Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase change composite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effect of Sn oxides on the thermal conductivity of polycrystalline SnSe

SnSe is a promising thermoelectric material, with intrinsically low lattice thermal conductivity, κL. Surprisingly, in several reports, polycrystalline samples are found to have a higher thermal conductivity than single crystals. This disparity has been attributed to trace amounts of thermally conductive Sn oxides at the grain boundaries of polycrystalline samples. The same culprit was recently proposed to explain the reduction of κL in purified, oxide-free, SnSe polycrystals. Here, we test this hypothesis by: (i) tuning the type of oxide in SnSe by exploiting thermodynamic stability regions, since Sn-rich or Sn-poor compositions favour the formation of SnO or SnO 2 , respectively; and (ii) varying the quantity of SnO 2 by intentionally oxidizing SnSe powder before consolidation, to obtain samples with quantifiable amounts - up to 15% - of SnO 2 . We find that the κL of SnSe is impervious to changes in the type or the amount of Sn oxide present in the samples. Our results show that a simple “rule of mixtures” cannot be used to estimate the effect of grain boundary oxides on the thermal conductivity of SnSe. These results call for an improved understanding of the intriguing thermal transport mechanisms in SnSe and numerous other systems where a two-phase transport is presumed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dynamic Barriers to Crystallization of Calcium Barium Carbonates

Metastable carbonates play important roles in geochemistry, biomineralization and serve as model systems for nonclassical theories of nucleation and growth. Balcite (Ca 0.5 Ba 0.5 CO 3 ) is a remarkable carbonate phase that is isostructural with a high-temperature modification of calcite (CaCO 3 ), yet can be synthesized at ambient conditions. Here, we investigate crystallization pathways in the Ba-Ca-CO 3 -H 2 O system, with a focus on the transformation of amorphous calcium barium carbonate (ACBC) to balcite and subsequent decomposition into the equilibrium calcite (CaCO3) and witherite (BaCO 3 ) phases. Density functional theory calculations show that balcite is an unstable solid solution (Ca 1-x BaxCO 3 , R 3¯ m) in the range 0.17 < x < 0.5, but is accessible through the amorphous ACBC precursor for x ≲ 0.5, and predict its decomposition into calcite and witherite. We confirm this pathway experimentally but found demixing to proceed slowly and remain incomplete even after 9 months. Nucleation kinetics of balcite from ACBC was assessed using a microfluidic assay, where increasing barium content led to a surprising increase in the balcite nucleation rate, despite decreasing thermodynamic driving force. We attribute crystallization rates that dramatically accelerate with time to changes in interfacial structure and composition during coarsening of the amorphous precipitate. By carefully quantifying the thermodynamic and kinetic contributions in the multistep crystallization of a metastable carbonate, we produce insights that allow us to better interpret the formation and persistence of metastable minerals in natural and synthetic environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effects of growth substrate on the nucleation of monolayer MoTe 2

The discovery and characterization of two-dimensional (2D) materials beyond graphene has increased dramatically over the past decade with increasingly fine control over the growth dynamics of these materials. MoTe 2 represents a model material for studying phase change properties of 2D materials due to small energy differences between its 2H semiconducting phase and 1T' semimetallic phase. Although some substrates are demonstrated to be better than others for the wafer-scale growth of high quality MoTe 2 films, substrate effects on the nucleation and growth of MoTe 2 are still not well understood. Here, we grow monolayer MoTe 2 by converting MoO x thin films deposited on three different substrates: sapphire Al 2 O 3 (0001), amorphous SiO 2 , and amorphous AlO x , and examine the early stages of the conversion reaction to elucidate the substrate effects on the nucleation of MoTe 2 . We observe that the chemical composition of the substrate is more important than the surface topography and crystallinity of the substrate, with high quality monolayer 2H MoTe 2 formed on both Al 2 O 3 (0001) and AlO x in contrast to mixed phase 2H/1T' MoTe 2 formed on SiO 2 , as determined by Raman spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coordination and thermophysical properties of select trivalent lanthanides in LiCl–KCl

