Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “local strain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Skin-Stiffener Debond Prediction Based on Computational Fracture Analysis

Interlaminar fracture mechanics has proven useful for characterizing the onset of delaminations in composites and has been used with limited success primarily to investigate onset in fracture toughness specimens and laboratory size coupon type specimens. Future acceptance of the methodology by industry and certification authorities however, requires the successful demonstration of the methodology on structural level. For this purpose a panel was selected that is reinforced with stringers. Shear loading causes the panel to buckle and the resulting out-of-plane deformations initiate skin/stringer separation at the location of an embedded defect. For finite element analysis, the panel and surrounding load fixture were modeled with shell elements. A small section of the stringer foot and the panel in the vicinity of the embedded defect were modeled with a local 3D solid model. Across the width of the stringer foot the mixed-mode strain energy release rates were calculated using the virtual crack closure technique. A failure index was calculated by correlating the results with the mixed-mode failure criterion of the graphite/epoxy material. For small applied loads the failure index is well below one across the entire width. With increasing load the failure index approaches one first near the edge of the stringer foot from which delamination is expected to grow. With increasing delamination lengths the buckling pattern of the panel changes and the failure index increases which suggests that rapid delamination growth from the initial defect is to be expected.

Krueger, Ronald↗

Progressive Failure Analysis of Composite Stiffened Panels

A new progressive failure analysis capability for stiffened composite panels has been developed based on the combination of the HyperSizer stiffened panel design/analysis/optimization software with the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC). MAC/GMC discretizes a composite material s microstructure into a number of subvolumes and solves for the stress and strain state in each while providing the homogenized composite properties as well. As a result, local failure criteria may be employed to predict local subvolume failure and the effects of these local failures on the overall composite response. When combined with HyperSizer, MAC/GMC is employed to represent the ply level composite material response within the laminates that constitute a stiffened panel. The effects of local subvolume failures can then be tracked as loading on the stiffened panel progresses. Sample progressive failure results are presented at both the composite laminate and the composite stiffened panel levels. Deformation and failure model predictions are compared with experimental data from the World Wide Failure Exercise for AS4/3501-6 graphite/epoxy laminates.

Bednarcyk, Brett A.↗

The MHOST finite element program: 3-D inelastic analysis methods for hot section components. Volume 1: Theoretical manual

Formulations and algorithms implemented in the MHOST finite element program are discussed. The code uses a novel concept of the mixed iterative solution technique for the efficient 3-D computations of turbine engine hot section components. The general framework of variational formulation and solution algorithms are discussed which were derived from the mixed three field Hu-Washizu principle. This formulation enables the use of nodal interpolation for coordinates, displacements, strains, and stresses. Algorithmic description of the mixed iterative method includes variations for the quasi static, transient dynamic and buckling analyses. The global-local analysis procedure referred to as the subelement refinement is developed in the framework of the mixed iterative solution, of which the detail is presented. The numerically integrated isoparametric elements implemented in the framework is discussed. Methods to filter certain parts of strain and project the element discontinuous quantities to the nodes are developed for a family of linear elements. Integration algorithms are described for linear and nonlinear equations included in MHOST program.

Nakazawa, Shohei↗

NASA Engineering and Safety Center Technical Bulletin No. 20-07: Evaluating and Mitigating Liner Strain Spikes in COPV's

Unexpected cracking and leaking in bonded composite overwrapped pressure vessel (COPV) liners occurring in recent test programs have been attributed to liner strain spikes observed through measurement and predicted by analysis. Diminished load transfer between the liner and composite overwrap can lead to localized excessive liner yielding in the dome section. This diminished constraint can occur due to yielding of the adhesive or a manufacturing unbond defect. COPVs should be assessed for susceptibility to this new failure mode.

