Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Removal of TcO 4 – from Representative Nuclear Waste Streams with Layered Potassium Metal Sulfide Materials

Many efforts have focused on the sequestration and immobilization of 99Tc because the radionuclide is highly mobile in oxidizing environments and presents serious health risks due to its radiotoxicity and long half-life (t1/2 = 213 000 a). One of the more common methods for Tc removal from solution and immobilization in solids is based on reducing Tc from highly soluble Tc(VII) to sparingly soluble Tc(IV). In order to remove solution Tc through this reduction process, the Tc-sequestering solid must contain a reducing agent and, ideally, the Tc-sequestering material would function in a large range of chemical environments. For long-term stability, the reduced Tc would preferentially be incorporated into the resulting mineral structure instead of simply being sorbed onto the mineral surface. Here, we report results obtained from batch sorption experiments performed in anoxic and oxic conditions with two sulfide-containing potassium metal sulfide (KMS) materials, known as KMS-2 and KMS-2-SS. In deionized water in anoxic conditions after 15 d of contact, KMS-2 is capable of removing ~45% of Tc and KMS-2-SS is capable of removing ~90% of Tc. The improved performance of KMS-2-SS compared to KMS-2 in deionized water in anoxic conditions appears to be linked both to a higher pH resulting from the batch sorption experiments performed with KMS-2-SS and a higher overall purity of KMS-2-SS. Both materials perform even better in highly caustic (pH~13.5), high ionic strength (8.0 M) simulated Hanford low-activity waste solutions, removing more than 90% Tc after 15 d of contact in anoxic conditions. Post-reaction solids analysis indicate that Tc(VII) is reduced to Tc(IV) and that Tc(IV) is bonded to S atoms in the resulting KMS-2 structure in a Tc2S7 form. In contrast to previous ion exchange experiments with other KMS materials, the batch sorption experiments examining Tc removal cause the initially crystalline KMS materials to lose much of their initial long-range order.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2017

Mesoscale Elucidation of Solid Electrolyte Interphase Layer Formation in Li-Ion Battery Anode

Capacity fade in lithium-ion batteries largely originates from the undesired electrolyte decomposition, which results in the formation of solid electrolyte interphase (SEI) and the anode surface passivation. In this work, a mesoscale interfacial modeling approach is developed to investigate the formation and growth of the SEI film on a typical graphite based anode over several cycles. It is found that lithium diffusion kinetics in the SEI film significantly affects the SEI growth rate. A lower lithium diffusion barrier leads to a higher growth rate. The present model demonstrates that the SEI thickness is a linear function of the square root of the charging time over long-time cycling. Growth of multicomponent SEI film is also elucidated. It is found that the heterogeneity of the SEI film may lead to instability in lithium ion concentration distribution.

25 ENERGY STORAGE↗
DOE OSTI2018

Investigation of Solid Electrolyte Interphase Layer Formation and Electrochemical Reversibility of Magnetite, Fe 3 O 4 , Electrodes: A Combined X-ray Absorption Spectroscopy and X-ray Photoelectron Spectroscopy Study

Magnetite (Fe 3 O 4 ) is a promising electrode material for the next generation of Li-ion batteries with multiple electron transfers per metal center and a theoretical capacity of 924 mAh/g. However, multiple phase conversions during (de)lithiation of Fe 3 O 4 and formation of a surface electrolyte interphase (SEI) contribute to capacity fade. In this study, X-ray Absorption Spectroscopy (XAS), and X-ray Photoelectron Spectroscopy (XPS) were used to determine the surface chemistry, redox chemistry, and the impact on the electrochemical reversibility in the presence and absence of fluoroethylene carbonate (FEC) solvent. With FEC improved capacity retention and enhanced reversibility are observed. In contrast, electrodes cycled with no FEC exhibit decreased reversibility where the active material remains as reduced Fe 0 . XPS results reveal LiF and lower quantities of oxygen containing species, especially carbonates at the electrode surface tested in FEC. The improvement in electrochemical reversibility with FEC is attributed to the formation of a solid electrolyte interphase which forms prior to initiation of the conversion reaction limiting SEI growth on the reduced products, Fe0 and Li 2 O. In contrast, EC-based carbonate electrolyte forms SEI at a potential where formation of Fe0 and Li 2 O has already initiated resulting in SEI formation on Fe 0 nanograins.

25 ENERGY STORAGE↗
DOE OSTI2017

Nonlinear Layer-by-Layer Films: Effects of Chain Diffusivity on Film Structure and Swelling

Here in this paper, we report on the role of molecular diffusivity in the formation of nonlinearly growing polyelectrolyte multilayers (nlPEMs). Electrostatically bound polyelectrolyte multilayers were assembled from poly(methacrylic acid) (PMAA) as a polyanion and quaternized poly(2-(dimethylamino)ethyl methacrylate) (QPC) as a polycation. Film growth as measured by ellipsometry was strongly dependent on the time allowed for each polymer deposition step, suggesting that the diffusivities of the components are crucial in controlling the rate of film growth. Uptake of polyelectrolytes within nlPEMs was relatively slow and occurred on time scales ranging from minutes to hours, depending on the film thickness. Spectroscopic ellipsometry measurements with nlPEM films exposed to aqueous solutions exhibited high (severalfold) degrees of film swelling and different swelling values for films exposed to QPC or PMAA solutions. FTIR spectroscopy showed that the average ionization of film-assembled PMAA increased upon binding of QPC and decreased upon binding of PMAA, in agreement with the charge regulation mechanism for weak polyelectrolytes. The use of neutron reflectometry (NR) enabled quantification of chain intermixing within the film, which was drastically enhanced when longer times were allowed for polyelectrolyte deposition. Diffusion coefficients of the polycation derived from the uptake rates of deuterated chains within hydrogenated films were of the order of 10 –14 cm 2 /s, i.e., 5–6 orders of magnitude smaller than those found for diffusion of free polymer chains in solution. Exchange of the polymer solutions to buffer inhibited film intermixing. Taken together, these results contribute to understanding the mechanism of the growth of nonlinear polyelectrolyte multilayers and demonstrate the possibility of controlling film intermixing, which is highly desirable for potential future applications.

36 MATERIALS SCIENCE↗