Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “metal nanoparticles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Unexpected “Spontaneous” Evolution of Catalytic, MOF-Supported Single Cu(II) Cations to Catalytic, MOF-Supported Cu(0) Nanoparticles

A desirable feature of metal–organic frameworks (MOFs) is their well-defined structural periodicity and the presence of well-defined catalyst grafting sites (e.g., reactive –OH and –OH 2 groups) that can support single-site heterogeneous catalysts. However, one should not overlook the potential role of residual organic moieties, specifically formate ions that can occupy the catalyst anchoring sites during MOF synthesis. Here we show how these residual formate species in a Zr-based MOF, NU-1000, critically alter the structure, redox capability, and catalytic activity of postsynthetically incorporated Cu(II) ions. Single-crystal X-ray diffraction measurements established that there are two structurally distinct types of Cu(II) ions in NU-1000: one type with residual formate and one without. In NU-1000 with formate, Cu(II) solely binds to the node via the formate-unoccupied, bridging μ 3 –OH, whereas in the formate-free case, it displaces protons from two node hydroxo ligands and resides close to the terminal –OH 2 . Under an inert atmosphere, node-bound formate facilitates the unanticipated reduction of isolated Cu(II) to nanoparticulate Cu(0)—a behavior which is essentially absent in the formate-free analogue because no other sacrificial reductant is present. When the two MOFs were tested as benzyl alcohol oxidation catalysts, we observed that residual formate boosts the catalytic turnover frequency. Density functional calculations showed that node-bound formate acts as a sacrificial two-electron donor and assists in reducing Cu(II) to Cu(0) by a nonradical pathway. The negative Gibbs free energy of reaction (ΔG) and enthalpy of reaction (ΔH) indicate that the reduction is thermodynamically favorable. Here, the work presented here highlights how the often-neglected residual formate prevalent in nearly all zirconium-based MOFs can significantly modulate the properties of supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Single Iridium Atom Doped Ni 2 P Catalyst for Optimal Oxygen Evolution

Single-atom catalysts (SACs) with 100% active sites have excellent prospects for application in the oxygen evolution reaction (OER). However, further enhancement of the catalytic activity for OER is quite challenging, particularly for the development of stable SACs with overpotentials <180 mV. Here, we report an iridium single atom on Ni 2 P catalyst (Ir SA -Ni 2 P) with a record low overpotential of 149 mV at a current density of 10 mA·cm –2 in 1.0 M KOH. The Ir SA -Ni 2 P catalyst delivers a current density up to ∼28-fold higher than that of the widely used IrO 2 at 1.53 V vs RHE. Both the experimental results and computational simulations indicate that Ir single atoms preferentially occupy Ni sites on the top surface. The reconstructed Ir–O–P/Ni–O–P bonding environment plays a vital role for optimal adsorption and desorption of the OER intermediate species, which leads to marked enhancement of the OER activity. Additionally, the dynamic “top-down” evolution of the specific structure of the Ni@Ir particles is responsible for the robust single-atom structure and, thus, the stability property. In conclusion, this Ir SA -Ni 2 P catalyst offers novel prospects for simplifying decoration strategies and further enhancing OER performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Fe–N–C Boosts the Stability of Supported Platinum Nanoparticles for Fuel Cells

The poor durability of Pt-based nanoparticles dispersed on carbon black is the challenge for the application of long-life polymer electrolyte fuel cells. Recent work suggests that Fe- and N-codoped carbon (Fe-N-C) might be a better support than conventional high-surface-area carbon. In this work, we find that the electrochemical surface area retention of Pt/Fe-N-C is much better than that of commercial Pt/C during potential cycling in both acidic and basic media. In situ inductively coupled plasma mass spectrometry studies indicate that the Pt dissolution rate of Pt/Fe-N-C is 3 times smaller than that of Pt/C during cycling. Density functional theory calculations further illustrate that the Fe-N-C substrate can provide strong and stable support to the Pt nanoparticles and alleviate the oxide formation by adjusting the electronic structure. The strong metal-substrate interaction, together with a lower metal dissolution rate and highly stable support, may be the reason for the significantly enhanced stability of Pt/Fe-N-C. In conclusion, this finding highlights the importance of carbon support selection to achieve a more durable Pt-based electrocatalyst for fuel cells.