The coordination chemistry of various fission and decay products, such as actinides and lanthanides, are crucial to the commercial deployment of molten salt reactors as they can affect the thermophysical properties. In this report we examined the structure, coordination environment, and physical properties such as the density and the vibrational density of states for three lanthanide species, namely Ce, Eu, and Sm in the LiCl–KCl eutectic system using a combination of quantum mechanics simulations and spectroscopic experiments. Quantum mechanics molecular dynamics (QM-MD) modelling was employed to determine the physical properties of each system resulting in accurate local coordination of each species. Then, the vibrational density of states (DOS) was determined using a two-phase thermodynamic modelling which was then compared to the experimentally obtained Raman spectra of the species in molten LiCl–KCl having the eutectic composition. We find that Ce 3+ , Eu 3+ and Sm 3+ all adopt octahedral local coordination environments in the eutectic salt composition in good agreement with experimental results. Ce3+ is found to fluctuate between an octahedral six-coordinated and a seven-coordinated structure due to the increased local proximity of Cl in the eutectic salt, resulting in a lower fluidicity/diffusivity than the other trivalent lanthanides studied. The thermophysical properties of the eutectic composition with trivalent lanthanides were not significantly different from the pure eutectic salt composition, but several changes were noted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Impact of volcanic eruptions on CMIP6 decadal predictions: a multi-model analysis

Abstract. In recent decades, three major volcanic eruptions of different intensity have occurred (Mount Agung in 1963, El Chichón in 1982 and Mount Pinatubo in 1991), with reported climate impacts on seasonal to decadal timescales that could have been potentially predicted with accurate and timely estimates of the associated stratospheric aerosol loads. The Decadal Climate Prediction Project component C (DCPP-C) includes a protocol to investigate the impact of volcanic aerosols on the climate experienced during the years that followed those eruptions through the use of decadal predictions. The interest of conducting this exercise with climate predictions is that, thanks to the initialisation, they start from the observed climate conditions at the time of the eruptions, which helps to disentangle the climatic changes due to the initial conditions and internal variability from the volcanic forcing. The protocol consists of repeating the retrospective predictions that are initialised just before the last three major volcanic eruptions but without the inclusion of their volcanic forcing, which are then compared with the baseline predictions to disentangle the simulated volcanic effects upon climate. We present the results from six Coupled Model Intercomparison Project Phase 6 (CMIP6) decadal prediction systems. These systems show strong agreement in predicting the well-known post-volcanic radiative effects following the three eruptions, which induce a long-lasting cooling in the ocean. Furthermore, the multi-model multi-eruption composite is consistent with previous work reporting an acceleration of the Northern Hemisphere polar vortex and the development of El Niño conditions the first year after the eruption, followed by a strengthening of the Atlantic Meridional Overturning Circulation the subsequent years. Our analysis reveals that all these dynamical responses are both model- and eruption-dependent. A novel aspect of this study is that we also assess whether the volcanic forcing improves the realism of the predictions. Comparing the predicted surface temperature anomalies in the two sets of hindcasts (with and without volcanic forcing) with observations we show that, overall, including the volcanic forcing results in better predictions. The volcanic forcing is found to be particularly relevant for reproducing the observed sea surface temperature (SST) variability in the North Atlantic Ocean following the 1991 eruption of Pinatubo.

