Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “patch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Suppression of star formation in low-mass galaxies caused by the reionization of their local neighbourhood

Photoheating associated with reionization suppressed star formation in low-mass galaxies. Reionization was inhomogeneous, however, affecting different regions at different times. To establish the causal connection between reionization and suppression, we must take this local variation into account. We analyze the results of CoDa (‘Cosmic Dawn’) I, the first fully coupled radiation-hydrodynamical simulation of reionization and galaxy formation in the Local Universe, in a volume large enough to model reionization globally but with enough resolving power to follow all atomic-cooling galactic halos in that volume. For every halo identified at a given time, we find the redshift at which the surrounding IGM reionized, along with its instantaneous star formation rate (‘SFR’) and baryonic gas-to-dark matter ratio (M gas /M DM ). The average SFR per halo with M < 10 9 M ⊙ was steady in regions not yet reionized, but declined sharply following local reionization. For M > 10 10 M ⊙ , this SFR continued through local reionization, increasing with time, instead. For 10 9 M ⊙ < M < 10 10 M ⊙ , the SFR generally increased modestly through reionization, followed by a modest decline. In general, halo SFRs were higher for regions that reionized earlier. A similar pattern was found for M gas /M DM , which declined sharply following local reionization for M < 10 9 M ⊙ . Local reionization time correlates with local matter overdensity, which determines the local rates of structure formation and ionizing photon consumption. The earliest patches to develop structure and reionize ultimately produced more stars than they needed to finish and maintain their own reionization, exporting their ‘surplus’ starlight to help reionize regions that developed structure later.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

A scanning-to-incision switch in TFIIH-XPG induced by DNA damage licenses nucleotide excision repair

Nucleotide excision repair (NER) is critical for removing bulky DNA base lesions and avoiding diseases. NER couples lesion recognition by XPC to strand separation by XPB and XPD ATPases, followed by lesion excision by XPF and XPG nucleases. Here, we describe key regulatory mechanisms and roles of XPG for and beyond its cleavage activity. Strikingly, by combing single-molecule imaging and bulk cleavage assays, we found that XPG binding to the 7-subunit TFIIH core (coreTFIIH) stimulates coreTFIIH-dependent double-strand (ds)DNA unwinding 10-fold, and XPG-dependent DNA cleavage by up to 700-fold. Simultaneous monitoring of rates for coreTFIIH single-stranded (ss)DNA translocation and dsDNA unwinding showed XPG acts by switching ssDNA translocation to dsDNA unwinding as a likely committed step. Pertinent to the NER pathway regulation, XPG incision activity is suppressed during coreTFIIH translocation on DNA but is licensed when coreTFIIH stalls at the lesion or when ATP hydrolysis is blocked. Moreover, ≥15 nucleotides of 5'-ssDNA is a prerequisite for efficient translocation and incision. Our results unveil a paired coordination mechanism in which key lesion scanning and DNA incision steps are sequentially coordinated, and damaged patch removal is only licensed after generation of ≥15 nucleotides of 5'-ssDNA, ensuring the correct ssDNA bubble size before cleavage.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Solutal-buoyancy-driven intertwining and rotation of patterned elastic sheets

Abstract The intertwining of strands into 3D spirals is ubiquitous in biology, enabling functions from information storage to maintenance of cell structure and directed locomotion. In synthetic systems, entwined fibers can provide superior mechanical properties and act as artificial muscle or structural reinforcements. Unlike structures in nature, the entwinement of synthetic materials typically requires application of an external stimulus, such as mechanical actuation, light, or a magnetic field. Herein, we use computational modeling to design microscale sheets that mimic biology by transducing chemical energy into mechanical action, and thereby self-organize and interlink into 3D spirals, which spontaneously rotate. These flexible sheets are immersed in a fluid-filled microchamber that encompasses an immobilized patch of catalysts on the bottom wall. The sheets themselves can be passive or active (coated with catalyst). Catalytic reactions in the solution generate products that occupy different volumes than the reactants. The resulting density variations exert a force on the fluid (solutal buoyancy force) that causes motion, which in turn drives the interlinking and collective swirling of the sheets. The individual sheets do not rotate; rotation only occurs when the sheets are interlinked. This level of autonomous, coordinated 3D structural organization, intertwining, and rotation is unexpected in synthetic materials systems operating without external controls. Using physical arguments, we identify dimensionless ratios that are useful in scaling these ideas to other systems. These findings are valuable for creating materials that act as “machines”, and directing soft matter to undergo self-sustained, multistep assembly that is governed by intrinsic chemical reactions.