25 ENERGY STORAGE↗
DOE OSTI2020

Electrochemically scrambled nanocrystals are catalytically active for CO 2 -to-multicarbons

Significance The electrocatalytic conversion of CO 2 to value-added products, especially valuable multicarbon products, is a pathway toward sustainable formation of chemicals and fuels typically derived from fossil fuels, while mitigating CO 2 emissions. Fundamental understanding and development of more efficient catalysts for this reaction require deep investigation into structures with high intrinsic activity, which are limited at present. This work comprehensively investigates a dynamic copper nanoparticle ensemble catalyst that significantly improves intrinsic activity of copper for multicarbon formation. Through concerted ex situ and in situ characterization techniques, it illustrates an electrochemically induced fusion of copper nanoparticles that result in a catalytically active disordered structure, motivating closer study of disordered metal nanostructures for C–C coupling electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Report on use of Inoculants in Missile Application Alloys

This report documents the status of current inoculant research relevant to missile application alloys and MTCR control language. The information is intended to provide data on current inoculants for us determining the current state of development and identifying potential research directions. Although there has been significant scientific research into the development and synthesis of inoculants, their current availability is limited is traditional powder inoculants employed during casting processes. However, research continues the development of complex oxides, ribbon materials, high entropy alloys, and other inoculant product forms, including the use of inoculants in the melt pools produced during additive manufacturing. Research to date has focused primarily on aluminum and steel alloys with emphasis on refining grain structures and evolving equiaxed morphologies while increasing strength and castability. The primary inoculants in steel and cast irons include TiN, SiC, FeSi75, and Ce which have increased strength properties. Chief inoculants for Al alloys often include TiC, SiC, Al3Sc(x) and TiB2 to aid in precipitation and refinement. Ti and Ni alloys have fewer research activities involving inoculants, although TiN, TiB, ZrN and LaB6 (for Ti alloys) and WC, Co3FeNb2, and CrFeNb (for Ni alloys) have been used. Sic, Al2O3, Mg and Ti are key inoculants for Mg alloys. Multiple cast alloys from each of the material classes demonstrated increased strength and performance properties using inoculants, with several approaching requirements applicable to missile service environments. The continued evolution of advanced manufacturing capabilities is making it easier to produce high temperature near net shape structural materials using inoculant powders. These shapes may include the geometric shapes addressed within the MTCR (tubes and limited wall thicknesses). The use of inoculants may enable further development of high temperature alloys into near net shapes traditionally produced via casting processes due to limited ductility. This may decrease material and manufacturing costs. In addition, inoculation provides controlled kinetics and achievable chemical segregation that enables potential for far-from equilibrium thermodynamic microstructures and chemistries that could provide new metastable alloy states and subsequent properties to address co-design engineering constraints, including needs for increased strength and ductility. It is recommended that specific material combinations within these alloy classes be carefully watched as the materials evolve, with controls aimed at those having material properties above current MTCR levels. This specifically includes the use of refractory inoculants in alloys, and the application of inoculants in high strength and high temperature alloys via additive manufacturing processes, with care to link capabilities to product forms similar to the current requirements on tube geometries and material feed stocks. The continued development of nanoparticle inoculants will increase strength and ductility of high strength castings and additive manufactured metallic components. For example, adding inoculants into the casting of maraging steels and other precipitation strengthened alloys may drastically elevate mechanical properties above the control limit of current regulations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

CeO2 Nanoparticle Doping as a Probe of Active Site Speciation in the Catalytic Hydrolysis of Organophosphates

