Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “management”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

The Low-Level Radioactive Waste Management Office: Thirty Years of Experience in Canada - 13308

This paper reviews thirty years of progress by the Low-Level Radioactive Waste Management Office (LLRWMO) in developing and implementing low-level radioactive waste (LLRW) remediation projects and environmentally safe co-existence strategies. It reports on the present status and the future of the national historic waste program in Canada. There are over two million cubic metres of historic LLRW in Canada. Historic LLRW is broadly defined as LLRW that was managed in the past in a manner that is no longer considered acceptable and for which the original owner cannot reasonably be held accountable. In many cases, the original owner can not be identified or no longer exists. The LLRWMO was established in 1982 as Canada's agent to carry out the responsibilities of the federal government for the management of historic LLRW. The LLRWMO is operated by Atomic Energy of Canada Limited (AECL) through a cost-recovery agreement with Natural Resources Canada (NRCan), the federal department that provides the funding and establishes national policy for radioactive waste management in Canada. The LLRWMO expertise includes project managers, environmental remediation specialists, radiation surveyors, communications staff and administrative support staff. The LLRWMO in providing all aspects of project oversight and implementation contracts additional resources supplementing core staff capacity as project/program demands require. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Prospective implementation of a software application for pre-disposal L/ILW waste management activities in Romania

Romania is actively engaged to update the Medium and Long Term National Strategy for Safe Management of Radioactive Waste and to approve the Road Map for Geological Repository Development. Considering relevant documents to be further updated, about 122,000 m{sup 3} SL-LILW are to be disposed in a near surface facility that will have room, also, for quantities of VLLW. Planned date for commissioning is under revision. Taking into account that in this moment there are initiated several actions for the improvement of the technical capability for LILW treatment and conditioning, several steps for the possible use of SAFRAN software were considered. In view of specific data for Romanian radioactive waste inventory, authors are trying to highlight the expected limitations and unknown data related with the implementation of SAFRAN software for the foreseen pre-disposal waste management activities. There are challenges that have to be faced in the near future related with clear definition of the properties of each room, area and waste management activity. This work has the aim to address several LILW management issues in accordance with national and international regulatory framework for the assurance of nuclear safety. Also, authors intend to develop their institutional capability for the safety demonstration of the existent and future radioactive waste management facilities and activities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Geographic Information Systems as an Opportunity for Public Engagement in Environmental Data Analysis for Nuclear Waste Management - 17505

For half a century, scientists across government agencies, industry, academia and other research organizations have been using geographic information system (GIS) tools to display data collected for a wide variety of programs. Recent technology advances have made it possible for the public to also use GIS tools to display data. Meanwhile, around the world, volunteers are increasingly participating in citizen science activities that involve collecting environmental observations and measurements. Considering themes of broad interest to which citizen science and GIS tools could be applied, integrated nuclear waste management represents a potential opportunity for public engagement in environmental data analysis. In the United States, the Department of Energy's (DOE's) goal is to develop solutions for the long-term, sustainable management of the nation's spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from commercial electricity generation, as well as national defense activities. The DOE has been exploring options for an integrated waste management system to transport, store, and dispose of SNF and HLW. To support its efforts, DOE has been exploring ways to seek broad input from the public. Literature was reviewed to assess recent advances in GIS technology and citizen science that could contribute to public engagement in waste management planning. Results identified a variety of promising tools and applications that are readily accessible online, including QGIS and the U.S. Environmental Protection Agency's (EPA's) Real Time Geo-spatial Data Viewer (RETIGO). For example, interested members of the public could illustrate air quality, water quality, and other environmental data in GIS plots to visually represent local conditions over time. This paper highlights potential opportunities for those interested in citizen science and GIS tools as part of exploring options for public engagement in planning for an integrated waste management system. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ALARA on the radioactive waste management activities at NPP in Korea - 15189

This study examined and analyzed on-site experience to investigate the effect of the 'as low as reasonably achievable' (ALARA) principle on the level of radiation exposure management during NPPs' radioactive waste management activities. In particular, the ALARA principle was observed by various activities of radioactive waste management. According to 2012 data, workers' radiation exposure due to radioactive waste management activities in one light water reactor (LWR) unit amounted to a collective dose of 14.8 man-mSv, and this value corresponded to approximately 3.5% of the radiation exposure due to the NPP's total activities. The present study is expected to contribute to the reduction of workers' radiation exposure by analyzing and synthesizing field experience from the perspective of the ALARA principle during radioactive waste management, and transmitting the results to other NPPs. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Solutions for management of defective fuel assemblies - 15318