Manna, Raj Kumar (ORCID:0000000322729487)↗
DOE OSTI2025

Study of the connected four-point correlation function of galaxies from the DESI Data Release 1 luminous red galaxy sample

We present a measurement of the non-Gaussian four-point correlation function (4PCF) from the DESI DR1 luminous red galaxy (LRG) sample. For the gravitationally induced parity-even 4PCF, we detect a signal with a significance of 14.7⁢𝜎 using our fiducial setup. We assess the robustness of this detection through a series of validation tests, including auto and cross-correlation analyses, sky partitioning across multiple patch combinations, and variations in radial scale cuts. Due to the low completeness of the sample, we find that differences in fiber assignment implementation schemes can significantly impact estimation of the covariance and introduce biases in the data vector. After correcting for these effects, all tests yield consistent results. This is one of the first measurements of the connected 4PCF on the DESI LRG sample; the good agreement between the simulation and the data implies that the amplitude of the density fluctuation inferred from the connected 4PCF is consistent with the Planck Λ⁢ CDM cosmology. The methodology and diagnostic framework established in this work provide a foundation for interpreting parity-odd 4PCF.

Cosmology↗
DOE OSTI2025

SPT-3G D1: Constraints on inflationary gravitational waves with two years of SPT-3G data

Here, we present a measurement of the 𝐵-mode polarization power spectrum of the cosmic microwave background anisotropies at 32 ≤ ℓ < 502 for three bands centered at 95, 150, and 220 GHz using data from the SPT-3G receiver on the South Pole Telescope. This work uses SPT-3G observations from the 2019 and 2020 winter observing seasons of a ∼1500 deg 2 patch of sky that directly overlaps with fields observed with the BICEP/Keck family of telescopes and covers part of the proposed Simons Observatory and CMB-S4 deep fields. Employing new techniques for mitigating polarized atmospheric noise, the SPT-3G data demonstrates a white noise level of 9.3 (6.7) μ⁢K−arcmin at ℓ ∼500 for the 95 GHz (150 GHz) data, with a 1/ℓ noise knee at ℓ = 128 (182). We fit the observed six auto- and cross-frequency 𝐵-mode power spectra to a model including lensed Λ⁢CDM 𝐵-modes and a combination of Galactic and extragalactic foregrounds. This work characterizes foregrounds in the vicinity of the BICEP/Keck survey area, finding foreground power consistent with that reported by the BICEP/Keck collaboration within the same region and a factor of ∼3 higher power over the full SPT-3G survey area. Using SPT-3G data over the BICEP/Keck survey area, we place a 95% upper limit on the tensor-to-scalar ratio of 𝑟 <0.25 and find the statistical uncertainty on 𝑟 to be 𝜎⁡(𝑟) = 0.067.

Zebrowski, J. A. [University of Chicago; Universit↗
DOE OSTI2023

Entanglement structures in quantum field theories. II. Distortions of vacuum correlations through the lens of local observers

When observing a quantum field via detectors with access to only the mixed states of spatially separated, local regions—a ubiquitous experimental design—the capacity to access the full extent of distributed entanglement can be limited, shrouded by classical correlations. By performing projective measurements of the field external to two detection patches and classically communicating the results, underlying pure states may be identified for which entanglement quantification is clear. In the Gaussian continuous-variable states of the free scalar field vacuum, this protocol uncovers a disparity between the spacelike entanglement established within the field and that which is locally detectable. Further, this discrepancy is found to grow exponentially with the separation between observation regions. The protocol developed herein offers insight and practical guidance for clarifying the unavoidable distortion of quantum field correlations when viewed from the vantage of a pair of local observers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Intelligent Metasurfaces with Continuously Tunable Local Surface Impedance for Multiple Reconfigurable Functions