Organophosphate hydrolysis is important for degrading environmentally harmful compounds and recovering phosphate ions in biological molecules. CeO2 nanocrystals have been well-studied for dephosphorylation via hydrolysis owing to the accessible and tunable distribution of Ce3+ and Ce4+ ions. However, there remains uncertainty in the literature regarding which surface defect properties direct catalytic activity, such as the Ce3+/Ce4+ distribution, oxygen vacancies, faceting, and dopants, and to what degree they contribute to efficient hydrolysis. Trivalent (M3+) dopants serve as a tool for manipulating defects, including the concentration of Ce3+ and oxygen vacancies, thereby influencing the hydrolytic activity of CeO2. Herein, trivalent metal ions (M = Y3+, Cr3+, In3+, and Gd3+) were employed to modulate the active sites on the CeO2 nanocrystal surface, and the effects of each metal dopant on the cerium oxide active sites for organophosphate hydrolysis were investigated. M-doped CeO2 nanoparticles were synthesized via hydrothermal methods, followed by annealing to remove ligands and prime the nanocrystal surface for catalysis. Catalytic performance was evaluated using dimethyl-p¬-nitrophenyl phosphate (DMNP) as a model organophosphate substrate, with degradation monitored over time using UV-visible absorption spectroscopy. Powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy revealed successful doping of CeO2 in all cases, albeit with distinctive characteristics demonstrating how M3+ dopants affect catalysis. We show that CeO2 exhibits high sensitivity to dopants that generate lattice strain, Ce3+ ions, and oxygen vacancy defects. Consequently, achieving high catalytic efficiency within CeO2 requires a balanced active site ensemble, wherein defects are maintained at optimal concentrations and distributions on the nanocrystal surface.

Miura-Stempel, Emily L.↗
DOE OSTI2021

Localized Orbital Excitation Drives Bond Formation in Plasmonic Catalysis

Localized surface plasmons generated on metallic nanostructures can be used to accelerate molecular transformations; however, the efficiency is limited by the challenge to control the energy/charge transfer at the interfaces. Here, we combine density functional theory (DFT) calculations and experiments to reveal the mechanism of nitrophenol reduction on Au nanoparticles under visible-light irradiation and propose a strategy to further enhance the reaction rates. DFT calculations show a reduced activation barrier under electronic excitation on Au(111), thus explaining the measured higher rates under visible-light irradiation. Furthermore, we propose a heterostructure with Au nanoparticles covered by a thin film of hexagonal boron nitride; the latter is used to decouple the molecular orbitals from the metal to enable charge localization in the molecule. DFT calculations show that, by this electronic decoupling, the activation barrier can be lowered by a factor of five. Furthermore, this work thus provides a valuable strategy for optimizing catalytic efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Biomimetic Control over Bimetallic Nanoparticle Structure and Activity via Peptide Capping Ligand Sequence

Here, the controlled design of bimetallic nanoparticles (BNPs) is a key goal in tailoring their catalytic properties. Recently, biomimetic pathways demonstrated potent control over the distribution of different metals within BNPs, but a direct understanding of the peptide effect on the compositional distribution at the interparticle and intraparticle levels remains lacking. We synthesized two sets of PtAu systems with two peptides and correlated their structure, composition, and distributions with the catalytic activity. Structural and compositional analyses were performed by a combined machine learning-assisted refinement of X-ray absorption spectra and Z-contrast measurements by scanning transmission electron microscopy. The difference in the catalytic activities between nanoparticles synthesized with different peptides was attributed to the details of interparticle distribution of Pt and Au across these markedly heterogeneous systems, comprising Pt-rich, Au-rich, and Au core/Pt shell nanoparticles. The total amount of Pt in the shells of the BNPs was proposed to be the key catalytic activity descriptor. This approach can be extended to other systems of metals and peptides to facilitate the targeted design of catalysts with the desired activity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural Templation of MOF-Derived Zirconia Nanoparticles

Templated synthesis is an important avenue for the development and synthesis of porous materials, as it provides a high level of control over the resulting structure. However, this control is difficult to achieve at the atomic level for poorly crystalline or noncrystalline materials, such as metal–organic framework (MOF)-derived carbons. We report the carbonization of three zirconium-based MOFs with different framework and inorganic building unit structures to form zirconia nanoparticles in a carbon matrix. Using a combination of X-ray diffraction, X-ray total scattering, and transmission electron microscopy, we found that the extended Zr-oxo chains of MIL-140C-bpy facilitate the formation of larger and more ordered zirconia nanoparticles. In contrast, the discrete Zr 6 -oxo clusters of UiO-67-bpy and Zr-ABTC result in smaller and differently structured nanoparticles.

