Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modal model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Reduced order component models for flexible multibody dynamics simulations

Many flexible multibody dynamics simulation codes require some form of component description that properly characterizes the dynamic behavior of the system. A model reduction procedure for producing low order component models for flexible multibody simulation is described. Referred to as projection and assembly, the method is a Rayleigh-Ritz approach that uses partitions of the system modal matrix as component Ritz transformation matrices. It is shown that the projection and assembly method yields a reduced system model that preserves a specified set of the full order system modes. Unlike classical component mode synthesis methods, the exactness of the method described is obtained at the expense of having to compute the full order system modes. The paper provides a comprehensive description of the method, a proof of exactness, and numerical results demonstrating the method's effectiveness.

Tsuha, Walter S.↗
DOE OSTI2021

Sandia NRT Blade-0 Laboratory Modal Survey

Modal testing was performed on the Sandia NRT Blade-0 in building A-60 at NREL/NWTC. Modal testing was intended to identify the fundamental frequencies of the blade. The blade was cantilevered to the A-60 test stand. Fundamental frequencies were identified using impact modal testing. Additional tests included free-decay testing to quantify damping at small displacements. Small-displacement modal testing aims to minimize the influence of aerodynamic damping; roaming accelerometer impact testing with the development of a dynamic frame model enabled visualization of mode shapes.

17 WIND ENERGY↗
NASA NTRS1994

Eigensystem realization algorithm user's guide forVAX/VMS computers: Version 931216

The eigensystem realization algorithm (ERA) is a multiple-input, multiple-output, time domain technique for structural modal identification and minimum-order system realization. Modal identification is the process of calculating structural eigenvalues and eigenvectors (natural vibration frequencies, damping, mode shapes, and modal masses) from experimental data. System realization is the process of constructing state-space dynamic models for modern control design. This user's guide documents VAX/VMS-based FORTRAN software developed by the author since 1984 in conjunction with many applications. It consists of a main ERA program and 66 pre- and post-processors. The software provides complete modal identification capabilities and most system realization capabilities.

Pappa, Richard S.↗
NASA NTRS1985

Dynamics and control of orbiting grid and the synchronously deployable beam

The dynamic analysis of a grid structure hung from the ceiling by two steel wires is described. The method of approach uses the discrete mass model system. The concept of the bifilar pendulum is used in writing the equation of motion. Assumptions are made with regard to the bar stiffnesses in the vertical and horizontal planes. The discrete mases are assumed to be connected by inextensible massless strings that do not provide any torsion or bending. The modal frequencies obtained by this method are compared with those obtained from the finite element model.

Abu-Saba, E. G.↗
DOE OSTI2023

Understanding and Improving Energy Efficiency of Regional Mobility Systems Leveraging System-Level Data

Increased congestion required urban Americans to travel 6.8 billion hours more and purchase 3.1 billion gallons of fuel for a congestion cost of $\$$153 billion, according to the 2019 Urban Mobility Report. How to effectively manage the regional mobility system and improve the energy efficiency presents a big challenge to public agencies. Recent years have witnessed massive multi-jurisdictional multi-modal system-level data from various sources, which provides an unprecedented opportunity to improve the mobility system and its energy efficiency. However, implications of system-level data for mobility and energy efficiency are unclear. Those system-level data sets are siloed, spatially and temporally sparse, biased, not unified, and lacking of insights for system management. Consequently, there is a real need to acquire, fuse, mine and learn from multi-source system-level data to prepare public agencies to deal more effectively with large-scale energy efficiency modeling, management and planning. This project proposes to intensively review inexpensive, replicable and openly-accessible data from multi-modal systems, develop a data-driven system-level modeling framework enabled and validated by data, identify the energy inefficiencies of mobility systems from infrastructure, vehicles, passenger systems, and quantify the benefits of system-level strategies to improve mobility/energy efficiency. In addition, this research develops models to effectively estimate energy consumption and emissions from various types of vehicles on the roadway networks, with high granularity and high fidelity. Traditional models often heavily rely on aggregated infrastructure or vehicle/passenger data, for example, the census survey, land-use, and traffic counts of one or several classes, which may lead to research gaps considering the emerging vehicle technologies. Those models do not contain individual vehicular information. We propose an integrated data-driven method that combines multiple network modeling components, featuring the utilization of state-wide vehicle registration data. The additional vehicle registration data improve the model performance, and produce high-resolution vehicle-specific estimates of emissions and network performance metrics. Two case studies on the Pittsburgh and Philadelphia regional network show that the proposed method can efficiently and effectively estimate the emissions of a large-scale network, and provide valuable information for evaluating common management strategies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2001