Defective fuel management is a major challenge for nuclear operators when the time comes for finding a long-term solution for their used (or spent) fuel assemblies. This question of defective fuel management can be raised in several cases: - For optimizing the remaining operating costs of shutdown reactors, the spent fuel pools must be emptied as soon as possible; a solution needs therefore to be found for evacuating all the spent fuel assemblies, defective fuel assemblies and in particular defective fuel rods included; - Some utilities are today facing a saturation of their reactor spent fuel pool; evacuating the defective fuel assemblies and extracted defective fuel rods allows optimizing the space in the pool. Whereas the solutions for managing intact used fuel assemblies are well-known, a specific technical solution must be implemented for managing the defective spent fuel assemblies as well. The purpose of this paper is to describe the existing solutions for the management of all types of defective fuel assemblies. Interim Dry Storage Solution Interim dry storage of defective spent fuel assemblies is being implemented for decades in the USA. Specific operations are performed for preparing the defective fuel assemblies for interim dry storage and they are then stored with intact used fuel assemblies in the dry storage cask. The advantage of such a solution is its short-term cost effectiveness. The paper presents the existing dry interim storage solutions for defective used fuel rods, the way they are implemented, the associated operational experience. Long-term Dry Storage Solution A long-term dry storage solution for defective fuel assemblies is being developed, compliant with direct disposal requirements. The solution is based on the encapsulation of each defective fuel rod into a fuel rod capsule and an associated specific dry storage licensing approach: this is the best available technology regarding long term storage safety requirements. The paper presents this unique capsule technology, the transport and storage casks that can be used for transportation of defective fuel rods to the storage facility, and the associated transport licensing approach currently used in Europe. Treatment Solution. The most definitive way to get rid of defective fuel assemblies is their treatment (or reprocessing) in a treatment plant. There is then no need to assess the behaviour of these specific used fuel assemblies as for an interim storage facility or a final repository. The advantage of such a solution is its sustainable approach. The paper presents the existing transport and treatment solutions, the way they are implemented, the associated operational experience. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Optimised norm waste management taking benefit of 60 years of nuclear waste experience - 15357

Studsvik has more than 60 years of experience of managing radioactive waste from both our own operations as well from international and other domestic waste generators. During last 5 years our services to generators of NORM waste has increased significantly. Building upon the experience of managing nuclear waste the management of NORM waste can be optimised. An optimized NORM waste management strategy should be based upon a graded approach taking into account the actual conditions (technical as well as regulatory). In line with how work is carried out in the nuclear industry it is recommended that material should be treated for reuse or recycling when appropriate as opposed to conditioning for disposal. This paper covers the principals and practices that should be adopted when considering NORM waste management from initial characterisation to the safe disposal or clearance of the material for reuse or recycling. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Improving Workplace Management and Performance - A Lost Art? - 16004

Undertaking projects on nuclear licensed sites or on sites with a radiological connotation will undoubtedly lead to a variety of challenges. In many instances these challenges will be slightly different to those affiliated with projects on sites which do not have a radiological concern. However, common approaches can still often be found and transferable learning from other industries can also be applied. The majority of these challenges relate to worker safety (both occupationally and radiologically), protection of the public and the environment, public communication, and the choice of technical and logistical approaches taken (e.g. for areas like decommissioning, waste management, environmental remediation). Notwithstanding these challenges the success of site-related projects also depends heavily on the functionality of the project team. The aim here is to highlight a number of logical approaches that are too often overlooked and which might often lead to improvements in workplace management and performance. A successful project team is rarely built overnight, as it relies on the establishment of a harmonious working atmosphere, and continuous communication as well as demonstrable recognition of the relevance of the role of the different team members. Improving workplace management and performance can be approached through a number of ways. First, there are clear benefits in developing an industry-specific culture, but of equal importance is the application of learning from other industries. Second, improving workplace performance often comes down to treating people in the right manner and showing them respect. A culture of competition and blame in the workplace often results in individuals being too defensive or withholding useful information. Creating a harmonious atmosphere can help to overcome some of these barriers. The third area of improving workplace management and performance is through developing and empowering personnel on a more formal basis. This can be achieved through initiatives like the Investors In People (IiP) National Standard, which many countries now support. Achieving this National Standard provides an opportunity to demonstrate to both your personnel and your clients that you are committed to this initiative and that you want to improve workplace performance. The IiP National Standard can lead to a range of benefits. A combination of formal initiatives, developing sector-specific approaches and applying learning from other industries can lead to noticeable improvements in workplace management and performance. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Innovative Waste Packaging and Associated Venting/Hydrogen Management - 16594