metal-organic framework↗
DOE OSTI2024

Enhancing Stability of Surface Au under Oxidizing Conditions through Reduced Bulk Au Content

Contrary to the common assumption that a higher bulk content of precious metals facilitates the preservation of more surface noble metal by serving as a reservoir for surface enrichment, we demonstrate that a lower bulk content of Au results in a more stable arrangement of Au atoms at the surface of Cu–Au nanoparticles when exposed to an O 2 atmosphere. Using ambient pressure X-ray photoelectron spectroscopy, we investigate the surface segregation and oxidation behavior of Cu–Au nanoparticles across various compositions. Here, our results reveal that in Au-rich nanoparticles exposed to an H 2 atmosphere, surface segregation prompts the formation of a continuous Au-enriched shell, which subsequently oxidizes into a complete CuO x shell upon transitioning to an O 2 atmosphere. Conversely, in Au-poor nanoparticles during H 2 treatment, segregation results in the emergence of Au clusters embedded within the surface layer, persisting upon exposure to O 2 . This unexpected phenomenon shows that reducing the bulk content of precious metals can enhance the surface stability of noble atoms under oxidizing conditions, as further demonstrated by comparing the catalytic performance of Cu–Au nanoparticles with varying Au bulk contents in CO oxidation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ultrasmall Cu Nanoparticles Supported on Crystalline, Mesoporous ZnO for Selective CO 2 Hydrogenation

Converting CO 2 to value-added chemicals, e. g., CH 3 OH, is highly desirable in terms of the carbon cycling while reducing CO 2 emission from fossil fuel combustion. Cu-based nanocatalysts are among the most efficient for selective CO 2 -to-CH 3 OH transformation; this conversion, however, suffers from low reactivity especially in the thermodynamically favored low temperature range. We herein report ultrasmall copper (Cu) nanocatalysts supported on crystalline, mesoporous zinc oxide nanoplate (Cu@mZnO) with notable activity and selectivity of CO 2 -to-CH 3 OH in the low temperature range of 200–250 °C. Cu@mZnO nanoplates are prepared based on the crystal-crystal transition of mixed Cu and Zn basic carbonates to mesoporous metal oxides and subsequent hydrogen reduction. Under the nanoconfinement of mesopores in crystalline ZnO frameworks, ultrasmall Cu nanoparticles with an average diameter of 2.5 nm are produced. Cu@mZnO catalysts have a peak CH 3 OH formation rate of 1.13 mol h −1 per 1 kg under ambient pressure at 246 °C, about 25 °C lower as compared to that of the benchmark catalyst of Cu−Zn−Al oxides. In conclusion, our new synthetic strategy sheds some valuable insights into the design of porous catalysts for the important conversion of CO 2 -to-CH 3 OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Transition metals of Pt and Pd on the surface of topological insulator Bi2Se3

Transition metal catalysts supported on topological insulators are predicted to show improved catalytic properties due to the presence of topological surface states, which may float up to the catalysts and provide robust electron transfer. However, experimental studies of surface structures and corresponding catalytic properties of transition metal/topological insulator heterostructures have not been demonstrated so far. Here, we report the structures, chemical states, and adsorption behaviors of two conventional transition metal catalysts, Pt and Pd, on the surface of Bi2Se3, a common topological insulator material. We reveal that Pt forms nanoparticles on the Bi2Se3 surface. Moreover, the interaction between Pt and surface Se is observed. Furthermore, thermal dosing of O2 onto the Pt/Bi2Se3 heterostructure leads to no oxygen adsorption. Detailed scanning tunneling microscopy study indicates that Pt transforms into PtSe2 after the thermal process, thus preventing O2 from adsorption. For another transition metal Pd, it exhibits approximate layer-island growth on Bi2Se3, and Pd–Se interaction is also observed. Our work provides significant insights into the behaviors of transition metals on top of a common topological insulator material and will assist in the future design of catalysts built with topological materials.