Modeling of Fillets in Thin-Walled Structures for Dynamic Analysis

Relatively new developments in manufacturing methods have made it possible to produce machined parts with a wall thickness of less than 0.010". While the parts are being machined. Fillets of relatively large radius to thickness ratios are created by the milling tool. This paper discusses an accurate new technique for finite-element modeling of fillets for dynamic and stiffness analysis using efficient plate elements rather than more computationally intensive, high density solid meshes, A simple filleted cantilever beam of 0.040" thickness, 1.6" length, 1" depth, and 0.250" radius in the corner was modeled using both solid elements and several different plate element geometries. The finite element results were then compared with static and modal testing of a machined sample. The highest-scoring plate element technique uses a bridge of elements that is constructed through the tangent point of the Fillet radius such that the thickness of the element matches tile volume of the fillet. This model produces errors of less than 4.6 percent for static loading and less than 7.4 percent for modal analysis. This simple plate element technique will prove critical for efficient, timely, and accurate dynamic analysis of complex thin-walled structures.

Seugling, Richard M.↗
NASA NTRS2020

Application of Quasi-Static Modal Analysis to an Orion Multi-Purpose Crew Vehicle Test

Bolted structural joints often exhibit load-dependent stiffness and energy dissipation that leads to nonlinear, amplitude dependent frequency and damping in the structure. As an alternative to direct integration of the nonlinear equations of motion, quasi-static modal analysis (QSMA) determines the dependence of frequency and damping on response amplitude using loading behavior from nonlinear static analyses. QSMA has previously been demonstrated to substantially reduce computational cost and maintain accuracy relative to full nonlinear dynamic simulation. This work explores the applicability of QSMA to a complex, large-scale aerospace structure. QSMA is employed to analyze a nonlinear model of test hardware developed to support the Orion Multi-Purpose Crew Vehicle program, which exhibited nonlinear behavior during dynamic testing at flight-like load levels. In addition to the extraction of amplitude-dependent frequency and damping curves, a Bouc-Wen hysteresis model was used in conjunction with the quasi-static results to develop nonlinear, uncoupled, time-domain modal equations of motion for the structure. Excellent agreement was observed between the reduced and full-order nonlinear models, encouraging future employment of QSMA to support accurate and efficient model reduction of structures with bolted joint nonlinearities.

QSMA↗
NASA NTRS1990

Multibody model reduction by component mode synthesis and component cost analysis

The classical assumed-modes method is widely used in modeling the dynamics of flexible multibody systems. According to the method, the elastic deformation of each component in the system is expanded in a series of spatial and temporal functions known as modes and modal coordinates, respectively. This paper focuses on the selection of component modes used in the assumed-modes expansion. A two-stage component modal reduction method is proposed combining Component Mode Synthesis (CMS) with Component Cost Analysis (CCA). First, each component model is truncated such that the contribution of the high frequency subsystem to the static response is preserved. Second, a new CMS procedure is employed to assemble the system model and CCA is used to further truncate component modes in accordance with their contribution to a quadratic cost function of the system output. The proposed method is demonstrated with a simple example of a flexible two-body system.

Spanos, J. T.↗
NASA NTRS2021

Computational Inference of Vibratory System with Incomplete Modal Information Using Parallel, Interactive and Adaptive Markov Chains

Inverse analysis of vibratory system is an important subject in fault identification, model updating, and robust design and control. It is challenging subject because 1) the problem is oftentimes underdetermined while the measurements are limited and/or incomplete; 2) many combinations of parameters may yield results that are similar with respect to actual response measurements; and 3) uncertainties inevitably exist. The aim of this research is to leverage upon computational intelligence through statistical inference to facilitate an enhanced, probabilistic framework using incomplete modal response measurement. This new framework is built upon efficient inverse identification through optimization, whereas Bayesian inference is employed to account for the effect of uncertainties. To overcome the computational cost barrier, we adopt Markov chain Monte Carlo (MCMC) to characterize the target function/distribution. Instead of using single Markov chain in conventional Bayesian approach, we develop a new sampling theory with multiple parallel, interactive and adaptive Markov chains and incorporate it into Bayesian inference. This can harness the collective power of these Markov chains to realize the concurrent search of multiple local optima. The number of required Markov chains and their respective initial model parameters are automatically determined via Monte Carlo simulation-based sample pre-screening followed by K-means clustering analysis. These enhancements can effectively address the aforementioned challenges in finite element inverse analysis. The validity of this framework is systematically demonstrated through case studies.

