Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “magnetization reversal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Anomalous type III bursts explained in terms of intermittent solar wind streams observed by Pioneer spacecraft.

Occasional solar radio bursts drift downward in frequency (like type III bursts), but the drift slows or ceases or it may even reverse. These anomalous forms are called L-bursts, U-bursts, etc., and are observed as low as 1 MHz by spacecraft. The conventional explanation involves guidance of relativistic exciting particles by solar magnetic fields that do not have the spiral shape expected in undisturbed conditions. A reasonable alternative explanation is possible and, indeed, it follows directly from the inferences which have been drawn from the Stanford dual-frequency experiment flown on four Pioneer spacecraft. Analysis of temporal variations in these data leads to the conclusion that narrow streams of enhanced concentration have lifetimes which are typically about one day and the streams seem to be intermittently ejected by long-enduring sources at the sun. Each enhancement is thought to lie along a spiral and to have a beginning and an end. It may happen that relativistic exciters encounter the tail of such a discrete streamer; the concentration encountered by such exciters would initially decline but, at the streamer tail, it would level off and perhaps increase. The plasma frequency versus time (the burst frequency) would then cease to drop in the typical type III profile and would level off or increase (as in a U-burst).

Croft, T. A.↗
NASA NTRS1975

Effect of interplanetary magnetic field on ionosphere over the magnetic equator

Large and quick changes of the latitude of the interplanetary magnetic field from its southward to northward direction are shown to be associated with the disappearance of the Es-q layer (Knecht, 1959) at the equatorial ionosphere during the daytime or with the reversal of E region horizontal and F region vertical electron drifts during both night and day. This phenomenon is suggested as the imposition of an electric field in the ionosphere in a direction opposite to that of the Sq electric field. The resultant electrostatic field on the equatorial ionosphere would be decreased or even reversed from its normal direction, resulting in the reduction of electron drift velocity. When the normal Sq field is over-compensated by the magnetospheric electric field, the electron drifts are reversed and the irregularities in the E region due to the cross-field instabilities are inhibited, resulting in the sudden disappearance of the Es-q layers.

Rastogi, R. G.↗
NASA NTRS2019

Magnetic Flux Cancelation as the Buildup and Trigger Mechanism for CME-Producing Eruptions in Two Small Active Regions

We follow two small, magnetically isolated CME (Coronal Mass Ejection)-producing solar active regions (ARs) from the time of their emergence until several days later, when their core regions erupt to produce the CMEs. In both cases, magnetograms show: (a) following an initial period where the poles of the emerging regions separate from each other, the poles then reverse direction and start to retract inward; (b) during the retraction period, flux cancelation occurs along the main neutral line of the regions, (c) this cancelation builds the sheared core field/flux rope that eventually erupts to make the CME. In the two cases, respectively 30 percent and 50 percent of the maximum flux of the region cancels prior to the eruption. Recent studies indicate that solar coronal jets frequently result from small-scale filaments eruptions (Sterling et al. 2015), with those “minifilament” eruptions also being built up and triggered by cancelation of magnetic flux (Panesar et al. 2016). Together, the small-AR eruptions here and the coronal jet results suggest that isolated bipolar regions tend to erupt when some threshold fraction, perhaps in the range of 50 percent, of the region’s maximum flux has canceled. Our observed erupting filaments/flux ropes form at sites of flux cancelation, in agreement with previous observations. Thus, the recent finding that minifilaments that erupt to form jets also form via flux cancelation is further evidence that minifilaments are small-scale versions of the long-studied full-sized filaments. (Details are in Sterling et al. 2018, ApJ, 864, 68.) Supported by NASA's Heliophysics Guest Investigators (HGI) Program and the MSFC (Marshall Space Flight Center)/Hinode project.