The original strategy for managing intermediate level waste (ILW) was developed in the 1980s by the UK Nuclear Industry Radioactive Waste Executive (NIREX), which is now the Radioactive Waste Management Limited (RWM), a wholly owned subsidiary of the Nuclear Decommissioning Authority (NDA). The strategy involved retrieving ILW, sorting and encapsulating it in cement based grout within thin walled stainless steel containers. The containers would then be transferred to a large purpose-built shielded ILW store on site, where they would be stored until the planned final deep geological disposal facility becomes available. In recognition of the high up-front costs of such a strategy, which requires remote facilities for the encapsulation and storage, and coupled with the long programme duration for the design, construction and commissioning of these facilities, waste management organisations responsible for managing the clean-up of legacy facilities within the UK have, in recent years, sought innovative solutions which could potentially both accelerate clean-up and hazard reduction on sites, and with a lower overall programme lifecycle cost. Many of the recent innovative solutions are focused around a new family of packaging designs known as robust shielded containers (RSCs). These are self-shielded containers manufactured from materials such as ductile cast iron or fabricated steel. These containers offer the potential to package wastes for disposal without encapsulation and avoid the need for a highly engineered remote handled shielded store for interim storage. The paper provides a high level overview of the generic concepts of RSCs developed by Croft and focuses on the specific challenges of wasteform evolution on waste package integrity and performance. In particular, the integrity and performance of the filtered vent system required to manage internal pressurisation and to ensure sufficient venting capacity of hydrogen and other evolved gases. The paper summarises the analysis by ARUP undertaken to substantiate the RSC integrity under detonation/deflagration explosion loadings arising from hydrogen accumulation. Analyses of the structural response of the filter assembly were undertaken for both detonation and deflagration explosion scenarios, with the loadings applied to the filter housing rim and to the filter vent cover. The paper also presents evidence of the mechanical performance of the filter medium in terms of pressure transients during deflagration events and the degree to which filtration efficiency is maintained. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development and Delivery of National Strategic Approaches to Radioactive Waste Management in the UK - 16595

The UK has limited capacity for the management of radioactive wastes. Such capacity is needed to enable nuclear and non-nuclear sectors to continue to make responsible use of radioactive substances (e.g. for health care provision) as well as to deliver key objectives such as the decommissioning and clean-up of the civil nuclear legacy. A revision in UK LLW policy in 2007 led to the development of a range of national LLW strategies, each focusing on a particular radioactive waste sector. For various reasons each of the strategies was developed in a different way. The success of these strategies to-date includes the development of a range of new routes for LLW management, greater transparency and understanding of the challenges facing LLW management across the UK, and recognition of priorities for national work, e.g., to address issues such as the management of radioactive asbestos waste and the treatment of metallic radioactive wastes. The work also revealed common issues across each of the waste producing sectors, and the opportunity to improve future waste management through further integration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Literature Review and Compilation of Nuclear Waste Management System Attributes for Use in Multi-Objective System Evaluations - 16618

The purpose of this work was to compile a comprehensive initial set of potential nuclear waste management system attributes. This initial set of attributes is intended to serve as a starting point for additional consideration by system analysts and planners to facilitate the development of a waste management system multi-objective evaluation framework based on the principles and methodology of multi-attribute utility analysis. The compilation is primarily based on a review of reports issued by the Canadian Nuclear Waste Management Organization (NWMO) and the Blue Ribbon Commission on America's Nuclear Future (BRC), but also an extensive review of the available literature for similar and past efforts as well. Numerous system attributes found in different sources were combined into a single objectives-oriented hierarchical structure. This study provides a discussion of the data sources and the descriptions of the hierarchical structure. A particular focus of this study was on collecting and compiling inputs from past studies that involved the participation of various external stakeholders. However, while the important role of stakeholder input in a country's waste management decision process is recognized in the referenced sources, there are only a limited number of in-depth studies of the stakeholders' differing perspectives. Compiling a comprehensive hierarchical listing of attributes is a complex task since stakeholders have multiple and often conflicting interests. The BRC worked for two years (January 2010 to January 2012) to 'ensure it has heard from as many points of view as possible'. The Canadian NWMO study took four years and ample resources, involving national and regional stakeholders' dialogs, internet-based dialogs, information and discussion sessions, open houses, workshops, round-tables, public attitude research, web site, and topic reports. The current compilation effort benefited from the distillation of these many varied inputs conducted by the previous studies. The initial set of attributes is intended to provide a starting point for considering potential objectives for evaluating nuclear waste management system options. It is envisioned that this initial set will evolve and be revised as new and additional input is received from stakeholders on various attributes and their relative importance. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Guidance on Good Practice for Waste Management in Decommissioning - 19080