K Zhou↗
NASA NTRS1986

Modified LTR robust control for flexible structures

A procedure is developed for dealing with performance and robustness issues in the design of multi-input multi-output compensators for lightly damped flexible structures. The procedure is based upon representing errors in the plant design model as structured uncertainties, and applying a modified version of the Loop Transfer Recovery (LTR) design method. Real parameter errors, such as frequency errors, damping errors or modal displacement errors can be treated. The approach involves adjusting the cost function in the regulator problem and the process noise model in the estimator problem in a particular manner which reflects the assumed structure of the modeling errors. Numerical examples dealing with the control of a large flexible space antenna with uncertain frequencies demonstrate a considerable improvement over standard LTR methods. Convenient design parameters can be varied until a satisfactory compromise is achieved between performance and robustness.

Blelloch, P. A.↗
NASA NTRS1998

On-Line Robust Modal Stability Prediction using Wavelet Processing

Wavelet analysis for filtering and system identification has been used to improve the estimation of aeroservoelastic stability margins. The conservatism of the robust stability margins is reduced with parametric and nonparametric time- frequency analysis of flight data in the model validation process. Nonparametric wavelet processing of data is used to reduce the effects of external disturbances and unmodeled dynamics. Parametric estimates of modal stability are also extracted using the wavelet transform. Computation of robust stability margins for stability boundary prediction depends on uncertainty descriptions derived from the data for model validation. The F-18 High Alpha Research Vehicle aeroservoelastic flight test data demonstrates improved robust stability prediction by extension of the stability boundary beyond the flight regime. Guidelines and computation times are presented to show the efficiency and practical aspects of these procedures for on-line implementation. Feasibility of the method is shown for processing flight data from time- varying nonstationary test points.

Brenner, Martin J.↗
NASA NTRS1981

A pocket model for aluminum agglomeration in composite propellants

This paper presents a model for the purpose of estimating the fraction of aluminum powder that will form agglomerates at the surface of deflagrating composite propellants. The basic idea is that the fraction agglomerated depends upon the amount of aluminum that melts within effective binder pocket volumes framed by oxidizer particles. The effective pocket depends upon the ability of ammonium perchlorate modals to encapsulate the aluminum and provide a local temperature sufficient to ignite the aluminum. Model results are discussed in the light of data showing effects of propellant formulation variables and pressure.

Cohen, N. S.↗
NASA NTRS1989

Approximate minimum-time trajectories for 2-link flexible manipulators

Powell's nonlinear programming code, VF02AD, was used to generate approximate minimum-time tip trajectories for 2-link semi-rigid and flexible manipulator movements in the horizontal plane. The manipulator is modeled with an efficient finite-element scheme for an n-link, m-joint system with horizontal-plane bending only. Constraints on the trajectory include boundary conditions on position and energy for a rest-to-rest maneuver, straight-line tracking between boundary positions, and motor torque limits. Trajectory comparisons utilize a change in the link stiffness, EI, to transition from the semi-rigid to flexible case. Results show the level of compliance necessary to excite significant modal behavior. Quiescence of the final configuration is examined with the finite-element model.

Eisler, G. R.↗
DOE OSTI2022

Understanding the Stability of Manganese Chromium Antimonate Electrocatalysts through Multimodal In Situ and Operando Measurements

Herein, we utilize an on-line electrochemical flow cell coupled with an inductively coupled plasma-mass spectrometer (ICP-MS) to characterize the impact of composition and reactant gas on the multielement dissolution of Mn(-Cr)-Sb-O electrocatalysts. Compared to Mn 2 O 3 and Cr 2 O 3 oxides, we find that the antimonate framework stabilizes Mn at OER potentials and Cr at both ORR and OER potentials. Furthermore, dissolution of Mn and Cr from Mn(-Cr)-Sb-O is found to be driven by ORR reaction rate, with minimal dissolution under N 2 . We observe preferential dissolution of Cr totaling 13% over 10 minutes at 0.3, 0.6, and 0.9 V vs RHE, with only 1.5% loss of Mn, indicating an enrichment of Mn at the surface of the particles. Despite this asymmetric dissolution, in situ X-ray absorption spectroscopy (XAS) showed no measurable changes in the Mn K-edge at comparable potentials. This lack of change could suggest that modification to the Mn oxidation state in the surface layer is too small or that layer is too thin to be measured with the bulk XAS measurement. Lastly, on-line ICP-MS was used to assess the effects of applied potential, scan rate, and current of Mn-Cr-Sb-O during cyclic voltammetry and accelerated stress tests. With this deeper understanding of the interplay between oxygen reduction and dissolution, testing procedures were identified to maximize both activity and stability. This work highlights the use of multi-modal in situ characterization techniques in tandem to build a more complete model of stability and develop protocols for optimizing catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Selective permeation up a chemical potential gradient to enable an unusual solvent purification modality