Sterling, Alphonse C.↗
NASA NTRS2016

Dynamic Characterization of Galfenol (Fe81.6Ga18.4)

Galfenol has the potential to transform the smart materials industry by allowing for the development of multifunctional, load-bearing devices. One of the primary technical challenges faced by this development is the very limited experimental data on Galfenol's frequency-dependent response to dynamic stress, which is critically important for the design of such devices. This report details a novel and precise characterization of the constitutive behavior of polycrystalline Galfenol (Fe81.6Ga18.4) under quasi-static (1 Hz) and dynamic (4 to 1000 Hz) stress loadings. Mechanical loads are applied using a high-frequency load frame. Quasi-static minor and major hysteresis loop measurements of magnetic flux density and strain are presented for constant electromagnet currents (0 to 1.1 A) and constant magnetic fields 0 to 14 kA/m (0 to 180 Oe). The dynamic stress amplitude for minor and major loops is 2.88 and 31.4 MPa (418 and 4550 psi), respectively. Quasi-static material properties closely match published values for similar Galfenol materials. Quasi-static actuation responses are also measured and compared to quasi-static sensing responses; the high degree of reversibility seen in the comparison is consistent with published measurements and modeling results. Dynamic major and minor loops are measured for dynamic stresses up to 31 MPa (4496 psi) and 1 kHz, and the bias condition resulting in maximum, quasi-static sensitivity. Eddy current effects are quantified by considering solid and laminated Galfenol rods. Three key sources of error in the dynamic measurements are accounted for: (1) electromagnetic noise in strain signals due to Galfenol's magnetic response, (2) error in load signals due to the inertial force of fixturing, and (3) phase misalignment between signals due to conditioning electronics. For dynamic characterization, strain error is kept below 1.2 percent of full scale by wiring two collocated gauges in series (noise cancellation) and through leadwire weaving. Inertial force error is kept below 0.41 percent by measuring the dynamic force in the specimen using a nearly collocated piezoelectric load washer. The phase response of all conditioning electronics is explicitly measured and corrected for. In general, as frequency is increased, the sensing response becomes more linear because of an increase in eddy currents. As frequency increases above approximately 100 Hz, the elbow in the strain-versus-stress response disappears as the active (soft) regime stiffens toward the passive (hard) regime. Under constant-field conditions, the loss factors of the solid rod peak between 200 and 600 Hz, rather than exhibiting a monotonic increase. Compared to the solid rod, the laminated rod exhibits much slower increases in hysteresis with frequency, and its quasi-static behavior extends to higher frequencies. The elastic modulus of the laminated rod decreases between 100 and 300 Hz; this trend is currently unexplained.

Dynamic sensing↗
DOE OSTI2020

Anti-symmetric representation of the extended magnetohydrodynamic equations

We introduce the anti-symmetric representation of the extended magnetohydrodynamic (MHD) equations. In this representation, the use of the anti-symmetric flux operator (∇·ν+ν·∇) results in conservation theorems with discrete analogs. Inherently robust numerical applications are achieved with little effort, and conservation to machine precision is possible with simple numerical schemes. Starting from the two-fluid equations, we construct a single-fluid MHD model based on generalized center-of-mass variables for the mass (√ρ), momentum (√ρν), and pressure (√ p ). This model is shown to possess identical conservation properties to the two-fluid system, with the only restriction being the use of a single temperature. Common approximations to the Braginskii heat fluxes and to the gyroviscous stress tensor are cast into our representation for convenience. The discrete conservation properties are verified using the classic Orszag–Tang vortex problem. In addition to the favorable mass, momentum, and energy conservation properties, the time reversibility of the simulations is demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Josephson detection of time-reversal symmetry broken superconductivity in SnTe nanowires

A Josephson junction (JJ) couples the supercurrent flowing between two weakly linked superconductors to the phase difference between them via a current-phase relation (CPR). While a sinusoidal CPR is expected for conventional junctions with insulating weak links, devices made from some exotic materials may give rise to unconventional CPRs and unusual Josephson effects. In this work, we present such a case: we investigate the proximity-induced superconductivity in SnTe nanowires by incorporating them as weak links in JJs and observe a deviation from the standard CPR. We report on indications of an unexpected breaking of time-reversal symmetry in these devices, detailing the unconventional characteristics that reveal this behavior. These include an asymmetric critical current in the DC Josephson effect, a prominent second harmonic in the AC Josephson effect, and a magnetic diffraction pattern with a minimum in critical current at zero magnetic field. The analysis examines how multiband effects and the experimentally visualized ferroelectric domain walls give rise to this behavior, giving insight into the Josephson effect in materials that possess ferroelectricity and/or multiband superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Inductance meets memory in a quantum magnet