Electromagnetic metasurfaces can be characterized as intelligent if they are able to perform multiple tunable functions, with the desired response being controlled by a computer influencing the individual electromagnetic properties of each metasurface inclusion. Here, we present an example of an intelligent metasurface that operates in the reflection mode in the microwave frequency range. We numerically show that, without changing the main body of the metasurface, we can achieve tunable perfect absorption and tunable anomalous reflection. The tunability features can be implemented using mixed-signal integrated circuits (ICs), which can independently vary both the resistance and reactance, offering complete local control over the complex surface impedance. The ICs are embedded in the unit cells by connecting two metal patches over a thin grounded substrate and the reflection property of the intelligent metasurface can be readily controlled by a computer. Our intelligent metasurface can have a critical influence on future space-time modulated metasurfaces and a multitude of applications, such as beam steering, energy harvesting, and communications.

42 ENGINEERING↗
DOE OSTI2019

Anomalous charge noise in superconducting qubits

In this work, we have used Ramsey tomography to characterize charge noise in a weakly charge-sensitive superconducting qubit. We find a charge noise that scales with frequency as1/f α over five decades with α = 1.93 and a magnitude S q (1Hz) = 2.9 × 10 –4 e 2 /Hz . The noise exponent and magnitude of the low-frequency noise are much larger than those seen in prior work on single electron transistors, yet are consistent with reports of frequency noise in other superconducting qubits. Furthermore, we confirm frequent large-amplitude jumps in offset charge exceeding 0.1e; these large discrete charge jumps are incompatible with a picture of localized dipolelike two-level fluctuators. The data reveal an unexpected dependence of charge noise on device scale and suggest models involving either charge drift or fluctuating patch potentials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Valley magnetism, nematicity, and density wave orders in twisted bilayer graphene

We analyze density wave and Pomeranchuk orders in twisted bilayer graphene. This complements our earlier analysis of the pairing instabilities. We assume that near half filling of either conduction or valence band, the Fermi level is close to Van Hove points, where the density of states diverges, and study potential instabilities in the particle-hole channel within a patch model with two valley degrees of freedom. The hexagonal symmetry of twisted bilayer graphene allows for either six or twelve Van Hove points. We consider both cases and find the same two leading candidates for particle-hole order. One is an SU(2)-breaking spin state with ferromagnetism within a valley. A subleading intervalley hopping induces antiferromagnetism between the valleys. The same state has also been obtained in strong-coupling approaches, indicating that this order is robust. Here, the other is a mixed state with 120° complex spin order and orthogonal complex charge order. In addition, we find a weaker but still attractive interaction in nematic channels, and discuss the type of a nematic order.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Decagonal Sn clathrate on d-Al-Ni-Co

Decagonal quasiperiodic ordering of Sn thin films on d-Al-Ni-Co is shown based on scanning tunneling microscopy (STM), low-energy electron diffraction, and density functional theory (DFT). Interestingly, the decagonal structural correlations are partially retained even up to a large film thickness of 10 nm grown at 165±10K. The nucleation centers called “Sn white flowers” identified by STM at submonolayer thickness are recognized as valid patches of the decagonal clathrate structure with low adsorption energies of these motifs. Due to the excellent lattice matching (to within 1%) between columns of Sn dodecahedra in the clathrate structure and pentagonal motifs at the d-Al-Ni-Co surface, the interfacial energy favors clathrate over the competing Sn crystalline forms. DFT study of the Sn/Al-Ni-Co composite model shows good mechanical stability, as shown by the work of separation of Sn from Al-Ni-Co slab that is comparable to the clathrate self-separation energy. Finally, the relaxed surface terminations of the R 2 T 4 clathrate approximant are in self-similarity correspondence with the motifs observed in the STM images from monolayer to the thickest Sn film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Inhomogeneous magnetism in the doped kagome lattice of LaCuO2.66