Bilbao, Roberto (ORCID:0000000307294980)↗
NASA NTRS1995

The thermopower in the temperature range T(sub c)-1000K and the bank spectrum of Bi-based superconductors

The temperature dependencies of thermopower, S, in the range T = T(sub c)-1000K as well as of resistivity and Hall coefficient in the range T = T(sub c)-300K for the single-phase ceramic samples Bi2Sr2Ca(1-x)Nd(x)Cu2O(y) have been measured. It was found that the S(T) dependencies in normal phase have three characteristic regions. Despite the fact that the S(T) dependencies in Bi-based high-T(sub c) superconductors (HTSC) differ essentially from ones in Y-based HTSC at T = T(sub c)-300K, the main feature of theirs (S(T) = const at high temperatures) retains in samples investigated at T is greater than 620K. The results obtained have been analyzed on the basis of the narrow-band model with the use of assumption of slight asymmetry of the conductive band. The band spectrum parameters of the samples studied have been calculated. An analysis of the tendencies in these parameters changes with samples composition varying enables to make the conclusion about the similarity of the main features of the conductive band structure in Y- and Bi-based HTSC.

Gasumyants, V. E.↗
DOE OSTI2021

Neutron Irradiation Induced Changes in Isotopic Abundance of 6Li and 3D Nanoscale Distribution of Tritium in LiAlO2 Pellets Analyzed by Atom Probe Tomography

Tritium, a radioactive isotope of hydrogen is produced by neutron irradiation of 6Li enriched LiAlO2 pellets in Tritium producing burnable absorber rods (TPBARs). Three-dimensional nanoscale mapping of Tritium in irradiated pellets is critical to understand its spatial variation and its association with various microstructural features in the pellets. Spatially resolved analysis of 6Li isotopic enrichment in such ceramic pellets before and after irradiation can provide insights to heterogeneities in Li isotopic distribution. However, Li being a light isotope, its spatially resolved compositional or isotopic analysis is a challenging task to most analytical methods. Here we used atom probe tomography, to evaluate the Li isotopic enrichment in both the LiAlO¬2 matrix and the Li deficient secondary phase LiAl5O8 before irradiation. These results were then compared with 6Li isotopic ratio measured by APT analysis of neutron irradiated pellets to clearly demonstrate the unique capability of APT to quantitatively analyze the isotopic enrichment of 6Li as well as for other light elements present in these materials. Evidence for heterogenous nanoscale distribution of 3H and O3H within irradiated pellet microstructure is also provided, which is attributed to 3H trapping in irradiation induced vacancy clusters or voids within the LiAlO2 matrix. The characterization results given here, now prove the feasibility for using APT for analyzing nanoscale spatially resolved isotopic enrichment of Li as well as other light elements such as Tritium in TPBARs. This work also paves way to adopt APT for analyzing light elements such as Li and tritium in materials used for nuclear fusion reactor applications, geochemistry, astrophysics as well as for energy storage applications.

Devaraj, Arun↗
DOE OSTI2023

The Effects of Silicon and Niobium Concentration on the Solidification Behavior and Microstructure of Cast Monel Alloys

Cast Monel alloys are used in applications requiring a combination of good mechanical properties and excellent resistance to corrosion. Despite prevalent industrial use, relatively few studies have been conducted to investigate the relationships between composition, solidification behavior, and microstructure. Given that these alloys are used in the cast and welded conditions, these factors have a significant influence over the material properties. Here, in this work, microstructural characterization, electron probe microanalysis, X-ray diffraction, and differential scanning calorimetry were used to study how changes in Si and Nb concentrations affected the solidification path and microstructure of Monel alloys. It was found that increasing Nb concentration stabilized higher amounts of MC carbides and suppressed graphite formation during solidification. It was also found that the high nominal concentration and segregation of Si to the liquid led to the formation of Ni 31 Si 12 and other silicides via terminal eutectic reactions at the end of solidification. A pseudo-binary solidification diagram was constructed using experimental data and was applied to predict the mass fraction of solidified eutectic as a function of composition. The modeled microstructures were found to be in good agreement with experimentally measured phase fractions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Applications of Strain-Coupled Magnetoelectric Composites