Orbital degrees of freedom offer a largely untapped route to emergent dynamical phenomena in correlated quantum materials. However, it remains unclear whether collective orbital states can intrinsically generate both reactive and memory functionalities in a bulk system. Here we show that in the ferrimagnet Mn₃Si₂Te₆, nonequilibrium reconfiguration of chiral orbital currents produces both emergent inductance and nonvolatile memristance as intrinsic properties of a single crystal. At low frequency and under a magnetic field along the c axis, coherent orbital-current domains generate robust clockwise inductive I-V loops. At higher frequency and low field, current-driven first-order reconfiguration leads to incomplete reversal and metastable trapping, producing an intrinsic electromotive force and a finite remanent voltage at zero current. These results establish orbital currents as a class of quantum state variables that encode both reactive and memory functionalities, opening routes toward intrinsically reconfigurable and energy-efficient electronic systems.

Cao, Tristan [University of Colorado, Boulder]↗
DOE OSTI2021

Fermi surfaces of the topological semimetal CaSn 3 probed through de Haas van Alphen oscillations

Abstract In the search of topological superconductors, nailing down the Fermiology of the normal state is as crucial a prerequisite as unraveling the superconducting pairing symmetry. In particular, the number of time-reversal-invariant momenta (TRIM) in the Brillouin zone enclosed by Fermi surfaces is closely linked to the topological class of time-reversal-invariant systems, and can experimentally be investigated. We report here a detailed study of de Haas van Alphen quantum oscillations in single crystals of the topological semimetal CaSn 3 with torque magnetometry in high magnetic fields up to 35 T. In conjunction with density functional theory based calculations, the observed quantum oscillations frequencies indicate that the Fermi surfaces of CaSn 3 enclose an odd number of TRIM, satisfying one of the proposed criteria to realize topological superconductivity. Nonzero Berry phases extracted from the magnetic oscillations also support the nontrivial topological nature of CaSn 3 .

Physics↗
NASA NTRS1987

Simulations of the sun's polar magnetic fields during sunspot cycle 21

Regarding new bipolar magnetic regions as sources of flux, the evolution of the radial component of the solar photospheric magnetic field is simulated during 1976-1984, and the corresponding evolution of the line-of-sight polar fields as seen from earth is derived. The observed timing and strength of the polar-field reversal during cycle 21 can be accounted for by supergranular diffusion alone, for a diffusion coefficient of 800 sq km/sec. For an assumed 300 sq km/sec rate of diffusion, on the other hand, a poleward meridional flow with a moderately broad profile and a peak speed of 10 m/s reached at about 5 deg latitude is required to obtain agreement between the simulated and observed fields. Such a flow accelerates the transport of following-polarity flux to the polar caps, but also inhibits the diffusion of leading-polarity flux across the equator. For flows faster than about 10 m/s, the latter effect dominates, and the simulated polar fields reverse increasingly later and more weakly than the observed fields.

Devore, C. Richard↗
DOE OSTI2022

Optical fingerprints of the electronic band reconstruction in van der Waals magnetic materials

We report a broadband study of the charge dynamics in the van der Waals magnetic materials 2H-M x TaS 2 (M = Mn and Co), which span the onset of both long-range antiferromagnetic (AFM) and ferromagnetic (FM) order, depending on the intercalation M and its concentration x. We discover a spectral weight (SW) shift from high to low energy scales for FM compositions, while reversely SW is removed from low towards high spectral energies for AFM compounds. This maps the related reconstruction of the electronic band structure along the crossover from the FM to AFM order, which restores an occupation balance in the density of states between spin majority and minority bands of the intercalated 3d elements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Simultaneous Development of Antiferromagnetism and Local Symmetry Breaking in a Kagome Magnet (Co 0.45 Fe 0.55 )Sn