Evaluating↗

Dynamic delamination buckling in composite laminates under impact loading: Computational simulation

A unique dynamic delamination buckling and delamination propagation analysis capability has been developed and incorporated into a finite element computer program. This capability consists of the following: (1) a modification of the direct time integration solution sequence which provides a new analysis algorithm that can be used to predict delamination buckling in a laminate subjected to dynamic loading, and (2) a new method of modeling the composite laminate using plate bending elements and multipoint constraints. This computer program is used to predict both impact induced buckling in composite laminates with initial delaminations and the strain energy release rate due to extension of the delamination. It is shown that delaminations near the outer surface of a laminate are susceptible to local buckling and buckling-induced delamination propagation when the laminate is subjected to transverse impact loading. The capability now exists to predict the time at which the onset of dynamic delamination buckling occurs, the dynamic buckling mode shape, and the dynamic delamination strain energy release rate.

Grady, Joseph E.↗

Dynamic delamination buckling in composite laminates under impact loading - Computational simulation

A unique dynamic delamination buckling and delamination propagation analysis capability has been developed and incorporated into a finite element computer program. This capability consists of the following: (1) a modification of the direct time integration solution sequence which provides a new analysis algorithm that can be used to predict delamination buckling in a laminate subjected to dynamic loading, and (2) a new method of modeling the composite laminate using plate bending elements and multipoint constraints. This computer program is used to predict both impact induced buckling in composite laminates with initial delaminations and the strain energy release rate due to extension of the delamination. It is shown that delaminations near the outer surface of a laminate are susceptible to local buckling and buckling-induced delamination propagation when the laminate is subjected to transverse impact loading. The capability now exists to predict the time at which the onset of dynamic delamination buckling occurs, the dynamic buckling mode shape, and the dynamic delamination strain energy release rate.

Grady, Joseph E.↗

Sub-angstrom strain in high-entropy intermetallic boosts the oxygen reduction reaction in fuel cell cathodes

The strain effect of high-entropy intermetallic (HEI) catalysts on oxygen reduction reaction (ORR) performance remains largely unexplored, primarily due to the significant challenges associated with characterizing and calculating the intricate local coordination environments. Here, we design a nitrogen (N)-doped L1 0 -ordered PtCoNiFeCu intermetallic catalyst supported on Ketjenblack carbon (N-HEI/KB), and reveal the origin of the sub-angstrom strain in N-HEI and its impact on ORR performance by combining atomic-scale characterization and theoretical calculations. The synergistic interplay of the sub-angstrom strain, the pinning effect of metal-N bonds, and the high-entropy effect contribute to the competitive stability of N-HEI/KB catalysts, providing high current density of 1388 mA cm -2 at 0.7 V after 90,000 cycles even under harsh heavy-duty vehicle conditions. These findings broaden the avenues for designing high-performance high-entropy intermetallic cathode electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Explanation of the Dielectric Enhancement of Barium Titanate Nanoparticles Grown under Hydrothermal Conditions

Abstract When synthesized under certain conditions, barium titanate (BaTiO 3 , BTO) nanoparticles are found to have the non‐thermodynamic cubic structure at room temperature. These particles also have a several‐fold enhanced dielectric constant, sometimes exceeding 6000, and are widely used in thin‐layer capacitors. A hydrothermal approach is used to synthesize BTO nanocrystals, which are characterized by a range of methods, including X‐ray Rietveld refinement and the Williamson–Hall approach, revealing the presence of significant inhomogeneous strain associated with the cubic phase. However, X‐ray pair distribution function measurements clearly show the local structure is lower symmetry than cubic. This apparent inconsistency is resolved by examining 3D Bragg coherent diffraction images of selected nanocrystals, which show the existence of ≈50 nm‐sized domains, which are interpreted as tetragonal twins, and yet cause the average crystalline structure to appear cubic. The ability of these twin boundaries to migrate under the influence of electric fields explains the dielectric anomaly for the nanocrystalline phase.