This article deals with research, development and future directions of magnetoelectric composites for practical devices applications. In the past 20 years there has been a surge of research in the area of multiferroics (MF) and magnetoelectrics (ME) due to their potential to replace existing technologies based only on ferroelectric or ferromagnetic materials. Some of the magnetoelectric composites show exceptionally high potential in the area of magnetic field sensors, however, work remains before commercialization can be realized. The cross coupling among various ferroic parameters in magnetoelectric composites is several orders higher than single phase magetoelectrics, which make its favorable for low detection (nT or pT) magnetic field sensors. Advances in both layered structures or controlled three-dimensional matrix composites for applications as magnetoelectric nonvolatile memory elements are both required. Robust cross-coupling among various parameters with more than four logic states and its compatibility with complementary-symmetry metal–oxide–semiconductor (CMOS) technology are the main requirements for heterostructure magnetoelectric thin films. The major hurdles in the area of magnetoelectric nonvolatile memory elements are poor interfacial properties and weak magnetoelectric coupling for high density fast read and write processes. Another potential area is strained coupled magneto-electric composites where magnetostriction mediated dimensional change in the magnetic layer effectively modulate the change in the dimension of piezoelectric layers via piezostriction, which leads to a strong ME coupling where their coupling magnitude is sufficient for magnetic field sensors. Energy harvesters based on magnetoelectric composites are also intriguing concepts to capture various types of waste energy, in the form mechanical vibration, pressure, wind energy, hydrothermal and waste temperature.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Thermal and Chemical Characterization of Non-metallic Materials Using Coupled Thermogravimetric Analysis and Infrared Spectroscopy

Thermogravimetric analysis (TGA) is widely employed in the thermal characterization of non-metallic materials, yielding valuable information on decomposition characteristics of a sample over a wide temperature range. However, a potential wealth of chemical information is lost during the process, with the evolving gases generated during thermal decomposition escaping through the exhaust line. Fourier Transform-Infrared spectroscopy (FT-IR) is a powerful analytical technique for determining many chemical constituents while in any material state, in this application, the gas phase. By linking these two techniques, evolving gases generated during the TGA process are directed into an appropriately equipped infrared spectrometer for chemical speciation. Consequently, both thermal decomposition and chemical characterization of a material may be obtained in a single sample run. In practice, a heated transfer line is employed to connect the two instruments while a purge gas stream directs the evolving gases into the FT-IR, The purge gas can be either high purity air or an inert gas such as nitrogen to allow oxidative and pyrolytic processes to be examined, respectively. The FT-IR data is collected real-time, allowing continuous monitoring of chemical compositional changes over the course of thermal decomposition. Using this coupled technique, an array of diverse materials has been examined, including composites, plastics, rubber, fiberglass epoxy resins, polycarbonates, silicones, lubricants and fluorocarbon materials. The benefit of combining these two methodologies is of particular importance in the aerospace community, where newly developing materials have little available data with which to refer. By providing both thermal and chemical data simultaneously, a more definitive and comprehensive characterization of the material is possible. Additionally, this procedure has been found to be a viable screening technique for certain materials, with the generated data useful in the selection of other appropriate analytical procedures for further material characterization.

Huff, Timothy L.↗
NASA NTRS2004

Effects of Subsurface Sampling & Processing on Martian Simulant Containing Varying Quantities of Water