The World Nuclear Association (WNA) is an international organization that represents the global nuclear industry. Its mission is to promote a wider understanding of nuclear energy among key international influencers by producing authoritative information, developing common industry positions, and contributing to the energy debate. The Waste Management and Decommissioning Working Group of WNA monitors developments and shapes industry positions in radioactive waste management in nuclear decommissioning. The Working Group promotes accepted international principles and methods, including the sustainable management of natural resources, appropriate re-use and recycling of material, as well as safe and cost-efficient disposal of radioactive waste. In 2015, the WNA decided to identify international good practices in decommissioning and waste management and to appoint a group of international experts to produce a report bringing together this knowledge. The report is aimed at policy- and decision-makers, as well as nuclear professionals looking for guidance or facing decommissioning challenges related to waste management. The scope of the report covers commercial nuclear plants and nuclear research facilities, including legacy plants being decommissioned after normal operation. Although light water and graphite reactor types are mainly considered, the methods described can be applied to other nuclear facilities. The report is due to be published in February 2019. This paper summarizes its findings and recommendations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Management and Disposal of U.S. Department of Energy Spent Nuclear Fuel - 19133

Congress created the U.S. Nuclear Waste Technical Review Board (NWTRB) in the 1987 Nuclear Waste Policy Amendments Act (Public Law 100-203) to evaluate the technical and scientific validity of activities undertaken by the Secretary of Energy to implement the Nuclear Waste Policy Act. In accordance with this mandate, the NWTRB reviewed the U.S. Department of Energy's (DOE) efforts to manage the inventory of spent nuclear fuel (SNF) that is under its control (DOE SNF) at several facilities around the country: the Hanford Site in Washington, the Idaho National Laboratory (INL) in Idaho, the Savannah River Site (SRS) in South Carolina, and the Fort St. Vrain independent spent fuel storage installation (ISFSI) in Colorado. While disposal of SNF and high-level radioactive waste (HLW) in a deep geologic repository remains the ultimate objective of the DOE nuclear waste management program, there is significant uncertainty about when such a repository will be constructed in the United States. Until disposal occurs, it is essential to manage DOE SNF in a way that will facilitate its eventual disposal, and it is also important to improve understanding of processes related to packaging and storage of the SNF that could affect its future transportation and disposal. The NWTRB's review, which was a multi-year effort, was documented in a report to Congress and the Secretary of Energy and is summarized here. The NWTRB reviewed the quantities and characteristics of DOE SNF at each of the four sites. It also examined DOE packaging and storage activities and plans at each of the sites. The NWTRB highlighted three main issue areas in its review. First, the review identified issues related to managing the aging of DOE SNF and the facilities used to store the DOE SNF. Second, the review addressed issues related to packaging of stored non-naval DOE SNF into a standard canister. Third, the NWTRB assessed issues that could affect disposal of DOE SNF if DOE continues to evaluate a range of repository settings. Based on the information and findings developed as part of its review, the NWTRB made six recommendations to Congress and the Secretary of Energy related to aging management, packaging, and disposal of DOE SNF. DOE has begun to address some of the NWTRB recommendations. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Panel Session 2: 30 Year Anniversary of US DOE-Environmental Management-EM Update

This panel focused on Senior US DOE Managers from Washington, D.C. speaking on the pressing issues facing US DOE EM sites and the 30 year anniversary of DOE - EM. The panel was moderated by Martin Schneider, Longenecker and Associates. Presentations proposed include: 1 - DOE Environmental Management Update From EM-2 (Mark Gilbertson, US DOE EM (USA)); 2 - DOE Environmental Management Update From EM-3 (Jeffrey Griffin, US DOE EM (USA)); 3 - DOE Environmental Management Update From EM-4 (Betsy Connell, US DOE EM (USA)); 4 - DOE Environmental Management Update From EM-5 (Steve Trischman, US DOE EM (USA))

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Panel Session 52: US DOE Featured Site Idaho - Managing a Multi-Mission Site (4/5)