The need for energy-efficient recovery of organic solutes from aqueous streams is becoming more urgent as chemical manufacturing transitions toward nonconventional and bio-based feedstocks and processes. In addition to this, many aqueous waste streams contain recalcitrant organic contaminants, such as pharmaceuticals, industrial solvents, and personal care products, that must be removed prior to reuse. We observe that rigid carbon membrane materials can remove and concentrate organic contaminants via an unusual liquid-phase membrane permeation modality. Surprisingly, detailed thermodynamic calculations on the chemical potential of the organic contaminant reveal that the organic species has a higher chemical potential on the permeate side of the membrane than on the feed side of the membrane. This unusual observation challenges conventional membrane transport theory that posits that all permeating species move from high chemical potential states to lower chemical potential states. Based on experimental measurements, we hypothesize that the organic is concentrated in the membrane relative to water via favorable binding interactions between the organic and the carbon membrane. The concentrated organic is then swept through the membrane via the bulk flow of water in a modality known as “sorp-vection.” We highlight via simplified nonequilibrium thermodynamic models that this “uphill” chemical potential permeation of the organic does not result in second-law violations and can be deduced via measurements of the organic and water sorption and diffusion rates into the carbon membrane. Moreover, this work identifies the need to consider such nonidealities when incorporating unique, rigid materials for the separations of aqueous waste streams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Computational and Systems Biology Advances to Enable Bioagent Agnostic Signatures

Enumerated threat agent lists have long driven biodefense priorities. The global SARS-CoV-2 pandemic demonstrated the limitations of searching for known threat agents as compared to a more agnostic approach. Recent technological advances are enabling agent-agnostic biodefense, especially through the integration of multi-modal observations of host-pathogen interactions directed by a human immunological model. Although well-developed technical assays exist for many aspects of human-pathogen interaction, the analytic methods and pipelines to combine and holistically interpret the results of such assays are immature and require further investments to exploit new technologies. In this manuscript, we discuss potential immunologically based bioagent-agnostic approaches and the computational tool gaps the community should prioritize filling.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Estimation of Participation Factors Using the Synchrosqueezed Wavelet Transform

This paper proposes a data-driven approach for estimating participation factors for a power system using only simulation results on selected disturbances. The approach is purely response-based and does not need a linearized system model for eigen-analysis, which makes it applicable to systems whose detailed, complete mathematical models are not available. Considering the unavoidable nonlinearity as exhibited in the transient period of a system response, the Synchrosqueezed Wavelet Transform is applied to simulated responses for modal analysis to obtain participation factors. Based on simulations of Kundur's two-area system using both the electromagnetic transient model and phasor model, the participation factors estimated by the proposed approach are compared with two other signal processing tools, the Prony analysis and continuous wavelet transform, and are also benchmarked with conventional model-based participation factors.

participation factor↗
DOE OSTI2021

An Intelligent Garbage Sorting System Based on Edge Computing and Visual Understanding of Social Internet of Vehicles

In order to enable Social Internet of Vehicles devices to achieve the purpose of intelligent and autonomous garbage classification in a public environment, while avoiding network congestion caused by a large amount of data accessing the cloud at the same time, it is therefore considered to combine mobile edge computing with Social Internet of Vehicles to give full play to mobile edge computing features of high bandwidth and low latency. At the same time, based on cutting-edge technologies such as deep learning, knowledge graph, and 5G transmission, the paper builds an intelligent garbage sorting system based on edge computing and visual understanding of Social Internet of Vehicles. First of all, for the massive multisource heterogeneous Social Internet of Vehicles big data in the public environment, different item modal data adopts different processing methods, aiming to obtain a visual understanding model. Secondly, using the 5G network, the model is deployed on the edge device and the cloud for cloud-side collaborative management, aiming to avoid the waste of edge node resources, while ensuring the data privacy of the edge node. Finally, the Social Internet of Vehicles devices is used to make intelligent decision-making on the big data of the items. First, the items are judged as garbage, and then the category is judged, and finally the task of grabbing and sorting is realized. The experimental results show that the system proposed in this paper can efficiently process the big data of Social Internet of Vehicles and make valuable intelligent decisions. At the same time, it also has a certain role in promoting the promotion of Social Internet of Vehicles devices.

Shen, Xuehao↗