The presence of water-ice in the Martian subsurface is a subject of much debate and excited speculation. Recent results from the gammaray spectrometer (GRS) on board NASA's Mars Odyssey spacecraft indicate the presence of large amounts of hydrogen in regions of predicted ice stability. The combination of chemistry, low gravitational field (3.71 m/s(exp 2)) and a surface pressure of about 6.36 mbar at the mean radius, place limits on the stability of H2O on the surface, however, results from the GRS indicate that the hydrogen rich phase may be present at a depth as shallow as one meter in some locations on Mars. The potential for water on Mars leads directly to the speculation that life may once have existed there, since liquid water is the unifying factor for environments known to support life on Earth. Lubricant-free drilling has been considered as a means of obtaining water-rich subsurface samples on Mars, and two recent white papers sponsored by the Mars Program have attempted to identify the problems associated with this goal. The two major issues identified were: the engineering challenges of drilling into a water-soil mixture where phase changes may occur; and the potential to compromise the integrity of in-situ scientific analysis due to contamination, volatilization, and mineralogical or chemical changes as a result of processing. This study is a first attempt to simulate lubricantfree drilling into JSC Mars-1 simulant containing up to 50% water by weight. The goal is to address the following: 1) Does sample processing cause reactions or changes in mineralogy which will compromise the interpretation of scientific measurements conducted on the surface? 2) Does the presence of water-ice in the sample complicate (1)? 3) Do lubricant-free drilling and processing leave trace contaminants which may compromise our understanding of sample composition? 4) How does the torque/power required for drilling change as a function of water content and does this lead to unexpected thermal effects?

Menard, J.↗
NASA NTRS2023

Dispersion and Aging of Volcanic Aerosols after the La Soufriere Eruption in April 2021

Volcanic aerosols change the atmospheric composition and thereby affect weather and climate. Aerosol dynamic processes such as nucleation, condensation, and coagulation modify the shape, size, and mass of aerosol particles, which influence their atmospheric lifetime and radiative properties. Nevertheless, most models omit these processes for ash particles. In this work, we explore the ash aerosol aging and sulfate production during the first 4 days following the 2021 La Soufrière (St. Vincent) eruption with the ICON-ART model (ICOsahedral Nonhydrostatic model with Aerosol and Reactive Trace gases). Online coupling of ICON-ART with a one-dimensional volcanic plume model calculates volcanic emission, which makes it possible to resolve the different eruption phases of the noncontinuous La Soufrière eruption. We compared our simulated aerosol distribution and composition with observations from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument, the Multiangle Imaging SpectroRadiometer (MISR) Research Aerosol (RA) Algorithm, and the Barbados Cloud Observatory (BCO). We show that online coupling is essential to adequately model the emissions and plume development close to the volcano. The modeled aerosol aging is in very good agreement with observations from MISR near the emission source and with CALIOP at larger distances. Furthermore, particle aging occurs faster in the troposphere than in the stratosphere due to the availability of water vapor and OH, but a layer of coated ash appears at the plume top due to faster oxidation of SO2 and lofting by aerosol-radiation interaction. This paper gives the first direct comparison of aerosol aging in volcanic eruption plumes between simulations and observations

volcanic aerosols↗
NASA NTRS1994

Laboratory Investigation of the Growth and Crystal Structure of Nitric Acid Hydrates by Transmission Electron Microscopy (TEM)

A great deal of recent laboratory work has focussed on the characterization of the nitric acid hydrates, thought to be present in type I Polar Stratospheric Clouds (PSCs). Phase relationships and vapor pressure measurements (1-3) and infrared characterizations (4-5) have been made. However, the observed properties of crystalline solids (composition, melting point, vapor pressure, surface reactivity, thermodynamic stability, extent of solid solution with other components, etc.) are controlled by their crystal structure. The only means of unequivocal structural identification for crystalline solids is diffraction (using electrons, X-rays, neutrons, etc.). Other observed properties of crystalline solids, such as their infrared spectra, their vapor pressure as a function of temperature, etc. yield only indirect information about what phases are present, their relative proportions, or whether they are crystalline or amorphous.