The hole-doped kagome lattice of Cu2+ ions in LaCuO2.66 was investigated by nuclear quadrupole resonance (NQR), electron spin resonance (ESR), electrical resistivity, bulk magnetization and specific heat measurements. For temperatures above 180 K, the spin and charge properties show an activated behavior suggestive of a narrow-gap semiconductor. At lower temperatures, the results indicate an insulating ground state which may or may not be charge ordered. While the frustrated spins in remaining patches of the original kagome lattice might not be directly detected here, the observation of coexisting non-magnetic sites, free spins and frozen moments reveals an intrinsically inhomogeneous magnetism. Numerical simulations of a 1/3-diluted kagome lattice rationalize this magnetic state in terms of a heterogeneous distribution of cluster sizes and morphologies near the site-percolation threshold.

Julien, M. -H.↗
DOE OSTI2017

Optical properties of highly compressed polystyrene: An ab initio study

Using all-electron density functional theory, we have performed an ab initio study on x ray absorption spectra of highly compressed polystyrene (CH). Here, we found that the K-edge shifts in strongly coupled, degenerate polystyrene cannot be explained by existing continuum-lowering models adopted in traditional plasma physics. To gain insights into the K edge shift in warm, dense CH, we have developed a model designated as “single-mixture-in-a-box” (SMIAB), which incorporates both the lowering of continuum and the rising of Fermi surface resulting from high compression. This simple SMIAB model correctly predicts the K-edge shift of carbon in highly compressed CH in good agreement with results from quantum-molecular-dynamics (QMD) calculations. Traditional opacity models failed to give the proper K-edge shifts as the CH density increased. Based on QMD calculations, we have established a first-principles opacity table (FPOT) for CH in a wide range of densities and temperatures [p = 0.1 to 100 g/cm 3 and T = 2000 to 1,000,000 K]. The FPOT gives much higher Rosseland mean opacity compared to the cold-opacity–patched astrophysics opacity table for warm, dense CH and favorably compares to the newly improved Los Alamos ATOMIC model for moderately compressed CH (pCH ≤10 g/cm 3 ) but remains a factor of 2 to 3 higher at extremely high densities (pCH ≥ 50 g/cm 3 ). We anticipate the established FPOT of CH will find important applications to reliable designs of high-energy-density experiments. Moreover, the understanding of K-edge shifting revealed in this study could provide guides for improving the traditional opacity models to properly handle the strongly coupled and degenerate conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Testing deviations from GR at cosmological scales including dynamical dark energy, massive neutrinos, functional or binned parametrizations, and spatial curvature

Here we introduce a new version of the Integrated Software in Testing General Relativity (ISiTGR) which is a patch to the software CAMB and CosmoMC . ISiTGR is intended to test deviations from GR at cosmological scales using cosmological datasets. While doing so, it allows for various extensions to the standard flat Λ cold dark matter model. In this new release, we have support for the following: (1) dynamical dark energy parametrizations with a constant or time-dependant equation of state; (2) a consistent implementation of anisotropic shear to model massive neutrinos throughout the full formalism; (3) multiple commonly used parametrizations of modified growth (MG) parameters; (4) functional, binned and hybrid time and scale dependencies for all MG parameters; (5) spatially flat or curved backgrounds. ISiTGR is designed to allow cosmological analyses to take full advantage of ongoing and future surveys to test simultaneously or separately various extensions to the standard model. We describe here the formalism and its implementation in the cosmic microwave background (CMB) code, the Integrated Sachs-Wolfe effect, and the 3 × 2 point statistics. Next, we apply ISiTGR to current datasets from Planck-2018, Planck-2015, Dark Energy Survey YR1 release, baryonic acoustic oscillations (BAO), redshift space distortions (BAO/RSD) from the BOSS Data Release 12, the 6DF Galaxy Survey and the SDSS Data Release 7 Main Galaxy Sample, and Supernova from the Pantheon compilation, joint SNLS/SDSS data analysis and the Hubble Space Telescope. We derive constraints on MG parameters for various combinations of the five features above and find that general relativity is consistent with current datasets in all cases.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Exploring the growth index γ L : Insights from different CMB dataset combinations and approaches