CoSn and FeSn, two kagome-lattice metals, have recently attracted significant attention as hosts of electronic flat bands and emergent physical properties. However, current understandings of their physical properties are limited to knowledge of the average crystal structure. Here, we report the Fe-doping induced coemergence of the antiferromagentic (AFM) order and local symmetry breaking in (Co 0.45 Fe 0.55 )Sn. Rietveld analysis on the neutron and synchrotron X-ray diffraction data indicates A-type antiferromagnetic order with the moment pointing perpendicular to the kagome layers, associated with the anomaly in the MSn(1) 2 Sn(2) 4 (M = Co/Fe) octahedral distortion and the lattice constant c. Reverse Monte Carlo (RMC) modeling of the synchrotron X-ray total scattering results captured the subtle local orthorhombic distortion involving off-axis displacements of Sn(2). Our results indicate that the stable hexagonal lattice above T N becomes unstable once the A-type AFM order is formed below T N . Here we argue that the local symmetry breaking has a magnetic origin, since the spatially varied M–Sn(2) bond lengths arise from out-of-plane magnetic exchange coupling J c via the exchange pathway M–Sn(2)–M. Our study provides comprehensive information on the crystal structure in both long-range scale and local scale, unveiling unique coupling between AFM order, octahedral distortion, and hidden local symmetry breaking.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice

Orbital anisotropy at interfaces in magnetic heterostructures has been key to pioneering spin–orbit-related phenomena. However, modulating the interface’s electronic structure to make it abnormally asymmetric has been challenging because of lack of appropriate methods. Here, the authors report that low-energy proton irradiation achieves a strong level of inversion asymmetry and unusual strain at interfaces in [Co/Pd] superlattices through nondestructive, selective removal of oxygen from Co3O4/Pd superlattices during irradiation. Structural investigations corroborate that progressive reduction of Co3O4into Co establishes pseudomorphic growth with sharp interfaces and atypically large tensile stress. The normal component of orbital to spin magnetic moment at the interface is the largest among those observed in layered Co systems, which is associated with giant orbital anisotropy theoretically confirmed, and resulting very large interfacial magnetic anisotropy is observed. All results attribute not only to giant orbital anisotropy but to enhanced interfacial spin–orbit coupling owing to the pseudomorphic nature at the interface. They are strongly supported by the observation of reversal of polarity of temperature-dependent Anomalous Hall signal, a signature of Berry phase. This work suggests that establishing both giant orbital anisotropy and strong spin–orbit coupling at the interface is key to exploring spintronic devices with new functionalities.

42 ENGINEERING↗
DOE OSTI2025

Exploring a new synthesis route to lithium-excess disordered rock salt (DRX) cathode materials

Lithium-excess disordered rock salt (DRX) materials are promising candidates for Co/Ni-free Li-ion cathodes due to their high specific energy (800+ W h kg −1 ) and compositional flexibility. DRX cathodes are typically synthesized using solid-state reactions, which are difficult to scale and provide little-to-no control over particle morphology. Here, to address this bottleneck, the present study reports a two-step, solution-based reaction route to prepare Mn/Ti-based DRX oxyfluoride cathodes with nominal compositions of Li 1.25 Mn 0.5 Ti 0.3 O 1.95 F 0.05 and Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 . More specifically, a glycine–nitrate combustion reaction is used to produce a lithiated transition metal oxide, which is further reacted with LiF to produce high-purity DRX powders. Remarkably, this route yields 80–90% pure DRX after annealing for 1 h at 800–1000 °C, and 19 F solid-state nuclear magnetic resonance (ssNMR) spectra demonstrate that F− anions are successfully incorporated into the DRX structure. Cathodes prepared using this approach exhibit promising electrochemical performance, with Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 attaining reversible capacities ∼210 mA h g −1 and moderate cycling stability in half cells (65% capacity retention over 150 cycles). Overall, these results demonstrate that utilizing novel metal oxide precursors presents a viable and largely unexplored method to produce high-performance Co/Ni-free DRX cathodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Electronically reconfigurable complex oxide heterostructure freestanding membranes

