident radiation. Minority carrier lifetime is calculated by integrating a direct current component of the mixed signal (F sub dc) over a 2 pi range in phase of the reference signal.

Vonroos, Oldwig↗
NASA NTRS1992

PARAS program: Phased array radio astronomy from space

An orbiting radio telescope is proposed which, when operated in a Very Long Baseline Interferometry (VLBLI) scheme, would allow higher (than currently available) angular resolution and dynamic range in the maps, and the ability of observing rapidly changing astronomical sources. Using a passive phases array technology, the proposed design consists of 656 hexagonal modules forming a 150 meter diameter dish. Each observatory module is largely autonomous, having its own photovoltaic power supply and low-noise receiver and processor for phase shifting. The signals received by the modules are channeled via fiber optics to the central control computer in the central bus module. After processing and multiplexing, the data is transmitted to telemetry stations on the ground. The truss frame supporting each observatory pane is a hybrid structure consisting of a bottom graphite/epoxy tubular triangle and rigidized inflatable Kevlar tubes connecting the top observatory panel and bottom triangle. Attitude control and stationkeeping functions are performed by a system of momentum wheels in the bus and four propulsion modules located at the compass points on the periphery of the observatory dish. Each propulsion module has four monopropellant thrusters and six hydrazine arcjets, the latter supported by a nuclear reactor. The total mass of the spacecraft is 22,060 kg.

Jakubowski, Antoni K.↗
NASA NTRS1992

Project PARAS: Phased array radio astronomy from space

An orbiting radio telescope is proposed which, when operated in a very long baseline interferometry (VLBI) scheme, would allow higher than currently available angular resolution and dynamic range in the maps and the ability to observe rapidly changing astronomical sources. Using passive phased array technology, the proposed design consists of 656 hexagonal modules forming a 150-m diameter antenna dish. Each observatory module is largely autonomous, having its own photovoltaic power supply and low-noise receiver and processor for phase shifting. The signals received by the modules are channeled via fiber optics to the central control computer in the central bus module. After processing and multiplexing, the data are transmitted to telemetry stations on the ground. The truss frame supporting each observatory panel is a novel hybrid structure consisting of a bottom graphite/epoxy tubular triangle and rigidized inflatable Kevlar tubes connecting the top observatory panel and the bottom triangle. Attitude control and station keeping functions will be performed by a system of momentum wheels in the bus and four propulsion modules located at the compass points on the periphery of the observatory dish. Each propulsion module has four monopropellant thrusters and four hydrazine arcjets, the latter supported by either a photovoltaic array or a radioisotope thermoelectric generator. The total mass of the spacecraft is about 20,500 kg.

Nuss, Kenneth↗
NASA NTRS2013

International Space Station (ISS) Soyuz Vehicle Descent Module Evaluation of Thermal Protection System (TPS) Penetration Characteristics

The descent module (DM) of the ISS Soyuz vehicle is covered by thermal protection system (TPS) materials that provide protection from heating conditions experienced during reentry. Damage and penetration of these materials by micrometeoroid and orbital debris (MMOD) impacts could result in loss of vehicle during return phases of the mission. The descent module heat shield has relatively thick TPS and is protected by the instrument-service module. The TPS materials on the conical sides of the descent module (referred to as backshell in this test plan) are exposed to more MMOD impacts and are relatively thin compared to the heat shield. This test program provides hypervelocity impact (HVI) data on materials similar in composition and density to the Soyuz TPS on the backshell of the vehicle. Data from this test program was used to update ballistic limit equations used in Soyuz TPS penetration risk assessments. The impact testing was coordinated by the NASA Johnson Space Center (JSC) Hypervelocity Impact Technology (HVIT) Group [1] in Houston, Texas. The HVI testing was conducted at the NASA-JSC White Sands Hypervelocity Impact Test Facility (WSTF) at Las Cruces, New Mexico. Figure

Davis, Bruce A.↗
NASA NTRS1985

The large-scale modulation of cosmic rays in mid-1982: Its dependence on heliospheric longitude and radius

Near solar maximum, a series of large radial solar wind shocks in June and July 1982 provided a unique opportunity to study the solar modulation of galactic cosmic rays with an array of spacecraft widely separated both in heliocentric radius and longitude. By eliminating hysteresis effects it is possible to begin to separate radial and azimuthal effects in the outer heliosphere. On the large scale, changes in modulation (both the increasing and recovery phases) propagate outward at close to the solar wind velocity, except for the near-term effects of solar wind shocks, which may propagate at a significantly higher velocity. In the outer heliosphere, azimuthal effects are small in comparison with radial effects for large-scale modulation at solar maximum.

Pyle, K. R.↗
NASA NTRS1991

Development of an intelligent hypertext system for wind tunnel testing

This paper summarizes the results of a system utilizing artificial intelligence technology to improve the productivity of project engineers who conduct wind tunnel tests. The objective was to create an intelligent hypertext system which integrates a hypertext manual and expert system that stores experts' knowledge and experience. The preliminary (Phase I) effort implemented a prototype IHS module encompassing a portion of the manuals and knowledge used for wind tunnel testing. The effort successfully demonstrated the feasibility of the intelligent hypertext system concept. A module for the internal strain gage balance, implemented on both IBM-PC and Macintosh computers, is presented. A description of the Phase II effort is included.

Lo, Ching F.↗
NASA NTRS1971

Decoder for delay-modulation coded data.

A decoding technique is described for the conversion of delay-modulated digital data to nonreturn to zero (NRZ) data. A potential time-phase ambiguity in reception and decoding of delay-modulated data is resolved in real time, through monitoring the data stream for a unique waveform inherent in delay-modulated data. Statistical backup is provided.

Lewin, J.↗
NASA NTRS1979

Evaluation of the JPL X-band 32 element active array

Tests performed on an X-band 32-element active array are described. Antenna pattern characteristics of the array were tested in its standard operating mode as well as several degraded performance modes, including failures of 1, 2, 3, 4, 8, 16, and 31 elements. Additionally, the array was characterized with the addition of a metallic shroud, and also characterized versus rf drive level and at a single off-axis electronic beamsteered position. Characterization was performed on several of the 3/4-watt, three-stage, X-band solid-state power amplifier modules. The characterization included swept amplitude response, amplitude and phase versus temperature from -20 to +60 C, and intermodulation distortion of selected modules. The array is described and conclusions and recommendations based upon the experience and results achieved are included.

Boreham, J. F.↗