In this study we investigate the growth index γ L , which characterizes the growth of linear matter perturbations, while analysing different cosmological datasets. We compare the approaches implemented by two different patches of the cosmological solver : and __. In our analysis we uncover a deviation of the growth index from its expected Λ CDM value of 0.55 when utilizing the Planck dataset, both in the case and in the __ case, but in opposite directions. This deviation is accompanied by a change in the direction of correlations with derived cosmological parameters. However, the incorporation of cosmic microwave background lensing data helps reconcile γ L with its Λ -cold dark matter value in both cases. Conversely, the alternative ground-based telescopes Atacama Cosmology Telescope and South Pole Telescope consistently yield growth index values in agreement with γ L = 0.55 . We conclude that the presence of the A lens problem in the Planck dataset contributes to the observed deviations, underscoring the importance of additional datasets in resolving these discrepancies. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2025

Warm and fuzzy dark matter: Free streaming of wave dark matter

Wave or fuzzy dark matter that is produced with relativistic wave numbers exhibits free-streaming effects analogous to warm or hot particle dark matter with relativistic momenta. Axions produced after inflation provide such a warm or mildly relativistic candidate, where the enhanced suppression and observational bounds are only moderately stronger than that from wave propagation of initially cold axions. More generally, the free-streaming damping also impacts isocurvature fluctuations from generation in causally disconnected patches. As coherent spatial fluctuations free stream away they leave incoherent and transient superpositions in their wakes. These multiple wave momentum streams are the wave analog of particle phase space fluctuations or directional collisionless damping of massive neutrinos or hot dark matter. The observable impact on both adiabatic and isocurvature fluctuations of fuzzy dark matter can differ from their cold dark matter counterparts due to free streaming depending on how warm or hot is their momentum distribution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

BICEP/ Keck XVIII: Measurement of BICEP3 polarization angles and consequences for constraining cosmic birefringence and inflation

We use a custom-made calibrator to measure individual detectors’ polarization angles of BICEP3, a small aperture telescope observing the cosmic microwave background (CMB) at 95 GHz from the South Pole. We describe our calibration strategy and the statistical and systematic uncertainties associated with the measurement. We reach an unprecedented precision for such measurement on a CMB experiment, with a repeatability for each detector pair of 0.02°. Here, we show that the relative angles measured using this method are in excellent agreement with those extracted from CMB data. Because the absolute measurement is currently limited by a systematic uncertainty, we do not derive cosmic birefringence constraints from BICEP3 data in this work. Rather, we forecast the sensitivity of BICEP3 sky maps for such analysis. We investigate the relative contributions of instrument noise, lensing, and dust, as well as astrophysical and instrumental systematics. We also explore the constraining power of different angle estimators, depending on analysis choices. We establish that the BICEP3 2-year dataset (2017–2018) has an on-sky sensitivity to the cosmic birefringence angle of 𝜎 𝛼 = 0.07⁢8°, which could be improved to 𝜎 𝛼 = 0.05⁢5° by adding all of the existing BICEP3 data (through 2023). Furthermore, we emphasize the possibility of using the BICEP3 sky patch as a polarization calibration source for CMB experiments, which with the present data could reach a precision of 0.035°. Finally, in the context of inflation searches, we investigate the impact of detector-to-detector variations in polarization angles as they may bias the tensor-to-scalar ratio 𝑟. We show that while the effect is expected to remain subdominant to other sources of systematic uncertainty, it can be reliably calibrated using polarization angle measurements such as the ones we present in this paper.

Cosmic microwave background↗