36 MATERIALS SCIENCE↗

Strain and crystallographic identification of the helically concaved gap surfaces of chiral nanoparticles

Identifying the three-dimensional (3D) crystal plane and strain-field distributions of nanocrystals is essential for optical, catalytic, and electronic applications. However, it remains a challenge to image concave surfaces of nanoparticles. Here, we develop a methodology for visualizing the 3D information of chiral gold nanoparticles ≈ 200 nm in size with concave gap structures by Bragg coherent X-ray diffraction imaging. The distribution of the high-Miller-index planes constituting the concave chiral gap is precisely determined. The highly strained region adjacent to the chiral gaps is resolved, which was correlated to the 432-symmetric morphology of the nanoparticles and its corresponding plasmonic properties are numerically predicted from the atomically defined structures. This approach can serve as a comprehensive characterization platform for visualizing the 3D crystallographic and strain distributions of nanoparticles with a few hundred nanometers, especially for applications where structural complexity and local heterogeneity are major determinants, as exemplified in plasmonics.

36 MATERIALS SCIENCE↗

Continuum models for beam-like and plate-like lattice structures

A simple, rational approach is presented for developing continuum models for large repetitive beam-like and plate-like lattices with arbitrary configurations subjected to static, thermal and dynamic loadings. The continuum models for these structures are shear flexible beams and plates. They account for local effects in the repeating element of the actual structure and are characterized by their thermoelastic strain and kinetic energies from which the equations of motion and constitutive relations can be derived. The procedure for developing the expressions for thermoelastic strain and kinetic energies of the continuum involves introducing basic assumptions regarding the variation of the temperature, displacement and strain components in one or two directions (for plate-like and beam-like lattices) and obtaining effective thermoelastic and dynamic coefficients of the continuum in terms of material properties and geometry of the original lattice structure. The high accuracy of the continuum models developed is demonstrated by means of numerical examples.

Noor, A. K.↗

Large Prandtl number finite-amplitude thermal convection with Maxwell viscoelasticity

It has long been known that the earth behaves viscoelastically. Viscoelasticity may be of importance in two aspects of mantle convection, including time-dependent behavior and local storage of recoverable work. The present investigation makes use of thermal convection in a box as a prototype of mantle flow. It is demonstrated that recoverable work can be important to the local mechanical energy balance in the descending lithosphere. It is shown that, even when assuming large viscoelastic parameters, an inherent time-dependence of viscoelastic convection appears only in local exchanges of mechanical energy. There is no strong exchange between buoyant potential energy and recoverable strain energy in the Rayleigh number range investigated. The investigation is mainly concerned with viscoelastic effects occurring on a buoyant time scale. It is found that viscoelastic effects have a negligible influence on the long term thermal energetics of mantle convection.

Ivins, E. R.↗

A probabilistic approach to the evaluation of fatigue damage in a space propulsion system injector element

The fatigue damage of a space propulsion system component is computed using probabilistic structural analysis methods. The analysis takes into account the variations in static and dynamic loads, the uncertainty in structural damping, and the scatter in material fatigue resistance. The key elements of the probabilistic approach include: (1) a numerical engine model for describing the global component interface loads consistent with engine balance, (2) models for computing the local mode boundary conditions on the component, (3) a static structural analysis model that captures the strains at a damage critical location as a function of engine performance variables, (4) a finite element model for assessment of the random amplitude stress response due to random base and pressure excitations with uncertain power and correlation length, and (5) advanced first order reliability methods for computing the probabilities associated with the fatigue damage.

Rajagopal, K. R.↗

Effects of Passive Fuel-Air Mixing Control on Burner Emissions Via Lobed Fuel Injectors

The present experimental study examines the effects of differing levels of passive fuel-air premixing on flame structures and their associated NO(x) and CO emissions. Four alternative fuel injector geometries were explored, three of which have lobed shapes. These lobed injectors mix fuel and air and strain species inter-faces to differing extents due to streamwise vorticity generation, thus creating different local or core equivalence ratios within flow regions upstream of flame ignition and stabilization. Prior experimental studies of two of these lobed injector flowfields focused on non-reactive mixing characteristics and emissions measurements for the case where air speeds were matched above and below the fuel injector, effectively generating stronger streamwise vorticity than spanwise vorticity. The present studies examine the effects of airstream mismatch (and hence additional spanwise vorticity generation), effects of confinement of the crossflow to reduce the local equivalence ratio, and the effects of altering the geometry and position of the flameholders. NO(x) and CO emissions as well as planar laser-induced fluorescence imaging (PLIF) of seeded acetone are used to characterize injector performance and reactive flow evolution.