In recent years, lanthanum aluminate/strontium titanate (LAO/STO) heterointerfaces have been used to create a growing family of nanoelectronic devices based on nanoscale control of LAO/STO metal-to-insulator transition. The properties of these devices are wide-ranging, but they are restricted by nature of the underlying thick STO substrate. Here, single-crystal freestanding membranes based on LAO/STO heterostructures were fabricated, which can be directly integrated with other materials via van der Waals stacking. The key properties of LAO/STO are preserved when LAO/STO membranes are formed. Conductive atomic force microscope lithography is shown to successfully create reversible patterns of nanoscale conducting regions, which survive to millikelvin temperatures. The ability to form reconfigurable conducting nanostructures on LAO/STO membranes opens opportunities to integrate a variety of nanoelectronics with silicon-based architectures and flexible, magnetic, or superconducting materials.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Structure of coronal neutral sheets

A qualitative model for the structure of the neutral sheet lying along the axis of coronal streamers is developed. The internal topology of the sheet is that of extremely thin magnetic tongues greatly distended outward by the solar wind expansion inside the sheet. Due to finite conductivity effects, expansion is taking place across the field lines but is retarded relative to the external flow by the reverse jxB force. The sheet thickness is determined by three considerations: the electrical conductivity that specifies the magnitude of the gradients in field strength, the expansion velocity that stretches the field lines outward decreasing the sheet thickness, and finally, the lateral pressure balance that limits the approach of the oppositely directed external field toward the neutral plane. If sigma is the electrical conductivity, the sheet thickness is shown to be proportional to sigma-1/3. For an electron conductivity evaluated perpendicular to the internal field in the sheet, the thickness is of the order of 100 km in the inner corona and 10,000 km at 1 AU. Microturbulence and instabilities are expected to yield dimensions greater than these theoretical values since these effects tend to reduce the effective conductivity.

Pneuman, G. W.↗
NASA NTRS1991

The energetic ion signature of an O-type neutral line in the geomagnetic tail

An energetic ion signature is presented which has the potential for remote sensing of an O-type neutral line embedded in a current sheet. A source plasma with a tailward flowing Kappa distribution yields a strongly non-Kappa distribution after interacting with the neutral line: sharp jumps, or ridges, occur in the velocity space distribution function f(nu-perpendicular, nu-parallel) associated with both increases and decreases in f. The jumps occur when orbits are reversed in the x-direction: a reversal causing initially earthward particles (low probability in the source distribution) to be observed results in a decrease in f, while a reversal causing initially tailward particles to be observed produces an increase in f. The reversals, and hence the jumps, occur at approximately constant values of perpendicular velocity in both the positive nu parallel and negative nu parallel half planes. The results were obtained using single particle simulations in a fixed magnetic field model.

Martin, R. F., Jr.↗
NASA NTRS1995

Extended linear ion trap frequency standard apparatus

A linear ion trap for frequency standard applications is provided with a plurality of trapping rods equally spaced and applied quadruple rf voltages for radial confinement of atomic ions and biased level pins at each end for axial confinement of the ions. The trapping rods are divided into two linear ion trap regions by a gap in each rod in a common radial plane to provide dc discontinuity, thus dc isolating one region from the other. A first region for ion-loading and preparation fluorescence is biased with a dc voltage to transport ions into a second region for resonance frequency comparison with a local oscillator derived frequency while the second region is held at zero voltage. The dc bias voltage of the regions is reversed for transporting the ions back into the first region for fluorescence measurement. The dual mode cycle is repeated continuously for comparison and feedback control of the local oscillator derived frequency. Only the second region requires magnetic shielding for the resonance function which is sensitive to any ambient magnetic fields.

Prestage, John D.↗