Blake, David F.↗
DOE OSTI2022

Understanding Lithium Local Environments in LiMn 0.5 Ni 0.5 O 2 Cathodes: A DFT-Supported 6 Li Solid-State NMR Study

LiMn 0.5 Ni 0.5 O 2 has been plagued by the structural failure driven by the irreversible phase change upon subsequent cycling and the structural degradation caused by the seemingly unavoidable Li/Ni exchange. This begs for a better understanding of the correlation between lithium local structures, synthesis conditions, and overall electrochemical properties of materials. In this study, we use density functional theory (DFT) to assist experimental 6 Li solid-state magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy to understand the nature and change in lithium local structures with extended annealing times (168 vs 15 h) synthesized at 900 °C. To correlate the NMR peak changes after different synthesis conditions, we calculated the NMR spectra of representative low-energy model configurations of LiMn 0.5 Ni 0.5 O 2 composition–zigzag, row, and flower structures–as well as the influence of Ni/Mn ordering and Li/Ni exchange on each spectrum using a supercell that is large enough to allow us to consider the effect of different relative configurations of adjacent transition metal (TM) layers. The analysis based on a combination of the calculated NMR and the experimental spectra suggests that most configurations contributing to the experimental spectra are in fact composed of a blend of configurations higher in energy than the classical well-ordered ground-state structures. Further, the extended annealing of LiMn 0.5 Ni 0.5 O 2 slightly enhances Ni/Mn and Li/Mn orderings while reducing the Li/Ni mixing ratio. This study shows how DFT calculations are crucial in providing a better understanding of the experimental characterization data and therefore local environments and domain structures in oxide materials, such as Li-ion battery cathodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

On the Importance of the Convective Urca Process in 3D Simulations of a Simmering White Dwarf

Type Ia supernovae are bright thermonuclear explosions that are important to numerous areas of astronomy. However, the origins of these events are poorly understood. One proposed setting is that of a near Chandrasekhar mass white dwarf that undergoes runaway carbon burning in the core. During the thousand years leading up to the explosion, the white dwarf undergoes a simmering phase where slow carbon burning heats the core and drives convection. A poorly understood aspect of this phase is the convective Urca process, which links convection with weak nuclear reactions. We use the low Mach number code MAESTROeX to perform full 3D simulations as is required to accurately capture the turbulent convection. We present simulations with and without the A=23 convective Urca process, which have relaxed to a steady state. We characterize the effects of the convective Urca process on the neutrino losses, the nuclear energy generation, and the convective boundary. We find that the size of the convection zone is substantially reduced by the convective Urca process, though convection still extends past the Urca shell. Our findings on the structure of the convective zone and the compositional changes can be used to inform 1D stellar models that track the longer-timescale evolution.

FOS: Physical sciences↗
NASA NTRS2017

Chemical and Microstructural Changes in Metallic and Ceramic Materials Exposed to Venusian Surface Conditions

The chemical and microstructural behavior of steels (304, 310, 316, and 1018), nickel-based alloys (beta-NiAl, G30, and 625), gold, coatings (4YSZ, SilcoNert(TradeMark) 1040 (SilcoTek Co.), Dursan(TradeMark) (SilcoTek Co.), and porcelain), and bulk ceramics (alpha-Al2O3, fused quartz, beta-SiC, and alpha-Si3N4) were probed after exposure to supercritical fluid with temperature, pressure, and composition mimicking the Venus lower atmosphere. Exposures were carried out in the Glenn Extreme Environments Rig (GEER) chamber with the Venusian gas mixture (96.5% CO2, 3.5% N2, 30 ppm H2O, 150 ppm SO2, 28 ppm CO, 15 ppm OCS, 3 ppm H2S, 0.5 ppm HCl, and 5 ppb HF) at 92 bar (1330 psi) and 467 C (873 F) for durations of 10 and 42 days. An additional 21-day exposure was done to stainless steel uncoated and coated with SilcoNert(TradeMark) and Dursan(TradeMark). Samples were characterized before and after the experiment by gravimetric analysis, X-ray diffraction, X-ray photoelectron and Auger electron spectroscopies, and cross section electron microscopy analysis. All steels exposed for 10 and 42 days formed double-layered scales consisting mainly of metal (Cr, Fe, Ni) oxides and sulfides showing different chemistry, microstructure, and crystalline phases. The alloys G30 and 625 formed double-layered scales consisting mainly of nickel sulfides. After 10 days, the beta-NiAl exhibited no detectable scale, suggesting only a very thin film was formed. The 304 and 316 stainless steels coated with 4YSZ that were exposed for 10 and 42 days exhibited no significant oxidation. Steel 1018 coated with 4YSZ exhibited a corrosion scale of iron and/or chromium oxide formed at the base of the alloy. The 304 steel coated with porcelain did not exhibit corrosion, although the coating exhibited recession. SilcoNert(TradeMark) exposed for 10 and 42 days exhibited recession, although no oxidation was found to occur at the base of the alloy. Stainless steel 316 coated with Dursan(TradeMark)  exhibited corrosion at the base of the alloy. All ceramics tested showed no clear evidence of reaction. The weight-gain-per-area performance of the materials exposed in the GEER for 10 and 42 days are reported from the lowest to the highest weight gain per area as follows: gold did not exhibit any weight change; nickel-based alloys: beta- NiAl < G30 < 625; steels: 304 < 310 < 316 < 1018; ceramics: considering the experimental uncertainties, no weight change was observed for all ceramics of this work (alpha-Al2O3, Si3N4, SiC, and amorphous SiO2).