Chemistry↗
DOE OSTI2023

On the melt pool dynamic of voxel-controlled metal matrix composites via hybrid additive manufacturing: Laser powder bed fusion and ink-jetting

In this study, the effect of the addition of reinforcement nanoparticles to the 316L matrix by adopting ex-situ and in-situ method (drop on demand jetting) to produce 316L/Al 2 O 3 nanocomposite was investigated. In the ex-situ method, the Al 2 O 3 nanoparticles (NPs) were lightly mixed with 316L powder and processed by laser powder bed fusion. In the in-situ method, an ethanol-based ink containing Al 13 nanoclusters (NCs) was added to 316L powder and then processed by laser. Both ex-situ and in-situ method produced nanocomposites with Al-Si-Mn-O-enriched precipitations within the 316L matrix. The addition of NPs/NCs to the 316L matrix, altered the geometrical characteristic of the single-track melt pools. At the same laser power, with increasing the amount of Al 2 O 3 NPs and Al 13 NCs the melt pool deepened due to reduced thermal conductivity and prolonged liquid presence. Further, as a result, 316L/1 wt% Al 13 NCs deposited single track showed larger grains in comparison to 316L single track. At a high laser power of 150W, the Marangoni flow and the buoyancy force caused the nanoparticles to agglomerate and float to the top surface of tracks; therefore, the wt% fraction of precipitation was drastically reduced due to the loss of Al. The 316L/Al 2 O 3 NPs and 316L/Al 13 NCs exhibited the microhardness of 285 ± 13 HV and 293 ± 7 HV, respectively, higher than the deposited 316L single track, 265 ± 15 HV. Lastly, a hybrid LPBF+ink-jet printer was adopted to selectively change the composition of different zones by adding Al 13 NCs ink to 316L and producing a voxel-controlled metal matrix composite.

316L↗
NASA NTRS2016

Synthesis and Characterization of Cobalt Containing Nanoparticles on Alumina A Potential Catalyst for Gas to Liquid Fuels Production

Fisher-Tröpsch synthesis (FTS) is a century-old gas-to-liquid (GTL) technology that commonly employs cobalt (Co, on an oxide support) or iron (supported or not) species catalysts. It has been well established that the activity of the Co catalyst depends directly upon the number of surface Co atoms. The addition of promoter (mainly noble) metals has been widely utilized to increase the fraction of Co that is available for surface catalysis. Direct synthesis of Co nanoparticles is a possible alternative approach; our preliminary synthesis and characterization efforts are described. Materials were characterized by various transmission microscopies and energy dispersive spectroscopy. Tri-n-octylphosphine oxide (TOPO) and dicobalt octacarbonyl were heated under argon to a temperature of 180 deg with constant stirring for 1 hr. Quenching the reaction in toluene produced Co-containing nanoparticles with a diameter of 5 to 10 nm. Alternatively, an alumina support (SBA-200 Al2O3) was added; the reaction was further stirred and the temperature was decreased to 140 deg to reduce the rate of further growth/ripening of the nucleated Co nanoparticles. A typical size of Co-containing NPs was also found to be in the range of 5 to 10 nm. This can be contrasted with a range of 50 to 200 nm for conventionally-produced Co-Al2O3 Fischer-Tröpsch catalysts. This method shows great potential for production of highly dispersed catalysts that are either supported or unsupported.

aluminum oxides↗
DOE OSTI2024

Low-index mesoscopic surface reconstructions of Au surfaces using Bayesian force fields

Metal surfaces have long been known to reconstruct, significantly influencing their structural and catalytic properties. Many key mechanistic aspects of these subtle transformations remain poorly understood due to limitations of previous simulation approaches. Using active learning of Bayesian machine-learned force fields trained from ab initio calculations, we enable large-scale molecular dynamics simulations to describe the thermodynamics and time evolution of the low-index mesoscopic surface reconstructions of Au (e.g., the Au(111)-‘Herringbone,’ Au(110)-(1 × 2)-‘Missing-Row,’ and Au(100)-‘Quasi-Hexagonal’ reconstructions). This capability yields direct atomistic understanding of the dynamic emergence of these surface states from their initial facets, providing previously inaccessible information such as nucleation kinetics and a complete mechanistic interpretation of reconstruction under the effects of strain and local deviations from the original stoichiometry. We successfully reproduce previous experimental observations of reconstructions on pristine surfaces and provide quantitative predictions of the emergence of spinodal decomposition and localized reconstruction in response to strain at non-ideal stoichiometries. A unified mechanistic explanation is presented of the kinetic and thermodynamic factors driving surface reconstruction. Furthermore, we study surface reconstructions on Au nanoparticles, where characteristic (111) and (100) reconstructions spontaneously appear on a variety of high-symmetry particle morphologies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Heterogeneous 3D Morphological Evolution of Ni Microparticles in Molten Salts: Visualized by Operando Synchrotron X-ray Nano-tomography