Mitchell, M. G.↗

Prostaglandin E2 increases the skeletal response to mechanical loading

The study tested the influence of prostaglandin E2 (PGE2) on the skeletal response to increased in vivo mechanical loading through a four-point bending device. One hundred and twenty Sprague-Dawley female rats (6 months old, 354 +/- 34 g) were divided into 12 groups to accommodate all possible combinations of doses of loads (25, 30, or 35 N) and PGE2 (0, 0.1, 0.3, or 1 mg/kg). Rats received subcutaneous injections of PGE2 daily and in vivo loading of the right tibia every Monday, Wednesday, and Friday for four weeks. Histomorphometric analysis of the periosteal and endocortical surfaces following in vivo dual fluorochrome labeling was performed on both the loaded region of the right tibial diaphysis and a similar region of the left tibial diaphysis. Without PGE2, the threshold for loading to stimulate bone formation was 30 N (peak strain 1360 mu epsilon) at the periosteal surface and 25 N (peak strain 580 mu epsilon) at the endocortical surface. Without loading, the minimum dose of PGE2 to stimulate bone formation at all surfaces was 1 mg/kg/day. When 1 mg/kg/day PGE2 was combined with the minimum effective load, an additive effect of PGE2 and loading on bone formation was observed at the endocortical surface, but a synergistic effect was noted at the periosteal surface. No combined effect of ineffective doses of loading and PGE2 was found. A synergistic effect at peak strains of approximately 1625 mu epsilon on the periosteal surface could suggest either the involvement of locally produced growth factors or autoregulation of endogenous synthesis of PGE2 by exogenously administered PGE2.

NASA Program Space Physiology and Countermeasures↗

Wall Pressure Unsteadiness and Side Loads in Overexpanded Rocket Nozzles

Surveys of both the static and dynamic wall pressure signatures on the interior surface of a sub-scale, cold-flow and thrust optimized parabolic nozzle are conducted during fixed nozzle pressure ratios corresponding to FSS and RSS states. The motive is to develop a better understanding for the sources of off-axis loads during the transient start-up of overexpanded rocket nozzles. During FSS state, pressure spectra reveal frequency content resembling SWTBLI. Presumably, when the internal flow is in RSS state, separation bubbles are trapped by shocks and expansion waves; interactions between the separated flow regions and the waves produce asymmetric pressure distributions. An analysis of the azimuthal modes reveals how the breathing mode encompasses most of the resolved energy and that the side load inducing mode is coherent with the response moment measured by strain gauges mounted upstream of the nozzle on a flexible tube. Finally, the unsteady pressure is locally more energetic during RSS, albeit direct measurements of the response moments indicate higher side load activity when in FSS state. It is postulated that these discrepancies are attributed to cancellation effects between annular separation bubbles.