Costa, Gustavo C. C.↗
DOE OSTI2021

Determination of Thermal Expansion, Defect Formation Energy, and Defect-Induced Strain of α-U Via ab Initio Molecular Dynamics

Uranium (U) is often alloyed with molybdenum (Mo) or zirconium (Zr) in order to stabilize its high-temperature body-centered cubic phase for use in nuclear reactors. However, in all metallic fuel forms, the α phase of U remains in some fraction. This phase decomposition due to temperature or compositional variance can play an outsized role on fuel performance and microstructural evolution. Relatively little is known about fundamental point defect properties in α -U at non-zero temperatures, from either computational or experimental studies. This work performs the first thorough evaluation of the α phase of U via ab initio molecular dynamics (AIMD). A number of thermophysical properties are calculated as a function of temperature, including equilibrium lattice parameters, thermal expansion, and heat capacity. These results indicate a two-region behavior, with the transition at 400 K. The thermal expansion/contraction in the a / b direction occurs rapidly from 100 up to 400 K, after which a more linear and gradual change in the lattice constant takes place. The volumetric expansion matches experiments quantitatively, but the individual lattice constant expansion only matches experiments qualitatively. Point defect formation energies and induced lattice strains are also determined as a function of temperature, providing insight on defect populations and the fundamentals of irradiation growth in α -U. Interstitials induce significantly more strain than vacancies, and the nature of that strain is highly dependent on the individual lattice directions. The direction of point defect-induced lattice strain is contrary to the irradiation growth behavior of α -U. This work shows that isolated point defects cannot be the primary driving force responsible for the significant irradiation-induced growth of α -U observed experimentally.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2019

Anti-Glitches in the Ultraluminous Accreting Pulsar NGC 300 ULX-1 Observed with NICER

We present evidence for three spin-down glitches (or “anti-glitches”) in the ultraluminous accreting X-ray pulsar NGC 300 ULX-1, in timing observations made with the Neutron Star Interior Composition Explorer. Our timing analysis reveals three sudden spin-down events of magnitudes Δν=−23, −30, and −43 μHz (fractional amplitudes Δν/ν=−4.4, −5.5, and −7.7×10−4). We determined fully phase-coherent timing solutions through the first two glitches, giving us high confidence in their detection, while the third candidate glitch is somewhat less secure. These are larger in magnitude (and opposite in sign) than any known radio pulsar glitch. This may be caused by the prolonged rapid spin up of the pulsar, causing a sudden transfer of angular momentum between the superfluid and non-superfluid components of the star. We find no evidence for profile or spectral changes at the epochs of the glitches, supporting the conclusion that these are due to the same process as in normal pulsar glitches, but in reverse.

Paul S Ray↗