This panel focused on discussions related to managing a multi-mission site. The Idaho National Laboratory (INL) Site supports Department of Energy (DOD) Environmental Management (EM), Nuclear Energy (NE), Homeland Security, and the US Navy. Missions cross boundaries in areas such as spent nuclear fuel, waste management, and shared services. The EM mission is split between two separate contracts: the research component with the INL and the execution component with the Idaho Cleanup Project (ICP). Panelists discussed the unique aspects of managing a multi-mission site and their challenges and lessons learned. Presentation proposed: Managing a Multi-Mission Site (Robert Boston, US DOE (USA), Juan Alvarez, Battelle - Idaho National Laboratory (USA), John Zimmerman, US DOE Idaho Operations Office (USA), Frederick Hughes, Fluor Idaho, LLC (USA))

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Unstated assumptions in alarm management - 202

Alarm management in the process industries has been an increasing area of activity since the first publications of EEMUA 191 in 1999 and ISA18.2 in 2008. Most major oil and chemical companies have adopted some or all of the metrics for alarm management presented in these documents. However, simply targeting for these metrics might not be the best course of action for a company. Many of the metrics involve assumptions or logic not explicitly stated in the guidelines, assumptions that might not be valid for a given console or plant. In other cases, metrics are the result of implied, rather than explicit, relationships between alarm guidelines. Again, the implied connection might not be true under certain circumstances. Understanding these unstated underpinnings of alarm management can facilitate the implementation of a useful and efficient alarm management program. This paper explores some of the key unstated assumptions in alarm management and how changes in those assumptions can alter both the interpretation of alarm metrics as well as what metrics are utilized. (authors)

47 OTHER INSTRUMENTATION↗

Velo: Riding the Knowledge Management Wave for Simulation and Modeling

Modern scientific enterprises are inherently knowledge-intensive. In general, scientific studies in domains such as geosciences, climate, and biology require the acquisition and manipulation of large amounts of experimental and field data in order to create inputs for large-scale computational simulations. The results of these simulations must then be analyzed, leading to refinements of inputs and models and further simulations. Further, these results must be managed and archived to provide justifications for publications and regulatory decisions that are based on these models. In this paper we describe our Velo framework that is designed as a reusable, domain independent knowledge management infrastructure for modeling and simulation. Velo leverages, integrates, and extends open source collaborative and content management technologies to create a scalable and flexible core platform that can be tailored to specific scientific domains. In this paper we describe the architecture of Velo for managing and associating the various types of data that are used and created in modeling and simulation projects, as well as the framework for integrating domain-specific tools. To demonstrate a realization of Velo, we describe the Geologic Sequestration Software Suite (GS3) that has been developed to support geologic sequestration modeling. This provides a concrete example of the inherent extensibility and utility of our approach.

99 GENERAL AND MISCELLANEOUS↗

Long-Term Information Management (LTIM) of Safeguards Data at Repositories: Phase II

One of the challenges of implementing safeguards for geological repositories will be the long-term preservation of safeguards-related data for 100 years or more. While most countries considering the construction and operation of such facilities agree that safeguards information should be preserved, there are gaps with respect to standardized requirements, guidelines, timescales, and approaches. This study analyzes those gaps and explores research to clarify stakeholder needs, identify current policies, approaches, best practices and international standards, and explores existing safeguards information management infrastructure. The study also attempts to clarify what a safeguards data classification system might look like, how long data should be retained, and how information should be exchanged between stakeholders at different phases of a repository’s life cycle. The analysis produced a variety of recommendations on what information to preserve, how to preserve it, where to store it, retention options and how to exchange information in the long term. Key findings include the use of the globally recognized international records management standard, ISO15489, for guidance on the development of information management systems, and the development of a Key Information File (KIF). The KIF could be used to identify only the most relevant, high-level safeguards information and the history of decision making about the repository. The study also suggests implementing on-site and off-site records storage in digital and physical form; developing a safeguards data classification system; long-term records retention with periodic reviews every 5 to 10 years during each phase of the repository life cycle; and establishing transition procedures well in advance so that data shepherds and records officers can transfer information with incoming facility managers effectively and efficiently. These and other recommendations are further analyzed in this study.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Waste Management Information System (WMIS) User Guide

This document provides the user of the Waste Management Information System (WMIS) instructions on how to use the WMIS software. WMIS allows users to initiate, track, and close waste packages. The modular design supports integration and utilization of data throuh the various stages of waste management. The phases of the waste management work process include generation, designation, packaging, container management, procurement, storage, treatment, transportation, and disposal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