Baars, Woutijn J.↗

Flexoelectricity and New Phenomena

It is easy to miss the scientific implications of our recent work on Triboelectricity. Everyone knows that rubbing and contact can produce static electricity; less appreciated is that the thermodynamic driver has been an open question since static electricity was first observed by Thales of Miletus around 585 BC. People think they understand it, for instance one common explanation that can still be found in the current literature is that differences in the work function drives charge transfer, often called the Volta-Helmholtz hypothesis. As summarized in 1967 by Harper, this fails to explain many experimental observations, for instance that charging can occur when two pieces of the same material are rubbed against each other. We are the first to place triboelectricity on a solid foundation rooted in quantum mechanics – the flexoelectric effect. We were able to explain a significant number of previously unexplained phenomena: 1) Bipolar tribocurrents associated with stick-slip, due to the change in sign of the strain gradients. 2) A one-third power scaling of tribocurrents with indentation force. 3) Tribocharging when two identical materials are used, these being due to local variations in the asperities so there are usually local potential differences. 4) Inhomogeneous charging of insulators, related to the statistical nature of asperities. 5) An experimentally observed reversal in the sign of charge transfer for negative and positive curvature, which is related to a change in the sign of the strain gradient. Exploiting our DOE prior funded work on flexoelectricity, we obtained semi-quantitative matching to existing experimental measurements of the surface charge in triboelectric experiments. The work has been well received in the literature. The work has been the focus of a number of popular science press articles, and also formed the basis for a Podcast for children 6-10 “The Rise and Fall of Static Man” posted in December 2019 by NPR as part of their “Wow in the World” series. I was also briefly interviewed by the Chicago PBS station in January 2020. This work are significant for a wide range of energy applications; to quote from an independent source: "Triboelectric power has plenty of potential, says Wenzhuo Wu, an assistant professor of engineering at Purdue. If the basics of static electricity are better understood, we could maximize the efficiency of wind or wave power generators, Wu says. The body's own movement could be used to power internal medical devices. Imagine being able to create a roof shaped to harness the power of a raindrop — the friction of the rain passing over the surface — to generate triboelectricity, powering the building below it." This is the start of new science, some of which we already partially understand such as the role of band bending in charge transfer. We need to understand charge transfer combining elasticity, quantum mechanics, band bending and defect states. These directly involve several of the DOE Grand Challenges: "How do we control material processes at the level of electrons? How do remarkable properties of matter emerge from complex correlations of the atomic or electronic constituents and how can we control these properties? How do we characterize and control matter away—especially very far away— from equilibrium?" I will argue that this work truly falls into the class of disruptive science; it is not just a simple extension, linear science. Not everyone will accept the approach. Since we explain far more about triboelectricity than anyone before, the preponderance of evidence supports the model. The feedback I have received is that many agree with the work, to quote: "The model makes sense, says Michael McAlpine, a professor of engineering at the University of Minnesota. "It's such a simple explanation, I was surprised I didn't put my finger on that," McAlpine says." The proposal received strong reviews. It was also publicized on the Department of Energy Web Site.

16 TIDAL AND WAVE POWER↗

The Role of Defect Geometry in Localized Emission from Monolayer Tungsten Dichalcogenides

In two-dimensional transition metal dichalcogenides such as tungsten diselenide (WSe 2 ), single photon emission has been broadly attributed to exciton localization from atomic point defects, yet the precise microscopic origins are unclear. This work introduces an empirically grounded computational framework that explains the origins of facile single photon emission in WSe 2 . High-resolution microscopy identifies native defect geometries in monolayer WSe 2 lattices from which the model is built. Here, the qualitative effects of chalcogen type, defect geometry, and mechanical strain on the electronic structure are individually assessed using density functional theory, and a specific divacancy configuration emerges as the candidate for localized single-electron transitions that match observed spectral energies. Spectroscopy and photon correlation measurements further validate this model, establishing a self-consistent link between defect geometry, electronic structure, and quantum emission.

defect emission↗

Hybrid magnon-phonon localization enhances function near ferroic glassy states

Ferroic materials on the verge of forming ferroic glasses exhibit heightened functionality that is often attributed to competing long- and short-range correlations. However, the physics underlying these enhancements is not well understood. The Ni 45 Co 5 Mn 36.6 In 13.4 Heusler alloy is on the edge of forming both spin and strain glasses and exhibits magnetic field–induced shape memory and large magnetocaloric effects, making it a candidate for multicaloric cooling applications. We show using neutron scattering that localized magnon-phonon hybrid modes, which are inherently spread across reciprocal space, act as a bridge between phonons and magnons and result in substantial magnetic field–induced shifts in the phonons, triple the caloric response, and alter phase stability. We attribute these modes to the localization of phonons and magnons by antiphase boundaries coupled to magnetic domains. Because the interplay between short- and long-range correlations is common near ferroic glassy states, our work provides general insights on how glassiness enhances function.

36 MATERIALS SCIENCE↗