Ni-based superalloys are promising materials for high-temperature molten salt (MS) energy generation and storage. Studying morphological and chemical evolution of pure Ni in MS provides fundamental knowledge for MS technologies and corrosion mitigation. Here, in this study, real-time 3D morphological changes of Ni microparticles in molten KCl-MgCl 2 were studied by operando synchrotron X-ray nano-tomography at 700°C. Rapid Ni particle agglomeration occurred, without significant chemical reactions, such as oxide or chloride formation. The morphological growth evolved differently from classical coarsening or sintering behaviors and occurred nonuniformly, with other regions showing slight dissolution of Ni. Ni nanoparticles were found to be dispersed in many areas of the samples, either from microparticle dissolution or other radiation-induced nanoparticle formation mechanisms. This study discusses important factors, i.e., thermal gradient, amounts of salt and metals, and radiation effect, that influence morphological changes of materials in MS, critical for fundamental understanding of material–MS interactions as well as for practical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantum Hamiltonian for the surface charge density on a ring torus and radiative decay of plasmons

Photon scattering and the ensuing excitation of surface plasmons in single rings, single composite rings, and many-ring systems was recently shown to provide dispersion and field distributions [K. V. Garapati et al., J. Phys. Commun. 2, 015031 (2018)] of potential for specific applications in particle and molecular trapping [R. Alaee et al., Appl. Phys. Lett. 109, 141102 (2016); M. Salhi et al., Phys. Rev. A 92, 033416 (2015)], in addition to metamaterials and sensing. Furthermore, following photon or electron interactions with metallic nanorings, both radiative and nonradiative decay channels are important in the consideration of the nanoparticle as a photon or phonon source, and in related applications. In this work, we quantize the electronic normal modes of the ring torus and obtain the radiative decay of plasmons. Due to a geometry-related complexity, we employ a perturbation approach to obtain analytical expressions for the radiative decay channel for a vacuum bounded single solid nanoring. In quantizing the fields, the frequency spectrum of the charge density normal modes of the nanoring is obtained and shown to agree with the exact quasistatic plasmon dispersion relations. Higher-order corrections beyond the presented zero- and first-order calculations may be obtained following the presented results. The results are of potential interest in quantum sensing such as entangling photons and plasmons, or plasmons and trapped molecules.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Nonprecious Single Atom Catalyst for Methane Pyrolysis

The development of a suitable catalytic system for methane pyrolysis reactions requires a detailed investigation of the activation energy of C-H bonds on catalysts, as well as their stability against sintering and coke formation. In this work, both single-metal Ni atoms and small clusters of Ni atoms deposited on titanium nitride (TiN) plasmonic nanoparticles were characterized for the C-H bond activation of a methane pyrolysis reaction using ab initio spin-polarized density functional theory (DFT) calculations. The present work shows the complete reaction pathway, including energy barriers for C-H bond activation and dehydrogenated fragments, during the methane pyrolysis reaction on catalytic systems. Interestingly, the C-H bond activation barriers were low for both Ni single-atom and Ni-clusters, showing the energy barriers of ~1.10 eV and ~0.88 eV, respectively. Additionally, single-atom Ni-TiN showed weaker binding to adsorbates, and a net endothermic reaction pathway indicated that the single-atom Ni-TiN was expected to resist coke formation on its surface. However, these Ni single-atom catalysts can sinter, aggregate into a small cluster, and form a coke layer from the highly exothermic reaction pathway that the cluster takes despite the facile reaction pathway.

08 HYDROGEN↗